Electron Tunneling through Boron Nitride Confirms Marcus-Hush Theory Predictions for Ultramicroelectrodes

Horizontal Lithium Electrodeposition on Atomically Polarized Monolayer Hexagonal Boron Nitride

Both uncontrolled Li dendrite growth and corrosion are major obstacles to the practical application of Li-metal batteries. Despite numerous attempts to address these challenges, effective solutions for dendrite-free reversible Li electrodeposition have remained elusive. Here, we demonstrate the horizontal Li electrodeposition on top of atomically polarized monolayer hexagonal boron nitride (hBN). Theoretical investigations revealed that the hexagonal lattice configuration and polarity of the monolayer hBN, devoid of dangling bonds, reduced the energy barrier for the surface diffusion of Li, thus facilitating reversible in-plane Li growth. Moreover, the single-atom-thick hBN deposited on a Cu current collector (monolayer hBN/Cu) facilitated the formation of an inorganic-rich, homogeneous solid electrolyte interphase layer, which enabled the uniform Li+ flux and suppressed Li corrosion. Consequently, Li-metal and anode-free full cells containing the monolayer hBN/Cu exhibited improved rate performance and cycle life. This study suggests that the monolayer hBN is a promising class of underlying seed layers to enable dendrite- and corrosion-free, horizontal Li electrodeposition for sustainable Li-metal anodes in next-generation batteries.

Enhanced Long-Term Stability of Crystalline Nickel-Boride (Ni23B6) Electrocatalyst by Encapsulation with Hexagonal Boron Nitride

Nickel boride catalysts show great potential as low-cost and efficient alternatives to noble-metal catalysts in acidic media; however, synthesizing and isolating a specific phase and composition of nickel boride is nontrivial, and issues persist in their long-term stability as electrocatalysts. Here, a single-crystal nickel boride, Ni23B6, is reported which exhibits high electrocatalytic activity for the hydrogen evolution reaction (HER) in an acidic solution, and that its poor long-term stability can be overcome via encapsulation by single-crystal trilayer hexagonal boron nitride (hBN) film. Interestingly, hBN-covered Ni23B6 on a Ni substrate shows an identical overpotential of 52 mV at a current density of 10 mA cm-2 to that of bare Ni23B6. This phenomenon indicates that the single-crystalline hBN layer is catalytically transparent and does not obstruct HER activation. The hBN/Ni23B6/Ni has remarkable long-term stability with negligible changes to its polarization curves for 2000 cycles, whereas the Ni23B6/Ni shows significant degradation after 650 cycles. Furthermore, chronoamperometric measurements indicate that stability is preserved for >20 h. Long-term stability tests also reveal that the surface morphology and chemical structure of the hBN/Ni23B6/Ni electrode remain preserved. This work provides a model for the practical design of robust and durable electrochemical catalysts through the use of hBN encapsulation.

Electrochemistry at the Edge of a van der Waals Heterostructure

Artificial van der Waals heterostructures, obtained by stacking two-dimensional (2D) materials, represent a novel platform for investigating physicochemical phenomena and applications. Here, the electrochemistry at the one-dimensional (1D) edge of a graphene sheet, sandwiched between two hexagonal boron nitride (hBN) flakes, is reported. When such an hBN/graphene/hBN heterostructure is immersed in a solution, the basal plane of graphene is encapsulated by hBN, and the graphene edge is exclusively available in the solution. This forms an electrochemical nanoelectrode, enabling the investigation of electron transfer using several redox probes, e.g., ferrocene(di)methanol, hexaammineruthenium, methylene blue, dopamine and ferrocyanide. The low capacitance of the van der Waals edge electrode facilitates cyclic voltammetry at very high scan rates (up to 1000 V s-1), allowing voltammetric detection of redox species down to micromolar concentrations with sub-second time resolution. The nanoband nature of the edge electrode allows operation in water without added electrolyte. Finally, two adjacent edge electrodes are realized in a redox-cycling format. All the above-mentioned phenomena can be investigated at the edge, demonstrating that nanoscale electrochemistry is a new application avenue for van der Waals heterostructures. Such an edge electrode will be useful for studying electron transfer mechanisms and the detection of analyte species in ultralow sample volumes.

One-atom-thick hexagonal boron nitride co-catalyst for enhanced oxygen evolution reactions

Developing efficient (co-)catalysts with optimized interfacial mass and charge transport properties is essential for enhanced oxygen evolution reaction (OER) via electrochemical water splitting. Here we report one-atom-thick hexagonal boron nitride (hBN) as an attractive co-catalyst with enhanced OER efficiency. Various electrocatalytic electrodes are encapsulated with centimeter-sized hBN films which are dense and impermeable so that only the hBN surfaces are directly exposed to reactive species. For example, hBN covered Ni-Fe (oxy)hydroxide anodes show an ultralow Tafel slope of ~30 mV dec-1 with improved reaction current by about 10 times, reaching ~2000 mA cm-2 (at an overpotential of ~490 mV) for over 150 h. The mass activity of hBN co-catalyst is found exceeding that of commercialized catalysts by up to five orders of magnitude. Using isotope experiments and simulations, we attribute the results to the adsorption of oxygen-containing intermediates at the insulating co-catalyst, where localized electrons facilitate the deprotonation processes at electrodes. Little impedance to electron transfer is observed from hBN film encapsulation due to its ultimate thickness. Therefore, our work also offers insights into mechanisms of interfacial reactions at the very first atomic layer of electrodes.

Understanding Electron Transfer Reactions Using Constrained Density Functional Theory: Complications Due to Surface Interactions

The kinetic rates of electrochemical reactions depend on electrodes and molecules in question. In a flow battery, where the electrolyte molecules are charged and discharged on the electrodes, the efficiency of the electron transfer is of crucial importance for the performance of the device. The purpose of this work is to present a systematic atomic-level computational protocol for studying electron transfer between electrolyte and electrode. The computations are done by using constrained density functional theory (CDFT) to ensure that the electron is either on the electrode or in the electrolyte. The ab initio molecular dynamics (AIMD) is used to simulate the movement of the atoms. We use the Marcus theory to predict electron transfer rates and the combined CDFT-AIMD approach to compute the parameters for the Marcus theory where it is needed. We model the electrode with a single layer of graphene and methylviologen, 4,4'-dimethyldiquat, desalted basic red 5, 2-hydroxy-1,4-naphthaquinone, and 1,1-di(2-ethanol)-4,4-bipyridinium were selected for the electrolyte molecules. All of these molecules undergo consecutive electrochemical reactions with one electron being transferred at each stage. Because of significant electrode-molecule interactions, it is not possible to evaluate outer-sphere ET. This theoretical study contributes toward the development of a realistic-level prediction of electron transfer kinetics suitable for energy storage applications.

Trivalent and Pentavalent atoms doped Boron nitride nanosheets as Favipiravir drug carriers for the treatment of COVID-19 using computational approaches

In our DFT investigations, pristine BNNS as well as trivalent and pentavalent atoms doped BNNS have been taken into consideration for Favipiravir (FPV) drug carriers for the treatment of COVID-19. Among the nanosheets, In doped BNNS (BN(In)NS) interacts with FPV by favorable adsorption energies about −2.44 and −2.38 eV in gas and water media respectively. The charge transfer analysis also predicted that a significant amount of charge about 0.202e and 0.27e are transferred to BN(In)NS in gas and water media respectively. HOMO and LUMO energies are greatly affected by the adsorption of FPV on BN(In)NS and energy gap drastically reduced by about 38.80 % and 64.07 % in gas and water media respectively. Similar results are found from the global indices and work function analysis. Therefore, it is clearly seen that dopant In atom greatly modified the BNNS and enhanced the adsorption behavior along with sensitivity, reactivity, polarity towards the FPV.

Deciphering the Molecular Mechanism of Substrate-Induced Assembly of Gold Nanocube Arrays toward an Accelerated Electrocatalytic Effect Employing Heterogeneous Diffusion Field Confinement

The complex electrocatalytic performance of gold nanocubes (AuNCs) is the focus of this work. The faceted shapes of AuNCs and the individual assembly processes at the electrode surfaces define the heterogeneous conditions for the purpose of electrocatalytic processes. Topographic and electron imaging demonstrated slightly rounded AuNC (average of 38 nm) assemblies with sizes of ≤1 μm, where the dominating patterns are (111) and (200) crystallographic planes. The AuNCs significantly impact the electrochemical performance of the investigated electrode [indium-tin oxide (ITO), glassy carbon (GC), and bulk gold] systems driven by surface electrons promoting the catalytic effect. Cyclic voltammetry in combination with scanning electrochemical microscopy allowed us to decipher the molecular mechanism of substrate-induced electrostatic assembly of gold nanocube arrays, revealing that the accelerated electrocatalytic effect should be attributed to the confinement of the heterogeneous diffusion fields with tremendous electrochemically active surface area variations. AuNC drop-casting at ITO, GC, and Au led to various mechanisms of heterogeneous charge transfer; only in the case of GC did the decoration significantly increase the electrochemically active surface area (EASA) and ferrocyanide redox kinetics. For ITO and Au substrates, AuNC drop-casting decreases system dimensionality rather than increasing the EASA, where Au-Au self-diffusion was also observed. Interactions of the gold, ITO, and GC surfaces with themselves and with surfactant CTAB and ferrocyanide molecules were investigated using density functional theory.

Electroprecipitation of Nanometer-Thick Films of Ln(OH)3 [Ln = La, Ce, and Lu] at Pt Microelectrodes and Their Effect on Electron-Transfer Reactions

We report investigations of the deposition of nanometer-thick Ln(OH)₃ films (Ln = La, Ce, and Lu) and their effect on outer-sphere and inner-sphere electron-transfer reactions. Insoluble Ln(OH)₃ films are deposited from aqueous solutions of LaCl₃ onto the surface of 12.5 μm radius Pt microdisk electrodes during water or oxygen reduction. Both reactions produce interfacial OH^-, which complexes with Ln³⁺, resulting in the precipitation of Ln(OH)₃. Surface analyses by scanning electron microscopy (SEM), SEM-energy-dispersive X-ray spectroscopy, and atomic force microscopy indicate the formation of a 1-2 nm thick uniform film. Outer-sphere electron-transfer reactions (Ru(NH₃)₆³⁺ reduction, FcMeOH oxidation, and Fe(CN)₆^4-/3- oxidation/reduction) were investigated at Ln(OH)₃-modified electrodes of different film thicknesses. The results demonstrate that the steady-state transport-limited current for these reactions decreases with an increase in the film thickness. Moreover, the degree of blockage depends upon the redox species, suggesting that the Ln(OH)₃ films are free from pinholes greater than the size of the redox molecules. This suggests that the films are either ionically conducting or that electron tunneling occurs across these thin layers. A similar blocking effect was observed for the inner-sphere reductions of H₂O and O₂. We further demonstrate that the thickness of La(OH)₃ films can be controlled by anodic dissolution. Additionally, we show that La³⁺ lowers the supersaturation of dissolved H₂ required to nucleate a stable nanobubble.

Adiabatic versus non-adiabatic electron transfer at 2D electrode materials

2D electrode materials are often deployed on conductive supports for electrochemistry and there is a great need to understand fundamental electrochemical processes in this electrode configuration. Here, an integrated experimental-theoretical approach is used to resolve the key electronic interactions in outer-sphere electron transfer (OS-ET), a cornerstone elementary electrochemical reaction, at graphene as-grown on a copper electrode. Using scanning electrochemical cell microscopy, and co-located structural microscopy, the classical hexaamineruthenium (III/II) couple shows the ET kinetics trend: monolayer > bilayer > multilayer graphene. This trend is rationalized quantitatively through the development of rate theory, using the Schmickler-Newns-Anderson model Hamiltonian for ET, with the explicit incorporation of electrostatic interactions in the double layer, and parameterized using constant potential density functional theory calculations. The ET mechanism is predominantly adiabatic; the addition of subsequent graphene layers increases the contact potential, producing an increase in the effective barrier to ET at the electrode/electrolyte interface.

Tunable Optical Transition in 2H-MoS2 via Direct Electrochemical Engineering of Vacancy Defects and Surface S-C Bonds

Although surface engineering has been regarded to be a great approach to modulate the optical and electrical properties of nanomaterials, the spontaneous covalent functionalization on semiconducting 2H-MoS₂ is a notoriously difficult process, while several reactions have been performed on metallic 1T-MoS₂. This limitation in functionalization is attributed to the difficulty of electron transfer from 2H-TMD to the reacting molecules due to its semiconducting property and neutral charge state. Unfortunately, this is an all too important prerequisite step toward creating chemically reactive radical species for surface functionalization reactions. Herein, an electrochemical approach was developed for facilitating direct surface functionalization of 2H-MoS₂ with 4-bromobenzene diazonium tetraborate (4-BBDT). Successful functionalization was characterized using various microscopic and spectroscopic analyses. During the course of investigating the change of optical transition seen for modified 2H-MoS₂ using photoluminescence measurement combined with theoretical calculations, our study uncovered that the controlling S-C bond and sulfur vacancy generation could tune the electronic structure of functionalized 2H-MoS₂.

Versatile construction of van der Waals heterostructures using a dual-function polymeric film

The proliferation of van der Waals (vdW) heterostructures formed by stacking layered materials can accelerate scientific and technological advances. Here, we report a strategy for constructing vdW heterostructures through the interface engineering of the exfoliation substrate using a sub-5 nm polymeric film. Our construction method has two main features that distinguish it from existing techniques. First is the consistency of its exfoliation process in increasing the yield and in producing large (>10,000 μm²) monolayer graphene. Second is the applicability of its layer transfer process to different layered materials without requiring a specialized stamp—a feature useful for generalizing the assembly process. We demonstrate vdW graphene devices with peak carrier mobility of 200,000 and 800,000 cm² V⁻¹ s⁻¹ at room temperature and 9 K, respectively. The simplicity of our construction method and its versatility to different layered materials may open doors for automating the fabrication process of vdW heterostructures.

Heterostructure stacking of 2D materials is crucial for fundamental studies and device applications. Here, the authors report heterostructures based on exfoliated flakes of graphene with large lateral area sizes and record high mobility of 200,000 cm2/Vs at room temperature.