Introduction of Protonated Sites on Exfoliated, Large-Area Sheets of Hexagonal Boron Nitride

Dispersing boron nitride nanosheets with carboxymethylated cellulose nanofibrils for strong and thermally conductive nanocomposite films with improved water-resistance

BNNS (boron nitride nanosheets)-CNF (cellulose nanofibrils) nanocomposite films have attracted increasing attention for advanced thermal management applications. However, the nanocomposite films reported so far generally suffer from unsatisfactory overall performance, especially for thermal conductivity and tensile strength. In this work, a nanocomposite film with excellent overall performance was prepared by using CCNF1.2 (carboxymethylated CNF with 1.2 mmol·g-1 carboxyl content) simultaneously as effective dispersant and reinforcement matrix for BNNS. The high aspect ratio of CCNF1.2 is primarily responsible for its excellent dispersion capability for BNNS, which provides strong steric hindrance repulsion force. Meanwhile, CCNF1.2 manifests the strongest hydrophobic-hydrophobic interactions with BNNS, and its carboxyl groups completely interact with the -OH of BNNS by hydrogen bonding. As a result, the BNNS-CCNF1.2 film (50 wt% BNNS) exhibits compacted aligned structure and superior comprehensive performance (125.0 MPa tensile strength, 17.3 W·m-1·K-1 in-plane thermal conductivity, and improved water resistance). This work demonstrates the effectiveness of CCNF in improving the overall performance of BNNS-CNF films and paves the way for their practical application in the advanced thermal management of next-generation electronic devices.

Hexagonal boron nitride exfoliation and dispersion

Research on hexagonal boron nitride (hBN) 2-dimensional nanostructures has gained traction due to their unique chemical, thermal, and electronic properties. However, to make use of these exceptional properties and fabricate macroscopic materials, hBN often needs to be exfoliated and dispersed in a solvent. In this review, we provide an overview of the many different methods that have been used for dispersing hBN. The approaches that will be covered in this review include solvents, covalent functionalization, acids and bases, surfactants and polymers, biomolecules, intercalating agents, and thermal expansion. The properties of the exfoliated sheets obtained and the dispersions are discussed, and an overview of the work in the field throughout the years is provided.

Surface engineering of two-dimensional hexagonal boron-nitride for optoelectronic devices

Two-dimensional hexagonal boron nitride (2D h-BN) is being extensively studied in optoelectronic devices due to its electronic and photonic properties. However, the controlled optimization of h-BN's insulating properties is necessary to fully explore its potential in energy conversion and storage devices. In this work, we engineered the surface of h-BN nanoflakes via one-step in situ chemical functionalization using a liquid-phase exfoliation approach. The functionalized h-BN (F-h-BN) nanoflakes were subsequently dispersed on the surface of TiO2 to tune the TiO2/QDs interface of the optoelectronic device. The photoelectrochemical (PEC) devices based on TiO2/F-h-BN/QDs with optimized addition of carbon nanotubes (CNTs) and scattering layers showed 46% improvement compared to the control device (TiO2/QDs). This significant improvement is attributed to the reduced trap/carrier recombination and enhanced carrier injection rate of the TiO2-CNTs/F-h-BN/QDs photoanode. Furthermore, by employing an optimized TiO2-CNTs/F-h-BN/QDs photoanode, QDs-sensitized solar cells (QDSCs) yield an 18% improvement in photoconversion efficiency. This represents a potential and adaptability of our approach, and pathway to explore surface-engineered 2D materials to optimize the interface of solar energy conversion and other emerging optoelectronic devices.

Dispersing small Ru nanoparticles into boron nitride remodified by reduced graphene oxide for high-efficient electrocatalytic hydrogen evolution reaction

Ruthenium (Ru) electrocatalysts suffer from excessive aggregation during the hydrogen evolution reaction (HER), which hinders their practical application for hydrogen production. Hexagonal boron nitride (h-BN) is a potential carrier that could solve the above problem, but its wide band gap and low conductivity become obstacles. Herein, we provide a new, facile, low-cost, and effective strategy (killing two birds with one stone) to overcome the above issues. After modifying h-BN with reduced graphene oxide (rGO), a small amount of Ru nanoparticles (NPs) (2.2 %) are dispersed into BN with approximately uniform distribution and size control of Ru nanoparticles (∼3.85 nm). The strong synergy between Ru NPs and BN@C in the optimal Ru/BN@C (Ru wt.% = 2.22 %) electrocatalyst endows it an outstanding HER activity, with small HER overpotentials (η₁₀ = 32 mV, 35 mV) and low Tafel slopes (33.89 mV dec^-1, 37.66 mV dec^-1) in both 1 M KOH and 0.5 M H₂SO₄ media, respectively, along with good long-term stability for 50 h. Based on density functional theory (DFT) calculations, the addition of Ru to BN has been successful in creating fresh active sites for H*, with good possible adsorption/desorption ability (ΔG_H* = -0.24 eV) while preserving low water dissociation (ΔG_b = 0.46 eV) in an alkaline environment. As a result, the Ru/BN composite exhibits outstanding HER activity in both acidic and alkaline conditions. Furthermore, this study provides, for the first time, a template-free strategy to develop a good and low-cost supporter (BN) for dispersing other noble metals and the formation of highly efficient HER/OER electrocatalysts.

Design and enhanced anticorrosion performance of a Zn5Mo2O11·5H2O/h-BN nanocomposite with labyrinth of nanopores

Zinc molybdate (ZMO) is a safe and effective grafting material for anticorrosion. Herein, we reported the synthesis of ZMO/h-BN with the labyrinth of capillary pores owing to the in situ growth of ZMO on flake hexagonal boron nitride (h-BN) using the hydrothermal method. The special morphological structure provided a tortuous path for aggressive species to the steel substrate, which extended and blocked the transmission of aggressive species, enhancing the physical corrosion barrier performance. In addition, the capillary pores of ZMO contributed to the competitive adsorption of Cl^- in an electrolyte and reduced the diffusion of aggressive species, thus further delaying the corrosion process. Moreover, the capture of oxygen by forming a B-O bond with h-BN and the formation of a molybdate passive film are beneficial for the inhibition of cathodic and anodic reactions. As verified by electrochemical impedance spectroscopy (EIS), the anticorrosion performance of ZMO/h-BN coating increased by 49.58% and 130.72% compared with ZMO and epoxy resin (EP) coatings after immersing in a NaCl aqueous solution (3.50 wt%) for 72 h. This coating matrix provides an avenue for molybdate-based corrosion remediation.

Advances in Studies of Boron Nitride Nanosheets and Nanocomposites for Thermal Transport and Related Applications

Hexagonal boron nitride (h-BN) and exfoliated nanosheets (BNNs) not only resemble their carbon counterparts graphite and graphene nanosheets in structural configurations and many excellent materials characteristics, especially the ultra-high thermal conductivity, but also offer other unique properties such as being electrically insulating and extreme chemical stability and oxidation resistance even at elevated temperatures. In fact, BNNs as a special class of 2-D nanomaterials have been widely pursued for technological applications that are beyond the reach of their carbon counterparts. Highlighted in this article are significant recent advances in the development of more effective and efficient exfoliation techniques for high-quality BNNs, the understanding of their characteristic properties, and the use of BNNs in polymeric nanocomposites for thermally conductive yet electrically insulating materials and systems. Major challenges and opportunities for further advances in the relevant research field are also discussed.

Controlling the Orientation and Viscoelasticity of Materials-Binding Peptides on Hexagonal Boron Nitride Using Fatty Acids

The adsorption of materials-binding peptides to technologically relevant 2D nanosheets of h-BN could be transformative for both property modulation and materials applications. To enhance binding, integration of non-natural functionalities into the biomolecule could prove to be important. However, very little is understood regarding the impact of these biomolecular structural alterations on the binding, which could influence the affinity and surface-adsorbed structures. Here, the effect of fatty acid incorporation site and carbon chain length is investigated using the BP7 peptide, previously identified with affinity for h-BN. The peptide was modified at either the N- or C-terminus with a fatty acid chain length of 6-12 carbons long. The binding affinity and bio-overlayer viscoelasticity are quantified using quartz crystal microbalance analysis. While fatty acid conjugation did not substantially affect the affinity of the resultant biomolecules, it did alter the viscoelasticity of the biomolecular overlayer on the h-BN surface based upon the carbon chain length and incorporation site. Molecular dynamics simulations demonstrate interplay between enthalpic and entropic effects in modifying the overlayer viscoelasticity. The simulations predict that C-terminal conjugation promotes the enhancement of upright adsorbed states, compared with the N-terminal case, with this effect most pronounced for the 10-carbon chain.

Theoretical study of tunable magnetism of two-dimensional MnSe2through strain, charge, and defect

Two-dimensional transition metal dichalcogenide MnSe₂(2D-MnSe₂) with Curie temperature approximate to 300 K has a significant spintronic application on thin-film devices. We demonstrate theoretically a tunable magnetic transition of 2D-MnSe₂between anti-ferromagnetic (AFM) metal and ferromagnetic (FM) half metal as strain increasing. Mechanism of that transition involves a competition betweend-p-dthrough-bond andd-ddirect interaction in 2D-MnSe₂. Hole doping is an alternative way to enhance the stability of FM coupling. Adsorption (including Li, Na, Cl and F) and vacancy (Mn and Se) studies confirm that the controllable magnetism of 2D-MnSe₂is related to both interaction competition and charge doping. Tensile strains can greatly amplify through-bond interaction and exchange parameters, resulting in a sharp increase of Curie temperature.

Bidirectional Superionic Conduction in Surface-Engineered 2D Hexagonal Boron Nitrides

We designed functionalized hexagonal boron nitride (FhBN) nanoflakes with high proton conductivity in both in- and through-plane directions as next generation polymer electrolyte membranes (PEMs) for energy storage and conversion systems. The synthesis and functionalization of hBN nanoflakes with sulfonic acid (SA) groups are obtained by one-step and in situ liquid-phase exfoliation with excellent dispersibility and stability over a period of three months. The physico/chemical properties of FhBN nanoflakes were investigated by different spectroscopic and microscopic characterization, confirming chemical interactions between hBN lattice and SA groups. High concentrations (65 and 75 wt %) of FhBN nanoflakes composed with Nafion solution formed stable FhBN-Nafion nanocomposite PEMs, offering extra proton conduction sites, doubling ion-exchange capacity, and reducing the swelling ratio compared to those of Nafion. Our results demonstrate that both the in-plane and through-plane proton conductivities of FhBN-Nafion PEMs significantly improve under various conditions comparative to that of Nafion. The maximum values of both in- and through-plane conductivities for FhBN75%-Nafion PEM at 80% of humidity and 80 °C are 0.41 and 0.1 S·cm^-1, respectively, which are 7 and 14 times higher than those of Nafion. The bidirectional superionic transport in highly concentrated FhBN PEMs is responsible for outstanding properties, useful for electrochemical energy devices.

Hybridization with Ti3C2Tx MXene: An Effective Approach to Boost the Hydrothermal Stability and Catalytic Performance of Metal-Organic Frameworks

Metal-organic frameworks (MOFs) have attracted increasing research enthusiasm owing to their tunable functionality, diverse structure characteristics, and large surface area. However, poor hydrothermal stability restricts the utilization of some MOFs in practical applications. Our work aims at improving the hydrothermal stability of a representative MOF, namely, HKUST-1, by incorporating a two-dimensional material Ti₃C₂T_x MXene for the first time. A new type of hybrid material is synthesized through the hybridization of HKUST-1 and Ti₃C₂T_x, and the obtained hybrids show improved hydrothermal stability as well as catalytic performance. The porosity of hybrids is enhanced when incorporating an appropriate amount of Ti₃C₂T_x, and the surface area can reach 1380 m²·g^-1, while the pristine HKUST-1 is 1210 m²·g^-1. After the hydrothermal treatment (hot water vapor, 70 °C), the structure of hybrid materials maintains well, while the framework of HKUST-1 is severely destroyed. When catalyzing the ring-opening reaction of styrene oxide, the conversion reaches 76.7% only for 20 min, which is much higher than that of pure HKUST-1 (23.1% for 20 min). More importantly, the catalytic activity could recover without loss even after six cycles. Our hybrid materials are promising in practical catalytic applications due to their excellent hydrothermal stability, catalytic activity, and reusability.

Facile functionalization of boron nitride (BN) for the development of high-performance asymmetric supercapacitors

Ternary composites based on functionalized BN, a carbonaceous material, and PANI are developed for real-time asymmetric supercapacitor application.

Electrochemical exfoliation from an industrial ingot: ultrathin metallic bismuth nanosheets for excellent CO2 capture and electrocatalytic conversion

Formic acid (or formate) is a liquid fuel and chemical feedstock, and it is considered as one of the most useful value-added reductive products from electrochemical CO2 conversion. Green metallic Bi nanosheets are believed be a promising candidate for formic acid production in CO2 electroreduction. However, the complexity of their preparation with a low yield hinders their practical application on a large scale. Herein, we report that by using a cheap and commonly used industrial ingot, phase-pure two-dimensional bismuth nanosheets are fabricated on a large scale by a rapid electrochemical cathodic exfoliation method. In addition to featuring abundant active sites, the obtained Bi nanosheets possess exceptionally high adsorption capacity to CO2 compared to its bulk counterpart, resulting in remarkable enhancement in CO2 electroreduction with high selectivity toward formic acid over a wide range of negative potentials, high current density and satisfactory durability. This facile strategy opens a promising avenue for massive fabrication of metallic Bi nanosheets with excellent electrocatalytic performance for large-scale commercial utilization of CO2.

Protonation-Assisted Exfoliation of N-Containing 2D Conjugated Polymers

Ultrathin 2D conjugated polymer nanosheets are an emerging class of photocatalysts for solar-to-chemical energy conversion. Until now, the majority of ultrathin 2D polymer photocatalysts are produced through exfoliation of layered polymers. Unfortunately, it still remains a great challenge to exfoliate layered polymers into ultrathin nanosheets with high yields. In this work, a liquid-phase protonation-assisted exfoliation is demonstrated to enable remarkably improved exfoliation yields of various 2D N-containing conjugated polymers such as g-C₃ N₄ , C₂ N, and aza-CMP. The exfoliation yields are only 2-15% in pure water whereas they can be substantially improved to 41-56% in 12 m HCl. The exfoliated ultrathin nanosheets possess average thicknesses less than 5 nm and can be easily dispersed in aqueous solutions. More importantly, the exfoliated nanosheets exhibit significantly enhanced photocatalytic activity toward photocatalytic water splitting compared to their bulk counterparts. Further characterizations and computational calculations reveal that protonation of the heterocyclic nitrogen sites in the conjugated polymer frameworks can lead to strong hydrogen bonding between the polymer surfaces and water molecules, resulting in facilitated exfoliation of polymers into the liquid phase. This study unveils an important protocol toward producing ultrathin 2D N-containing conjugated polymer nanosheets for future solar energy conversion.