Spectral-Selective Plasmonic Polymer Nanocomposites Across the Visible and Near-Infrared

Fabrication of one-dimensional nanostructures standing vertically on a substrate through layer-by-layer deposition

Layer-by-layer deposition has been widely used to prepare heterogeneous nanocomposites with controllable properties, where the controllability of nanocomposite properties can be further enhanced by combining the self-assembly of hard materials, such as nanocrystals, and soft materials, such as polymer matrices. However, the self-assembled structure of nanocrystals in a polymer matrix is limited by thermodynamics. Herein, we introduced the strong interaction between nanocrystals and a substrate to generate a thermodynamically unfavorable one-dimensional nanostructure standing vertically on the substrate. Two different shapes-"wire-like" and "steeple-like" or "antenna-like"-of one-dimensional nanostructures standing vertically on the substrate can be obtained using cube-like nanocrystals as building blocks and carefully controlling their size in each deposited layer. This low-cost and massively parallel scale synthesis method to generate one-dimensional nanostructures standing vertically on a substrate can be used to replace the expensive and time-consuming "lithography" synthesis method. This synthesis method also provides a simple way to design and fabricate one-dimensional nanostructures with desired properties standing vertically on a substrate by controlling nanocrystal properties in each deposited layer.

Color Generation and Polarization-Sensitive Encryption by Laser Writing on Plasmonic Reflector Arrays

Plasmonic color printing presents a sustainable solution for vibrant and durable color reproduction by leveraging the light-manipulating properties of nanostructures. However, the fabrication of plasmonic nanostructures has posed challenges, hindering widespread adoption. In this paper, we introduce plasmonic reflector arrays (PRAs) composed of three layers─Ag nanoparticles (NPs), an Al2O3 spacer, and an Ag reflector─deposited via physical vapor deposition (PVD). By employing nanosecond and femtosecond laser writing techniques, we manipulate the surface morphology of silver nanoparticles on PRAs, resulting in a diverse range of structural colors that are both polarization-insensitive and polarization-sensitive. Furthermore, we demonstrate the versatility of nanosecond laser writing in creating intricate patterns on PRAs. Additionally, we propose a novel two-step method combining nanosecond and femtosecond laser processing to embed QR code patterns into PRAs, showcasing their potential for secure data encryption and transmission. This research underscores the promising applications of PRAs in advanced color printing and secure optical data encoding.

Hierarchically Structured Nanocomposites via Mixed-Graft Block Copolymer Templating: Achieving Controlled Nanostructure and Functionality

Integrating inorganic and polymerized organic functionalities to create composite materials presents an efficient strategy for the discovery and fabrication of multifunctional materials. The characteristics of these composites go beyond a simple sum of individual component properties; they are profoundly influenced by the spatial arrangement of these components and the resulting homo-/hetero-interactions. In this work, we develop a facile and highly adaptable approach for crafting nanostructured polymer-inorganic composites, leveraging hierarchically assembling mixed-graft block copolymers (mGBCPs) as templates. These mGBCPs, composed of diverse polymeric side chains that are covalently tethered with a defined sequence to a linear backbone polymer, self-assemble into ordered hierarchical structures with independently tuned nano- and mesoscale lattice features. Through the coassembly of mGBCPs with diversely sized inorganic fillers such as metal ions (ca. 0.1 nm), metal oxide clusters (0.5-2 nm), and metallic nanoparticles (>2 nm), we create three-dimensional filler arrays with controlled interfiller separation and arrangement. Multiple types of inorganic fillers are simultaneously integrated into the mGBCP matrix by introducing orthogonal interactions between distinct fillers and mGBCP side chains. This results in nanocomposites where each type of filler is selectively segregated into specific nanodomains with matrix-defined orientations. The developed coassembly strategy offers a versatile and scalable pathway for hierarchically structured nanocomposites, unlocking new possibilities for advanced materials in the fields of optoelectronics, sensing, and catalysis.

Flexible and Transparent Ceramic Nanocomposite for Laboratory X-ray Imaging of Micrometer Resolution

Transparent nanocomposites have attracted considerable attention in many areas including X-ray imaging, wearable electronics, and volumetric display. However, both the transparency and the flexibility were largely jeopardized by the loading content of functional nanoparticles (NPs), posing a major challenge to material engineering. Herein, an ultra-high-loading-ceramic nanocomposite film was fabricated by a blade-coating technique. The film exhibited a high transparency over ∼89% in the whole visible region even with a fluoride-ceramic content up to ∼83 wt %. Based on a real-time investigation on the formation process of the film, the refractive-index difference between the nanoparticles and matrix was identified as the dominating factor to transparency. The transmittance spectra based on Rayleigh scattering theory were simulated to screen both nanoparticle radius and loading content, leading to the discovery of a transparency zone for film making. As a proof-of-concept experiment, the transparent film was used as an X-ray scintillation screen, which exhibited a comparable light yield to that of LYSO owing to the mitigated self-absorption effect. The homemade imager demonstrated a spatial resolution of 122 lp/mm, representing a record resolution of 4.1 μm for laboratory X-ray photography. Our work not only provided an experimental procedure to make high-loading functional films but also demonstrated a theoretical model to guide the search for gradients of transparent composites.

Hybrid Layers of Donor-Acceptor Copolymers with Homogenous Silver Nanoparticle Coverage for Photonic Applications

Hybrid layers of donor-acceptor (D-A) copolymers containing N,N′-dialkylperylene-3,4,9,10-tetracarboxydiimide electron-acceptor units covered with silver nanoparticles (Ag-NPs) were prepared by electrochemical doping of pristine layers during reduction processes. In situ optical absorption spectra of the layers were recorded during the formation of Ag-NP coverage. The hybrid layers were characterized by absorption spectroscopy, scanning electron microscopy (SEM), X-ray photoelectron spectroscopy (XPS), and energy dispersive X-ray spectroscopy (EDX). In the absorption spectra of the hybrid layers, a surface plasmon band characteristic of Ag-NPs appeared. Significant improvements in light absorption due to the plasmonic effects of Ag NPs were observed. Stable Ag-NPs with an average diameter of 41–63 nm were formed on the surface, as proven by SEM and XPS. The Ag-NP coverage and size depended on the hybrid layer preparation conditions and on the copolymer composition. The metallic character of the Ag-NPs was proven by XPS. The location in the surface layer was further confirmed by EDX analysis. To the best of our knowledge, this is the first report on such hybrid layers having the potential for a variety of photonic and electronic applications.

Effect of Light Intensity on the Aggregation Behavior of Primary Particles during In Situ Photochemical Synthesis of Gold/Polymer Nanocomposites

Metal/polymer nanocomposites have attracted much attention in recent years due to their exceptional properties and wide range of potential applications. A key challenge to obtain these materials is to stabilize the metal nanoparticles in the matrix, avoiding uncontrolled aggregation processes driven by the high surface free energy of nanosized particles. Here, we investigate the aggregation mechanism of primary particles in gold-epoxy nanocomposites prepared via light-assisted in situ synthesis, under different irradiation conditions. The growth and aggregation of gold nanoparticles were monitored in situ by time-resolved small-angle X-ray scattering experiments, whereas spectroscopic measurements were performed to interpret how matrix polymerization influences the aggregation process. It was found that light intensity has a greater influence on the reduction rate than on the polymerization rate. Under irradiation, gold nanostructures evolve through five time-defined stages: nuclei-mass fractals-surface fractals-spherical nanoparticles-aggregates. If the maximum in the polymerization rate is reached before the aggregation step, individual primary nanoparticles will be preserved in the polymer matrix due to diffusional constraints imposed by the reaction medium. Because the light intensity has a different influence on the reduction rate than on the polymerization rate, this parameter can be used as a versatile tool to avoid aggregation of gold nanoparticles into the polymer matrix.

Tunable Optical Property of Plasmonic-Polymer Nanocomposites Composed of Multilayer Nanocrystal Arrays Stacked in a Homogeneous Polymer Matrix

Layer-by-layer (LbL) synthetic technique has been used to deposit multilayers composed of a wide range of materials including polymers, colloidal particles, and biomolecules. A more complex organization of nanocomponents-within layers (intralayer) and across layers (interlayer)-beyond simple deposition is required for manufacturing next-generation materials and devices. Recently, LbL was used to fabricate multilayer stacked polymer-nanocrystal nanocomposites composed of a stacking sequence of two immiscible polymer thin films. However, the requirement of two immiscible polymers limits its widespread use for the fabrication of various nanocomposites. Here, we presented a new and simplified synthetic method for the fabrication of multilayer stacked nanocomposites composed of multilayer plasmonic nanocrystal arrays stacked in a homogeneous polymer matrix via iterative sequential LbL deposition of polymer thin films and nanocrystal arrays. This novel fabrication technique requires strong attractive interaction between the "ligand shell" on the nanocrystal surface and the polymer matrix [Flory-Huggins interaction parameter of the ligand shell-polymer matrix (χ) < 0], which can dramatically enhance the stability of nanocomposites during the LbL deposition. The optical properties of plasmonic nanocomposites can be manipulated by the adjustment of the intrinsic property of the nanocrystal and/or coupling effect between adjacent nanocrystals from the same layer (intralayer) and/or the neighboring layer (interlayer). Taking advantage of this novel LbL fabrication technique, the properties of multilayer plasmonic nanocrystal arrays stacked in a homogeneous matrix can be manipulated via tuning the interlayer or intralayer coupling between nanocrystals, which can be achieved by sophisticated control of the packing density of two-dimensional nanocrystal arrays in each individual layer or the thickness of the polymer thin film between two adjacent nanocrystal arrays, respectively. These results provide a facile and effective way of designing a more complex multilayer nanostructure with controllable properties in a homogeneous polymer matrix.

Plasmonic Metallic Heteromeric Nanostructures

Binary, ternary, and other high-order plasmonic heteromers possess remarkable physical and chemical properties, enabling them to be used in numerous applications. The seed-mediated approach is one of the most promising and versatile routes to produce plasmonic heteromers. Selective growth of one or multiple domains on desired sites of noble metal, semiconductor, or magnetic seeds would form desired heteromeric nanostructures with multiple functionalities and synergistic effects. In this work, the challenges for the synthetic approaches are discussed with respect to tuning the thermodynamics, as well as the kinetic properties (e.g., pH, temperature, injection rate, among others). Then, plasmonic heteromers with their structure advantages displaying unique activities compared to other hybrid nanostructures (e.g., core-shell, alloy) are highlighted. Some of the main most recent applications of plasmonic heteromers are also presented. Finally, perspectives for further exploitation of plasmonic heteromers are demonstrated. The goal of this work is to provide the current know-how on the synthesis routes of plasmonic heteromers in a summarized manner, so as to achieve a better understanding of the resulting properties and to gain an improved control of their performances and extend their breadth of applications.