Fast Electrochemical Storage Process in Sputtered Nb2O5 Porous Thin Films

High Capacitance Porous Ruthenium Nitride Films with High Rate Capability for Micro-Supercapacitors

The demand for high-performance energy storage devices to power Internet of Things applications has driven intensive research on micro-supercapacitors (MSCs). In this study, RuN films made by magnetron sputtering as an efficient electrode material for MSCs are investigated. The sputtering parameters are carefully studied in order to maximize film porosity while maintaining high electrical conductivity, enabling a fast charging process. Using a combination of advanced techniques, the relationships among the morphology, structure, and electrochemical properties of the RuN films are investigated. The films are shown to have a complex structure containing a mixture of crystallized Ru and RuN phases with an amorphous oxide layer. The combination of high electrical conductivity and pseudocapacitive charge storage properties enabled a 16 µm-thick RuN film to achieve a capacitance value of 0.8 F cm-2 in 1 m KOH with ultra-high rate capability.

Nanofeather ruthenium nitride electrodes for electrochemical capacitors

Fast charging is a critical concern for the next generation of electrochemical energy storage devices, driving extensive research on new electrode materials for electrochemical capacitors and micro-supercapacitors. Here we introduce a significant advance in producing thick ruthenium nitride pseudocapacitive films fabricated using a sputter deposition method. These films deliver over 0.8 F cm-2 (~500 F cm-3) with a time constant below 6 s. By utilizing an original electrochemical oxidation process, the volumetric capacitance doubles (1,200 F cm-3) without sacrificing cycling stability. This enables an extended operating potential window up to 0.85 V versus Hg/HgO, resulting in a boost to 3.2 F cm-2 (3,200 F cm-3). Operando X-ray absorption spectroscopy and transmission electron microscopy analyses reveal novel insights into the electrochemical oxidation process. The charge storage mechanism takes advantage of the high electrical conductivity and the morphology of cubic ruthenium nitride and Ru phases in the feather-like core, leading to high electrical conductivity in combination with high capacity. Accordingly, we have developed an analysis that relates capacity to time constant as a means of identifying materials capable of retaining high capacity at high charge/discharge rates.

Nb2O5 Coating to Improve the Cyclic Stability and Voltage Decay of Li-Rich Cathode Material for Lithium-Ion Battery

The commercialization of lithium manganese oxide (LMO) is seriously hindered by several drawbacks, such as low initial Coulombic efficiency, the degradation of the voltage and capacity during cycling, and the poor rating performance. Developing a simple and scalable synthesis for engineering with surface coating layers is significant and challenging for the commercial prospects of LMO oxides. Herein, we have proposed an efficient engineering strategy with a Nb₂O₅ coating layer. We dissolved niobate (V) ammonium oxalate hydrate and stoichiometric rich LMO (RLM) in deionized water and stirred constantly. Then, the target product was calcined at high temperature. The discharge capacity of the Nb₂O₅ coating RLM is increased from 195 mAh·g^-1 (the RLM without Nb₂O₅) to 215 mAh·g^-1 at a coating volume ratio of 0.010. The average voltage decay was 4.38 mV/cycle, which was far lower than the 7.50 mV/cycle for the pure LMO. The electrochemical kinetics results indicated that the performance was superior with the buffer engineering by the Nb₂O₅ coating of RLM, which provided an excellent lithium-ion conduction channel, and improved diffusion kinetics, capacity fading, and voltage decay. This reveals the strong potential of the Nb₂O₅ coating in the field of cathode materials for lithium-ion batteries.

Fast X-ray Nanotomography with Sub-10 nm Resolution as a Powerful Imaging Tool for Nanotechnology and Energy Storage Applications

In the last decade, transmission X-ray microscopes (TXMs) have come into operation in most of the synchrotrons worldwide. They have proven to be outstanding tools for non-invasive ex and in situ 3D characterization of materials at the nanoscale across varying range of scientific applications. However, their spatial resolution has not improved in many years, while newly developed functional materials and microdevices with enhanced performances exhibit nanostructures always finer. Here, optomechanical breakthroughs leading to fast 3D tomographic acquisitions (85 min) with sub-10 nm spatial resolution, narrowing the gap between X-ray and electron microscopy, are reported. These new achievements are first validated with 3D characterizations of nanolithography objects corresponding to ultrahigh-aspect-ratio hard X-ray zone plates. Then, this powerful technique is used to investigate the morphology and conformality of nanometer-thick film electrodes synthesized by atomic layer deposition and magnetron sputtering deposition methods on 3D silicon scaffolds for electrochemical energy storage applications.

Precisely Tunable T-Nb2O5 Nanotubes via Atomic Layer Deposition for Fast-Charging Lithium-Ion Batteries

The demand for fast-charging of lithium-ion batteries (LIBs) in modern electric transportation and wearable electronics is rapidly growing. However, commercially available graphite anodes still suffer from slow kinetics of lithium-ion diffusion and severe safety concerns of lithium plating when achieving the fast-charging goal. Here, it is demonstrated that the Li-ion diffusion kinetics of orthorhombic Nb₂O₅ nanotubes (T-Nb₂O₅ NTs) is enhanced by atomically precise manufacturing of nanoarchitectures. The controlled fabrication of T-Nb₂O₅ NTs with wall thicknesses from 24 to 43 nm is realized via atomic layer deposition (ALD) using electrospun polyacrylonitrile nanofibers as a sacrificing template. The wall thickness of T-Nb₂O₅ NTs can be precisely tuned by adjusting the number of ALD cycles. The relationship between the wall thicknesses and electrochemical performances is investigated in detail. The electrochemical kinetic analysis suggests that the lithium storage in T-Nb₂O₅ NTs is dominated by surface and intercalation pseudocapacitance. The morphology of T-Nb₂O₅ crystallites is found to have significant effects on the Li-ion insertion/extraction kinetics and the performance of the electrodes in LIBs. The resulting T-Nb₂O₅ NTs exhibit fast charge-storage kinetics and enable highly reversible insertion/extraction of Li ions without a phase change. This work may open up a new avenue for further development of intercalation-pseudocapacitive nanostructured materials for high-rate and ultrastable energy-storage devices.

Oriented Assembly of Anisotropic Nanosheets into Ultrathin Flowerlike Superstructures for Energy Storage

The hierarchical ultrathin nanostructures are excellent electrode materials for supercapacitors because of their large surface area and their ability to promote ion and electron transport. Herein, we investigated nine l-amino acids (LAs) as inductive agents to synthesize a series of CoNi-OH/LAs materials for energy storage. With the different amino acids, the assembled CoNi-OH/LAs form a lamellar, flower-shaped, and bulk structure. Among all materials, the ultrathin flowerlike CoNi₂-OH/l-asparagine (CoNi₂-OH/l-Asn) exhibits an excellent specific capacity of 405.4 mAh g^-1 (2608 F g^-1) and a 100% retention rate after 3000 cycles. We also assembled asymmetrical supercapacitor CoNi₂-OH/l-Asn//N-rGO devices, which demonstrated an energy density of 64.9 Wh kg^-1 at 799.9 W kg^-1 and superlong cycling stability (82.4% at 10 A g^-1) over 5000 cycles.

Redox Tuning in Crystalline and Electronic Structure of Bimetal-Organic Frameworks Derived Cobalt/Nickel Boride/Sulfide for Boosted Faradaic Capacitance

The development of efficient electrode materials is a cutting-edge approach for high-performance energy storage devices. Herein, an effective chemical redox approach is reported for tuning the crystalline and electronic structures of bimetallic cobalt/nickel-organic frameworks (Co-Ni MOFs) to boost faradaic redox reaction for high energy density. The as-obtained cobalt/nickel boride/sulfide exhibits a high specific capacitance (1281 F g^-1 at 1 A g^-1 ), remarkable rate performance (802.9 F g^-1 at 20 A g^-1 ), and outstanding cycling stability (92.1% retention after 10 000 cycles). An energy storage device fabricated with a cobalt/nickel boride/sulfide electrode exhibits a high energy density of 50.0 Wh kg^-1 at a power density of 857.7 W kg^-1 , and capacity retention of 87.7% (up to 5000 cycles at 12 A g^-1 ). Such an effective redox approach realizes the systematic electronic tuning that activates the fast faradaic reactions of the metal species in cobalt/nickel boride/sulfide which may shed substantial light on inspiring MOFs and their derivatives for energy storage devices.