Combating Essential Metal Toxicity: Key Information from Optical Spectroscopy

Evaluation of essential and trace metals/metalloids distribution and probable human health risk implications from branded liquid and powder milks available in Dhaka City, Bangladesh

The processed forms of milk, branded liquid, and power milk available in Dhaka city, the capital of Bangladesh, were investigated for essential and trace metal/metalloids regarding nutritional and human health risk aspects. For this, the potential nutritional contribution, estimated daily intake (EDI) and non-carcinogenic risk for six different life stages with male and female categories, as well as the carcinogenic risk for children and adults of both genders, were addressed. In total, 46 branded liquid and powder milk samples were considered for this analysis employing atomic absorption spectroscopy. The concentration of essential elements showed the trends of K > Ca > Na > Mg > Fe > Zn > Mn > Cu and K > Ca > Na > Mg > Fe > Cu > Mn > Zn for liquid and powder milk samples, respectively, but the potentially hazardous one showed the same trends (Cr > Pb > Hg > As > Cd) for both items. Except for Cr, Hg, and Fe, the elemental compositions of both milk categories differed considerably (< 0.05). Compared to the threshold values for milk samples (liquid and powder), Fe (19% and 27%), Mn (100% and 63%), Cu (0% and 23%), Zn (94% and 0%), Pb (25% and 13%), and Cr (0% and 3%) showed above the permissible limits. The nutrient input was the highest for Ca (27.2% and 18.7%), followed by Mg, K, and Na. The EDI of studied elements was within the daily permissible limit in both the milk category (except age group (≤ 3) and the female category). The non-carcinogenic risk assessment showed that the age groups ≤ 3 for liquid milk and ≤ 3 and 3 < X ≤ 14 with female categories for powder milk exceeded the threshold level (> 1) in the case of Cr, Cd, As, Zn, and Mn. The probable carcinogenic risks indicated an unacceptable risk level (< 1.00E-04) for the ingestion of Cr through powder milk samples for children in male and female categories. Finally, it believes that green cow farming practices and green milk processing technology, as well as continuous monitoring of toxic metals, can limit the ultimate risk worldwide.

Oil soluble iron: Curcumin derivatives and their complex

Curcumin dibutanoate (CUDB) is a new oil soluble bidentate ligand which shows higher stability against heat and oxidation compared to curcumin. The oil solubility of this ligand increased an order of magnitude over curcumin. This biomolecule showed high digestibility in a simulated intestinal trial and was hydrolyzed in the presence of porcine pancreatin releasing ∼ 91% of the curcumin. When curcumin dibutanoate was complexed with Fe2+, Fe(CUDB)2 was formed as a new iron (II) complex. Due to the high hydrophobicity of the curcumin dibutanoate ligand, the solubility of Fe(CUDB)2 was found to be 2.8 mg/mL in canola oil. The steric hindrance afforded by the CUDB ligand, coupled with its hydrophobicity stabilized the iron (II) oxidation state within the complex compared to FeSO4·7H2O as measured by 2,2-diphenyl-1-picrylhydrazyl (DPPH) radical. Fe(CUDB)2 has potential to be a new form of oil-soluble iron supplement which co-delivers iron (II) and curcumin.

Recent advances in the antioxidant activity of metal-curcumin complexes: a combined computational and experimental review

Curcumin, an extensively studied phytochemical compound, has gained attention for its potential therapeutic applications across a spectrum of diseases. Its notable attributes include its relatively high tolerability within the human body and its perceived absence of adverse side effects. This review article presents a comprehensive overview of the antioxidant effects exhibited by complexes formed by curcumin and curcumin derived ligands with metals like Mn, Cu, Fe, Zn, Ga and In, which leads to toxic effects beyond a certain limit, based on both experimental and theoretical findings. Additionally, the discussion delves into metal-curcumin complexes characterized by stoichiometries of 1:1 and 1:2, exploring their geometric arrangements and corresponding antioxidant activity, as highlighted in recent studies. These complexes hold the promise of improving curcumin's solubility, stability, and bioavailability, potentially augmenting its overall therapeutic potential and expanding its scope for medical applications.

Synthesis of a light-responsive platinum curcumin complex, chemical and biological investigations and delivery to tumor cells by means of polymeric nanoparticles

Platinum-based anticancer drugs are common in chemotherapy, but problems such as systemic toxicity and acquired resistance of some tumors hamper their clinical applications and therapeutic efficacy. It is necessary to synthesize Pt-based drugs and explore strategies to reduce side effects and improve pharmacokinetic profiles. Photo-responsive chemotherapeutics have emerged as an alternative strategy against several cancers, as photoactivation offers spatial selectivity and fewer side effects. Here, we combine chemical synthesis and nanotechnology to create a multifunctional platinum drug delivery system based on the novel metal complex [Pt(ppy)(curc)] (ppy = deprotonated 2-phenylpyridine, curc = deprotonated curcumin)] embodying the naturally occurring bioactive molecule, curcumin. The ultrasonication method coupled with the layer-by-layer technology was employed to produce nanocolloids, which demonstrated a good biocompatibility, higher solubility in aqueous solution, stability, large drug loading, and good biological activity in comparison with the free drug. In vitro release experiments revealed that the polymeric nanoformulation is relatively stable under physiological conditions (pH = 7.4 and 37 °C) but sensitive to acidic environments (pH = 5.6 and 37 °C) which would trigger the release of the loaded drug. Our approach modifies the bioavailability of this Pt-based drug increasing its therapeutic action in terms of both cytotoxic and anti-metastasis effects.

Probiotic cultures as a potential protective strategy against the toxicity of environmentally relevant chemicals: State-of-the-art knowledge

Environmentally relevant toxic substances may affect human health, provoking numerous harmful effects on central nervous, respiratory, cardiovascular, endocrine and reproductive system, and even cause various types of carcinoma. These substances, to which general population is constantly and simultaneously exposed, enter human body via food and water, but also by inhalation and dermal contact, while accumulating evidence suggests that probiotic cultures are able to efficiently adsorb and/or degrade them. Cell wall of probiotic bacteria/fungi, which contains structures such as exopolysaccharide, teichoic acid, protein and peptidoglycan components, is considered the main place of toxic substances adsorption. Moreover, probiotics are able to induce metabolism and degradation of various toxic substances, making them less toxic and more suitable for elimination. Other probable in vivo protective effects have also been suggested, including decreased intestinal absorption and increased excretion of toxic substances, prevented gut microbial dysbiosis, increase in the intestinal mucus secretion, decreased production of reactive oxygen species, reduction of inflammation, etc. Having all of this in mind, this review aims to summarize the state-of-the-art knowledge regarding the potential protective effects of different probiotic strains against environmentally relevant toxic substances (mycotoxins, polycyclic aromatic hydrocarbons, pesticides, perfluoroalkyl and polyfluoroalkyl substances, phthalates, bisphenol A and toxic metals).

Investigation of antioxidant, anti-ulcer, and analgesic potential of a metal-curcumin complex

The goal of the current study was to investigate the antioxidant, anti-ulcer, and analgesic properties of a metal-curcumin complex (MCC) utilizing different mouse and rat models. The antioxidant component of the analysis was completed in vitro, whereas the other activities were completed in vivo. The 2,2'-azino-bis(3-ethylbenzothiazoline-6-sulfonic acid (ABTS) radical cation scavenging test, the ferric-reducing antioxidant power (FRAP) assay, and the 2,2-diphenyl-1-picryl-hydrazyl-hydrate (DPPH) free radical scavenging assay were used to measure the antioxidant activity. MCC demonstrated potent radical scavenging abilities. In all three experiments, Trolox served as the reference substance. When curcumin's radical scavenging abilities were compared, it became clear that MCC was a superior radical scavenger. Using the ethanol-induced technique on Sprague-Dawley rats, the anti-ulcerogenic effect was assessed. It shows that at an oral dosage of 100 mg/kg body weight, MCC might provide gastroprotection (b.w.). Additionally, we have examined MCC's potential as an analgesic. Swiss albino mice were used to measure the analgesic activity of MCC using the hot plate technique. At an oral dosage of 50 mg/kg b.w., MCC displayed analgesic efficacy. As a result, MCC could be useful in the management of inflammatory diseases.

Synthesis, crystal structure and Hirshfeld surface analysis of catena-poly[[bis(semicarbazide-κ2 N,O)copper(II)]-μ-sulfato-κ2 O:O′]

The title polymer, [Cu(SO4)(CH5N3O)2] n , has been synthesized from aqueous solutions of CuSO4 and semicarbazide. In the crystal structure, the CuII atoms are chelated by two neutral semicarbazide molecules through the oxygen atom and a nitrogen atom of the amino group. The remaining two positions of the Jahn–Teller-distorted octahedral coordination sphere are occupied by oxygen atoms of two sulfate anions in the axial positions. The coordination bonds of the latter associate the polyhedra into polymeric chains running parallel to the c axis. There is a weak intramolecular hydrogen bond between the N—H group and an oxygen atom of the SO4 2– anion. Thirteen relatively weak intermolecular hydrogen-bonding interactions link the chains into a three-dimensional network. Hirshfeld surface analysis revealed that 64.7% of the intermolecular interactions are from O...H/H...O contacts and 20.1% from H...H contacts. Other interactions such as N...H/H...N or C...H/H...C contribute less to the crystal packing.

Exposures and Health Risks Associated with Elements in Diets from a Gold Mining Area

There has been a concern of metal contamination from the mining areas which could expose the population to toxic metal through consumption of food products in the regions. Therefore, the study was conducted to analyze 18 elements using X-ray fluorescence analyzer and to assess for metal exposure through dietary intakes. Dietary recall survey instrument was used to collect consumption, demographic, and anthropometric data from 308 consumers in life-stage groups: toddlers, adolescents, and adults. Cassava, maize, rice, tomato, and yam indigenous diet samples (66) from the gold mining regions of Ghana were obtained by purposively sampling from street vendors. Principal component analysis was used to apportion pollution source. Health risks due to dietary elements were quantified using US EPA probabilistic protocols for cancer and non-cancer disease endpoints. Deficiency and overage risks of essential elements were tested against reference nutrient intakes. The element-diet-location mode of principal component analysis separated cassava and maize diets as significant vehicles for both essential and toxic elements apportioned to mining pollution source. The chronic daily intake trend revealed a preponderance for arsenic (maize: toddlers 0.009, adolescents 0.025 adults 0.010 mg/kg^-d) and lead (maize: toddlers 0.009, adolescents 0.026, adults 0.010 mg/kg^-d) exposure through maize diets compared to cassava diets. The hazard quotient showed (HQ > 1) life-stage risk differentiation for barium, although there were cumulative and pervasive health risks for all age groups based on the hazard index (Ag, Ba, Cd, Co, Hg, Mn, Mo, Sb, Sn, Sr, U, V, W, and Zr). The likely cancer risk (mode) for all life-stage groups (3 × 10^-6-1 × 10^-2) were also high in that they exceeded the 1 × 10^-6 safety threshold. The modal margin of exposure (MoE < 1) alerted high public health concern due to lead-induced toxicities among all life-stage groups through all diet vehicles. Regarding nutritional adequacy, there were possible overage risks associated with selenium, including deficiency risks for calcium, potassium, and zinc for all life-stage groups. Toddlers and adolescents were susceptible to iron deficiency risks through cassava diets and iron overage risks through maize diets.

Cellulose-reinforced poly(ethylene-co-vinyl acetate)-supported Ag nanoparticles with excellent catalytic properties: synthesis of thioamides using the Willgerodt–Kindler reaction

Cellulose, a bio-derived polymer, is widely used in food packaging, dye removal, coatings, and solid-supported catalysis. Heterogeneous catalysts play a critical role in environmental remediation. In this context, the demand for green and cost-effective catalysts has rapidly increased. In this study, cellulose was extracted from rice straw, and a highly active solid-supported catalytic model was developed. First, cellulose was conjugated with poly(ethylene-co-vinyl acetate) (PEVA), and then Ag nanoparticles (AgNPs) were inserted into the cellulose–PEVA composite. The process involved the reduction of AgNPs in the presence of sodium borohydride. The fabricated hybrid catalyst was characterized using Fourier-transform infrared spectroscopy, scanning electron microscopy, energy dispersive X-ray, and powder X-ray diffraction. Thereafter, the obtained hybrid was used as a catalyst for the Willgerodt–Kindler reaction of aromatic aldehydes, amines, and S₈ to synthesize thioamides with excellent yields. The developed catalytic system exhibited high stability and recyclability. Moreover, the mechanical properties of the hybrid catalyst were evaluated using tensile strength and impact tests. RGB analysis of digital images was also performed to investigate the primary components of the catalyst.

The AgNPs@cellulose–PEVA hybrid catalyst presented excellent catalytic efficacy for the Willgerodt–Kindler reaction, facilitating the selective formation of C Created by potrace 1.16, written by Peter Selinger 2001-2019 ]]> S bonds.

Nanomedicine Targets Iron Metabolism for Cancer Therapy

Iron is an essential element for cell proliferation and homeostasis by engaging in cell metabolism including DNA synthesis, cell cycle, and redox cycling; however, iron overload could contribute to tumor initiation, proliferation, metastasis, and angiogenesis. Therefore, manipulating iron metabolisms, such as using iron chelators, transferrin receptor 1 (TFR1) Abs, and cytotoxic ligands conjugated to transferrin, has become a considerable strategy for cancer therapy. However, there remain major limitations for potential translation to the clinic based on the regulation of iron metabolism in cancer treatment. Nanotechnology has made great advances for cancer treatment by improving the therapeutic potential and lowering the side‐effects of the proved drugs and those under various stages of development. Early studies that combined nanotechnology with therapeutic means for the regulation of iron metabolism have shown certain promise for developing specific treatment options based on the intervention of cancer iron acquisition, transportation, and utilization. In this review, we summarize the current understanding of iron metabolism involved in cancer and review the recent advances in iron‐regulatory nanotherapeutics for improved cancer therapy. We also envision the future development of nanotherapeutics for improved treatment for certain types of cancers.

Dual Sensitization via Electron and Energy Harvesting in a Nanohybrid for Improvement of Therapeutic Efficacy

We demonstrate experimental evidence of the effect of surface plasmon resonance of noble metal nanoparticles (NPs) on the activity of a well-known biomedicinal drug in the proximity of a semiconductor having a wide band gap for enhanced photodynamic therapy (PDT) efficacy. We have chosen riboflavin (Rf) (or vitamin B₂) as a model photosensitizer, attached with ZnO NPs and further attached with gold (Au) NP-decorated ZnO to increase the efficiency. The synthesized nanohybrids are characterized with the help of different microscopic, optical spectroscopic, and density functional theory (DFT)-based techniques. The DFT and time-dependent DFT-based calculations validate the experimental findings. A detailed ultrafast spectroscopic study has been carried out further to study the excited-state charge dynamics in the interface of the nanohybrids. The occurrence of a Förster resonance energy transfer (FRET) between Rf and Au has been found to be the key reason for the increased efficiency in the Rf-ZnO-Au nanohybrid over the Rf-ZnO one. The dipolar coupling between Au and Rf in the Rf-ZnO-Au nanohybrid further facilitates the generation of reactive oxygen species (ROS) in comparison to Rf-ZnO under blue-light irradiation. The greater efficiency in ROS generation by the Rf-ZnO-Au nanohybrid has been utilized for antimicrobial action against methicillin-resistant S. aureus (MRSA). Overall, the present study highlights the dual sensitization for achieving enhanced electron injection efficiency in the Rf-ZnO-Au nanohybrid in order to use it as an antibacterial agent that could be translated in PDT.

Metal-Curcumin Complexes in Therapeutics: An Approach to Enhance Pharmacological Effects of Curcumin

Curcumin, an active component of the rhizome turmeric, has gained much attention as a plant-based compound with pleiotropic pharmacological properties. It possesses anti-inflammatory, antioxidant, hypoglycemic, antimicrobial, neuroprotective, and immunomodulatory activities. However, the health-promoting utility of curcumin is constrained due to its hydrophobic nature, water insolubility, poor bioavailability, rapid metabolism, and systemic elimination. Therefore, an innovative stride was taken, and complexes of metals with curcumin have been synthesized. Curcumin usually reacts with metals through the β-diketone moiety to generate metal–curcumin complexes. It is well established that curcumin strongly chelates several metal ions, including boron, cobalt, copper, gallium, gadolinium, gold, lanthanum, manganese, nickel, iron, palladium, platinum, ruthenium, silver, vanadium, and zinc. In this review, the pharmacological, chemopreventive, and therapeutic activities of metal–curcumin complexes are discussed. Metal–curcumin complexes increase the solubility, cellular uptake, and bioavailability and improve the antioxidant, anti-inflammatory, antimicrobial, and antiviral effects of curcumin. Metal–curcumin complexes have also demonstrated efficacy against various chronic diseases, including cancer, arthritis, osteoporosis, and neurological disorders such as Alzheimer’s disease. These biological activities of metal–curcumin complexes were associated with the modulation of inflammatory mediators, transcription factors, protein kinases, antiapoptotic proteins, lipid peroxidation, and antioxidant enzymes. In addition, metal–curcumin complexes have shown usefulness in biological imaging and radioimaging. The future use of metal–curcumin complexes may represent a new approach in the prevention and treatment of chronic diseases.

Nano-MOFs as targeted drug delivery agents to combat antibiotic-resistant bacterial infections

The drug resistance of bacteria is a significant threat to human civilization while the action of antibiotics against drug-resistant bacteria is severely limited owing to the hydrophobic nature of drug molecules, which unquestionably inhibit its permanency for clinical applications. The antibacterial action of nanomaterials offers major modalities to combat drug resistance of bacteria. The current work reports the use of nano-metal-organic frameworks encapsulating drug molecules to enhance its antibacterial activity against model drug-resistant bacteria and biofilm of the bacteria. We have attached rifampicin (RF), a well-documented antituberculosis drug with tremendous pharmacological significance, into the pore surface of zeolitic imidazolate framework 8 (ZIF8) by a simple synthetic procedure. The synthesized ZIF8 has been characterized using the X-ray diffraction (XRD) method before and after drug encapsulation. The electron microscopic strategies such as scanning electron microscope and transmission electron microscope methods were performed to characterize the binding between ZIF8 and RF. We have also performed picosecond-resolved fluorescence spectroscopy to validate the formation of the ZIF8-RF nanohybrids (NHs). The drug release profile experiment demonstrates that ZIF8-RF depicts pH-responsive drug delivery and is ideal for targeting bacterial disease corresponding to its inherent acidic nature. Most remarkably, ZIF8-RF gives enhanced antibacterial activity against methicillin-resistant Staphylococcus aureus bacteria and also prompts entire damage of structurally robust bacterial biofilms. Overall, the present study depicts a detailed physical insight for manufactured antibiotic-encapsulated NHs presenting tremendous antimicrobial activity that can be beneficial for manifold practical applications.

Wide bandgap semiconductor-based novel nanohybrid for potential antibacterial activity: ultrafast spectroscopy and computational studies

The properties of nanomaterials generated by external stimuli are considered an innovative and promising replacement for the annihilation of bacterial infectious diseases. The present study demonstrates the possibility of getting the antibiotic-like drug action from our newly synthesized nanohybrid (NH), which consists of norfloxacin (NF) as the photosensitive material covalently attached to the ZnO nanoparticle (NP). The synthesized NH has been characterized using various microscopic and spectroscopic techniques. Steady state fluorescence and time-correlated single photon counting (TCSPC)-based spectroscopic studies demonstrate the efficient electron transfer from NF to ZnO. This enhances the reactive oxygen species (ROS) production capability of the system. First principles density functional theory has been calculated to gain insight into the charge separation mechanism. To explore the electron densities of the occupied and unoccupied levels of NH, we have verified the nature of the electronic structure. It is observed that there is a very high possibility of electron transfer from NF to ZnO in the NH system, which validates the experimental findings. Finally, the efficacy of NH compared to NF and ZnO has been estimated on the in vitro culture of E. coli bacteria. We have obtained a significant reduction in the bacterial viability by NH with respect to control in the presence of light. These results suggest that the synthesized NH could be a potential candidate in the new generation alternative antibacterial drugs. Overall, the study depicts a detailed physical insight for nanohybrid systems that can be beneficial for manifold application purposes.