Using Smartphone APP To Determine the CN- Concentration Quantitatively in Tap Water: Synthesis of the Naked-Eye Colorimetric Chemosensor for CN- and Ni2+ Based on Benzothiazole

Fast and easy detection of hypochlorite by a smartphone-based fluorescent turn-on probe: Applications to water samples, zebrafish and plant imaging

We have developed a fluorescent probe DBT-Cl ((E)-2-(2-(4-(diphenylamino)benzylidene) hydrazinyl)-N,N,N-trimethyl-2-oxoethan-1-aminium chloride) for ClO- with an aggregation-induced emission (AIE) strategy depending on solvent polarity. DBT-Cl possessed a prominent solvatochromic emission property with intramolecular charge transfer (ICT) from the TPA (triphenylamine) to the amide group, which was studied by spectroscopic analysis and DFT calculations. These unique AIE properties of DBT-Cl led to the recognition of ClO- with high fluorescent selectivity. DBT-Cl quickly detected ClO- in less than 1 sec with a fluorescent color change from green to cyan. DBT-Cl had a low detection limit of 9.67 μM to ClO-. Detection mechanism of DBT-Cl toward ClO- was illustrated to be oxidative cleavage of DBT-Cl by 1H NMR titrations, ESI-mass, and DFT calculations. We established the viability for dependable detection of ClO- in actual water samples, as well as zebrafish and plant imaging. In particular, DBT-Cl was capable of easily monitoring ClO- through a smartphone application. Therefore, DBT-Cl assured a promising approach for a fast-responsive and multi-applicable ClO- probe in environmental and living organism systems.

A Novel Rhodamine-Phenolphthalein Architecture for Selective Mercury Ion Detection in Aqueous Media

In this study, the primary objective is to synthesize a novel fluorescent Rh-PP-Rh compound and explore its extensive range of photochemical behaviors. Initially, the synthesis of the novel Rh-PP-Rh was carried out for this purpose. Subsequently, UV-Vis and fluorescence spectroscopy were employed to investigate the interactions between Rh-PP-Rh and a diverse array of ions in aqueous solvent systems. Through fluorescence and UV-Vis studies, it was observed that Rh-PP-Rh demonstrated turn-on sensor properties in the presence of Hg2+ ions. Furthermore, the limits of detection (LOD) and association constant (Ka) values for Rh-PP-Rh/Hg2+ were determined as 334 nM and 9.13×1011 M-2, respectively. Additionally, the reversible studies demonstrated a switchable on/off response upon alternate addition of HgCl2 and [Bu4N]F to Rh-PP-Rh. These findings suggest that the probe Rh-PP-Rh also possesses specific sensor properties for F- ions in the presence of mercury. In addition, the investigation encompassed an assessment of the visual analysis of the color alterations of Rh-PP-Rh both on filter paper and in an EtOH/H2O solution. The findings demonstrated that Rh-PP-Rh can be successfully utilized in solutions containing mercury, as it generates significant color transformations.

Synthesis and Computational Study of an Optical Fluorescent Sensor for Selective Detection of Ni2+ Ions

The presence of an abnormal amount of Ni2+ in the human body causes various health issues. Therefore, this work aimed to synthesize the curcumin-based fluorescence-on sensor P [2,6-bis((E)-4-chlorobenzylidene)-cyclohexan-1-one] that was capable of selectively responding to Ni2+ ions in aqueous solution. The structure of P was confirmed by 1H NMR and Fourier transform infrared (FTIR) spectroscopy. The Ni2+ ion sensing was based on the fluorescence enhancement of the fluorophore (P) in neutral aqueous medium. The response of the P-based sensor was highly selective toward Ni2+ ions, whereas the possible interferences from other metal cations were negligible. P had a fast response; it was selective and had a sensitive detection limit (LOD = 2 × 10-10 M) toward Ni2+ ions in neutral medium with a high association constant (K) value of 3.6 × 105 M-2 for the complex formation between the P and Ni2+ ions. Job's plot and DFT calculations proved that the binding stoichiometry of P for Ni2+ was 2:1. P was recovered using EDTA as a chelating agent after being employed as a fluorescent sensor. These characteristics ensured the potential use of P as a new class of chemosensor for environmental applications.

Chalcone-Based Colorimetric Chemosensor for Detecting Ni2+

The first chalcone-based colorimetric chemosensor DPP (sodium (E)-2,4-dichloro-6-(3-oxo-3-(pyridine-2-yl)prop-1-en-1-yl)phenolate) was synthesized for detecting Ni2+ in near-perfect water. The synthesis of DPP was validated by using 1H, 13C NMR and ESI-MS. DPP selectively sensed Ni2+ through the color variation from yellow to purple. Detection limit of DPP for Ni2+ was calculated to be 0.36 μM (3σ/slope), which is below the standard (1.2 μM) set by the United States Environmental Protection Agency (EPA).The binding ratio of DPP to Ni2+ was determined as a 1:1 by using a Job plot and ESI-mass. The association constant of DPP and Ni2+ was calculated as 1.06 × 104 M−1 by the non-linear fitting analysis. In real samples, the sensing application of DPP for Ni2+ was successfully performed. DPP-coated paper-supported strips could also be used for detecting Ni2+. The binding mechanism of DPP to Ni2+ was proposed by ESI-MS, Job plot, UV-vis, FT-IR spectroscopy, and DFT calculations.

Development of a Screening Method for Sulfamethoxazole in Environmental Water by Digital Colorimetry Using a Mobile Device

Antibiotic resistance is a major health concern of the 21st century. The misuse of antibiotics over the years has led to their increasing presence in the environment, particularly in water resources, which can exacerbate the transmission of resistance genes and facilitate the emergence of resistant microorganisms. The objective of the present work is to develop a chemosensor for screening of sulfonamides in environmental waters, targeting sulfamethoxazole as the model analyte. The methodology was based on the retention of sulfamethoxazole in disks containing polystyrene divinylbenzene sulfonated sorbent particles and reaction with p-dimethylaminocinnamaldehyde, followed by colorimetric detection using a computer-vision algorithm. Several color spaces (RGB, HSV and CIELAB) were evaluated, with the coordinate a_star, from the CIELAB color space, providing the highest sensitivity. Moreover, in order to avoid possible errors due to variations in illumination, a color palette is included in the picture of the analytical disk, and a correction using the a_star value from one of the color patches is proposed. The methodology presented recoveries of 82–101% at 0.1 µg and 0.5 µg of sulfamethoxazole (25 mL), providing a detection limit of 0.08 µg and a quantification limit of 0.26 µg. As a proof of concept, application to in-field analysis was successfully implemented.

Rhodanine-based fluorometric sequential monitoring of silver (I) and iodide ions: Experiment, DFT calculation and multifarious applications

A simple rhodanine derived fluorophoric unit has been designed for selective detection of Ag⁺ and I^- ions in DMSO-H₂O medium. The sensor R1 showed an obvious "turn-on" fluorescence response toward Ag⁺ due to the inhibition of both C-N single bond free rotation, internal charge transfer (ICT) and the formation of chelation enhanced fluorescence (CHEF) effects. The fluorescence quantum yield (Φ) was increased from 0.0013 to 0.032 for receptor R1 upon the Ag⁺-complexation. In addition, the 1:1 complexing stoichiometry was employed based on Job's plot analysis with detection limit of 24.23 × 10^-7 M. Conversely, receptor R1+Ag⁺ particularly detects I^- ion over other co-existing anions by the "turn-off" fluorescence response due to the formation of AgI, displacing the receptor R1 with the quantum yield of 0.0014. The detection limit was calculated to be 22.83 × 10^-7 M. The sensing behaviour of receptor R1 toward Ag⁺ was also supported by density functional theory (DFT) calculations. Moreover, the sensing ability of reported receptor R1 could be exercised in multifarious applications like paper strip, silica-supported analysis, staining test for latent finger print, logical behaviour, smartphone-assisted quantitative detection and real water samples studies.

Rapid detection of mercury (II) ions and water content by a new rhodamine B-based fluorescent chemosensor

A rhodamine B-based sensor (RS) was designed and synthesized by a combination of the spirolacton rhodamine B (fluorophore) and multidentate chelates (ionophore) with high affinity towards Hg²⁺. In the presence of Hg²⁺, the resulting red-orange fluorescence (under UV light) and naked eye red color of RS are supposed to be used for quantitative and qualitative measurement of Hg²⁺. Further fluorescent titration and analysis demonstrate that RS can selectively detect Hg²⁺ within 1 s with a low limit of detection (LOD) of 16 nM in acetonitrile media, meanwhile, the association constant (K_a) was calculated to be 0.32 × 10⁵ M^-1. More importantly, the resultant complex (RSHg) of RS and Hg²⁺ has also been successfully applied to detect limited water content in acetonitrile solution.