Carbon Dioxide Reduction Mediated by Iron Catalysts: Mechanism and Intermediates That Guide Selectivity

Modulation of Photocatalytic CO2 Reduction by n-p Codoping Engineering of Single-Atom Catalysts

Transition metal (TM) single-atom catalysts (SACs) have been widely applied in photocatalytic CO2 reduction. In this work, n-p codoping engineering is introduced to account for the modulation of photocatalytic CO2 reduction on a two-dimensional (2D) bismuth-oxyhalide-based cathode by using first-principles calculation. n-p codoping is established via the Coulomb interactions between the negatively charged TM SACs and the positively charged Cl vacancy (VCl) in the dopant-defect pairs. Based on the formation energy of charged defects, neutral dopant-defect pairs for the Fe, Co, and Ni SACs (PTM0) and the -1e charge state of the Cu SAC-based pair (PCu-1) are stable. The electrostatic attraction of the n-p codoping strengthens the stability and solubility of TM SACs by neutralizing the oppositely charged VCl defect and TM dopant. The n-p codoping stabilizes the electron accumulation around the TM SACs. Accumulated electrons modify the d-orbital alignment and shift the d-band center toward the Fermi level, enhancing the reducing capacity of TM SACs based on the d-band theory. Besides the electrostatic attraction of the n-p codoping, the PCu-1 also accumulates additional electrons surrounding Cu SACs and forms a half-occupied dx2-y2 state, which further upshifts the d-band center and improves photocatalytic CO2 reduction. The metastability of Cl multivacancies limits the concentration of the n-p pairs with Cl multivacancies (PTM@nCl (n > 1)). Positively charged centers around the PTM@nCl (n > 1) hinders the CO2 reduction by shielding the charge transfer to the CO2 molecule.

A Blueprint for Secondary Coordination Sphere Editing: Approaches Toward Lewis-Acid Assisted Carbon Dioxide Co-Activation

Carbon dioxide (CO2) is a potent greenhouse gas of environmental concern. Seeking to offer a solution to the "CO2-problem", the chemistry community has turned a focus toward transition metal complexes which can activate, reduce, and convert CO2 into carbon-based products. The design of such systems involves judicious selection of both metal and accompanying donor ligand; in part, these efforts are motivated by biological metalloenzymes that undertake similar transformations. As a design element, metal-ligand cooperativity, which leverages intramolecular interactions between a transition metal and an adjacent secondary ligand site, has been acknowledged as a vitally important component by the CO2 activation community. These systems offer a "push-pull" style of activation where electron density is chaperoned onto CO2 with an accompanying electrophile, such as a Lewis-acid, playing the role of acceptor. This pairing allows for the stabilization of reactive CxHyOz-containing intermediates and can bias CO2 product selectivity. In the laboratory, chemists can test hypotheses and ideas, enabling rationalization of why a given pairing of transition metal/Lewis-acid leads to selective CO2 reduction outcomes. This Concept identifies literature examples and highlights key design properties, allowing interested contributors to design, create, and implement novel systems for productive transformations of a small molecule (CO2) with huge potential impact.

Low Potential CO2 Reduction by Inert Fe(II)-Macrobicyclic Complex: A New Concept of Cavity Assisted CO2 Activation

The advantage of a pre-organized π-cavity of Fe(II) complex of a newly developed macrobicycle cryptand is explored for CO2 reduction by overcoming the problem of high overpotential associated with the inert nature of the cryptate. Thus, a bipyridine-centered tritopic macrobicycle having a molecular π-cavity capable of forming Fe(II) complex as well as potential for CO2 encapsulation is synthesized. The inert Fe(II)-cryptate shows much lower potential in cyclic voltammetry than the Fe(II)-tris-dimethylbipyridine (Fe-MBP) core. Interestingly, this cryptate shows electrochemical CO2 reduction at a considerably lower potential than the Fe-MBP inert core. Therefore, this study represents that a well-structured π-cavity may generate a new series of molecular catalysts for the CO2 reduction reaction (CO2 RR), even with the inert metal complexes.

Catalytic CO2 Reduction with Heptacoordinated Polypyridine Complexes: Switching the Selectivity via Metal Replacement

The discovery of molecular catalysts for the CO2 reduction reaction (CO2 RR) in the presence of water, which are both effective and selective towards the generation of carbon-based products, is a critical task. Herein we report the catalytic activity towards the CO2 RR in acetonitrile/water mixtures by a cobalt complex and its iron analog both featuring the same redox-active ligand and an unusual seven-coordination environment. Bulk electrolysis experiments show that the cobalt complex mainly yields formate (52 % selectivity at an applied potential of -2.0 V vs Fc+ /Fc and 1 % H2 O) or H2 (up to 86 % selectivity at higher applied bias and water content), while the iron complex always delivers CO as the major product (selectivity >74 %). The different catalytic behavior is further confirmed under photochemical conditions with the [Ru(bpy)3 ]2+ sensitizer (bpy=2,2'-bipyridine) and N,N-diisopropylethylamine as electron donor, where the cobalt complex leads to preferential H2 formation (up to 89 % selectivity), while the iron analog quantitatively generates CO (up to 88 % selectivity). This is ascribed to a preference towards a metal-hydride vs. a metal-carboxyl pathway for the cobalt and the iron complex, respectively, and highlights how metal replacement may effectively impact on the reactivity of transition metal complexes towards solar fuel formation.

An Investigation of Allyl-Substituted Bis(Diphosphine) Iron Complexes: Towards Precursors for Cooperative CO2 Activation

In developing homogenous catalysts capable of CO2 activation, interaction with a metal center is often imperative. This work provides primary efforts towards the cooperative activation of CO2 using a Lewis acidic secondary coordination sphere (SCS) and iron via a paired theoretical/experimental approach. Specifically, this study reports efforts towards [Fe(diphosphine)2 (N2 )] as a CO2 -coordinated synthon where diphosphine=1,2-bis(di(3-cyclohexylboranyl)propylphosphino)ethane) (P2 BCy 4 ) or its precursor, 1,2-bis(diallylphosphino)ethane (tape). Initial efforts toward the {Fe(0)-N2 } complex were focused on deprotonation reactions of [Fe(diphosphine)2 (H)(NCCH3 )]+ and reduction of [Fe(tape)2 Cl2 ]. In the latter case, a mixture of intramolecularly π-bonded alkene and associated metallacyclic Fe(II)-H species were produced - heating this mixture provided the hydride as the major product. Notably, the interconversion of this pair counters that of related intermolecular reactions between [Fe(depe)2 ] (depe=1,2-bis(diethylphosphino)ethane) and ethylene, where hydride formation occurs subsequent to π-coordination; this has been probed by theoretical calculations. Finally, reactivity of the metallacyclic {Fe(II)-H} complex with CO2 was probed, resulting in a pair of isomeric ferra(II)lactones.

Water coordinated on Cu(I)-based catalysts is the oxygen source in CO2 reduction to CO

Catalytic reduction of CO₂ over Cu-based catalysts can produce various carbon-based products such as the critical intermediate CO, yet significant challenges remain in shedding light on the underlying mechanisms. Here, we develop a modified triple-stage quadrupole mass spectrometer to monitor the reduction of CO₂ to CO in the gas phase online. Our experimental observations reveal that the coordinated H₂O on Cu(I)-based catalysts promotes CO₂ adsorption and reduction to CO, and the resulting efficiencies are two orders of magnitude higher than those without H₂O. Isotope-labeling studies render compelling evidence that the O atom in produced CO originates from the coordinated H₂O on catalysts, rather than CO₂ itself. Combining experimental observations and computational calculations with density functional theory, we propose a detailed reaction mechanism of CO₂ reduction to CO over Cu(I)-based catalysts with coordinated H₂O. This study offers an effective method to reveal the vital roles of H₂O in promoting metal catalysts to CO₂ reduction.

Understanding the underlying mechanisms for catalytic reduction of CO₂ over Cu based catalysts remains challenging. Here, the authors develop an effective method to reveal the vital roles of H₂O in promoting metal catalysts to CO₂ reduction via a modified triple stage quadrupole mass spectrometer.

Dissection of Light-Induced Charge Accumulation at a Highly Active Iron Porphyrin: Insights in the Photocatalytic CO2 Reduction

Iron porphyrins are among the best molecular catalysts for the electrocatalytic CO₂ reduction reaction. Powering these catalysts with the help of photosensitizers comes along with a couple of unsolved challenges that need to be addressed with much vigor. We have designed an iron porphyrin catalyst decorated with urea functions (UrFe) acting as a multipoint hydrogen bonding scaffold towards the CO₂ substrate. We found a spectacular photocatalytic activity reaching unreported TONs and TOFs as high as 7270 and 3720 h^-1 , respectively. While the Fe⁰ redox state has been widely accepted as the catalytically active species, we show here that the Fe^I species is already involved in the CO₂ activation, which represents the rate-determining step in the photocatalytic cycle. The urea functions help to dock the CO₂ upon photocatalysis. DFT calculations bring support to our experimental findings that constitute a new paradigm in the catalytic reduction of CO₂ .

One-Pot Synthesis of Dimethyl Carbonate over a Binary Catalyst of an Ionic Liquid and an Alkali Carbonate under Low Pressure

A mild and highly efficient approach has been developed for the one-pot synthesis of dimethyl carbonate (DMC) from epoxide, carbon dioxide, and methanol under low initial pressure. The key to the successful transformation is the use of a bicomponent catalytic system composed of a hydroxyl-functionalized ionic liquid and an alkali carbonate. This bicomponent catalytic system demonstrated excellent reusability in four runs. Under the optimal reaction conditions, a 64% yield of DMC from propylene oxide and an 81% yield of DMC from ethylene oxide were obtained.

First Phenol Carboxylation with CO2 on Carbon Nanostructured C@Fe-Al2O3 Hybrids in Aqueous Media under Mild Conditions

Novel hybrid materials with integrated catalytic properties and hydrophobic response, C@Fe–Al₂O₃ hybrid samples, were presented and tested as catalysts for phenol reaction in aqueous solutions at atmospheric pressure and mild temperature conditions, using CO₂ as a feedstock. A series of carbon-coated γ-alumina pellets (C@Fe–Al₂O₃) were synthesized and characterized by TGA, Brunauer–Emmett–Teller (BET) method, Raman spectroscopy, SEM, TEM, and XPS in order to get comprehensive knowledge of their properties at the nanoscale and relate them with their catalytic behavior. The results obtained correlated their catalytic activities with their carbon surface compositions. The application of these materials as active catalysts in the Kolbe–Schmitt reaction for CO₂ conversion in aqueous media was proposed as an alternative reaction for the valorization of exhausts industrial effluents. In these early tests, the highest conversion of phenol was observed for the hybrid samples with the highest graphitic characteristic and the most hydrophobic behavior. Carboxylation products such as benzoic acid, p-hydroxybenzoic acid, and salicylic acid, have been identified under these experimental conditions.