Sorting of Semiconducting Single-Walled Carbon Nanotubes in Polar Solvents with an Amphiphilic Conjugated Polymer Provides General Guidelines for Enrichment

Efficient Sorting of Semiconducting Single-Walled Carbon Nanotubes in Bio-Renewable Solvents Through Main-Chain Engineering of Conjugated Polymers

Conjugated polymer sorting is recognized as an efficient and scalable method for the selective extraction of semiconducting single-walled carbon nanotubes (s-SWCNTs). However, this process typically requires the use of nonpolar and aromatic solvents as the dispersion medium, which are petroleum-based and carry significant production hazards. Moreover, there is still potential for improving the efficiency of batch purification. Here, this study presents fluorene-based conjugated polymer that integrates diamines containing ethylene glycol chains (ODA) as linkers within the main chain, to effectively extract s-SWCNTs in bio-renewable solvents. The introduction of ODA segments enhances the solubility in bio-renewable solvents, facilitating effective wrapping of s-SWCNTs in polar environments. Additionally, the ODA within the main chain enhances affinity to s-SWCNTs, thereby contributing to increased yields and purity. The polymer achieves a high sorting yield of 55% and a purity of 99.6% in dispersion of s-SWCNTs in 2-Methyltetrahydrofuran. Thin-film transistor arrays fabricated with sorted s-SWCNTs solution through slot-die coating exhibit average charge carrier mobilities of 20-23 cm2 V⁻¹ s⁻¹ and high on/off current ratios exceeding 105 together with high spatial uniformity. This study highlights the viability of bio-renewable solvents in the sorting process, paving the way for the eco-friendly approach to the purification of SWCNTs.

High-Performance Semiconducting Carbon Nanotube Transistors Using Naphthalene Diimide-Based Polymers with Biaxially Extended Conjugated Side Chains

Polymer-wrapped single-walled carbon nanotubes (SWNTs) are a potential method for obtaining high-purity semiconducting (sc) SWNT solutions. Conjugated polymers (CPs) can selectively sort sc-SWNTs with different chiralities, and the structure of the polymer side chains influences this sorting capability. While extensive research has been conducted on modifying the physical, optical, and electrical properties of CPs through side-chain modifications, the impact of these modifications on the sorting efficiency of sc-SWNTs remains underexplored. This study investigates the introduction of various conjugated side chains into naphthalene diimide-based CPs to create a biaxially extended conjugation pattern. The CP with a branched conjugated side chain (P3) exhibits reduced aggregation, resulting in improved wrapping ability and the formation of larger bundles of high-purity sc-SWNTs. Grazing incidence X-ray diffraction analysis confirms that the potential interaction between sc-SWNTs and CPs occurs through π-π stacking. The field-effect transistor device fabricated with P3/sc-SWNTs demonstrates exceptional performance, with a significantly enhanced hole mobility of 4.72 cm2 V-1 s-1 and high endurance/bias stability. These findings suggest that biaxially extended side-chain modification is a promising strategy for improving the sorting efficiency and performance of sc-SWNTs by using CPs. This achievement can facilitate the development of more efficient and stable electronic devices.

Size Matters in Conjugated Polymer Chirality-Selective SWCNT Extraction

Carbon-based nanomaterials have catalyzed breakthroughs across various scientific and engineering disciplines. The key to unlocking a new generation of tailor-made nanomaterials based on single-walled carbon nanotubes (SWCNTs) lies in the precise sorting of raw material into individual chiralities, each possessing unique properties. This can be achieved using conjugated polymer extraction (CPE), but to a very limited extent since the process generates only a few chirality-enriched suspensions. Therefore, it is imperative to comprehend the mechanism of the wrapping of SWCNTs by polymers to unleash CPE's full potential. However, the lack of a diverse palette of chirality-selective polymers with varying macromolecular parameters has hindered a comprehensive understanding of how the nature of the polymer affects the performance and selectivity of SWCNT isolation. To address this gap, multiple batches of such polymers are synthesized to elucidate the impact of molecular weight and dispersity on the purity and concentrations of the generated SWCNT suspensions. The obtained results explain the inconsistent outcomes reported in the literature, greatly improving the application potential of this promising SWCNT sorting approach. Concomitantly, the discovered significant influence of the macromolecular characteristics of conjugated polymers on the SWCNT isolation efficacy sheds considerable insight into the unresolved mechanism of this sorting technique.

Semiconducting Carbon Nanotube Extraction Enabled by Alkylated Cellulose Wrapping

With the growing demand for postsilicon electronics, the purification of single-walled carbon nanotubes (SWCNTs) in terms of their chirality, which defines their atomic and electronic structure, is becoming increasingly important. Herein, we demonstrate the selective extraction of high-quality semiconducting SWCNTs using alkyl cellulose as a dispersant in organic solvents. We investigated the separation factors of dispersant structures, such as the degree of substitution (DS) and molecular weight, and clarified the appropriate dispersant structures, such as moderately substituted hexyl cellulose, for selective semiconducting SWCNT extraction. Due to the improved purity and quality of the semiconducting SWCNTs obtained by this method, their films exhibit excellent thermoelectric power factors, outperforming not only unsorted SWCNTs but also conducting polymer-sorted SWCNTs. This sorting technology paves the way for supplying high-quality semiconducting SWCNTs in a viable manner.

Two-component polymer sorting to obtain high-purity s-SWCNTs for all-carbon photodetectors

The advancement of carbon-based electronics is reliant on the development of semiconducting carbon nanotubes with high purity and yield. We developed a new extraction strategy to efficiently sort SWCNTs with superior yields and purity. The approach uses two polymers, poly[N-(1-octylnonyl)-9H-carbazol-2,7-diyl](PCz) and poly(9,9-n-dihexyl-2,7-fluorene-alt-9-phenyl-3,6-carbazole)(PDFP), and two sonication processes to eliminate surface polymer contamination. PCz selectively wraps large-diameter s-SWCNTs, with PDFP added as an enhancing molecule to increase sorting efficiency at 4-fold compared to the efficiency of only PCz alone sorting. The purity of the sorted s-SWCNTs was confirmed to be above 99 % using absorption and Raman spectra. Field-effect transistors and photodetectors made from the sorted s-SWCNTs exhibited excellent semiconductor properties and broad-spectrum detection, with good long-term stability. Furthermore, a photodetector using large-tube diameter s-SWCNTs achieved broad-spectrum detection, which the photoresponsivity is 0.35 mA/W and the detectivity is 4.7×106 Jones. The s-SWCNTs/graphene heterojunction photodetector achieved a photoresponsivity of 3 mA/W and a detectivity of 6.3×106 Jones. This new strategy provides a promising approach to obtain high-purity and high-yield s-SWCNTs for carbon-based photodetectors.

Mixed-Solvent Engineering as a Way around the Trade-Off between Yield and Purity of (7,3) Single-Walled Carbon Nanotubes Obtained Using Conjugated Polymer Extraction

The inability to purify nanomaterials such as single-walled carbon nanotubes (SWCNTs) to the desired extent hampers the progress in nanoscience. Various SWCNT types can be purified by extraction, but it is challenging to establish conditions giving rise to the isolation of high-purity fractions. The problem stems from the fact that common organic solvents or water cannot provide an optimal environment for purification. Consequently, one must often decide between the separation yield and purity of the product. This article reports how through the self-synthesis of poly(9,9-dioctylfluorene-alt-benzothiadiazole) with tailored characteristics, in-depth elucidation of the extraction process, and mixed-solvent engineering, a high-yield isolation of monochiral (7,3) SWCNTs is developed. The combination of toluene and tetralin affords a separation medium of unique properties, wherein both high yield and exceptional purity can be attained simultaneously. The reported results pave the way for further research on this rare chirality, which, as illustrated herein, is much more reactive than any of the previously separated SWCNTs.

Interlocking Matrix and Filler for Enhanced Individualization and Reinforcement in Polymer-Single-Walled Carbon Nanotube Composites

Poor individualization and interfacial adhesion prevent single-walled carbon nanotube (SWNT)-polymer composites from reaching outstanding mechanical properties. With much larger diameters, but common structural features (high aspect ratio and absence of functional groups for covalent or supramolecular attachment with the polymer), carbon fibers face similar problems, which are addressed by covering the fibers with a thin layer of polymer. This sizing strategy has allowed carbon fibers to become the filler of choice for the highest performing materials. Inspired by this, here we investigate the use of the mechanical bond to wrap SWNTs with a layer of polymeric material to produce SWNTs mechanically interlocked with a layer of polymer. We first validate the formation of mechanically interlocked nanotubes (MINTs) using mixtures of SWNTs of relatively large average diameter (1.6 ± 0.4 nm), which are commercially available at reasonable prices and therefore could be technologically relevant as polymer fillers. We then design and synthesize by ring-opening metathesis polymerization (ROMP) a polymer decorated with multiple U-shaped molecules, which are later ring-closed around the SWNTs using metathesis. The obtained hybrids contain a high degree of individualized SWNTs and exhibit significantly increased mechanical properties when compared to the matrix polymer. We envision that this strategy could be employed to produce SWNTs interlocked with polymer layers with various designs for polymer reinforcement.

Understanding the partitioning behavior of single-walled carbon nanotubes using an aqueous two-phase extraction system composed of non-ionic surfactants and polymers

In this work, a Pluronic/Dextran system was developed to discover the mechanism of the aqueous two-phase extraction (ATPE) technique, which is widely employed for the sorting of single-walled carbon nanotubes (SWCNTs) and other types of nanomaterials. The role of the phase-forming components and partitioning modulators was comprehensively investigated to gain greater insights into the differentiation process. The obtained results revealed that sodium dodecyl sulfate and sodium dodecylbenzene sulfonate operated as excellent partitioning modulators, enabling the diameter-based sorting of SWCNTs. Additionally, the data strongly suggested that different densities of various SWCNT species drove the movement of SWCNTs in the ATPE system. Consequently, the largest diameter SWCNTs were first influenced by surfactants and, thus, the nanotubes migrated towards a lower density top phase in the following order (7,5) > (8,3) > (6,5) > (6,4). Based on the in-depth analysis of the partitioning system, a mechanism was proposed that described the method in which the popular ATPE separation technique operates.

Broadband Full-Spectrum Raman Excitation Mapping Reveals Intricate Optoelectronic-Vibrational Resonance Structure of Chirality-Pure Single-Walled Carbon Nanotubes

The Raman excitation spectra of chirality-pure (6,5), (7,5), and (8,3) single-walled carbon nanotubes (SWCNTs) are explored for homogeneous solid film samples over broad excitation energy and scattering energy ranges using a rapid and relatively simple full spectrum Raman excitation mapping technique. Identification of variation in scattering intensity with sample type and phonon energy related to different vibrational bands is clearly realized. Excitation profiles are found to vary strongly for different phonon modes. Some modes' Raman excitation profiles are extracted, with the G band profile compared to earlier work. Other modes, such as the M and iTOLA modes, have quite sharp resonance profiles and strong resonances. Conventional fixed wavelength Raman spectroscopy can miss these effects on the scattering intensities entirely due to the significant intensity changes observed for small variations in excitation wavelength. Peak intensities for phonon modes traceable to a pristine carbon lattice forming a SWCNT sidewall were greater for high-crystallinity materials. In the case of highly defective SWCNTs, the scattering intensities of the G band and the defect-related D band are demonstrated to be affected both in absolute intensities and in relative ratio, with the ratio that would be measured by single wavelength Raman scattering dependent on the excitation wavelength due to differences in the resonance energy profiles of the two bands. Lastly it is shown that the approach of this contribution yields a clear path toward increasing the rigor and quantification of resonance Raman scattering intensity measurements through tractable corrections of excitation and emission side variations in efficiency with excitation wavelength.

Nanotube abundance from non-negative matrix factorization of Raman spectra as an example of chemical purity from open source machine learning

The chemical purity of materials is important for semiconductors, including the carbon nanotube material system, which is emerging in semiconductor applications. One approach to get statistically meaningful abundances and/or concentrations is to measure a large number of small samples. Automated multivariate classification algorithms can be used to draw conclusions from such large data sets. Here, we use spatially-mapped Raman spectra of mixtures of chirality-sorted single walled carbon nanotubes dispersed sparsely on flat silicon/silicon oxide substrates. We use non-negative matrix factorization (NMF) decomposition in scikit-learn, an open-source, python language “machine learning” package, to extract spectral components and derive weighting factors. We extract the abundance of minority species (7,5) nanotubes in mixtures by testing both synthetic data, and real samples prepared by dilution. We show how noise limits the purity level that can be evaluated. We determine real situations where this approach works well, and identify situations where it fails.

Enhancing Electrochemical Transistors Based on Polymer-Wrapped (6,5) Carbon Nanotube Networks with Ethylene Glycol Side Chains

Organic electrochemical transistors (ECTs) are an important building block for bioelectronics. To promote the required ion transport through the active layer, state-of-the-art semiconducting polymers feature hydrophilic ethylene glycol side chains that increase the volumetric capacitance and transconductance of the devices. Here, we apply this concept to polymer-wrapped single-walled carbon nanotubes (SWCNTs) as a high-mobility semiconducting material. We replace the polyfluorene copolymer (PFO-BPy), which is used for selectively dispersing semiconducting (6,5) SWCNTs and contains octyl side chains, by an equivalent polymer with tetraethylene glycol side chains. Aerosol-jet printed networks of these SWCNTs are applied as the active layer in water-gated ECTs. These show high hole mobilities (3-15 cm²·V^-1·s^-1), significantly improved volumetric capacitances and larger transconductances. Thin networks of SWCNTs reach (219 ± 16) F·cm^-1·V^-1·s^-1 as the product of mobility and volumetric capacitance. In situ photoluminescence measurements show more efficient quenching of the near-infrared fluorescence for nanotube networks with hydrophilic glycol side chains compared to those with hydrophobic alkyl side chains, thus corroborating more complete charging under bias. Overall, networks of semiconducting SWCNTs with such tailored wrapping polymers provide excellent device performance. Combined with their inherent mechanical flexibility and durability, they constitute a competitive material for bioelectronics.

Nanosensor Detection of Synthetic Auxins In Planta using Corona Phase Molecular Recognition

Synthetic auxins such as 1-naphthalene acetic acid (NAA) and 2,4-dichlorophenoxyacetic acid (2,4-D) have been extensively used in plant tissue cultures and as herbicides because they are chemically more stable and potent than most endogenous auxins. A tool for rapid in planta detection of these compounds will enhance our knowledge about hormone distribution and signaling and facilitate more efficient usage of synthetic auxins in agriculture. In this work, we show the development of real-time and nondestructive in planta NAA and 2,4-D nanosensors based on the concept of corona phase molecular recognition (CoPhMoRe), to replace the current state-of-the-art sensing methods that are destructive and laborious. By designing a library of cationic polymers wrapped around single-walled carbon nanotubes with general affinity for chemical moieties displayed on auxins and its derivatives, we developed selective sensors for these synthetic auxins, with a particularly large quenching response to NAA (46%) and a turn-on response to 2,4-D (51%). The NAA and 2,4-D nanosensors are demonstrated in planta across several plant species including spinach, Arabidopsis thaliana (A. thaliana), Brassica rapa subsp. chinensis (pak choi), and Oryza sativa (rice) grown in various media, including soil, hydroponic, and plant tissue culture media. After 5 h of 2,4-D supplementation to the hydroponic medium, 2,4-D is seen to accumulate in susceptible dicotyledon pak choi leaves, while no uptake is observed in tolerant monocotyledon rice leaves. As such, the 2,4-D nanosensor had demonstrated its capability for rapid testing of herbicide susceptibility and could help elucidate the mechanisms of 2,4-D transport and the basis for herbicide resistance in crops. The success of the CoPhMoRe technique for measuring these challenging plant hormones holds tremendous potential to advance the plant biology study.

The Impacts of Polyisoprene Physical Interactions on Sorting of Single-Wall Carbon Nanotubes

Conjugated polymer sorting is currently the best method to select large-diameter single-walled carbon nanotubes (SWCNTs) with tunable narrow chirality in the adaption of highly desired electronics applications. The acceleration on conjugated polymers-SWCNTs interaction with long-term stability through different molecular designs; for example, longer alkyl side-chains or conjugation moieties have been extensively developed in recent years. However, the importance of the macromolecules with abundant van der Waals (VDW) interaction in the conjugated-based block copolymer system acting during SWCNTs sorting is not clearly demonstrated. In this work, a conjugated diblock copolymer involving polyisoprene (PI) and highly dense π-interaction of poly (9,9-dioctylfluorene) (PFO) is utilized to investigate the impact of natural rubber PI physical interaction on sorting effectiveness and stability. Through the rational design of diblock copolymer, PFO with ≈1200 isoprene units can remarkably enhance SWCNTs sorting ability and selected few chiralities with a diameter of ≈0.83-1.1 nm and highly stable solution for more than 1 year. The introduction of long-chain PI system is attributed not only to form weak VDW force with SWCNTs and strengthen the wrapping of PFO around the semiconducting SWCNTs but also to act as a barrier among nanotubes to prevent reaggregation of sorted SWCNTs.

Host-Guest Molecular Interaction Enabled Separation of Large-Diameter Semiconducting Single-Walled Carbon Nanotubes

Semiconducting single-walled carbon nanotubes (s-SWCNTs) with a diameter of around 1.0-1.5 nm, which present bandgaps comparable to silicon, are highly desired for electronic applications. Therefore, the preparation of s-SWCNTs of such diameters has been attracting great attention. The inner surface of SWCNTs has a suitable curvature and large contacting area, which is attractive in host-guest chemistry triggered by electron transfer. Here we reported a strategy of host-guest molecular interaction between SWCNTs and inner clusters with designed size, thus selectively separating s-SWCNTs of expected diameters. When polyoxometalate clusters of ∼1 nm in size were filled in the inner cavities of SWCNTs, s-SWCNTs with diameters concentrated at ∼1.3-1.4 nm were selectively extracted with the purity of ∼98% by a commercially available polyfluorene derivative. The field-effect transistors built from the sorted s-SWCNTs showed a typical behavior of semiconductors. The sorting mechanisms associated with size-dependent electron transfer from nanotubes to inner polyoxometalate were revealed by the spectroscopic and in situ electron microscopic evidence as well as the theoretical calculation. The polyoxometalates with designable size and redox property enable the flexible regulation of interaction between the nanotubes and the clusters, thus tuning the diameter of sorted s-SWCNTs. The present sorting strategy is simple and should be generally feasible in other SWCNT sorting techniques, bringing both great easiness in dispersant design and improved selectivity.

Sorting and decoration of semiconducting single-walled carbon nanotubes via the quaternization reaction

A study for the selective separation and functionalization of alcohol-soluble semiconducting single-walled carbon nanotubes (sc-SWCNTs) is carried out by polymer main-chain engineering. Introducing tertiary amine groups endows the functionalized sc-SWCNTs with alcohol-soluble properties and introducing the pyrimidine rings allows to increase the selective purity of sc-SWCNTs. In this study, a series of poly[(9,9-dioctylfluorene)-2,7-(9,9-bis(3'-(N,N-dimethylamino)propyl)-fluorene)] m -alt-[2-methylpyrimidine-2,7-(9,9-dioctylfluorene)] n (PFPy) are used for the selective dispersion of semiconducting single-walled carbon nanotubes, where n and m are the composition ratio of the copolymer. When m = n, the effective isolation of sc-SWCNTs with purity greater than 99% is achieved. The alcohol-soluble sc-SWCNTs with a diameter in the range of 1.1-1.4 nm are obtained through designing reasonable molecular structure. Moreover, the particular preference of PFPy (m = n) for sc-SWCNTs was studied via density functional theory (DFT) calculations and it was proved to be a promising method for the separation and functionalization of sc-SWCNTs.

Printed carbon nanotube thin-film transistors: progress on printable materials and the path to applications

Printing technologies have attracted significant attention owing to their potential use in the low-cost manufacturing of custom or large-area flexible electronics. Among the many printable electronic materials that have been explored, semiconducting carbon nanotubes (CNTs) have shown increasing promise based on their exceptional electrical and mechanical properties, relative stability in air, and compatibility with several printing techniques to form semiconducting thin films. These attractive attributes make printed CNT thin films promising for applications including, but not limited to, sensors and display backplanes - at the heart of which is electronics' most versatile device: the transistor. In this review, we present a summary of recent advancements in the field of printed carbon nanotube thin-film transistors (CNT-TFTs). In addition to an introduction of different printing techniques, together with their strengths and limitations, we discuss key aspects of ink/material selection and processing of various device components, including the CNT channels, contacts, and gate insulators. It is clear that printed CNT-TFTs are rapidly advancing, but there remain challenges, which are discussed along with current techniques to resolve them and future developments towards practical applications from these devices. There has been interest in low-cost, printable transistors for many years and the CNT-TFTs show great promise for delivering, but will not become a reality without further research advancement.

Enrichment of Semiconducting Single-Walled Carbon Nanotubes with Indigo-Fluorene-Based Copolymers and Their Use in Printed Thin-Film Transistors and Carbon Dioxide Gas Sensors

High-purity semiconducting single-walled carbon nanotubes (sc-SWCNTs) are promising for portable and high-sensitivity gas sensors because of their excellent physical and electrical properties. Here, we describe the synthesis of a novel indigo-fluorene-based copolymer (PFIDBoc) that has been designed to selectively enrich sc-SWCNTs with excellent purity (>99.9%) yet contain a latent function in the form of a tert-butoxy (t-BOC)-protected amine that can be later revealed and exploited for carbon dioxide (CO₂) gas sensing. SWCNTs wrapped with the PFIDBoc polymer can be easily converted via an on-chip thermal process to reveal a vinylogous amide moiety with a secondary amine nitrogen within the indigo building block of the copolymer which is perfectly suited for CO₂ recognition. Thin-film transistors and sensors were inkjet-printed onto rigid and flexible substrates, demonstrating the versatility of enriched PFIDBoc-derived sc-SWCNT dispersions. The printed transistors exhibited a mobility up to 9 cm² V^-1 s^-1 and on/off current ratios >10⁵. We further demonstrate herein a CO₂ sensor for indoor air quality monitoring even in low humidity environments, possessing a linear response with up to ∼5.4% sensitivity and a dynamic range between 400 and 2000 ppm in air with a relative humidity of ∼ 40%.

Separation of Semiconducting Carbon Nanotubes Using Conjugated Polymer Wrapping

In the past two decades, single-walled carbon nanotubes (SWNTs) have been explored for electronic applications because of their high charge carrier mobility, low-temperature solution processability and mechanical flexibility. Semiconducting SWNTs (s-SWNTs) are also considered an alternative to traditional silicon-based semiconductors. However, large-scale, as-produced SWNTs have poor solubility, and they are mixtures of metallic SWNTs (m-SWNTs) and s-SWNTs, which limits their practical applications. Conjugated polymer wrapping is a promising method to disperse and separate s-SWNTs, due to its high selectivity, high separation yield and simplicity of operation. In this review, we summarize the recent progress of the conjugated polymer wrapping method, and discuss possible separation mechanisms for s-SWNTs. We also discuss various parameters that may affect the selectivity and sorting yield. Finally, some electronic applications of polymer-sorted s-SWNTs are introduced. The aim of this review is to provide polymer chemist a basic concept of polymer based SWNT separation, as well as some polymer design strategies, influential factors and potential applications.

Engineering Supramolecular Polymer Conformation for Efficient Carbon Nanotube Sorting

Supramolecular polymer sorting is a promising approach to separating single-walled carbon nanotubes (CNTs) by electronic type. Unlike conjugated polymers, they can be easily removed from the CNTs after sorting by breaking the supramolecular bonds, allowing for isolation of electronically pristine CNTs as well as facile recycling of the sorting polymer. However, little is understood about how supramolecular polymer properties affect CNT sorting. Herein, chain stoppers are used to engineer the conformation of a supramolecular sorting polymer, thereby elucidating the relationship between sorting efficacy and polymer conformation. Through NMR and UV-vis spectroscopy, small-angle X-ray scattering (SAXS), and thermodynamic modeling, it is shown that this supramolecular polymer exhibits ring-chain equilibrium, and that this equilibrium can be skewed toward chains by the addition of chain stoppers. Furthermore, by controlling the stopper-monomer ratio, the sorting yield can be doubled from 7% to 14% without compromising the semiconducting purity (>99%) or properties of sorted CNTs.

Chirality Pure Carbon Nanotubes: Growth, Sorting, and Characterization

Single-walled carbon nanotubes (SWCNTs) have been attracting tremendous attention owing to their structure (chirality) dependent outstanding properties, which endow them with great potential in a wide range of applications. The preparation of chirality-pure SWCNTs is not only a great scientific challenge but also a crucial requirement for many high-end applications. As such, research activities in this area over the last two decades have been very extensive. In this review, we summarize recent achievements and accumulated knowledge thus far and discuss future developments and remaining challenges from three aspects: controlled growth, postsynthesis sorting, and characterization techniques. In the growth part, we focus on the mechanism of chirality-controlled growth and catalyst design. In the sorting part, we organize and analyze existing literature based on sorting targets rather than methods. Since chirality assignment and quantification is essential in the study of selective preparation, we also include in the last part a comprehensive description and discussion of characterization techniques for SWCNTs. It is our view that even though progress made in this area is impressive, more efforts are still needed to develop both methodologies for preparing ultrapure (e.g., >99.99%) SWCNTs in large quantity and nondestructive fast characterization techniques with high spatial resolution for various nanotube samples.

Enrichment of highly pure large-diameter semiconducting SWCNTs by polyfluorene-containing pyrimidine ring

The use of copolymers to extract and purify semiconducting SWCNTs (sc-SWCNTs) and metallic SWCNTs (m-SWCNTs) is widely employed. In this paper, the performances of two pyrimidine-alt-dioctylfluorene conjugated polymers in the enrichment of semiconducting SWCNTs are compared, and the subtle structural effects on them are discussed. It was found that both pyrimidine-polymers were more effective in wrapping the semiconducting SWCNTs than the metallic SWCNTs under the co-action of the pyrimidine and fluorene rings. Moreover, methyl groups on the pyrimidine ring of the polymer slightly contributed to the semiconducting purity, and the minor differences of sc-SWCNTs extraction between two pyrimidine-polymers are compared. Additionally, the average diameter of the selected SWCNTs is larger than that of the raw SWCNTs. The experimental results show the excellent selectivity for sc-SWCNT from both co-polymers: the index Φ i values for determining the purity of sc-SWCNTs were increased from 0.408 for P2 to 0.465 for P1, of which the selected sc-SWCNT purity is up to 99.9%. The resulting purity and the inexpensive availability of pyrimidine co-polymers make them suitable to be considered for effective sc-SWCNT enrichment.

Enrichment of large-diameter semiconducting single-walled carbon nanotubes by a mixed-extractor strategy

In this work, we report a new mixed-extractor strategy to improve the sorting yield of large-diameter semiconducting single-walled carbon nanotubes (s-SWCNTs) with high purity. In the new mixed-extractor strategy, two kinds of conjugated polymers with different rigidity, poly(9,9-n-dihexyl-2,7-fluorene-alt-9-phenyl-3,6-carbazole) (PDFP) and poly(9,9-dioctylfluorene-alt-benzothiadiazole) (P8BT), are used to sort large-diameter s-SWCNTs through two simple sonication processes. To our surprise, although PDFP itself shows no selectivity toward s-SWCNTs, it can greatly enhance the sorting yield of P8BT. Using the PDFP/P8BT mixed-extractor method, the yield of sorted s-SWCNTs has been enhanced by 5 times with a purity above 99 % in comparison to that using P8BT single-extractor method. In addition, the photoluminescence (PL) excitation maps shows that the PDFP/P8BT mixed-extractor system not only enhances the sorting yield substantially, but also tends to be enrichment of (15,4) SWCNTs with the diameter of 1.36 nm.

Aqueous two-polymer phase extraction of single-wall carbon nanotubes using surfactants

This review details the current state of the art in aqueous two-phase extraction (ATPE) based separations of surfactant dispersed single-wall carbon nanotubes by their chemical species, i.e., (n,m) structure, semiconducting or metallic nature, and enantiomeric handedness. Discussions of the factors affecting each separation, including workflow effects, variations of different surfactant and nanotube materials, and the underlying physical mechanism are presented. Lastly an outlook on the applications of ATPE at bench scale and implementation to larger scales is discussed, along with identification of research directions that could further support ATPE development.

Optoelectronic Properties of Printed Photogating Carbon Nanotube Thin Film Transistors and Their Application for Light-Stimulated Neuromorphic Devices

Artificial synapses/neurons based on electronic/ionic hybrid devices have attracted wide attention for brain-inspired neuromorphic systems since it is possible to overcome the von Neumann bottleneck of the neuromorphic computing paradigm. Here, we report a novel photoneuromorphic device based on printed photogating single-walled carbon nanotube (SWCNT) thin film transistors (TFTs) using lightly n-doped Si as the gate electrode. The drain currents of the printed SWCNT TFTs can gradually increase to over 3000 times of their starting value after being pulsed with light stimulation, and the electrical signals can maintain for over 10 min. These characteristics are similar to the learning and memory functions of brain-inspired neuromorphic systems. The working mechanism of the light-stimulated neuromorphic devices is investigated and described here in detail. Important synaptic characteristics, such as low-pass filtering characteristics and nonvolatile memory ability, are successfully emulated in the printed light-stimulated artificial synapses. It demonstrates that the printed SWCNT TFT photoneuromorphic devices can act as the nonvolatile memory units and perform photoneuromorphic computing, which exhibits potential for future neuromorphic system applications.

Solution-Processing of High-Purity Semiconducting Single-Walled Carbon Nanotubes for Electronics Devices

High-purity semiconducting single-walled carbon nanotubes (s-SWCNTs) are of paramount significance for the construction of next-generation electronics. Until now, a number of elaborate sorting and purification techniques for s-SWCNTs have been developed, among which solution-based sorting methods show unique merits in the scale production, high purity, and large-area film formation. Here, the recent progress in the solution processing of s-SWCNTs and their application in electronic devices is systematically reviewed. First, the solution-based sorting and purification of s-SWCNTs are described, and particular attention is paid to the recent advance in the conjugated polymer-based sorting strategy. Subsequently, the solution-based deposition and morphology control of a s-SWCNT thin film on a surface are introduced, which focus on the strategies for network formation and alignment of SWCNTs. Then, the recent advances in electronic devices based on s-SWCNTs are reviewed with emphasis on nanoscale s-SWCNTs' high-performance integrated circuits and s-SWCNT-based thin-film transistors (TFT) array and circuits. Lastly, the existing challenges and development trends for the s-SWCNTs and electronic devices are briefly discussed. The aim is to provide some useful information and inspiration for the sorting and purification of s-SWCNTs, as well as the construction of electronic devices with s-SWCNTs.