Polymer-Assisted Nanoimprinting for Environment- and Phase-Stable Perovskite Nanopatterns

Luminescent Perovskite-Cross-Linked Polymer with Low Shrinkage and Excellent Stability

When organic cross-linked polymers are combined with metal halide perovskite nanocrystals (PNCs) for realizing luminescent perovskite-polymer display materials, the stability of PNCs is enhanced and their shrinkage is suppressed. This work presents a feasible strategy for preparing CsPbBr3 nanocrystals (NCs) within a polydicyclopentadiene (PDCPD) thermosetting cross-linked resin matrix simultaneously via a one-step reaction. The obtained PDCPD@PNCs composite exhibits narrow peak half-widths (15-20 nm), high light transmittance (80%), low curing volume shrinkage (1.4%), tunable tensile properties, excellent stability, and a photoluminescence quantum yield (PLQY) of 44.3%. The composite material exhibits long-term stability in water, acid, and base solutions for over 90 days, with the PL intensity being maintained at over 90%. Furthermore, the composite is highly resistant to polar organic solvents owing to the insolubility imparted by cross-linking. White LEDs (WLED) fabricated using the as-prepared composite demonstrate excellent potential as light sources in optical devices.

Sub-30 nm 2D Perovskites Patterns via Block Copolymer Guided Self-Assembly for Color Conversion Optical Polarizer

Despite the remarkable advances made in the development of 2D perovskites suitable for various high-performance devices, the development of sub-30 nm nanopatterns of 2D perovskites with anisotropic photoelectronic properties remains challenging. Herein, a simple but robust route for fabricating sub-30 nm 1D nanopatterns of 2D perovskites over a large area is presented. This method is based on nanoimprinting a thin precursor film of a 2D perovskite with a topographically pre-patterned hard poly(dimethylsiloxane) mold replicated from a block copolymer nanopattern consisting of guided self-assembled monolayered in-plane cylinders. 1D nanopatterns of various 2D perovskites (A'2 MAn -1 Pbn X3 n +1 ,A' = BA, PEA, X = Br, I) are developed; their enhanced photoluminescence (PL) quantum yields are approximately four times greater than those of the corresponding control flat films. Anisotropic photocurrent is observed because 2D perovskite nanocrystals are embedded in a topological 1D nanopattern. Furthermore, this 1D metal-coated nanopattern of a 2D perovskite is employed as a color conversion optical polarizer, in which polarized PL is developed. This is due to its capability of polarization of an incident light arising from the sub-30 nm line pattern, as well as the PL of the confined 2D perovskite nanocrystals in the pattern.

Patterning of Metal Halide Perovskite Thin Films and Functional Layers for Optoelectronic Applications

In recent years, metal halide perovskites have received significant attention as materials for next-generation optoelectronic devices owing to their excellent optoelectronic properties. The unprecedented rapid evolution in the device performance has been achieved by gaining an advanced understanding of the composition, crystal growth, and defect engineering of perovskites. As device performances approach their theoretical limits, effective optical management becomes essential for achieving higher efficiency. In this review, we discuss the status and perspectives of nano to micron-scale patterning methods for the optical management of perovskite optoelectronic devices. We initially discuss the importance of effective light harvesting and light outcoupling via optical management. Subsequently, the recent progress in various patterning/texturing techniques applied to perovskite optoelectronic devices is summarized by categorizing them into top-down and bottom-up methods. Finally, we discuss the perspectives of advanced patterning/texturing technologies for the development and commercialization of perovskite optoelectronic devices.

Distributed Feedback Lasers by Thermal Nanoimprint of Perovskites Using Gelatin Gratings

To date, thermal nanoimprint lithography (NIL) for patterning hybrid perovskites has always involved an intricate etching step of a hard stamp material or its master. Here, we demonstrate for the first time the successful nanopatterning of a perovskite film by NIL with a low-cost polymeric stamp. The stamp consists of a dichromated gelatin grating structured by holographic lithography. The one-dimensional grating is imprinted into a perovskite film at 95 °C and 90 MPa for 10 min, resulting in a high quality second-order distributed feedback (DFB) laser. The laser exhibits an excellent performance with a threshold of 81 μJ/cm2, a line width of 0.32 nm, and a pronounced linear polarization. This novel approach enables cost-effective fabrication of high-quality DFB lasers compatible with different perovskite compositions and photonic nanostructures for a wide range of applications.

Synthesis of MAPbBr3 -Polymer Composite Films by Photolysis of DMF: Toward Transparent and Flexible Optical Physical Unclonable Functions (PUFs) with Hierarchical Multilevel Complexity

Physical entities with inherent randomness have been investigated as anti-counterfeiting labels based on physical unclonable functions (PUFs). Herein, a transparent and flexible optical PUF label associated with multilevel complexity is demonstrated by taking advantage of the optical properties of hierarchical morphologies of the composite film composed of metal halide perovskite nanoparticles (MAPbBr₃ NPs) and the intrinsic spinodal-decomposition-like phase separation of polymer blend (PMMA/PS blend). Due to the combinatorial effects of the photolysis synthesis of MAPbBr₃ and the thermodynamic instability of the PMMA/PS blend, randomized patterns emerge at two-level scales. These patterns are intrinsically non-deterministic, and therefore, the PUF labels from the multilevel random patterns are challenging to replicate. This is mainly attributed to random spot patterns (higher-level patterns) confined within intricate bicontinuous patterns (lower-level patterns).

Poly(vinylidene fluoride)-Stabilized Black γ-Phase CsPbI3 Perovskite for High-Performance Piezoelectric Nanogenerators

Halide perovskite materials have been recently recognized as promising materials for piezoelectric nanogenerators (PENGs) due to their potentially strong ferroelectricity and piezoelectricity. Here, we report a new method using a poly(vinylidene fluoride) (PVDF) polymer to achieve excellent long-term stable black γ-phase CsPbI₃ and explore the piezoelectric performance on a CsPbI₃@PVDF composite film. The PVDF-stabilized black-phase CsPbI₃ perovskite composite film can be stable under ambient conditions for more than 60 days and over 24 h while heated at 80 °C. Piezoresponse force spectroscopy measurements revealed that the black CsPbI₃/PVDF composite contains well-developed ferroelectric properties with a high piezoelectric charge coefficient (d ₃₃) of 28.4 pm/V. The black phase of the CsPbI₃-based PVDF composite exhibited 2 times higher performance than the yellow phase of the CsPbI₃-based composite. A layer-by-layer stacking method was adopted to tune the thickness of the composite film. A five-layer black-phase CsPbI₃@PVDF composite PENG exhibited a voltage output of 26 V and a current density of 1.1 μA/cm². The output power can reach a peak value of 25 μW. Moreover, the PENG can be utilized to charge capacitors through a bridge rectifier and display good durability without degradation for over 14 000 cyclic tests. These results reveal the feasibility of the all-inorganic perovskite for the design and development of high-performance piezoelectric nanogenerators.

Recent Advances in Synthesis, Properties, and Applications of Metal Halide Perovskite Nanocrystals/Polymer Nanocomposites

Metal halide perovskite nanocrystals (PNCs) have recently garnered tremendous research interest due to their unique optoelectronic properties and promising applications in photovoltaics and optoelectronics. Metal halide PNCs can be combined with polymers to create nanocomposites that carry an array of advantageous characteristics. The polymer matrix can bestow stability, stretchability, and solution-processability while the PNCs maintain their size-, shape- and composition-dependent optoelectronic properties. As such, these nanocomposites possess great promise for next-generation displays, lighting, sensing, biomedical technologies, and energy conversion. The recent advances in metal halide PNC/polymer nanocomposites are summarized here. First, a variety of synthetic strategies for crafting PNC/polymer nanocomposites are discussed. Second, their array of intriguing properties is examined. Third, the broad range of applications of PNC/polymer nanocomposites is highlighted, including light-emitting diodes (LEDs), lasers, and scintillators. Finally, an outlook on future research directions and challenges in this rapidly evolving field are presented.

Solution-Processed Perovskite Field-Effect Transistor Artificial Synapses

Metal halide perovskites are distinctive semiconductors that exhibit both ionic and electronic transport and are promising for artificial synapses. However, developing a 3-terminal transistor artificial synapse with the perovskite channel remains elusive due to the lack of a proper technique to regulate mobile ions in a non-volatile manner. Here, a solution-processed perovskite transistor is reported for artificial synapses through the implementation of a ferroelectric gate. The ferroelectric polarization provides a non-volatile electric field on the perovskite, leading to fixation of the mobile ions and hence modulation of the electronic conductance of the channel. Multi-state channel conductance is realized by partial ferroelectric polarization. The ferroelectric-gated perovskite transistor is successfully used as an artificial synapse that emulates basic synaptic functions such as long-term plasticity with excellent linearity, short-term as well as spike-timing-dependent plasticity. The strategy to regulate ion dynamics in the perovskites using the ferroelectric gate suggests a generic route to employ perovskites for synaptic electronics.

Spatially Ordered Arrays of Colloidal Inorganic Metal Halide Perovskite Nanocrystals via Controlled Droplet Evaporation in a Confined Geometry

Inorganic metal halide perovskite nanocrystals, such as quantum dots (QDs), have emerged as intriguing building blocks for miniaturized light-emitting and optoelectronic devices. Although conventional lithographic approaches and printing techniques allow for discrete patterning at the micro/nanoscale, it is still important to utilize intrinsic QDs with the concomitant retaining of physical and chemical stability during the fabrication process. Here, we report a simple strategy for the evaporative self-assembly to produce highly ordered structures of CsPbBr₃ and CsPbI₃ QDs on a substrate in a precisely controllable manner by using a capillary-bridged restrict geometry. Quantum confined CsPbBr₃ and CsPbI₃ nanocrystals, synthesized via a modified hot-injection method with excess halide ions condition, were readily adapted to prepare colloidal QD solutions. Subsequently, the spatially patterned arrays of the perovskite QD rings were crafted in a confirmed geometry with high fidelity by spontaneous solvent evaporation. These self-organized concentric rings were systemically characterized regarding the center-to-center distance, width, and height of the patterns. Our results not only facilitate a fundamental understanding of assembly in the perovskite QDs to enable the solution-printing process but also provide a simple route for offering promising practical applications in optoelectronics.

Room-Temperature Halide Perovskite Field-Effect Transistors by Ion Transport Mitigation

Solution-processed halide perovskites have emerged as excellent optoelectronic materials for applications in photovoltaic solar cells and light-emitting diodes. However, the presence of mobile ions in the material hinders the development of perovskite field-effect transistors (FETs) due to screening of the gate potential in the nearby perovskite channel, and the resulting impediment to achieving gate modulation of an electronic current at room temperature. Here, room-temperature operation is demonstrated in cesium lead tribromide (CsPbBr3 ) perovskite-based FETs using an auxiliary ferroelectric gate of poly(vinylidenefluoride-co-trifluoroethylene) [P(VDF-TrFE)], to electrostatically fixate the mobile ions. The large interfacial polarization of the ferroelectric gate attracts the mobile ions away from the main nonferroelectric gate interface, thereby enabling modulation of the electronic current through the channel by the main gate. This strategy allows for realization of the p-type CsPbBr3 channel and revealing the thermally activated nature of the hole charge transport. The proposed strategy is generic and can be applied for regulating ions in a variety of ionic-electronic mixed semiconductors.

All-Inorganic Perovskite Nanorod Arrays with Spatially Randomly Distributed Lasing Modes for All-Photonic Cryptographic Primitives

The level of hardware or information security can be increased by applying physical unclonable functions (PUFs), which have a high complexity and unique nonreplicability and are based on random physical patterns generated by nature, to anticounterfeiting and encryption technologies. The preparation of PUFs should be as simple and convenient as possible, while maintaining the high complexity and stability of PUFs to ensure high reliability in use. In this study, an all-inorganic perovskite single-crystal array with a controllable morphology and a random size was prepared by a one-step recrystallization method in a solvent atmosphere to generate all-photonic cryptographic primitives. The nondeterministic size of the perovskite nanorods mainly arises from crystal growth in an indeterminate direction, producing a high entropy for the system. The cavity-size-dependent lasing emission behavior of perovskite single crystals was investigated as a preliminary exploration of the generation of all-photonic cryptographic primitives. The lasing-mode number was positively correlated with the length of the perovskite nanorods. Therefore, the prepared perovskite nanorod array with random sizes can be transformed into a quaternary cryptographic key array following encoding rules based on the lasing-mode number. Superior lasing stability was observed for the all-inorganic perovskite under continuous excitation, demonstrating the high reliability of this system.

3D Heterogeneous Device Arrays for Multiplexed Sensing Platforms Using Transfer of Perovskites

Despite recent substantial advances in perovskite materials, their 3D integration capability for next-generation electronic devices is limited owing to their inherent vulnerability to heat and moisture with degradation of their remarkable optoelectronic properties during fabrication processing. Herein, a facile method to transfer the patterns of perovskites to planar or nonplanar surfaces using a removable polymer is reported. After fabricating perovskite devices on this removable polymer film, the conformal attachment of this film on target surfaces can place the entire devices on various substrates by removing this sacrificial film. This transfer method enables the formation of a perovskite image sensor array on a soft contact lens, and in vivo tests using rabbits demonstrate its wearability. Furthermore, 3D heterogeneous integration of a perovskite photodetector array with an active-matrix array of pressure-sensitive silicon transistors using this transfer method demonstrates the formation of a multiplexed sensing platform detecting distributions of light and tactile pressure simultaneously.

Upside-Down Molding Approach for Geometrical Parameter-Tunable Photonic Perovskite Nanostructures

Considering that the periodic photonic nanostructures are commonly realized by expensive nanofabrication processes and the tunability of structure parameters is limited and complicated, we demonstrate a solution-processed upside-down molding method to fabricate photonic resonators on perovskites with a pattern geometry controllable to a certain extent. This upside-down approach not only reveals the effect of capillary force during the imprinting but also can control the waveguide layer thickness due to the inversion of the perovskite membranes.

Engineering bandgap of CsPbI3 over 1.7 eV with enhanced stability and transport properties

Potential multijunction application of CsPbI₃ perovskite with silicon solar cells to reach efficiencies beyond the Shockley-Queisser limit motivates tremendous efforts to improve its phase stability and further enlarge its band gap between 1.7 and 1.8 eV. Current strategies to increase band gap via conventional mixed halide engineering are accompanied by detrimental phase segregation under illumination. Here, ethylammonium (EA) in a relatively small fraction (x < 0.15) is first investigated to fit into three-dimensional CsPbI₃ framework to form pure-phase hybrid perovskites with enlarged band gap over 1.7 eV. The increase of band gap is closely associated with the distortion of Pb-I octahedra and the variation of the average Pb-I-Pb angle. Meanwhile, the introduction of EA can retard the crystallization of perovskite and tune the perovskite structure with enhanced phase stability and transport properties.

Ultrathin and Conformable Lead Halide Perovskite Photodetector Arrays for Potential Application in Retina-Like Vision Sensing

Solution-processed lead halide perovskites are considered one of the promising materials for flexible optoelectronics. However, the array integration of ultrathin flexible perovskite photodetectors (PDs) remains a significant challenge limited by the incompatibility of perovskite materials with manufacturing techniques involving polar liquids. Here, an ultrathin (2.4 µm) and conformable perovskite-based PD array (10 × 10 pixels) with ultralight weight (3.12 g m^-2 ) and excellent flexibility, is reported. Patterned all-inorganic CsPbBr₃ perovskite films with precise pixel position, controllable morphology, and homogenous dimension, are synthesized by a vacuum-assisted drop-casting patterning process as the active layer. The use of waterproof parylene-C film as substrate and encapsulation layer effectively protects the perovskite films against penetration of polar liquids during the peeling-off process. Benefitting from the encapsulation and ultrathin property, the device exhibits long-term stability in the ambient environment, and robust mechanical stability under bending or 50% compressive strain. More importantly, the ultrathin flexible PD arrays conforming to hemispherical support realize imaging of light distribution, indicating the potential applications in retina-like vision sensing.

Electronic effects of nano-confinement in functional organic and inorganic materials for optoelectronics

This review provides a comprehensive overview of the electronic effects of nano-confinement (from 1D to 3D geometries) on optoelectronic materials and their applications.

Surface-Plasmon-Enhanced Perovskite Light-Emitting Diodes

Perovskite light-emitting diodes (PeLEDs) have attracted considerable attention because of their potential in display and lighting applications. To promote commercialization of PeLEDs, it is important to improve the external quantum efficiency of the devices, which depends on their internal quantum efficiency (IQE) and light extraction efficiency. Optical simulations have revealed that 20-50% of the light generated in the device will be lost to surface plasmon (SP) modes formed in the metal/dielectric interfaces. Therefore, extracting the optical energy in SP modes to the air will greatly increase the light extraction efficiency of PeLEDs. In addition, the SPs can accelerate radiative recombination of the emitter via near-field effects. Thus, the IQE of a PeLED can also be enhanced by SP manipulation. In this review, first, general concepts of the SPs and how they can enhance the efficiency of LEDs are introduced. Then recent progresses in SP-enhanced emission of perovskite films and LEDs are systematically reviewed. After that, the challenges and opportunities of the SP-enhanced PeLEDs are shown, followed by an outlook of further development of the SPs in perovskite optoelectronic devices.