Micron-Sized Nanoporous Antimony with Tunable Porosity for High-Performance Potassium-Ion Batteries

Analogous Chelation to Boost Utilization of Sb in Sb Nanoparticles and N-doped Carbon Composites for Enhancing Potassium Storage

Antimony (Sb) is an attractive anode material for potassium-ion batteries (PIBs), but it suffers from aggregation during the charging-discharging process, thus causing embedded active sites and collapsed structure. The analogous chelation refers to the reaction in which the central nanoparticle is linked to the matrix through multiple coordination bonds to form a stable composite. This strategy can inhibit aggregation and maintain the nanosized structure of Sb, thus activating the utilization of Sb active sites and structural stability. Given the special position of nitrogen (N) in the periodic table of elements and the strong bond energy of Sb-N, the N element can serve as an intermediate to connect Sb nanoparticles and an intrinsic N-doped carbon network via strong Sb-N-C/Sb-N═C covalent bonds using analogous chelation. Herein, a hybrid material of Sb@CTF-NC is fabricated via analogous chelation. The Sb atoms exposed on the surface of Sb nanoparticles are used to chelate with the N-doped carbon for high-performance PIBs. The mechanism underwent ex situ characterizations. The calculation of density functional theory reveals that the increase of adsorption energy and reduction of the K+ diffusion barrier accelerate the electrochemical reaction kinetics.

Ionic Pumping Effect at the Tailored Mesoporous Carbon Interface for an Extra-Stable Lithium Ion Battery at Low Temperatures

Ion transportation at the interface significantly influences the electrochemical performance of the lithium ion battery, especially at high rates and low temperatures. Here, we develop a controlled self-assembly strategy for constructing a mesoporous carbon nanolayer with a uniform pore size and varied thicknesses on the two-dimensional monolayer MXene substrate. On the basis of the excellent electron conductivity of MXene, the mesoporous carbon layer is found with a voltage-driven ion accumulation effect, acting as an "ionic pump". The thicker mesoporous layer (∼2.28 nm) has the ability to accommodate a substantial quantity of ions, demonstrating enhanced ionic conductivity, remarkable cycling stability (192.8 mAh/g after 9400 cycles at 5.0 A/g), and outstanding rate capability at ambient and sub-zero temperatures (∼601 mAh/g at 0 °C and 0.05 A/g). This work provides valuable insights and guidance for the further development of high-performance electrode materials at high rates or low temperatures.

Binder-Free Anodes for Potassium-ion Batteries Comprising Antimony Nanoparticles on Carbon Nanotubes Obtained Using Electrophoretic Deposition

Antimony has a high theoretical capacity and suitable alloying/dealloying potentials to make it a future anode for potassium-ion batteries (PIBs); however, substantial volumetric changes, severe pulverization, and active mass delamination from the Cu foil during potassiation/depotassiation need to be overcome. Herein, we present the use of electrophoretic deposition (EPD) to fabricate binder-free electrodes consisting of Sb nanoparticles (NPs) embedded in interconnected multiwalled carbon nanotubes (MWCNTs). The anode architecture allows volume changes to be accommodated and prevents Sb delamination within the binder-free electrodes. The Sb mass ratio of the Sb/CNT nanocomposites was varied, with the optimized Sb/CNT nanocomposite delivering a high reversible capacity of 341.30 mA h g-1 (∼90% of the initial charge capacity) after 300 cycles at C/5 and 185.69 mA h g-1 after 300 cycles at 1C. Postcycling investigations reveal that the stable performance is due to the unique Sb/CNT nanocomposite structure, which can be retained over extended cycling, protecting Sb NPs from volume changes and retaining the integrity of the electrode. Our findings not only suggest a facile fabrication method for high-performance alloy-based anodes in PIBs but also encourage the development of alloying-based anodes for next-generation PIBs.

Thermal Induced Conversion of CoFe Prussian Blue Analogs Nanocubes Wrapped by Doped Carbon Network Exhibiting Fast and Stable Potassium Ion Storage as Anode

Prussian blue analogs (PBAs) show great promise as anode materials for potassium-ion batteries (PIBs) due to their high specific capacity. However, PBAs still suffer from the drawbacks of low electronic conductivity and poor structural stability, leading to inadequate rate and cyclic performance. To address these limitations, CoFe PBA nanocubes wrapped with N/S doped carbon network (CoFe PBA@NSC) as anode for PIBs is designed by using thermal-induced in situ conversion strategy. As expected, the structural advantages of nanosized PBA cubes, such as abundant interfaces and large surface area, enable the CoFe PBA@NSC electrode to demonstrate superior rate properties (557 and 131 mAh g-1 at 0.05 and 10 A g-1) and low capacity degradation (0.093% per cycle over 1000 cycles at 0.5 A g-1). Furthermore, several ex situ characterizations revealed the K-ion storage mechanism. Fe+ and Co0 are generated during potassicization, followed by a completely reversible chemical state of iron while some cobalt monomers remained during depotassication. Additionally, the as-built potassium-ion hybrid capacitor based on CoFe PBA@NSC anode exhibits a high energy density of 118 Wh kg-1. This work presents an alternative but promising synthesis route for Prussian blue analogs, which is significant for the advancement of PIBs and other related energy storage devices.

Structure/Composition/Phase Regulations of Dealloying-Derived Nanoporous Metals and Their Solar Steam Generation Performances

Structural regulation is of primary importance in structure-property/application studies of dealloyed nanoporous metals. Three aspects are mainly considered to affect the microstructure of nanoporous metals: design of precursor alloy, choosing of dealloying parameter, and annealing treatment. Herein, through the combination of the above three strategies, the regulation of structure, composition and phase in nanoporous metals are simultaneously achieved. With a dilute Cu99Ag0.75Au0.25 as the precursor, three kinds of nanoporous films are fabricated, including bi-phase nanoporous Cu-Ag-Au (B-NP-CuAgAu), hierarchically nanoporous Au (H-NPG) and single-phase homogeneously nanoporous Au (S-NPG). In situ X-ray diffraction and ex situ characterizations are utilized to reveal the structure/composition/phase evolutions during dealloying of Cu99Ag0.75Au0.25, as well as the macroscopic changes of the dealloyed samples. Notably, the ultrafine ligaments/channels of B-NP-CuAgAu and the two-level nanoporous structure of H-NPG endow them with good broadband light absorption and excellent hydrophilicity, which contribute to their outstanding solar steam generation (SSG) performances. Specially, the B-NP-CuAgAu film shows a more efficient SSG performance with water evaporation rate of 1.49 kg m-2 h-1 and photothermal efficiency of 93.6% at 1 kW m-2, and good seawater desalination ability.

Revealing Seed-Mediated Structural Evolution of Copper-Silicide Nanostructures: Generating Structured Current Collectors for Rechargeable Batteries

Metal silicide thin films and nanostructures typically employed in electronics have recently gained significant attention in battery technology, where they are used as active or inactive materials. However, unlike thin films, the science behind the evolution of silicide nanostructures, especially 1D nanowires (NWs), is a key missing aspect. Cux Siy nanostructures synthesized by solvent vapor growth technique are studied as a model system to gain insights into metal silicide formation. The temperature-dependent phase evolution of Cux Siy structures proceeds from Cu>Cu0.83 Si0.17 >Cu5 Si>Cu15 Si4 . The role of Cu diffusion kinetics on the morphological progression of Cu silicides is studied, revealing that the growth of 1D metal silicide NWs proceeds through an in situ formed, Cu seed-mediated, self-catalytic process. The different Cux Siy morphologies synthesized are utilized as structured current collectors for K-ion battery anodes. Sb deposited by thermal evaporation upon Cu15 Si4 tripod NWs and cube architectures exhibit reversible alloying capacities of 477.3 and 477.6 mAh g-1 at a C/5 rate. Furthermore, Sb deposited Cu15 Si4 tripod NWs anode tested in Li-ion and Na-ion batteries demonstrate reversible capacities of ≈518 and 495 mAh g-1 .

SAXS unveils porous anodes for potassium-ion batteries: dynamic evolution of pore structures in Fe@Fe2O3/PCNFs composite nanofibers

The porous structure of composite nanofibers plays a key role in improving their electrochemical performance. However, the dynamic evolution of pore structures and their action during ion intercalation/extraction processes for negative electrodes are not clear. Herein, porous carbon composite nanofibers (Fe@Fe2O3/PCNFs) were prepared as negative electrode materials for potassium-ion batteries. Electrochemical test findings revealed that the composites had good electrochemical characteristics, and the porous structure endowed composite electrodes with pseudo-capacitive behaviors. After 1500 discharge/charge cycles at a current density of 1000 mA g-1, the specific capacity of the potassium-ion batteries was 144.8 mAh g-1. We innovatively used synchrotron small-angle X-ray scattering (SAXS) technique to systematically investigate the kinetic process of potassium formation in composites and showed that the kinetic process of potassium reaction in composites can be divided into four stages, and the pores with smaller average diameter distribution are more sensitive to changes in the reaction process. This work paves a new way to study the deposition kinetics of potassium in porous materials, which facilitates the design of porous structures and realizes the development of alkali metal ion-anode materials with high energies.

Construction of the Fast Potassiation Path in Sbx Bi1-x @NC Anode with Ultrahigh Cycling Stability for Potassium-Ion Batteries

Due to the scarce of lithium resources, potassium-ion batteries (PIBs) have attracted extensive attention due to their similar electrochemical properties to lithium-ion batteries (LIBs) and more abundant potassium resources. Even though there is considerable progress in SbBi alloy anode for LIBs and PIBs, most studies are focused on the morphology/structure tuning, while the inherent physical features of alloy composition's effect on the electrochemical performance are rarely investigated. Herein, combined the nanonization, carbon compounding, and alloying with composition regulation, the anode of nitrogen-doped carbon-coated Sbx Bi1-x (Sbx Bi1-x @NC) with a series of tuned chemical compositions is designed as an ideal model. The density functional theory (DFT) calculation and experimental investigation results show that the K+ diffusion barrier is lower and the path is easier to carry out when element Bi dominates the potassiation reaction, which is also the reason for better circulation. The optimized Sb0.25 Bi0.75 @NC shows an excellent cycling performance with a reversible specific capacity of 301.9 mA h g-1 after 500 cycles at 0.1 A g-1 . Meanwhile, the charge-discharge mechanism is intuitively invetigated and analyzed by in situ X-ray diffraction (XRD) and transmission electron microscopy (TEM) in detail. Such an alloy-type anode synthesis approach and in situ observation method provide an adjustable strategy for the designing and investigating of PIB anodes.

Uniformly Dispersed Sb-Nanodot Constructed by In Situ Confined Polymerization of Ionic Liquids for High-Performance Potassium-Ion Batteries

Antimony (Sb) is a potential candidate anode for potassium-ion batteries (PIBs) owing to its high theoretical capacity. However; in the process of potassium alloying reaction; the huge volume expansion (about 407%) leads to pulverization of active substance as well as loss of electrical contact resulting in rapidly declining capacity. Herein; uniformly dispersed Sb-Nanodot in carbon frameworks (Sb-ND@C) were constructed by in situ confined polymerization of ionic liquids. Attributed to the uniformly dispersed Sb-ND and confinement effect of carbon frameworks; as anode for PIBs; Sb-ND@C delivered a superior rate capability (320.1 mA h g^-1 at 5 A g^-1) and an outstanding cycling stability (486 mA h g^-1 after 1000 cycles; achieving 89.8% capacity retention). This work offers a facile route to prepare highly dispersed metal-Nanodot via the in situ polymerization of ionic liquid for high-performance metal-ion batteries.

High capacity adsorption of antimony in biomass-based composite and its consequential utilization as battery anode

Antimony is more than an emerging pollutant in water but a scare resource. In this study, we report an adsorbent with the record capacity so far from the balanced view of Sb(III) and Sb(V). The composite adsorbent was fabricated by encapsulating hollow Fe₃O₄ nanosphere with the EDTA grafted chitosan, and it has superhigh adsorption capacity of for 657.1 mg/g for Sb(III) and 467.3 mg/g for Sb(V), respectively. The mechanism study reveals that the adsorption of Sb initializes from the Fe₃O₄, propagates along the chitosan with hydrogen bond, and terminates at the inner sphere complex with the EDTA moiety in the adsorbent. In view of the ultra-high adsorption capacity of the adsorbent, the recovered adsorbent that contains abundant (>36.4%) highly dispersed antimony nanoparticles (600-FCSE-Sb) is applied to Li-ion battery anode after reduction. This article provides a new idea for connecting water treatment and electric energy storage.

Revitalizing zinc-ion batteries with advanced zinc anode design

Rechargeable aqueous zinc-ion batteries (AZIBs) have attracted significant attention in large-scale energy storage systems due to their unique merits, such as intrinsic safety, low cost, and relatively high theoretical energy density. However, the dilemma of the uncontrollable Zn dendrites, severe hydrogen evolution reaction (HER), and side reactions that occur on the Zn anodes have hindered their commercialization. Herein, a state-of-the-art review of the rational design of highly reversible Zn anodes for high-performance AZIBs is provided. Firstly, the fundamental understanding of Zn deposition, with regard to the nucleation, electro-crystallization, and growth of the Zn nucleus is systematically clarified. Subsequently, a comprehensive survey of the critical factors influencing Zn plating together with the current main challenges is presented. Accordingly, the rational strategies emphasizing structural design, interface engineering, and electrolyte optimization have been summarized and analyzed in detail. Finally, future perspectives on the remaining challenges are recommended, and this review is expected to shed light on the future development of stable Zn anodes toward high-performance AZIBs.

Green and Scalable Template-Free Strategy to Fabricate Honeycomb-Like Interconnected Porous Micro-Sized Layered Sb for High-Performance Potassium Storage

The tremendous volume change and severe pulverization of micro-sized Sb anode generate no stable capacity in potassium-ion batteries (PIBs). The honeycomb-like porous structure provides free spaces to accommodate its volume expansion and offers efficient ion transport, yet complex synthesis and low yield limits its large-scale application. Here, a green, scalable template-free method for designing a 3D honeycomb-like interconnected porous micro-sized Sb (porous-Sb) is proposed. Its honeycomb-like porous formation mechanism is also verified. Under hydrothermal conditions, Sb reacts with water and dissolved oxygen in water, undergoing non-homogeneous and continuous corrosion at grain boundaries, and producing soluble H₂ Sb₂ O₆ (H₂ O), which regulates the porous structure of Sb by controlling reaction time. Benefiting from its porous structure and micron size, porous-Sb anode displays large gravimetric and volumetric capacities with 655.5 mAh g^-1 and 2,001.9 mAh cm^-3 at 0.05 A g^-1 and superior rate performance of 441.9 mAh g^-1 at 2.0 A g^-1 in PIBs. Furthermore, ex situ characterization and kinetic analysis uncover the small volume expansion and fast K⁺ reaction kinetics of porous Sb during potassiation/depotassiation, originating from its large electrolyte contact area and internal expansion mechanism. It verifies a green, scalable template-free strategy to construct honeycomb-like porous metals for energy storage and conversion.

Rechargeable Batteries for Grid Scale Energy Storage

Ever-increasing global energy consumption has driven the development of renewable energy technologies to reduce greenhouse gas emissions and air pollution. Battery energy storage systems (BESS) with high electrochemical performance are critical for enabling renewable yet intermittent sources of energy such as solar and wind. In recent years, numerous new battery technologies have been achieved and showed great potential for grid scale energy storage (GSES) applications. However, their practical applications have been greatly impeded due to the gap between the breakthroughs achieved in research laboratories and the industrial applications. In addition, various complex applications call for different battery performances. Matching of diverse batteries to various applications is required to promote practical energy storage research achievement. This review provides in-depth discussion and comprehensive consideration in the battery research field for GSES. The overall requirements of battery technologies for practical applications with key parameters are systematically analyzed by generating standards and measures for GSES. We also discuss recent progress and existing challenges for some representative battery technologies with great promise for GSES, including metal-ion batteries, lead-acid batteries, molten-salt batteries, alkaline batteries, redox-flow batteries, metal-air batteries, and hydrogen-gas batteries. Moreover, we emphasize the importance of bringing emerging battery technologies from academia to industry. Our perspectives on the future development of batteries for GSES applications are provided.

Dual-Carbon confinement strategy of antimony anode material enabling advanced potassium ion storage

Antimony (Sb) has attracted considerable attention as an anode material for potassium ion batteries (PIBs) because of its high theoretical capacity. Nevertheless, owing to the large radius of K⁺, apparent volume expansion occurs during the reaction between Sb and K⁺, which will undermine the stability of the electrode. Accordingly, a dual-carbon confinement strategy is regarded as an effective method for handling this issue. Herein, Sb is firstly captured by mesoporous carbon sphere (MCS) to form a composite of Sb/MCS, and then reduced graphene oxide (rGO) is adopted as an outer layer to wrap the Sb/MCS to obtain the dual-carbon confinement material (Sb/MCS@rGO). Given the synergistic confinement effects of the MCS and rGO, the Sb/MCS@rGO electrode realizes an excellent rate capacity of 341.9 mAh g^-1 at 1000 mA g^-1 and prominent cycling stability with around 100% retention at 50 mA g^-1 after 100 cycles. Besides, the discussion on galvanostatic charge-discharge test, cyclic voltammetry and ex-situ XRD illustrates the stepwise potassium storage mechanism of Sb. Benefiting from the dual-carbon confinement effects, the Sb/MCS@rGO electrode processes promising electrochemical reaction kinetics. Furthermore, the application of the Sb/MCS@rGO in full cells also demonstrates its superior rate capacity (212.3 mAh g^-1 at 1000 mA g^-1).

Multidimensional antimony nanomaterials tailored by electrochemical engineering for advanced sodium-ion and potassium-ion batteries

Downsizing the dimensions of materials holds great importance for promoting the alkali-ion storage properties, which is considered to be one of the most efficient methods for improving the cycling stability and rate capability of alloy anodes. Nevertheless, efficient, affordable, and scalable methods to prepare low-dimensional electrode materials are lacking. In this study, we developed a tunable electrochemical strategy for synthesizing multidimensional antimony (Sb) nanomaterials. Depending on different reaction mechanisms in different electrolytes, we fabricated zero-dimensional Sb nanoparticles, two-dimensional (2D) antimonene nanosheets, and a three-dimensional porous Sb network through the electrochemical delamination of bulk Sb in lithium hexafluorophosphate in propylene carbonate, tetraethylammonium hydroxide aqueous solution, and tetraethylammonium hexafluorophosphate in N, N-dimethylformamide, respectively. In the preferred electrolyte, 2D antimonene nanosheets deliver a large sodium storage capacity of 572.5 mAh g^-1 after 200 cycles at 0.2 A g^-1 and an excellent rate capability of 553.6 mAh g^-1 at 5 A g^-1. When used as anode materials for potassium-ion batteries, we obtained a high capacity of 550.3 mAh g^-1 after 300 cycles, and observed a high rate capability of 302.3 mAh g^-1 at 4 A g^-1. These results provide an easy and tunable strategy for designing high-performance low-dimensional materials for next-generation batteries.

Sn-, Sb- and Bi-Based Anodes for Potassium Ion Battery

Owing to the abundant resources of potassium resources, potassium ion batteries (PIBs) hold great potential in various energy storage devices. However, the poor lifespan of PIBs anodes limit their merchant applications. The exploitation of anode materials with high performance is one of the critical factors to the development of PIBs. Metallic Sn-, Sb-, and Bi-based materials, show promising future thanks to their high theoretical capacities and safe working voltage. However, the rapid capacity decay caused by the large K⁺ is still a pivotal challenge. In this review, recent progresses on alloying anodes were summarized. Schemes, such as ultra-small nanoparticles, hetero-element doping, and electrolyte optimization are effective strategies to improve their electrochemical properties. This review provides an outlook on the nanostructures and their synthesis methods for the alloying-type materials, and will stimulate their intensive study for practical application in the near future.

Chemically Binding Vanadium Sulfide in Carbon Carriers to Boost Reaction Kinetics for Potassium Storage

Potassium-ion batteries (PIBs) have received widespread interest on account of low redox potential, low price, and high abundance of potassium. However, attributing to the large radius of K⁺ ions, the structure of electrode material is easily damaged during the potassiation/depotassiation process. Herein, the unique chemical bonding of encapsulating V_5.45S₈ nanoparticles in N,S codoped multichannel carbon nanofibers (CB-VS@NSCNFs) is designed through electrospinning and in situ vulcanization techniques. The anchoring effect (V-C chemical bonding) of the V_5.45S₈ nanoparticles with carbon carriers assists in shortening the K⁺/e^- transport path and alleviating the structural changes, which is highlighted to acquire a stable cycle lifespan. Also, codoped multichannel carbon nanofibers provide abundant active sites for pseudocapacitive behavior to achieve fast kinetics. As a synergistic result, when CB-VS@NSCNFs are evaluated as anode material for PIBs, they exhibit a high reversible capacity of 411 mA h g^-1 at 0.1 A g^-1, decent rate property with a capacity of up to 123 mA h g^-1 at 6 A g^-1, and good cycling stability of 500 cycles at 1 A g^-1.

Large-scale synthesis of few-layered copper antimony sulfide nanosheets as electrode materials for high-rate potassium-ion storage

Metal chalcogenides (MCs) have received widespread attentions in potassium ion storage, due to their high theoretical specific capacity and low cost. However, practical applications are still a challenge because of the slow diffusion rate and large ionic radius, leading to dramatic volume expansion and slow rate performance. Herein, we introduce a simple and large scale solvothermal method to synthesize high-quality two-dimensional (2D) layered CuSbS₂ nanosheets with a thickness of about 5 nm. The thin 2D layered structure has a weak van der Waals gap and a large exposed surface area to contact the electrolyte and promotes rapid K⁺ diffusion kinetics. In addition, the in-situ copper exsolution during potassiation process enhances the rate capability of K⁺ storage. CuSbS₂ half cells exhibited excellent rate performance, delivering specific capacities of 573, 505, 476, 230, 177 mAh g^-1 at current densities of 0.1, 0.5, 1, 5, 10 A g^-1, respectively. The unique K⁺ electrochemical storage mechanism and resistance change during reaction process was revealed in detail by operando XRD, XPS and TEM. Finally, potassium ion hybrid capacitors (PIHCs) with CuSbS₂ nanosheets as anode and AC as cathode demonstrated excellent performances with the maximum energy density of 127 W h kg^-1 and the power density of 2415 W kg^-1, providing an example of rationally design a high rate battery-type PIHC anode.

MXene-Based Aerogel Anchored with Antimony Single Atoms and Quantum Dots for High-Performance Potassium-Ion Batteries

Rationally electronic structure engineering of nanocomposite electrodes shows great promise for enhancing the electrochemical performance of rechargeable batteries. Herein, we report antimony single atoms and quantum dots (∼5 nm) codecorated Ti₃C₂T_x MXene-based aerogels (Sb SQ@MA) for high-performance potassium-ion batteries (PIBs). We found that the atomically dispersed Sb could modify the electronic structure of the Sb/Ti₃C₂T_x composite, improve the charge transfer kinetics, and enhance the potassium storage capability at the heterointerfaces. Additionally, the MXene-based aerogel with rich surface functional groups and defects provides abundant anchoring sites and endows the composite reinforced structural stability and highly efficient electron transfer. The high loading of Sb (∼60.3 wt %) with short ionic transport pathways is desired potassium reservoirs. These features synergistically enhance the rate and cycling performance of the Sb SQ@MA electrodes in PIBs. This work has demonstrated an enlightening technique to tailor the interface activity of heterostructured electrodes for electrochemical applications.

Crystal Facet and Architecture Engineering of Metal Oxide Nanonetwork Anodes for High-Performance Potassium Ion Batteries and Hybrid Capacitors

Metal oxides are considered as prospective dual-functional anode candidates for potassium ion batteries (PIBs) and hybrid capacitors (PIHCs) because of their abundance and high theoretic gravimetric capacity; however, due to the inherent insulating property of wide band gaps and deficient ion-transport kinetics, metal oxide anodes exhibit poor K⁺ electrochemical performance. In this work, we report crystal facet and architecture engineering of metal oxides to achieve significantly enhanced K⁺ storage performance. A bismuth antimonate (BiSbO₄) nanonetwork with an architecture of perpendicularly crossed single crystal nanorods of majorly exposed (001) planes are synthesized via CTAB-mediated growth. (001) is found to be the preferential surface diffusion path for superior adsorption and K⁺ transport, and in addition, the interconnected nanorods gives rise to a robust matrix to enhance electrical conductivity and ion transport, as well as buffering dramatic volume change during insertion/extraction of K⁺. Thanks to the synergistic effect of facet and structural engineering of BiSbO₄ electrodes, a stable dual conversion-alloying mechanism based on reversible six-electron transfer per formula unit of ternary metal oxides is realized, proceeding by reversible coexistence of potassium peroxide conversion reactions (KO₂↔K₂O) and Bi_xSb_y alloying reactions (BiSb ↔ KBiSb ↔ K₃BiSb). As a result, BiSbO₄ nanonetwork anodes show outstanding potassium ion storage in terms of capacity, cycling life, and rate capability. Finally, the implementation of a BiSbO₄ nanonetwork anode in the state-of-the-art full cell configuration of both PIBs and PIHCs shows satisfactory performance in a Ragone plot that sheds light on their practical applications for a wide range of K⁺-based energy storage devices. We believe this study will propose a promising avenue to design advanced hierarchical nanostructures of ternary or binary conversion-type materials for PIBs, PIHCs, or even for extensive energy storage.

Iron vacancies engineering of FexC@NC hybrids toward enhanced lithium-ion storage properties

Defect engineering have profound influence on the energy storage properties of electrode hybrids by adjusting their intrinsic electronic characteristics. For iron carbide based materials, however, the effect of defect (especially cation vacancies) toward their electrochemical performance are still unclear. Herein, the feasible and scalable synthesis of Fe_xC@NC with 3D honeycomb-like carbon architecture and abundant Fe vacancies via template etching is reported. Such structure enable outstanding lithium-ion storage properties owing to hierarchical pores, improved intrinsic electrochemical activity, as well as the introduction of more active sites. As a result, the Fe_xC@NC-2 presents a high reversible specific capacity of 1079 mAh g^-1after 1000 cycles. Moreover, an excellent cycling stability can be achieved via maintaining a high-capacity retention (689 mAh g^-1, 98.4%) over 1000 cycles at 5 A g^-1. This study provides a feasible strategy for developing high-performance hybrids with hierarchical pore and rich defects structures.

Recent Advances and Perspectives of Battery-Type Anode Materials for Potassium Ion Storage

Potassium ion energy storage devices are competitive candidates for grid-scale energy storage applications owing to the abundancy and cost-effectiveness of potassium (K) resources, the low standard redox potential of K/K⁺, and the high ionic conductivity in K-salt-containing electrolytes. However, the sluggish reaction dynamics and poor structural instability of battery-type anodes caused by the insertion/extraction of large K⁺ ions inhibit the full potential of K ion energy storage systems. Extensive efforts have been devoted to the exploration of promising anode materials. This Review begins with a brief introduction of the operation principles and performance indicators of typical K ion energy storage systems and significant advances in different types of battery-type anode materials, including intercalation-, mixed surface-capacitive-/intercalation-, conversion-, alloy-, mixed conversion-/alloy-, and organic-type materials. Subsequently, host-guest relationships are discussed in correlation with the electrochemical properties, underlying mechanisms, and critical issues faced by each type of anode material concerning their implementation in K ion energy storage systems. Several promising optimization strategies to improve the K⁺ storage performance are highlighted. Finally, perspectives on future trends are provided, which are aimed at accelerating the development of K ion energy storage systems.

Prospects of Electrode Materials and Electrolytes for Practical Potassium-Based Batteries

Potassium-ion batteries (PIBs) have attracted tremendous attention because of their high energy density and low-cost. As such, much effort has focused on developing electrode materials and electrolytes for PIBs at the material levels. This review begins with an overview of the high-performance electrode materials and electrolytes, and then evaluates their prospects and challenges for practical PIBs to penetrate the market. The current status of PIBs for safe operation, energy density, power density, cyclability, and sustainability is discussed and future studies for electrode materials, electrolytes, and electrode-electrolyte interfaces are identified. It is anticipated that this review will motivate research and development to fill existing gaps for practical potassium-based full batteries so that they may be commercialized in the near future.

Carbon Hollow Tube-Confined Sb/Sb2S3 Nanorod Fragments as Highly Stable Anodes for Potassium-Ion Batteries

Potassium-ion batteries (PIBs) have attracted widespread attention in recent years due to their potential advantages such as low cost and high energy density. However, the large radius of K⁺ and the low potassium storage capacity of some electrode materials limit their development. Antimony (Sb)-based materials are considered to be promising anode materials for PIBs in view of their high K storage capacity and low potassiation potential. Nonetheless, the huge volume variation caused by potassiation/depotassiation often leads to their failure. Previous works have proved that carbon coating and nanostructure design are important means to alleviate the volume effect. Herein, the carbon-coating technology and nanostructure design were combined to prepare a Sb-based nanomaterial with Sb/Sb₂S₃ hybrid nanorod fragments confined in a carbon hollow tube (Sb/Sb₂S₃@CHT). Such a nanostructure is beneficial to alleviate the volume change of the Sb/Sb₂S₃ hybrids while facilitating the kinetics of the electrochemical reaction. As a consequence, the Sb/Sb₂S₃@CHT anode electrode exhibits high rate performance and outstanding cycle stability characterized by retaining a high specific capacity of 400.9 mA h g^-1 after cycling for 200 cycles at 200 mA g^-1.

Tremella-like Hydrated Vanadium Oxide Cathode with an Architectural Design Strategy toward Ultralong Lifespan Aqueous Zinc-Ion Batteries

Rechargeable aqueous zinc-ion batteries (ZIBs) are promising systems for energy storage due to their operational safety, low cost, and environmental friendliness. However, the development of suitable cathode materials is plagued by the sluggish dynamics of Zn²⁺ with strong electrostatic interaction. Herein, an Al³⁺-doped tremella-like layered Al_0.15V₂O₅·1.01H₂O (A-VOH) cathode material with a large pore diameter and high specific surface area is demonstrated to greatly boost electrochemical performance as ZIB cathodes. Resultant ZIBs with a 3 M Zn(CF₃SO₃)₂ electrolyte deliver a high specific discharge capacity of 510.5 mAh g^-1 (0.05 A g^-1), and an excellent energy storage performance is well maintained with a specific capacity of 144 mAh g^-1 (10 A g^-1) even after ultralong 10,000 cycles. The decent electrochemical performance roots in the novel tremella-like structure and the interlayer of Al³⁺ ions and water molecules, which could improve the electrochemical reaction kinetics and structural long cycle stability. Furthermore, the assembled coin-type cells could power a light-emitting diode (LED) lamp for 2 days. We believed that the design philosophy of unique morphology with abundant active sites for Zn²⁺ storage will boost the development of competitive cathodes for high-performance aqueous batteries.

Extra Sodiation Sites in Hard Carbon for High Performance Sodium Ion Batteries

Hard carbons are promising anodes for sodium-ion batteries (SIBs). However, the low practical capacity from limited sodiation sites impedes their applications. Herein, ultrahigh concentration of pyridine N (≈7.9%) is introduced inside hard carbon, considering that pyridine N may provide extra sodium storage sites with stable CN• and CC• radicals during cycling. To expose more radical sites for sodium storage, a 3D structure with a multistage pore structure is constructed through NH₃ release during the pyrolyzation process. As expected, the hard carbon with extra sodiation sites exhibits an impressively high capacity of 434 mA h g^-1 at 20 mA g^-1 , superior rate performance of 238 mA h g^-1 at a current density of 5 A g^-1 and a high-capacity retention of 98.7% after 5000 cycles. The radicals induced Na-adsorption mechanism was further explored through ex situ electron paramagnetic resonance technology, in situ Raman technology and density functional theory calculations. The results reveal that the extra sodiation sites come from the electrostatic interaction at low potentials. This work constructs a sodium ions storage model of extra radicals and provides an extended strategy to improve the electrochemical performance of SIBs anode materials.

Scalable and Controllable Synthesis of Interface-Engineered Nanoporous Host for Dendrite-Free and High Rate Zinc Metal Batteries

Rechargeable zinc (Zn)-ion batteries are regarded as highly prospective candidates for next-generation renewable and safe energy storage systems. However, the uncontrolled dendrite growth of the Zn anode impedes their practical application. Here, a scalable and controllable approach is developed for converting commercial titanium (Ti) foil to 3D porous Ti, which retains good resistance to corrosion, high electrical conductivity, and excellent mechanical properties. Benefiting from a spontaneous ultrathin zincophilic titanium dioxide (TiO₂) interfacial layer and continuous 3D structure, the 3D porous Ti can act as an effective host to achieve a 3D Ti/Zn metal anode. By ensuring homogeneous nucleation, uniform current distribution, and volume change accommodation, the dendritic growth of 3D Ti/Zn metal anode is effectively inhibited with stable Zn plating/stripping up to 2000 h with low polarization. When conjugated with a 3D sulfur-doped Ti₃C₂T_x MXene@MnO₂ nanotube cathode, a high rate and stable Zn cell is achieved with 95.46% capacity retention after 500 cycles at a high rate of 5 A g^-1. This work may also be interesting for researches in porous metals and other battery systems.

Boosting carbon monoxide production during CO2 reduction reaction via Cu-Sb2O3 interface cooperation

Development of multiple-component catalyst materials is a new trend in electrochemical CO₂ reduction reaction (eCO₂RR). A new type of metal-oxide interaction is reported here to improve carbon monoxide production via synergistic effect between the CO₂-to hydrocarbon selective metal material and CO₂-to hydrogen generation oxide material. Cu/Sb₂O₃ material originates from the hetero-structured CuO/Sb₂O₃ by a facile two-step hydrolysis and precipitation method, cooperative to inhibit hydrogen evolution or methane product, achieving CO Faradaic efficiency to 92% in CO₂ saturated KCl electrolyte at -0.99 V with good stability. The formation of a stable *COOH intermediate by electronic and geometric effects via Cu and Sb₂O₃ are responsible to promote CO selectivity. Cu-Sb₂O₃ interface interaction also destabilizes the adsorption *H as well, an intermediate for H₂ evolution. This study proposes a versatile design strategy for construction and utilization of metal-oxide interface for eCO₂RR.

Alloyed BiSb Nanoparticles Confined in Tremella-Like Carbon Microspheres for Ultralong-Life Potassium Ion Batteries

Bismuth-antimony alloy is considered as a promising potassium ion battery anode because of its combination of the high theoretical capacity of antimony and the excellent rate capacity of bismuth. However, the large volume change and sluggish reaction kinetic upon cycling have triggered severe capacity fading and poor rate performance. Herein, a nanoconfined BiSb in tremella-like carbon microspheres (BiSb@TCS) are delicately designed to address these issues. As-prepared BiSb@TCS renders an outstanding potassium-storage performance with a reversible capacity of 181 mAh g^-1 after ultralong 5700 cycles at a current density of 2 A g^-1 , and an excellent rate capacity of 119.3 mAh g^-1 at 6 A g^-1 . Such a superior performance can be ascribed to the delicate microstructure. The self-assembled carbon microspheres can strengthen integral structure and effectively accommodate the volume expansion of BiSb nanoparticles, and 2D carbon nanowalls in carbon microspheres can provide fast ion/electron diffusion dynamic. Theoretical calculation also suggests a thermodynamic feasibility of alloyed BiSb nanoparticles for storing potassium ion. Such a work shows that BiSb@TCS possesses a great potential to be a high-performance anode of potassium ion batteries. The rational designing of multiscaled structure would be instructive to the exploitation of other energy-storage materials.

A General Self-Sacrifice Template Strategy to 3D Heteroatom-Doped Macroporous Carbon for High-Performance Potassium-Ion Hybrid Capacitors

Potassium-ion hybrid capacitors (PIHCs) tactfully combining capacitor-type cathode with battery-type anode have recently attracted increasing attentions due to their advantages of decent energy density, high power density, and low cost; the mismatches of capacity and kinetics between capacitor-type cathode and battery-type anode in PIHCs yet hinder their overall performance output. Herein, based on prediction of density functional theory calculations, we find Se/N co-doped porous carbon is a promising candidate for K⁺ storage and thus develop a simple and universal self-sacrifice template method to fabricate Se and N co-doped three-dimensional (3D) macroporous carbon (Se/N-3DMpC), which features favorable properties of connective hierarchical pores, expanded interlayer structure, and rich activity site for boosting pseudocapacitive activity and kinetics toward K⁺ storage anode and enhancing capacitance performance for the reversible anion adsorption/desorption cathode. As expected, the as-assembled PIHCs full cell with a working voltage as high as 4.0 V delivers a high energy density of 186 Wh kg^-1 and a power output of 8100 W kg^-1 as well as excellent long service life. The proof-of-concept PIHCs with excellent performance open a new avenue for the development and application of high-performance hybrid capacitors.

Ultrafine ZnS Nanoparticles in the Nitrogen-Doped Carbon Matrix for Long-Life and High-Stable Potassium-Ion Batteries

Potassium-ion batteries (KIBs) have attracted researchers' widespread attention because of the luxuriant reserves of potassium salts and their low cost. Nevertheless, the absence of suitable electrode materials with a stable electrochemical property is a crucial issue, which seriously hampers the practical applications of KIBs. Herein, a scalable anode material consisting of ultrafine ZnS nanoparticles encapsulated in three-dimensional (3D) carbon nanosheets is explored for KIBs. This hierarchical anode is obtained via a simple and universal sol-gel method combined with a typical solid-phase sulfidation route. The special structure of this anode facilitates good contact with electrolytes and has enough voids to buffer the large volumetric stress changing during K⁺ insertion/extraction. Thus, the 3D ZnS@C electrode exhibitsour stable cycling performance (230 mAh g^-1 over 2300 cycles at 1.0 A g^-1) and superior rate capability. The kinetic analysis indicates that a ZnS@C anode with considerable pesoudecapactive contribution benefits a fast potassium/depotassium process. Detailed ex-situ and in-situ measurements reveal that this ZnS@C anode combines reversible conversion and alloying-type reactions. This rationally designed ZnS@C material is highly applicable for KIBs, and the current route opens an avenue for the development of highly stable K⁺ storage materials.

Recent Progress on the Alloy-Based Anode for Sodium-Ion Batteries and Potassium-Ion Batteries

High-energy batteries with low cost are urgently needed in the field of large-scale energy storage, such as grid systems and renewable energy sources. Sodium-ion batteries (SIBs) and potassium-ion batteries (PIBs) with alloy-based anodes provide huge potential due to their earth abundance, high capacity, and suitable working potential, and are recognized as attractive alternatives for next-generation batteries system. Although some important breakthroughs have been reported, more significant improvements are still required for long lifetime and high energy density. Herein, the latest progress for alloy-based anodes for SIBs and PIBs is summarized, mainly including Sn, Sb, Ge, Bi, Si, P, and their oxides, sulfides, selenides, and phosphides. Specifically, the material designs for the desired Na⁺ /K⁺ storage performance, phase transform, ionic/electronic transport kinetics, and specific chemical interactions are discussed. Typical structural features and research strategies of alloy-based anodes, which are used to facilitate processes in battery development for SIBs and PIBs, are also summarized. The perspective of future research of SIBs and PIBs is outlined.

Blowing Iron Chalcogenides into Two-Dimensional Flaky Hybrids with Superior Cyclability and Rate Capability for Potassium-Ion Batteries

Chalcogenide-based anodes are receiving increasing attention for rechargeable potassium-ion batteries (PIBs) due to their high theoretical capacities. However, they usually exhibit poor electrochemical performance due to poor structural stability, low conductivity, and severe electrolyte decomposition on the reactive surface. Herein, a method analogous to "blowing bubbles with gum" is used to confine FeS₂ and FeSe₂ in N-doped carbon for PIB anodes with ultrahigh cyclic stability and enhanced rate capability (over 5000 cycles at 2 A g^-1). Several theoretical and experimental methods are employed to understand the electrodes' performance. The density functional theory calculations showed high affinity for potassium adsorption on the FeS₂ and FeSe₂. The in situ XRD and ex situ TEM analysis confirmed the formation of several intermediate phases of the general formula K_xFeS₂. These phases have high conductivity and large interlayer distance, which promote reversible potassium insertion and facilitate the charge transfer. Also, the calculated potassium diffusion coefficient during charge/discharge further proves the enhanced kinetics. Furthermore, The FeS₂@NC anode in a full cell also exhibits high cyclic stability (88% capacity retention after 120 cycles with 99.9% Coulombic efficiency). Therefore, this work provides not only an approach to overcome several challenges in PIB anodes but also a comprehensive understanding of the mechanism and kinetics of the potassium interaction with chalcogenides.

Sb nanosheet modified separator for Li-S batteries with excellent electrochemical performance

An air-stable antimony (Sb) nanosheet modified separator (SbNs/separator) has been prepared by coating exfoliated Sb nanosheets (SbNs) successfully onto a pristine separator through a vacuum infiltration method. The as-prepared Li-S batteries using SbNs/separators exhibit much improved electrochemical performance compared to the ones using commercial separators. The coulombic efficiency (CE) of the Li-S battery using the SbNs/separator after the initial cycle is close to 100% at a current density of 0.1 A g-1, and 660 mA h g-1 capacity retained after 100 cycles. The rate capability of Li-S battery using SbNs/separator delivers a reversible capacity of 425 mA h g-1 when the current density increases to 1 A g-1. The improved electrochemical performance is mainly attributed to the following reasons. Firstly, the combination of physical adsorption and chemical bonding between SbNs and lithium polysulfides (LiPSs), which efficiently inhibits the shuttle phenomena of LiPSs. Secondly, the good electronic conductivity of SbNs improves the utilization of the adsorbed LiPSs, which benefits the capacity release of active materials. Lastly, the fast conversion kinetics of intermediate LiPSs caused by the catalytic effect from SbNs further suppresses the shuttle effect of LiPSs. The SbNs/separators exhibit a great potential for the future high-performance Li-S batteries.

Electrolyte-Mediated Stabilization of High-Capacity Micro-Sized Antimony Anodes for Potassium-Ion Batteries

Alloying anodes exhibit very high capacity when used in potassium-ion batteries, but their severe capacity fading hinders their practical applications. The failure mechanism has traditionally been attributed to the large volumetric change and/or their fragile solid electrolyte interphase. Herein, it is reported that an antimony (Sb) alloying anode, even in bulk form, can be stabilized readily by electrolyte engineering. The Sb anode delivers an extremely high capacity of 628 and 305 mAh g^-1 at current densities of 100 and 3000 mA g^-1 , respectively, and remains stable for more than 200 cycles. Interestingly, there is no need to do nanostructural engineering and/or carbon modification to achieve this excellent performance. It is shown that the change in K⁺ solvation structure, which is tuned by electrolyte composition (i.e., anion, solvent, and concentration), is the main reason for achieving this excellent performance. Moreover, an interfacial model based on the K⁺ -solvent-anion complex behavior is presented. The electronegativity of the K⁺ -solvent-anion complex, which can be tuned by changing the solvent type and anion species, is used to predict and control electrode stability. The results shed new light on the failure mechanism of alloying anodes, and provide a new guideline for electrolyte design that stabilizes metal-ion batteries using alloying anodes.

Sulfur-Rich Graphene Nanoboxes with Ultra-High Potassiation Capacity at Fast Charge: Storage Mechanisms and Device Performance

It is a major challenge to achieve fast charging and high reversible capacity in potassium ion storing carbons. Here, we synthesized sulfur-rich graphene nanoboxes (SGNs) by one-step chemical vapor deposition to deliver exceptional rate and cyclability performance as potassium ion battery and potassium ion capacitor (PIC) anodes. The SGN electrode exhibits a record reversible capacity of 516 mAh g^-1 at 0.05 A g^-1, record fast charge capacity of 223 mA h g^-1 at 1 A g^-1, and exceptional stability with 89% capacity retention after 1000 cycles. Additionally, the SGN-based PIC displays highly favorable Ragone chart characteristics: 112 Wh kg^-1at 505 W kg^-1 and 28 Wh kg^-1 at 14618 W kg^-1 with 92% capacity retention after 6000 cycles. X-ray photoelectron spectroscopy analysis illustrates a charge storage sequence based primarily on reversible ion binding at the structural-chemical defects in the carbon and the reversible formation of K-S-C and K₂S compounds. Transmission electron microscopy analysis demonstrates reversible dilation of graphene due to ion intercalation, which is a secondary source of capacity at low voltage. This intercalation mechanism is shown to be stable even at cycle 1000. Galvanostatic intermittent titration technique analysis yields diffusion coefficients from 10^-10 to 10^-12 cm² s^-1, an order of magnitude higher than S-free carbons. The direct electroanalytic/analytic comparison indicates that chemically bound sulfur increases the number of reversible ion bonding sites, promotes reaction-controlled over diffusion-controlled kinetics, and stabilizes the solid electrolyte interphase. It is also demonstrated that the initial Coulombic efficiency can be significantly improved by switching from a standard carbonate-based electrolyte to an ether-based one.

CoSe@N-Doped Carbon Nanotubes as a Potassium-Ion Battery Anode with High Initial Coulombic Efficiency and Superior Capacity Retention

Potassium-ion batteries (KIBs) have gained significant interest in recent years from the battery research community because potassium is an earth-abundant and redox-active metal, thus having the potential to replace lithium-ion batteries for sustainable energy storage. However, the current development of KIBs is critically challenged by the lack of competitive electrode materials that can reversibly store large amounts of K⁺ and electrolyte systems that are compatible with the electrode materials. Here, we report that cobalt monochalcogenide (CoSe) nanoparticles confined in N-doped carbon nanotubes (CoSe@NCNTs) can be used as a K⁺-storing electrode. The CoSe@NCNT composite exhibits a high initial Columbic efficiency (95%), decent capacity (435 mAh g^-1 at 0.1 A g^-1), and stability (282 mAh g^-1 2.0 A g^-1 after 500 cycles) in a 1 M KPF₆-DME electrolyte with K as the anode over the voltage range from 0.01 to 3.0 V. A full KIB cell consisting of this anode and a Prussian blue cathode also shows excellent electrochemical performance (228 mAh g^-1 at 0.5 A g^-1 after 200 cycles). We show that the NCNT shell is effective not only in providing high electronic conductivity for fast charge transfer but also in accommodating the volume changes during cycling. We also provide experimental and theoretical evidence that KPF₆ in the electrolyte plays a catalytic role in promoting the formation of a polymer-like film on the CoSe surface during the initial activation process, and this amorphous film is of critical importance in preventing the dissolution of polyselenide intermediates into the electrolyte, stabilizing the Co⁰/K₂Se interface, and realizing the reversibility of Co⁰/K₂Se conversion.

Developing better ester- and ether-based electrolytes for potassium-ion batteries

Potassium-ion batteries (PIBs) have attracted extensive attention for next-generation energy storage systems because of the high abundance of potassium resources and low cost. However, the electrochemical performance of PIBs still cannot satisfy the requirements of practical application. One of the most effective strategies to improve the electrochemical performance of PIBs is electrolyte optimization. In this review, we focus on recent advances in ester- and ether-based electrolytes for high-performance PIBs. First, we discuss the requirements and components of organic electrolytes (potassium salts and solvents) for PIBs. Then, the strategies toward optimizing the electrolytes have been summarized, including potassium salt optimization, solvent optimization, electrolyte concentration optimization, and introducing electrolyte additives. In general, the electrolyte optimization methods can adjust the solvation energy, the lowest unoccupied molecular orbital energy level, and the highest occupied molecular orbital energy level, which are beneficial for achieving fast kinetics, stable and highly K⁺-conductive solid-electrolyte interphase layer, and superior oxidation resistance, respectively. Future studies should focus on exploring the effects of composition on electrolyte characteristics and the corresponding laws. This review provides some significant guidance to develop better electrolytes for high-performance PIBs.

A comprehensive summary on how to optimize ester- and ether-based electrolytes for high-performance potassium-ion batteries.

Flexible Sb-graphene-carbon nanofibers as binder-free anodes for potassium-ion batteries with enhanced properties

Potassium-ion batteries (KIBs) are emerging as attractive alternatives to lithium-ion batteries for the large scale energy storage and conversion systems, in view of the natural abundance and low cost of potassium resources. However, the lack of applicable anodes for reversible accommodation to the large K⁺ limits the application of KIBs. Herein, porous Sb-graphene-carbon (Sb-G-C) nanofibers are fabricated via a scalable and facile electrospinning approach. As an attempt, the nanofibers weaving into flexible mats are introduced as binder-free anode materials of KIBs, presenting a great cycle life (204.95 mAh g^-1 after 100 cycles at 100 mA g^-1), as well as the excellent rate capability (120.83 mAh g^-1 at 1 A g^-1). The superior performances of the Sb-G-C anodes can be derived from the dispersed graphene, which offers enhanced tolerance to the volume change and promotes the electron transportation, accounting for the outstanding cyclability and rate capability. Furthermore, the extrinsic pseudocapacitance created from the 1D porous nanostructure of the Sb-G-C also boosts the K⁺ storage capacity. The presented results may pave a new pathway for future high-performance KIBs.

Armoring Black Phosphorus Anode with Stable Metal-Organic-Framework Layer for Hybrid K-Ion Capacitors

Potassium-ion capacitors (KICs) are promising for sustainable and eco-friendly energy storage technologies, yet their slow reaction kinetics and poor cyclability induced by large K-ion size are a major obstacle toward practical applications. Herein, by employing black phosphorus nanosheets (BPNSs) as a typical high-capacity anode material, we report that BPNS anodes armored with an ultrathin oriented-grown metal-organic-framework (MOF) interphase layer (BPNS@MOF) exhibit regulated potassium storage behavior for high-performance KICs. The MOF interphase layers as protective layer with ordered pores and high chemical/mechanical stability facilitate K ion diffusion and accommodate the volume change of electrode, beneficial for improved reaction kinetics and enhanced cyclability, as evidenced by substantial characterizations, kinetics analysis and DFT calculations. Consequently, the BPNS@MOF electrode as KIC anodes exhibits outstanding cycle performance outperforming most of the reported state-of-art KICs so far.

A cage compound precursor-derived Sb/Sb2O4/Fe3C nanocomposite anchored on reduced graphene oxide as an anode for potassium ion batteries

A cage compound precursor-derived Sb/Sb₂O₄/Fe₃C nanocomposite anchored on reduced graphene oxide is fabricated and used as an anode for PIBs and delivers an outstanding electrochemistry performance.

Boosting potassium-storage performance via the functional design of a heterostructured Bi2S3@RGO composite

Potassium-ion batteries (PIBs) are considered a promising alternative to lithium-ion batteries (LIBs) for next-generation energy storage due to the abundance and competitive cost of potassium resources. However, the excavation and the development of proper electrodes for PIBs are still confronted with great challenges. Herein, a self-assembled bismuth sulfide microsphere wrapped with reduced graphene oxide was fabricated to form a heterostructured Bi2S3@RGO composite via a visible-light-assisted method and served as the anode for PIBs. The as-prepared Bi2S3@RGO composite presented a high reversible specific capacity of 538 mA h g-1 at 0.2 A g-1 and superior rate capability of 237 mA h g-1 at a high current density of 2 A g-1 after 300 cycles. In particular, the high capacity could be ascribed to the synergistic effect of the conversion and alloying reactions during the electrochemical processes, which was validated by ex situ X-ray diffraction. The fabrication of a unique heterostructure combining the self-assembled Bi2S3 microspheres and flexible RGO boosted the facile charge transfer, leading to the enhanced cyclic stability and rate performance.