1
|
Chen X, Liu Y, Jiang Y, Feng S. Radon transport carried by geogas: prediction model. ENVIRONMENTAL SCIENCE AND POLLUTION RESEARCH INTERNATIONAL 2023; 30:86656-86675. [PMID: 37436618 DOI: 10.1007/s11356-023-28616-4] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Grants] [Track Full Text] [Subscribe] [Scholar Register] [Received: 06/07/2022] [Accepted: 07/01/2023] [Indexed: 07/13/2023]
Abstract
This paper provides an overview and information on radon migration in the crust. In the past several decades, numerous studies on radon migration have been published. However, there is no there is no comprehensive review of large-scale radon transport in the earth crust. A literature review was conducted to present the research on the mechanism of radon migration, geogas theory, investigation of multiphase flow, and modeling method of fractures. Molecular diffusion was long considered the primary mechanism for radon migration in the crust. However, a molecular diffusion mechanism cannot explain the understanding of anomalous radon concentrations. In contrast with early views, the process of radon migration and redistribution within the Earth may be determined by geogas (mainly CO2 and CH4). Microbubbles rising in fractured rocks may be a rapid and efficient way of radon migration, as reported by recent studies. All these hypotheses on the mechanisms of geogas migration are summarized into a theoretical framework, defined as "geogas theory." According to geogas theory, fractures are the principal channel of gas migration. The development of the discrete fracture network (DFN) method is expected to supply a new tool for fracture modeling. It is hoped that this paper will contribute to a deeper understanding of radon migration and fracture modeling.
Collapse
Affiliation(s)
- Xiaojie Chen
- School of Resource Environment and Safety Engineering, University of South China, Hengyang, 421001, Hunan, China
- Safety Technology Center, University of South China, Hengyang, 421001, Hunan, China
| | - Yong Liu
- College of Physics and Optoelectronic Engineering, Shenzhen University, Shenzhen, 518060, China
| | - Yourui Jiang
- School of Resource Environment and Safety Engineering, University of South China, Hengyang, 421001, Hunan, China
| | - Shengyang Feng
- School of Resource Environment and Safety Engineering, University of South China, Hengyang, 421001, Hunan, China.
| |
Collapse
|
2
|
Yuan S, Ajam H, Sinnah ZAB, Altalbawy FMA, Abdul Ameer SA, Husain A, Al Mashhadani ZI, Alkhayyat A, Alsalamy A, Zubaid RA, Cao Y. The roles of artificial intelligence techniques for increasing the prediction performance of important parameters and their optimization in membrane processes: A systematic review. ECOTOXICOLOGY AND ENVIRONMENTAL SAFETY 2023; 260:115066. [PMID: 37262969 DOI: 10.1016/j.ecoenv.2023.115066] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Subscribe] [Scholar Register] [Received: 03/27/2023] [Revised: 05/13/2023] [Accepted: 05/22/2023] [Indexed: 06/03/2023]
Abstract
Membrane-based separation processes has been recently of significant global interest compared to other conventional separation approaches due to possessing undeniable advantages like superior performance, environmentally-benign nature and simplicity of application. Computational simulation of fluids has shown its undeniable role in modeling and simulation of numerous physical/chemical phenomena including chemical engineering, chemical reaction, aerodynamics, drug delivery and plasma physics. Definition of fluids can be occurred using the Navier-Stokes equations, but solving the equations remains an important challenge. In membrane-based separation processes, true perception of fluid's manner through disparate membrane modules is an important concern, which has been significantly limited applying numerical/computational procedures such s computational fluid dynamics (CFD). Despite this noteworthy advantage, the optimization of membrane processes using CFD is time-consuming and expensive. Therefore, combination of artificial intelligence (AI) and CFD can result in the creation of a promising hybrid model to accurately predict the model results and appropriately optimize membrane processes and phase separation. This paper aims to provide a comprehensive overview about the advantages of commonly-employed ML-based techniques in combination with the CFD to intelligently increase the optimization accuracy and predict mass transfer and the unfavorable events (i.e., fouling) in various membrane processes. To reach this objective, four principal strategies of AI including SL, USL, SSL and ANN were explained and their advantages/disadvantages were discussed. Then after, prevalent ML-based algorithm for membrane-based separation processes. Finally, the application potential of AI techniques in different membrane processes (i.e., fouling control, desalination and wastewater treatment) were presented.
Collapse
Affiliation(s)
- Shuai Yuan
- Information Engineering College, Yantai Institute of Technology, Yantai, Shandong 264005, China.
| | - Hussein Ajam
- Department of Intelligent Medical Systems, Al Mustaqbal University College, Babylon 51001, Iraq
| | - Zainab Ali Bu Sinnah
- Mathematics Department, University Colleges at Nairiyah, University of Hafr Al Batin, Saudi Arabia
| | - Farag M A Altalbawy
- National Institute of Laser Enhanced Sciences (NILES), University of Cairo, Giza 12613, Egypt; Department of Chemistry, University College of Duba, University of Tabuk, Tabuk, Saudi Arabia
| | | | - Ahmed Husain
- Department of Medical Instrumentation, Al-farahidi University, Baghdad, Iraq
| | | | - Ahmed Alkhayyat
- Scientific Research Centre of the Islamic University, The Islamic University, Najaf, Iraq
| | - Ali Alsalamy
- College of Technical Engineering, Imam Ja'afar Al-Sadiq University, Al-Muthanna 66002, Iraq
| | | | - Yan Cao
- School of Computer Science and Engineering, Xi'an Technological University, Xi'an 710021, China
| |
Collapse
|
3
|
Cao Y, Taghvaie Nakhjiri A, Sarkar S. Modelling and simulation of waste tire pyrolysis process for recovery of energy and production of valuable chemicals (BTEX). Sci Rep 2023; 13:6090. [PMID: 37055516 PMCID: PMC10102020 DOI: 10.1038/s41598-023-33336-3] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 12/15/2022] [Accepted: 04/11/2023] [Indexed: 04/15/2023] Open
Abstract
The pyrolysis oil fraction is highly attractive for pyrolysis products. A simulated flowsheet model of a waste tire pyrolysis process is presented in this paper. A kinetic rate-based reaction model and equilibrium separation model are created in the Aspen Plus simulation package. The simulation model is effectively proven against experimental data of literature at temperatures of 400, 450, 500, 600 and 700 °C. Also, the developed model was employed to investigate the impact of temperature on the pyrolysis procedure and demonstrated that there is an optimum temperature for chain fractions. The optimum temperature to have the highest amount of limonene (as a precious chemical product of waste tire pyrolysis process) was found 500 °C. The findings indicated that the pyrolysis process is ecologically benign, although there is still space for development. In addition, a sensitivity analysis was carried out to see how altering the heating fuel in the process would affect the non-condensable gases produced in the process. Reactors and distillation columns in the Aspen Plus® simulation model was developed to assess the technical functioning of the process (e.g., upgrading the waste tires into limonene). Furthermore, this work focuses on the optimization of the operating and structure parameters of the distillation columns in the product separation unit. The PR-BM, as well as NRTL property models, were applied in the simulation model. The calculation of non-conventional components in the model was determined using HCOALGEN and DCOALIGT property models.
Collapse
Affiliation(s)
- Yan Cao
- School of Computer Science and Engineering, Xi'an Technological University, Xi'an, 710021, China
| | - Ali Taghvaie Nakhjiri
- Department of Petroleum and Chemical Engineering, Science and Research Branch, Islamic Azad University, Tehran, Iran.
| | - Shahin Sarkar
- Department of Applied Science, Technological University of the Shannon, Midlands Midwest, Moylish, Limerick, V94 EC5T, Ireland
| |
Collapse
|
4
|
Chen Y, Abed AM, Faisal Raheem AB, Altamimi AS, Yasin Y, Abdi Sheekhoo W, Fadhil Smaisim G, Ali Ghabra A, Ahmed Naseer N. Current advancements towards the use of nanofluids in the reduction of CO2 emission to the atmosphere. J Mol Liq 2023. [DOI: 10.1016/j.molliq.2022.121077] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 12/23/2022]
|
5
|
Cao Y, Taghvaie Nakhjiri A, Ghadiri M. Computational fluid dynamics comparison of prevalent liquid absorbents for the separation of SO 2 acidic pollutant inside a membrane contactor. Sci Rep 2023; 13:1300. [PMID: 36693929 PMCID: PMC9873644 DOI: 10.1038/s41598-023-28580-6] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Figures] [Journal Information] [Subscribe] [Scholar Register] [Received: 08/27/2022] [Accepted: 01/20/2023] [Indexed: 01/25/2023] Open
Abstract
In recent years, the emission of detrimental acidic pollutants to the atmosphere has raised the concerns of scientists. Sulphur dioxide (SO2) is a harmful greenhouse gas, which its abnormal release to the atmosphere may cause far-ranging environmental and health effects like acid rain and respiratory problems. Therefore, finding promising techniques to alleviate the emission of this greenhouse gas may be of great urgency towards environmental protection. This paper aims to evaluate the potential of three novel absorbents (seawater (H2O), dimethyl aniline (DMA) and sodium hydroxide (NaOH) to separate SO2 acidic pollutant from SO2/air gaseous stream inside the hollow fiber membrane contactor (HFMC). To reach this goal, a CFD-based simulation was developed to predict the results. Also, a mathematical model was applied to theoretically evaluate the transport equations in different compartments of contactor. Comparison of the results has implied seawater is the most efficient liquid absorbent for separating SO2. After seawater, NaOH and DMA are placed at the second and third rank (99.36% separation using seawater > 62% separation using NaOH > 55% separation using DMA). Additionally, the influence of operational parameters (i.e., gas and liquid flow rates) and also membrane/module parameters (i.e., length of membrane module, hollow fibers' number and porosity) on the SO2 separation percentage is investigated as another highlight of this paper.
Collapse
Affiliation(s)
- Yan Cao
- grid.460183.80000 0001 0204 7871School of Computer Science and Engineering, Xi’an Technological University, Xi’an, 710021 People’s Republic of China
| | - Ali Taghvaie Nakhjiri
- grid.411463.50000 0001 0706 2472Department of Petroleum and Chemical Engineering, Science and Research Branch, Islamic Azad University, Tehran, Iran
| | - Mahdi Ghadiri
- grid.444918.40000 0004 1794 7022Institute of Research and Development, Duy Tan University, Da Nang, 550000 Vietnam ,grid.444918.40000 0004 1794 7022The Faculty of Environment and Chemical Engineering, Duy Tan University, Da Nang, 550000 Vietnam
| |
Collapse
|
6
|
Integration of ANN and NSGA-II for Optimization of Nusselt Number and Pressure Drop in a Coiled Heat Exchanger via Water-Based Nanofluid Containing Alumina and Ag Nanoparticles. ARABIAN JOURNAL FOR SCIENCE AND ENGINEERING 2022. [DOI: 10.1007/s13369-022-07480-3] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 12/02/2022]
|
7
|
State-of-the-Art Review on the Application of Membrane Bioreactors for Molecular Micro-Contaminant Removal from Aquatic Environment. MEMBRANES 2022; 12:membranes12040429. [PMID: 35448399 PMCID: PMC9032214 DOI: 10.3390/membranes12040429] [Citation(s) in RCA: 3] [Impact Index Per Article: 1.5] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Download PDF] [Figures] [Subscribe] [Scholar Register] [Received: 02/20/2022] [Revised: 03/29/2022] [Accepted: 04/08/2022] [Indexed: 12/27/2022]
Abstract
In recent years, the emergence of disparate micro-contaminants in aquatic environments such as water/wastewater sources has eventuated in serious concerns about humans’ health all over the world. Membrane bioreactor (MBR) is considered a noteworthy membrane-based technology, and has been recently of great interest for the removal micro-contaminants. The prominent objective of this review paper is to provide a state-of-the-art review on the potential utilization of MBRs in the field of wastewater treatment and micro-contaminant removal from aquatic/non-aquatic environments. Moreover, the operational advantages of MBRs compared to other traditional technologies in removing disparate sorts of micro-contaminants are discussed to study the ways to increase the sustainability of a clean water supplement. Additionally, common types of micro-contaminants in water/wastewater sources are introduced and their potential detriments on humans’ well-being are presented to inform expert readers about the necessity of micro-contaminant removal. Eventually, operational challenges towards the industrial application of MBRs are presented and the authors discuss feasible future perspectives and suitable solutions to overcome these challenges.
Collapse
|
8
|
Parsaei M, Roudbari E, Piri F, El-Shafay AS, Su CH, Nguyen HC, Alashwal M, Ghazali S, Algarni M. Neural-based modeling adsorption capacity of metal organic framework materials with application in wastewater treatment. Sci Rep 2022; 12:4125. [PMID: 35260785 PMCID: PMC8904475 DOI: 10.1038/s41598-022-08171-7] [Citation(s) in RCA: 5] [Impact Index Per Article: 2.5] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Download PDF] [Figures] [Journal Information] [Subscribe] [Scholar Register] [Received: 07/04/2021] [Accepted: 03/03/2022] [Indexed: 12/17/2022] Open
Abstract
We developed a computational-based model for simulating adsorption capacity of a novel layered double hydroxide (LDH) and metal organic framework (MOF) nanocomposite in separation of ions including Pb(II) and Cd(II) from aqueous solutions. The simulated adsorbent was a composite of UiO-66-(Zr)-(COOH)2 MOF grown onto the surface of functionalized Ni50-Co50-LDH sheets. This novel adsorbent showed high surface area for adsorption capacity, and was chosen to develop the model for study of ions removal using this adsorbent. A number of measured data was collected and used in the simulations via the artificial intelligence technique. Artificial neural network (ANN) technique was used for simulation of the data in which ion type and initial concentration of the ions in the feed was selected as the input variables to the neural network. The neural network was trained using the input data for simulation of the adsorption capacity. Two hidden layers with activation functions in form of linear and non-linear were designed for the construction of artificial neural network. The model's training and validation revealed high accuracy with statistical parameters of R2 equal to 0.99 for the fitting data. The trained ANN modeling showed that increasing the initial content of Pb(II) and Cd(II) ions led to a significant increment in the adsorption capacity (Qe) and Cd(II) had higher adsorption due to its strong interaction with the adsorbent surface. The neural model indicated superior predictive capability in simulation of the obtained data for removal of Pb(II) and Cd(II) from an aqueous solution.
Collapse
Affiliation(s)
- Mozhgan Parsaei
- School of Chemistry, College of Science, University of Tehran, Tehran, Iran.
| | - Elham Roudbari
- Department of Chemistry, Faculty of Science, Shahid Bahonar University of Kerman, Kerman, Iran
| | - Farhad Piri
- Electrical Engineering Department, Amirkabir University of Technology, Hafez Avenue, Tehran, Iran
| | - A S El-Shafay
- Department of Mechanical Engineering, College of Engineering, Prince Sattam Bin Abdulaziz University, Alkharj, 11942, Saudi Arabia.
| | - Chia-Hung Su
- Department of Chemical Engineering, Ming Chi University of Technology, New Taipei City, Taiwan.
| | - Hoang Chinh Nguyen
- Faculty of Applied Sciences, Ton Duc Thang University, Ho Chi Minh City, 700000, Vietnam
| | - May Alashwal
- Department of Computer Science, Jeddah International College, Jeddah, Saudi Arabia
| | - Sami Ghazali
- Mechanical and Materials Engineering Department, Faculty of Engineering, University of Jeddah, P.O. Box 80327, Jeddah, 21589, Saudi Arabia
| | - Mohammed Algarni
- Mechanical Engineering Department, Faculty of Engineering, King Abdulaziz University, P.O. Box 344, Rabigh, 21911, Saudi Arabia
| |
Collapse
|
9
|
Implementation of AdaBoost and genetic algorithm machine learning models in prediction of adsorption capacity of nanocomposite materials. J Mol Liq 2022. [DOI: 10.1016/j.molliq.2022.118527] [Citation(s) in RCA: 2] [Impact Index Per Article: 1.0] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/17/2022]
|
10
|
Wei Y, Yu J, Du Y, Li H, Su CH. Artificial intelligence simulation of Pb(II) and Cd(II) adsorption using a novel metal organic framework-based nanocomposite adsorbent. J Mol Liq 2021. [DOI: 10.1016/j.molliq.2021.117681] [Citation(s) in RCA: 6] [Impact Index Per Article: 2.0] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 02/04/2023]
|
11
|
Li M, Khan A, Mahlouji MD, Zare MH, Albadarin AB. Catalytic conversion modeling of methanol in dehydration reactor using Voronoi 3D pore network model. ARAB J CHEM 2021. [DOI: 10.1016/j.arabjc.2021.103284] [Citation(s) in RCA: 3] [Impact Index Per Article: 1.0] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 12/28/2022] Open
|
12
|
Zhu H, Zhu L, Sun Z, Khan A. Machine learning based simulation of an anti-cancer drug (busulfan) solubility in supercritical carbon dioxide: ANFIS model and experimental validation. J Mol Liq 2021. [DOI: 10.1016/j.molliq.2021.116731] [Citation(s) in RCA: 11] [Impact Index Per Article: 3.7] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 02/04/2023]
|
13
|
Ghanei-Nasab S, Hadizadeh F, Foroumadi A, Marjani A. A QSAR Study for the Prediction of Inhibitory Activity of Coumarin Derivatives for the Treatment of Alzheimer’s Disease. ARABIAN JOURNAL FOR SCIENCE AND ENGINEERING 2021. [DOI: 10.1007/s13369-020-05064-7] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 10/23/2022]
|
14
|
Manco L, Maffei N, Strolin S, Vichi S, Bottazzi L, Strigari L. Basic of machine learning and deep learning in imaging for medical physicists. Phys Med 2021; 83:194-205. [DOI: 10.1016/j.ejmp.2021.03.026] [Citation(s) in RCA: 12] [Impact Index Per Article: 4.0] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Submit a Manuscript] [Subscribe] [Scholar Register] [Received: 12/02/2020] [Revised: 03/07/2021] [Accepted: 03/16/2021] [Indexed: 02/08/2023] Open
|
15
|
Prediction of gas velocity in two-phase flow using developed fuzzy logic system with differential evolution algorithm. Sci Rep 2021; 11:2380. [PMID: 33504889 PMCID: PMC7840922 DOI: 10.1038/s41598-021-81957-3] [Citation(s) in RCA: 9] [Impact Index Per Article: 3.0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Download PDF] [Figures] [Journal Information] [Subscribe] [Scholar Register] [Received: 05/26/2020] [Accepted: 01/05/2021] [Indexed: 01/30/2023] Open
Abstract
In this investigation, differential evolution (DE) algorithm with the fuzzy inference system (FIS) are combined and the DE algorithm is employed in FIS training process. Considered data in this study were extracted from simulation of a 2D two-phase reactor in which gas was sparged from bottom of reactor, and the injected gas velocities were between 0.05 to 0.11 m/s. After doing a couple of training by making some changes in DE parameters and FIS parameters, the greatest percentage of FIS capacity was achieved. By applying the optimized model, the gas phase velocity in x direction inside the reactor was predicted when the injected gas velocity was 0.08 m/s.
Collapse
|
16
|
Pelalak R, Nakhjiri AT, Marjani A, Rezakazemi M, Shirazian S. Influence of machine learning membership functions and degree of membership function on each input parameter for simulation of reactors. Sci Rep 2021; 11:1891. [PMID: 33479358 PMCID: PMC7820399 DOI: 10.1038/s41598-021-81514-y] [Citation(s) in RCA: 11] [Impact Index Per Article: 3.7] [Reference Citation Analysis] [Abstract] [Track Full Text] [Download PDF] [Figures] [Journal Information] [Subscribe] [Scholar Register] [Received: 09/03/2020] [Accepted: 01/07/2021] [Indexed: 11/09/2022] Open
Abstract
To understand impact of input and output parameters during optimization and degree of complexity, in the current study we numerically designed a bubble column reactor with a single sparger in the middle of the reactor. After that, some input and output parameters were selected in the post-processing of the numerical method, and then the machine learning observation started to investigate the level of complexity and impact of each input on output parameters. The adaptive neuro-fuzzy inference system (ANFIS) method was exploited as a machine learning approach to analyze the gas-liquid flow in the reactor. The ANFIS method was used as a machine learning approach to simulate the flow of a 3D (three-dimensional) bubble column reactor. This model was also used to analyze the influence of input and output parameters together. More specifically, by analyzing the degree of membership functions as a function of each input, the level of complexity of gas fraction was investigated as a function of computing nodes (X, Y, and Z directions). The results showed that a higher number of membership functions results in a better understanding of the process and higher model accuracy and prediction capability. X and Y computing nodes have a similar impact on the gas fraction, while Z computing points (height of reactor) have a uniform distribution of membership function across the column. Four membership functions (MFs) in each input parameter are insufficient to predict the gas fraction in the 3D bubble column reactor. However, by adding two membership functions, all features of gas fraction in the 3D reactor can be captured by the machine learning algorithm. Indeed, the degree of MFs was considered as a function of each input parameter and the effective parameter was found based on the impact of MFs on the output.
Collapse
Affiliation(s)
- Rasool Pelalak
- Institute of Research and Development, Duy Tan University, Da Nang, 550000, Viet Nam.,Faculty of Environmental and Chemical Engineering, Duy Tan University, Da Nang, 550000, Viet Nam
| | - Ali Taghvaie Nakhjiri
- Department of Petroleum and Chemical Engineering, Science and Research Branch, Islamic Azad University, Tehran, Iran
| | - Azam Marjani
- Department for Management of Science and Technology Development, Ton Duc Thang University, Ho Chi Minh City, Viet Nam. .,Faculty of Applied Sciences, Ton Duc Thang University, Ho Chi Minh City, Viet Nam.
| | - Mashallah Rezakazemi
- Faculty of Chemical and Materials Engineering, Shahrood University of Technology, Shahrood, Iran
| | - Saeed Shirazian
- Laboratory of Computational Modeling of Drugs, South Ural State University, 76 Lenin Prospekt, Chelyabinsk, Russia, 454080
| |
Collapse
|
17
|
Investigation on performance of particle swarm optimization (PSO) algorithm based fuzzy inference system (PSOFIS) in a combination of CFD modeling for prediction of fluid flow. Sci Rep 2021; 11:1505. [PMID: 33452362 PMCID: PMC7810899 DOI: 10.1038/s41598-021-81111-z] [Citation(s) in RCA: 7] [Impact Index Per Article: 2.3] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Download PDF] [Figures] [Journal Information] [Subscribe] [Scholar Register] [Received: 08/26/2020] [Accepted: 01/04/2021] [Indexed: 01/29/2023] Open
Abstract
Herein, a reactor of bubble column type with non-equilibrium thermal condition between air and water is mechanistically modeled and simulated by the CFD technique. Moreover, the combination of the adaptive network (AN) trainer with the fuzzy inference system (FIS) as the artificial intelligence method calling ANFIS has already shown potential in the optimization of CFD approach. Although the artificial intelligence method of particle swarm optimization (PSO) algorithm based fuzzy inference system (PSOFIS) has a good background for optimizing the other fields of research, there are not any investigations on the cooperation of this method with the CFD. The PSOFIS can reduce all the difficulties and simplify the investigation by elimination of the additional CFD simulations. In fact, after achieving the best intelligence, all the predictions can be done by the PSOFIS instead of the massive computational efforts needed for CFD modeling. The first aim of this study is to develop the PSOFIS for use in the CFD approach application. The second one is to make a comparison between the PSOFIS and ANFIS for the accurate prediction of the CFD results. In the present study, the CFD data are learned by the PSOFIS for prediction of the water velocity inside the bubble column. The values of input numbers, swarm sizes, and inertia weights are investigated for the best intelligence. Once the best intelligence is achieved, there is no need to mesh refinement in the CFD domain. The mesh density can be increased, and the newer predictions can be done in an easier way by the PSOFIS with much less computational efforts. For a strong verification, the results of the PSOFIS in the prediction of the liquid velocity are compared with those of the ANFIS. It was shown that for the same fuzzy set parameters, the PSOFIS predictions are closer to the CFD in comparison with the ANFIS. The regression number (R) of the PSOFIS (0.98) was a little more than that of the ANFIS (0.97). The PSOFIS showed a powerful potential in mesh density increment from 9477 to 774,468 and accurate predictions for the new nodes independent of the CFD modeling.
Collapse
|
18
|
Thermal prediction of turbulent forced convection of nanofluid using computational fluid dynamics coupled genetic algorithm with fuzzy interface system. Sci Rep 2021; 11:1308. [PMID: 33446789 PMCID: PMC7809283 DOI: 10.1038/s41598-020-80207-2] [Citation(s) in RCA: 12] [Impact Index Per Article: 4.0] [Reference Citation Analysis] [Abstract] [Track Full Text] [Download PDF] [Figures] [Journal Information] [Subscribe] [Scholar Register] [Received: 09/09/2020] [Accepted: 12/17/2020] [Indexed: 11/22/2022] Open
Abstract
Computational fluid dynamics (CFD) simulating is a useful methodology for reduction of experiments and their associated costs. Although the CFD could predict all hydro-thermal parameters of fluid flows, the connections between such parameters with each other are impossible using this approach. Machine learning by the artificial intelligence (AI) algorithm has already shown the ability to intelligently record engineering data. However, there are no studies available to deeply investigate the implicit connections between the variables resulted from the CFD. The present investigation tries to conduct cooperation between the mechanistic CFD and the artificial algorithm. The genetic algorithm is combined with the fuzzy interface system (GAFIS). Turbulent forced convection of Al2O3/water nanofluid in a heated tube is simulated for inlet temperatures (i.e., 305, 310, 315, and 320 K). GAFIS learns nodes coordinates of the fluid, the inlet temperatures, and turbulent kinetic energy (TKE) as inputs. The fluid temperature is learned as output. The number of inputs, population size, and the component are checked for the best intelligence. Finally, at the best intelligence, a formula is developed to make a relationship between the output (i.e. nanofluid temperatures) and inputs (the coordinates of the nodes of the nanofluid, inlet temperature, and TKE). The results revealed that the GAFIS intelligence reaches the highest level when the input number, the population size, and the exponent are 5, 30, and 3, respectively. Adding the turbulent kinetic energy as the fifth input, the regression value increases from 0.95 to 0.98. This means that by considering the turbulent kinetic energy the GAFIS reaches a higher level of intelligence by distinguishing the more difference between the learned data. The CFD and GAFIS predicted the same values of the nanofluid temperature.
Collapse
|
19
|
Velocity prediction of nanofluid in a heated porous pipe: DEFIS learning of CFD results. Sci Rep 2021; 11:1209. [PMID: 33441681 PMCID: PMC7806800 DOI: 10.1038/s41598-020-79913-8] [Citation(s) in RCA: 5] [Impact Index Per Article: 1.7] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Download PDF] [Figures] [Journal Information] [Subscribe] [Scholar Register] [Received: 09/09/2020] [Accepted: 12/15/2020] [Indexed: 01/29/2023] Open
Abstract
Utilizing artificial intelligence algorithm of adaptive network-based fuzzy inference system (ANFIS) in combination with the computational lfuid dynamics (CFD) has recently revealed great potential as an auxiliary method for simulating challenging fluid mechnics problems. This research area is at the beginning, and needs sophisticated algorithms to be developed. No studies are available to consider the efficiency of the other trainers like differential evolution (DE) integrating with the FIS for capturing the pattern of the simulation results generated by CFD technique. Besides, the adjustment of the tuning parameters of the artificial intelligence (AI) algorithm for finding the highest level of intelligence is unavailable. The performance of AI algorithms in the meshing process has not been considered yet. Therfore, herein the Al2O3/water nanofluid flow in a porous pipe is simulated by a sophisticated hybrid approach combining mechnsitic model (CFD) and AI. The finite volume method (FVM) is employed as the CFD approach. Also, the differential evolution-based fuzzy inference system (DEFIS) is used for learning the CFD results. The DEFIS learns the nanofluid velocity in the y-direction, as output, and the nodes coordinates (i.e., x, y, and z), as inputs. The intelligence of the DEFIS is assessed by adjusting the methd's variables including input number, population number, and crossover. It was found that the DEFIS intelligence is related to the input number of 3, the crossover of 0.8, and the population number of 120. In addition, the nodes increment from 4833 to 774,468 was done by the DEFIS. The DEFIS predicted the velocity for the new dense mesh without using the CFD data. Finally, all CFD results were covered with the new predictions of the DEFIS.
Collapse
|
20
|
Babanezhad M, Rezakazemi M, Marjani A, Shirazian S. Predicting Air Superficial Velocity of Two-Phase Reactors Using ANFIS and CFD. ACS OMEGA 2021; 6:239-252. [PMID: 33458476 PMCID: PMC7807482 DOI: 10.1021/acsomega.0c04386] [Citation(s) in RCA: 6] [Impact Index Per Article: 2.0] [Reference Citation Analysis] [Abstract] [Track Full Text] [Figures] [Subscribe] [Scholar Register] [Received: 09/08/2020] [Accepted: 12/08/2020] [Indexed: 06/12/2023]
Abstract
In predicting the turbulence property of gas (bubble) flow in the domain of continuous fluid and liquid, the integration of machine learning and computational fluid dynamics (CFD) methods reduces the overall computational time. This combination enables us to see the effective input parameters in the engineering process and the impact of operating conditions on final outputs, such as gas hold-up, heat and mass transfer, and the flow regime (uniform bubble distribution or nonuniform bubble properties). This paper uses the combination of machine learning and single-size calculation of the Eulerian method to estimate the gas flow distribution in the continuous liquid fluid. To present the machine-learning method besides the Eulerian method, an adaptive neuro-fuzzy inference system (ANFIS) is used to train the CFD finding and then estimate the flow based on the machine-learning method. The gas velocity and turbulent eddy dissipation rate are trained throughout the bubble column reactor (BCR) for each CFD node, and the artificial BCR is predicted by the ANFIS method. This smart reactor can represent the artificial CFD of the BCR, resulting in the reduction of expensive numerical simulations. The results showed that the number of inputs could significantly change this method's accuracy, representing the intelligence of method in the learning data set. Additionally, the membership function specifications can impact the accuracy, particularly, when the process is trained with different inputs. The turbulent eddy dissipation rate can also be predicted by the ANFIS method with a similar model pattern for air superficial gas velocity.
Collapse
Affiliation(s)
- Meisam Babanezhad
- Institute
of Research and Development, Duy Tan University, Da Nang 550000, Vietnam
- Faculty
of Electrical−Electronic Engineering, Duy Tan University, Da Nang 550000, Vietnam
| | - Mashallah Rezakazemi
- Faculty
of Chemical and Materials Engineering, Shahrood
University of Technology, Shahrood, Iran
| | - Azam Marjani
- Department
for Management of Science and Technology Development, Ton Duc Thang University, Ho Chi
Minh City, Vietnam
- Faculty
of Applied Sciences, Ton Duc Thang University, Ho Chi Minh City, Vietnam
| | - Saeed Shirazian
- Laboratory
of Computational Modeling of Drugs, South
Ural State University, 76 Lenin Prospekt, Chelyabinsk 454080, Russia
| |
Collapse
|
21
|
Babanezhad M, Behroyan I, Marjani A, Shirazian S. Pressure and temperature predictions of Al 2O 3/water nanofluid flow in a porous pipe for different nanoparticles volume fractions: combination of CFD and ACOFIS. Sci Rep 2021; 11:60. [PMID: 33420204 PMCID: PMC7794232 DOI: 10.1038/s41598-020-79689-x] [Citation(s) in RCA: 6] [Impact Index Per Article: 2.0] [Reference Citation Analysis] [Abstract] [Track Full Text] [Download PDF] [Figures] [Journal Information] [Subscribe] [Scholar Register] [Received: 09/09/2020] [Accepted: 12/11/2020] [Indexed: 11/25/2022] Open
Abstract
Artificial intelligence (AI) techniques have illustrated significant roles in finding general patterns of CFD (Computational fluid dynamics) results. This study is conducted to develop combination of the ant colony optimization (ACO) algorithm with the fuzzy inference system (ACOFIS) for learning the CFD results of a physical case study. This binary join of the ACOFIS and CFD was used for pressure and temperature predictions of Al2O3/water nanofluid flow in a heated porous pipe. The intelligence of ACOFIS is investigated for different input numbers and pheromone effects, as the ant colony tuning parameter. The results showed that the intelligence of the ACOFIS could be found for three inputs (x and y nodes coordinates and nanoparticles fraction) and the pheromone effect of 0.1. At the system intelligence, the ACOFIS could predict the pressure and temperature of the nanofluid on any values of the nanoparticles fraction between 0.5 and 2%. Comparing the ANFIS and the ACOFIS, it was shown that both methods could reach the same accuracy in predictions of the nanofluid pressure and temperature. The root mean square error (RMSE) of the ACOFIS (~ 1.3) was a little more than that of the ANFIS (~ 0.03), while the total process time of the ANFIS (~ 213 s) was a bit more than that of the ACOFIS (~ 198 s). The AI algorithms process time (less than 4 min) shows their ability in the reduction of CFD modeling calculations and expenses.
Collapse
Affiliation(s)
- Meisam Babanezhad
- Institute of Research and Development, Duy Tan University, Da Nang, 550000, Viet Nam.,Faculty of Electrical-Electronic Engineering, Duy Tan University, Da Nang, 550000, Viet Nam.,Department of Artificial Intelligence, Shunderman Industrial Strategy Co., Tehran, Iran
| | - Iman Behroyan
- Faculty of Mechanical and Energy Engineering, Shahid Beheshti University, Tehran, Iran.,Department of Computational Fluid Dynamics, Shunderman Industrial Strategy Co., Tehran, Iran
| | - Azam Marjani
- Department for Management of Science and Technology Development, Ton Duc Thang University, Ho Chi Minh City, Viet Nam. .,Faculty of Applied Sciences, Ton Duc Thang University, Ho Chi Minh City, Viet Nam.
| | - Saeed Shirazian
- Laboratory of Computational Modeling of Drugs, South Ural State University, 76 Lenin prospekt, 454080, Chelyabinsk, Russia
| |
Collapse
|
22
|
Babanezhad M, Behroyan I, Nakhjiri AT, Marjani A, Heydarinasab A, Shirazian S. Liquid temperature prediction in bubbly flow using ant colony optimization algorithm in the fuzzy inference system as a trainer. Sci Rep 2020; 10:21884. [PMID: 33318542 PMCID: PMC7736853 DOI: 10.1038/s41598-020-78751-y] [Citation(s) in RCA: 7] [Impact Index Per Article: 1.8] [Reference Citation Analysis] [Abstract] [Track Full Text] [Download PDF] [Figures] [Journal Information] [Subscribe] [Scholar Register] [Received: 05/23/2020] [Accepted: 11/30/2020] [Indexed: 11/10/2022] Open
Abstract
In the current research paper a novel hybrid model combining first-principle and artificial intelligence (AI) was developed for simulation of a chemical reactor. We study a 2-dimensional reactor with heating sources inside it by using computational fluid dynamics (CFD). The type of considered reactor is bubble column reactor (BCR) in which a two-phase system is created. Results from CFD were analyzed in two different stages. The first stage, which is the learning stage, takes advantage of the swarm intelligence of the ant colony. The second stage results from the first stage, and in this stage, the predictions are according to the previous stage. This stage is related to the fuzzy logic system, and the ant colony optimization learning framework is build-up this part of the model. Ants movements or swarm intelligence of ants lead to the optimization of physical, chemical, or any kind of processes in nature. From point to point optimization, we can access a kind of group optimization, meaning that a group of data is studied and optimized. In the current study, the swarm intelligence of ants was used to learn the data from CFD in different parts of the BCR. The learning was also used to map the input and output data and find out the complex connection between the parameters. The results from mapping the input and output data show the full learning framework. By using the AI framework, the learning process was transferred into the fuzzy logic process through membership function specifications; therefore, the fuzzy logic system could predict a group of data. The results from the swarm intelligence of ants and fuzzy logic suitably adapt to CFD results. Also, the ant colony optimization fuzzy inference system (ACOFIS) model is employed to predict the temperature distribution in the reactor based on the CFD results. The results indicated that instead of solving Navier–Stokes equations and complex solving procedures, the swarm intelligence could be used to predict a process. For better comparisons and assessment of the ACOFIS model, this model is compared with the genetic algorithm fuzzy inference system (GAFIS) and Particle swarm optimization fuzzy inference system (PSOFIS) method with regards to model accuracy, pattern recognition, and prediction capability. All models are at a similar level of accuracy and prediction ability, and the prediction time for all models is less than one second. The results show that the model’s accuracy with low computational learning time can be achieved with the high number of CIR (0.5) when the number of inputs ≥ 4. However, this finding is vice versa, when the number of inputs < 4. In this case, the CIR number should be 0.2 to achieve the best accuracy of the model. This finding could also highlight the importance of sensitivity analysis of tuning parameters to achieve an accurate model with a cost-effective computational run.
Collapse
Affiliation(s)
- Meisam Babanezhad
- Institute of Research and Development, Duy Tan University, Da Nang, 550000, Vietnam.,Faculty of Electrical-Electronic Engineering, Duy Tan University, Da Nang, 550000, Vietnam
| | - Iman Behroyan
- Mechanical and Energy Engineering Department, Shahid Beheshti University, Tehran, Iran
| | - Ali Taghvaie Nakhjiri
- Department of Petroleum and Chemical Engineering, Science and Research Branch, Islamic Azad University, Tehran, Iran
| | - Azam Marjani
- Department for Management of Science and Technology Development, Ton Duc Thang University, Ho Chi Minh City, Vietnam. .,Faculty of Applied Sciences, Ton Duc Thang University, Ho Chi Minh City, Vietnam.
| | - Amir Heydarinasab
- Department of Petroleum and Chemical Engineering, Science and Research Branch, Islamic Azad University, Tehran, Iran
| | - Saeed Shirazian
- Laboratory of Computational Modeling of Drugs, South Ural State University, 76 Lenin Prospekt, 454080, Chelyabinsk, Russia
| |
Collapse
|
23
|
Multidimensional machine learning algorithms to learn liquid velocity inside a cylindrical bubble column reactor. Sci Rep 2020; 10:21502. [PMID: 33299033 PMCID: PMC7725990 DOI: 10.1038/s41598-020-78388-x] [Citation(s) in RCA: 5] [Impact Index Per Article: 1.3] [Reference Citation Analysis] [Abstract] [Track Full Text] [Download PDF] [Figures] [Journal Information] [Subscribe] [Scholar Register] [Received: 06/27/2020] [Accepted: 11/24/2020] [Indexed: 11/16/2022] Open
Abstract
For understanding the complex behavior of fluids in a multiphase chemical bubble column reactor, a combination of the computational fluid dynamic (CFD) method and the adaptive network-based fuzzy inference system (ANFIS) method is used to predict bubble flow inside a reactor based on the function of column height. In this study, the Euler–Euler model is employed as a CFD method. In the Eulerian method, continuity and momentum governing equations are mathematically computed for each phase, while the equations are connected together by source terms. After calculating the flow pattern and turbulence flow in the reactor, all data sets are used to prepare a fully artificial method for further prediction. This algorithm contains different learning dimensions such as learning in different directions of reactor or large amount of input parameters and data set representing “big data”. The ANFIS method was evaluated in three steps by using one, two, and three inputs in each one to predict the liquid velocity in the x-direction (Ux). The x, y, and z coordinates of the location of the node of the liquid were considered as the inputs. Different percentages of data and various iterations and membership functions were used for training in the ANFIS method. The ANFIS method showed the best prediction using three inputs. This combination also shows the ability of computer science and computational methods in learning physical and chemical phenomena.
Collapse
|
24
|
Babanezhad M, Behroyan I, Nakhjiri AT, Marjani A, Shirazian S. Computational Modeling of Transport in Porous Media Using an Adaptive Network-Based Fuzzy Inference System. ACS OMEGA 2020; 5:30826-30835. [PMID: 33324792 PMCID: PMC7726747 DOI: 10.1021/acsomega.0c04497] [Citation(s) in RCA: 16] [Impact Index Per Article: 4.0] [Reference Citation Analysis] [Abstract] [Track Full Text] [Subscribe] [Scholar Register] [Received: 07/05/2020] [Accepted: 11/06/2020] [Indexed: 05/24/2023]
Abstract
This investigation is conducted to study the integration of the artificial intelligence (AI) method with computational fluid dynamics (CFD). The case study is hydrodynamic and heat-transfer analyses of water flow in a metal foam tube under a constant wall heat flux (i.e., 55 kW/m2). The adaptive network-based fuzzy inference system (ANFIS) is an AI method. A 3D CFD model is established in ANSYS-FLUENT software. The velocity of the fluid in the x-direction (Ux) is considered as an output of the ANFIS. The x, y, and z coordinates of the node's location are added to the ANFIS step-by-step to achieve the best intelligence. The number and type of membership functions (MFs) are changed in each step. The training process is done by the CFD results on the tube cross-sections at different lengths (i.e., z = 0.1, 0.2, 0.3, 0.4, 0.6, 0.7, 0.8, and 0.9), while all data (including z = 0.5) are selected for the testing process. The results showed that the ANFIS reaches the best intelligence with all three inputs, five MFs, and "gbellmf"-type MF. At this condition, the regression number is close to 1.
Collapse
Affiliation(s)
- Meisam Babanezhad
- Institute
of Research and Development, Duy Tan University, Da Nang 550000, Vietnam
- Faculty
of Electrical−Electronic Engineering, Duy Tan University, Da Nang 550000, Vietnam
| | - Iman Behroyan
- Faculty
of Mechanical and Energy Engineering, Shahid
Beheshti University, Tehran 1983969411, Iran
| | - Ali Taghvaie Nakhjiri
- Department of Petroleum and Chemical
Engineering, Science and Research Branch, Islamic Azad University, Tehran 1477893855, Iran
| | - Azam Marjani
- Department
for Management of Science and Technology Development, Ton Duc Thang University, Ho Chi
Minh City 758307, Vietnam
- Faculty
of
Applied Sciences, Ton Duc Thang University, Ho Chi Minh City, Vietnam
| | - Saeed Shirazian
- Department
of Chemical Sciences, Bernal Institute, University of Limerick, Limerick V94 T9PX, Ireland
- Laboratory
of Computational Modeling of Drugs, South
Ural State University, 76 Lenin prospekt, Chelyabinsk 454080, Russia
| |
Collapse
|
25
|
Babanezhad M, Behroyan I, Nakhjiri AT, Marjani A, Rezakazemi M, Shirazian S. High-performance hybrid modeling chemical reactors using differential evolution based fuzzy inference system. Sci Rep 2020; 10:21304. [PMID: 33277606 PMCID: PMC7718251 DOI: 10.1038/s41598-020-78277-3] [Citation(s) in RCA: 17] [Impact Index Per Article: 4.3] [Reference Citation Analysis] [Abstract] [Track Full Text] [Download PDF] [Figures] [Journal Information] [Subscribe] [Scholar Register] [Received: 08/14/2020] [Accepted: 11/23/2020] [Indexed: 11/09/2022] Open
Abstract
Bubbly flow behavior simulation in two-phase chemical reactors such bubble column type reactors is widely employed for chemical industry purposes. The computational fluid dynamics (CFD) approach has been employed by engineers and researchers for modeling these types of chemical reactors. In spite of the CFD robustness for simulating transport phenomena and chemical reactions in these reactors, this approach has been known as expensive for modeling such turbulent complex flows. Artificial intelligence (AI) algorithm of the adaptive network-based fuzzy inference system (ANFIS) are largely understood and utilized for the CFD approach optimization. In this hybrid approach, the CFD findings are learned by AI algorithms like ANFIS to save computational time and expenses. Once the pattern of the CFD results have been captured by the AI model, this hybrid model can be then used for process simulation and optimization. As such, there is no need for further simulations of new conditions. The objective of this paper is to obviate the need for expensive CFD computations for two-phase flows in chemical reactors via coupling CFD data to an AI algorithm, i.e., differential evolution based fuzzy inference system (DEFIS). To do so, air velocity as the output and the values of the x, and y coordinates, water velocity, and time step as the inputs are inputted the AI model for learning the flow pattern. The effects of cross over as the DE parameter and also the number of inputs on the best intelligence are investigated. Indeed, DEFIS correlates the air velocity to the nodes coordinates, time, and liquid velocity and then after the CFD modeling could be replaced with the simple correlation. For the first time, a comparison is made between the ANFIS and the DEFIS performances in terms of the prediction capability of the gas (air) velocity. The results released that both ANFIS and DEFIS could accurately predict the CFD pattern. The prediction times of both methods were obtained to be equal. However, the learning time of the DEFIS was fourfold of ANFIS.
Collapse
Affiliation(s)
- Meisam Babanezhad
- Institute of Research and Development, Duy Tan University, Da Nang, 550000, Vietnam.,Faculty of Electrical-Electronic Engineering, Duy Tan University, Da Nang, 550000, Vietnam
| | - Iman Behroyan
- Faculty of Mechanical and Energy Engineering, Shahid Beheshti University, Tehran, Iran
| | - Ali Taghvaie Nakhjiri
- Department of Petroleum and Chemical Engineering, Science and Research Branch, Islamic Azad University, Tehran, Iran
| | - Azam Marjani
- Department for Management of Science and Technology Development, Ton Duc Thang University, Ho Chi Minh City, Vietnam. .,Faculty of Applied Sciences, Ton Duc Thang University, Ho Chi Minh City, Vietnam.
| | - Mashallah Rezakazemi
- Faculty of Chemical and Materials Engineering, Shahrood University of Technology, Shahrood, Iran
| | - Saeed Shirazian
- Laboratory of Computational Modeling of Drugs, South Ural State University, 76 Lenin prospekt, 454080, Chelyabinsk, Russia
| |
Collapse
|
26
|
Mechanistic modeling and numerical simulation of axial flow catalytic reactor for naphtha reforming unit. PLoS One 2020; 15:e0242343. [PMID: 33216768 PMCID: PMC7679015 DOI: 10.1371/journal.pone.0242343] [Citation(s) in RCA: 6] [Impact Index Per Article: 1.5] [Reference Citation Analysis] [Abstract] [Track Full Text] [Download PDF] [Figures] [Journal Information] [Subscribe] [Scholar Register] [Received: 08/03/2020] [Accepted: 11/01/2020] [Indexed: 11/19/2022] Open
Abstract
Naphtha catalytic reforming (NCR) process has been of tremendous attention all over the world owing to the significant requirement for high-quality gasoline. Industrialized naphtha reforming unit at oil refineries applies a series of fixed bed reactors (FBRs) to improve the quality of the low-octane hydrocarbons and convert them to more valuable products. The prominent purpose of this research is to understand the catalytic reactor of naphtha reforming unit. For this aim, an appropriate mechanistic modeling and its related CFD-based computational simulation is presented to predict the behavior of the system when the reactors are of the axial flow type. Also, the triangular meshing technique (TMT) is performed in this paper due to its brilliant ability to analyze the results of model’s predictions along with improving the computational accuracy. Additionally, mesh independence analysis is done to find the optimum number of meshes needed for reaching the results convergence. Moreover, suitable kinetic and thermodynamic equations are derived based on Smith model to describe the NCR process. The results proved that the proceeding of NCR process inside the reactor significantly increased the concentration amount of aromatic materials, lighter ends and hydrogen, while deteriorated the concentration amount of naphthene and paraffin. Moreover, the pressure drop along the reactor length was achieved very low, which can be considered as one of the momentous advantages of NCR process.
Collapse
|
27
|
Prediction of turbulence eddy dissipation of water flow in a heated metal foam tube. Sci Rep 2020; 10:19280. [PMID: 33159145 PMCID: PMC7648062 DOI: 10.1038/s41598-020-76260-6] [Citation(s) in RCA: 23] [Impact Index Per Article: 5.8] [Reference Citation Analysis] [Abstract] [Track Full Text] [Download PDF] [Figures] [Journal Information] [Subscribe] [Scholar Register] [Received: 06/23/2020] [Accepted: 10/26/2020] [Indexed: 11/29/2022] Open
Abstract
The insertion of porous metal media inside the pipes and channels has already shown a significant heat transfer enhancement by experimental and numerical studies. Porous media could make a mixing flow and small-scale eddies. Therefore, the turbulence parameters are attractive in such cases. The computational fluid dynamics (CFD) approach can predict the turbulence parameters using the turbulence models. However, the CFD is unable to find the relation of the turbulence parameters to the boundary conditions. The artificial intelligence (AI) has shown potential in combination with the CFD to build high-performance predictive models. This study is aimed to establish a new AI algorithm to capture the patterns of the CFD results by changing the system’s boundary conditions. The ant colony optimization-based fuzzy inference system (ACOFIS) method is used for the first time to reduce time and computational effort needed in the CFD simulation. This investigation is done on turbulent forced convection of water through an aluminum metal foam tube under constant wall heat flux. The ANSYS-FLUENT CFD software is used for the simulations. The x and y of the fluid nodal locations, inlet temperature, velocity, and turbulent kinetic energy (TKE) are the inputs of the ACOFIS to predict turbulence eddy dissipation (TED) as the output. The results revealed that for the best intelligence of the ACOFIS, the number of inputs, the number of ants, the number of membership functions (MFs) and the rule are 5, 10, 93 and 93, respectively. Further comparison is made with the adaptive network-based fuzzy inference system (ANFIS). The coefficient of determination for both methods was close to 1. The ANFIS showed more learning and prediction times (785 s and 10 s, respectively) than the ACOFIS (556 s and 3 s, respectively). Finding the member function versus the inputs, the value of TED is calculated without the CFD modeling. So, solving the complicated equations by the CFD is replaced with a simple correlation.
Collapse
|
28
|
Babanezhad M, Taghvaie Nakhjiri A, Rezakazemi M, Marjani A, Shirazian S. Functional input and membership characteristics in the accuracy of machine learning approach for estimation of multiphase flow. Sci Rep 2020; 10:17793. [PMID: 33082441 PMCID: PMC7575550 DOI: 10.1038/s41598-020-74858-4] [Citation(s) in RCA: 17] [Impact Index Per Article: 4.3] [Reference Citation Analysis] [Abstract] [Track Full Text] [Download PDF] [Figures] [Journal Information] [Subscribe] [Scholar Register] [Received: 06/27/2020] [Accepted: 10/08/2020] [Indexed: 11/19/2022] Open
Abstract
In the current study, Artificial Intelligence (AI) approach was used for the learning of a physical system. We applied four inputs and one output in the learning process of AI. In the learning process, the inputs are space locations of a BCR (bubble column reactor), which are x, y, and z coordinate as well as the amount of gas fraction in BCR. The liquid velocity is also considered as output. A variety of functions were used in learning, such as gbellmf and gaussmf functions, to examine which functions can give the best learning. At the end of the study, all of the results were compared to CFD (computational fluid dynamics). A three-dimensional (3D) BCR was used in this research, and we studied simulation by CFD as well as AI. The data from CFD in a 3D BCR was studied in the AI domain. In AI, we tuned for various parameters to achieve the best intelligence in the system. For instance, different inputs, different membership functions, different numbers of membership functions were used in the learning process. Moreover, the meshless prediction was used, meaning that some data in the BCR have not participated in the learning, and they were predicted in the prediction process, which gives us a special capability to compare the results with the CFD outcomes. The findings showed us that AI can predict the CFD results, and a great agreement was achieved between CFD computing nodes and AI elements. This novel methodology can suggest a meshless and multifunctional AI model to simulate the turbulence flow in the BCR. For further evaluation, the ANFIS method is compared with ACOFIS and PSOFIS methods with regards to model’s accuracy. The results show that ANFIS method contains higher accuracy and prediction capability compared with ACOFIS and PSOFIS methods.
Collapse
Affiliation(s)
- Meisam Babanezhad
- Institute of Research and Development, Duy Tan University, Da Nang, 550000, Vietnam.,Faculty of Electrical - Electronic Engineering, Duy Tan University, Da Nang, 550000, Vietnam
| | - Ali Taghvaie Nakhjiri
- Department of Petroleum and Chemical Engineering, Science and Research Branch, Islamic Azad University, Tehran, Iran
| | - Mashallah Rezakazemi
- Faculty of Chemical and Materials Engineering, Shahrood University of Technology, Shahrood, Iran
| | - Azam Marjani
- Department for Management of Science and Technology Development, Ton Duc Thang University, Ho Chi Minh City, Vietnam. .,Faculty of Applied Sciences, Ton Duc Thang University, Ho Chi Minh City, Vietnam.
| | - Saeed Shirazian
- Department of Chemical Sciences, Bernal Institute, University of Limerick, Limerick, Ireland.,Laboratory of Computational Modeling of Drugs, South Ural State University, 76 Lenin Prospekt, Chelyabinsk, Russia, 454080
| |
Collapse
|