1
|
Sugie S, Maeda H. Conversion of rice husks into carbonaceous materials with porous structures via hydrothermal process. ENVIRONMENTAL SCIENCE AND POLLUTION RESEARCH INTERNATIONAL 2024; 31:45711-45717. [PMID: 38977551 PMCID: PMC11269380 DOI: 10.1007/s11356-024-34217-6] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Grants] [Track Full Text] [Subscribe] [Scholar Register] [Received: 05/10/2024] [Accepted: 06/29/2024] [Indexed: 07/10/2024]
Abstract
Carbonaceous materials hydrothermally produced using waste biomass have small specific surface areas (SSA) and poor porosity properties. In this study, we prepare a novel carbonaceous material with excellent porosity properties by suppressing the formation of a secondary char phase (spheres) and promoting biomass hydrolysis by controlling the hydrothermal conditions. Rice husk powders, as the starting material, are hydrothermally treated using acidic solvents of different types and concentrations at 180 °C. The surfaces of the samples hydrothermally prepared using the acidic solvents have no spheres. In the case of 0.1-0.2 mol L-1 hydrochloric acid (HA), the amorphous carbonaceous materials contain numerous mesopores and exhibit a larger SSA (approximately 100 m2 g-1) than those prepared using acetic acid and distilled water. An increase in the hydrothermal temperature reduces the porosity properties of the materials. Finally, the high-porosity amorphous carbonaceous material showed excellent trimethylamine adsorption ability.
Collapse
Affiliation(s)
- Sayaka Sugie
- Department of Life Science and Applied Chemistry, Nagoya Institute of Technology, Gokiso-Cho, Showa-Ku, Nagoya, 466-8555, Japan
| | - Hirotaka Maeda
- Department of Life Science and Applied Chemistry, Nagoya Institute of Technology, Gokiso-Cho, Showa-Ku, Nagoya, 466-8555, Japan.
| |
Collapse
|
2
|
Mahmood Al-Nuaimy MN, Azizi N, Nural Y, Yabalak E. Recent advances in environmental and agricultural applications of hydrochars: A review. ENVIRONMENTAL RESEARCH 2024; 250:117923. [PMID: 38104920 DOI: 10.1016/j.envres.2023.117923] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Received: 06/07/2023] [Revised: 11/27/2023] [Accepted: 12/09/2023] [Indexed: 12/19/2023]
Abstract
Hydrochar is a carbonaceous material that is generated through the process of hydrothermal carbonization (HTC) from biomass, which has garnered considerable attention in recent years owing to its potential applications in a diverse range of fields, such as environmental remediation and agriculture. Hydrochar is produced from a diverse range of biomass waste materials and retains exceptional properties, including high carbon content, stability, and surface area, making it an optimal candidate for various enviro-agricultural applications. Moreover, it delves into the production process of hydrochar, with explicit emphasis on the optimization of certain properties during the production of hydrochar from bio-waste. Furthermore, the potential of hydrochar as an adsorbent and catalyst support for heavy metals and dyes was extensively explored, along with a soil remediation potential that can improve the physical, chemical and biological properties of soil. This comprehensive review aims to provide a thorough overview of hydrochar with a particular focus on its production, properties, and prospective applications. The significance of hydrochar is accentuated and the growing need for alternative sources of energy and materials that are environmentally sustainable is highlighted in this paper. Besides, the consequence of hydrochar on soil properties such as water-holding capacity, nutrient retention, and total soil porosity, as well as its influence on soil chemical properties such as cation exchange capacity, electrical conductivity, and surface functionality is scrutinized.
Collapse
Affiliation(s)
| | - Nangyallai Azizi
- Department of Analytical Chemistry, Faculty of Pharmacy, Mersin University, Mersin, Turkey
| | - Yahya Nural
- Department of Analytical Chemistry, Faculty of Pharmacy, Mersin University, Mersin, Turkey
| | - Erdal Yabalak
- Department of Nanotechnology and Advanced Materials, Mersin University, Mersin, Turkey; Department of Chemistry and Chemical Processing Technologies, Technical Science Vocational School, Mersin University, 33343, Mersin, Turkey.
| |
Collapse
|
3
|
Efremenko E, Stepanov N, Senko O, Lyagin I, Maslova O, Aslanli A. Artificial Humic Substances as Biomimetics of Natural Analogues: Production, Characteristics and Preferences Regarding Their Use. Biomimetics (Basel) 2023; 8:613. [PMID: 38132553 PMCID: PMC10742262 DOI: 10.3390/biomimetics8080613] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [Grants] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 11/08/2023] [Revised: 12/12/2023] [Accepted: 12/13/2023] [Indexed: 12/23/2023] Open
Abstract
Various processes designed for the humification (HF) of animal husbandry wastes, primarily bird droppings, reduce their volumes, solve environmental problems, and make it possible to obtain products with artificially formed humic substances (HSs) as analogues of natural HSs, usually extracted from fossil sources (coal and peat). This review studies the main characteristics of various biological and physicochemical methods of the HF of animal wastes (composting, anaerobic digestion, pyrolysis, hydrothermal carbonation, acid or alkaline hydrolysis, and subcritical water extraction). A comparative analysis of the HF rates and HS yields in these processes, the characteristics of the resulting artificial HSs (humification index, polymerization index, degree of aromaticity, etc.) was carried out. The main factors (additives, process conditions, waste pretreatment, etc.) that can increase the efficiency of HF and affect the properties of HSs are highlighted. Based on the results of chemical composition analysis, the main trends and preferences with regard to the use of HF products as complex biomimetics are discussed.
Collapse
Affiliation(s)
- Elena Efremenko
- Faculty of Chemistry, Lomonosov Moscow State University, Lenin Hills 1/3, Moscow 119991, Russia; (N.S.); (O.S.)
| | | | | | | | | | | |
Collapse
|
4
|
Cavali M, Libardi Junior N, de Sena JD, Woiciechowski AL, Soccol CR, Belli Filho P, Bayard R, Benbelkacem H, de Castilhos Junior AB. A review on hydrothermal carbonization of potential biomass wastes, characterization and environmental applications of hydrochar, and biorefinery perspectives of the process. THE SCIENCE OF THE TOTAL ENVIRONMENT 2023; 857:159627. [PMID: 36280070 DOI: 10.1016/j.scitotenv.2022.159627] [Citation(s) in RCA: 35] [Impact Index Per Article: 35.0] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Received: 07/22/2022] [Revised: 10/17/2022] [Accepted: 10/18/2022] [Indexed: 06/16/2023]
Abstract
It is imperative to search for appropriate processes to convert wastes into energy, chemicals, and materials to establish a circular bio-economy toward sustainable development. Concerning waste biomass valorization, hydrothermal carbonization (HTC) is a promising route given its advantages over other thermochemical processes. From that perspective, this article reviewed the HTC of potential biomass wastes, the characterization and environmental utilization of hydrochar, and the biorefinery potential of this process. Crop and forestry residues and sewage sludge are two categories of biomass wastes (lignocellulosic and non-lignocellulosic, respectively) readily available for HTC or even co-hydrothermal carbonization (Co-HTC). The temperature, reaction time, and solid-to-liquid ratio utilized in HTC/Co-HTC of those biomass wastes were reported to range from 140 to 370 °C, 0.05 to 48 h, and 1/47 to 1/1, respectively, providing hydrochar yields of up to 94 % according to the process conditions. Hydrochar characterization by different techniques to determine its physicochemical properties is crucial to defining the best applications for this material. In the environmental field, hydrochar might be suitable for removing pollutants from aqueous systems, ameliorating soils, adsorbing atmospheric pollutants, working as an energy carrier, and performing carbon sequestration. But this material could also be employed in other areas (e.g., catalysis). Regarding the effluent from HTC/Co-HTC, this byproduct has the potential for serving as feedstock in other processes, such as anaerobic digestion and microalgae cultivation. These opportunities have aroused the industry interest in HTC since 2010, and the number of industrial-scale HTC plants and patent document applications has increased. The hydrochar patents are concentrated in China (77.6 %), the United States (10.6 %), the Republic of Korea (3.5 %), and Germany (3.5 %). Therefore, considering the possibilities of converting their product (hydrochar) and byproduct (effluent) into energy, chemicals, and materials, HTC or Co-HTC could work as the first step of a biorefinery. And this approach would completely agree with circular bioeconomy principles.
Collapse
Affiliation(s)
- Matheus Cavali
- Department of Sanitary and Environmental Engineering, Federal University of Santa Catarina, 88040-970 Florianópolis, Santa Catarina, Brazil.
| | - Nelson Libardi Junior
- Department of Sanitary and Environmental Engineering, Federal University of Santa Catarina, 88040-970 Florianópolis, Santa Catarina, Brazil
| | - Julia Dutra de Sena
- Department of Sanitary and Environmental Engineering, Federal University of Santa Catarina, 88040-970 Florianópolis, Santa Catarina, Brazil
| | - Adenise Lorenci Woiciechowski
- Department of Bioprocess Engineering and Biotechnology, Federal University of Paraná, 81531-908 Curitiba, Paraná, Brazil
| | - Carlos Ricardo Soccol
- Department of Bioprocess Engineering and Biotechnology, Federal University of Paraná, 81531-908 Curitiba, Paraná, Brazil
| | - Paulo Belli Filho
- Department of Sanitary and Environmental Engineering, Federal University of Santa Catarina, 88040-970 Florianópolis, Santa Catarina, Brazil
| | - Rémy Bayard
- DEEP (Déchets Eaux Environnement Pollutions) Laboratory, National Institute of Applied Sciences of Lyon, 69100 Villeurbanne, France
| | - Hassen Benbelkacem
- DEEP (Déchets Eaux Environnement Pollutions) Laboratory, National Institute of Applied Sciences of Lyon, 69100 Villeurbanne, France
| | - Armando Borges de Castilhos Junior
- Department of Sanitary and Environmental Engineering, Federal University of Santa Catarina, 88040-970 Florianópolis, Santa Catarina, Brazil
| |
Collapse
|
5
|
Sultana AI, Chambers C, Ahmed MMN, Pathirathna P, Reza T. Multifunctional Loblolly Pine-Derived Superactivated Hydrochar: Effect of Hydrothermal Carbonization on Hydrogen and Electron Storage with Carbon Dioxide and Dye Removal. NANOMATERIALS (BASEL, SWITZERLAND) 2022; 12:3575. [PMID: 36296764 PMCID: PMC9606919 DOI: 10.3390/nano12203575] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Figures] [Subscribe] [Scholar Register] [Received: 09/28/2022] [Revised: 10/09/2022] [Accepted: 10/11/2022] [Indexed: 06/16/2023]
Abstract
Pore modulation via hydrothermal carbonization (HTC) needs investigation due to its crucial effect on surface that influences its multirole utilization of such ultraporous sorbents in applications of energy storage- hydrogen and capacitive- as well as for pollutant abatement- carbon capture and dye removal. Hence, loblolly pine was hydrothermally carbonized followed by KOH activation to synthesize superactivated hydrochars (SAH). The resulting SAHs had specific surface area (SSA) 1462-1703 m2/g, total pore (TPV) and micropore volume (MPV) of 0.62-0.78 cm3/g and 0.33-0.49 cm3/g, respectively. The SAHs exhibit excellent multifunctional performance with remarkably high atmospheric CO2 capture of 145.2 mg/g and high pressure cryogenic H2 storage of 54.9 mg/g. The fabricated supercapacitor displayed substantial specific capacitance value of maximum 47.2 Fg-1 at 1 A g-1 in 6 M KOH and highest MB dye removal of 719.4 mg/g. Higher HTC temperature resulted in increased surface porosity as higher SSA, TPV benefitted H2 storage and MB dye removal while superior MPV favored CO2 capture. Moderate HTC temperature ensured higher mesopore-to-macropore volume ratio favoring electrochemical performance. Isotherm modelling of the adsorbates was compared using models: Langmuir, Freundlich, Langmuir- Freundlich and Temkin.
Collapse
|
6
|
Padhye LP, Bandala ER, Wijesiri B, Goonetilleke A, Bolan N. Hydrochar: A Promising Step Towards Achieving a Circular Economy and Sustainable Development Goals. FRONTIERS IN CHEMICAL ENGINEERING 2022. [DOI: 10.3389/fceng.2022.867228] [Citation(s) in RCA: 1] [Impact Index Per Article: 0.5] [Reference Citation Analysis] [Abstract] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 12/12/2022] Open
Abstract
The United Nations 17 Sustainable Development Goals (SDGs) are a universal call to action to end poverty, protect the environment, and improve the lives and prospects of everyone on this planet. However, progress on SDGs is currently lagging behind its 2030 target. The availability of water of adequate quality and quantity is considered as one of the most significant challenges in reaching that target. The concept of the ‘Circular Economy’ has been termed as a potential solution to fasten the rate of progress in achieving SDGs. One of the promising engineering solutions with applications in water treatment and promoting the concept of the circular economy is hydrochar. Compared to biochar, hydrochar research is still in its infancy in terms of optimization of production processes, custom design for specific applications, and knowledge of its water treatment potential. In this context, this paper critically reviews the role of hydrochar in contributing to achieving the SDGs and promoting a circular economy through water treatment and incorporating a waste-to-value approach. Additionally, key knowledge gaps in the production and utilization of engineered hydrochar are identified, and possible strategies are suggested to further enhance its water remediation potential and circular economy in the context of better natural resource management using hydrochar. Research on converting different waste biomass to valuable hydrochar based products need further development and optimization of parameters to fulfil its potential. Critical knowledge gaps also exist in the area of utilizing hydrochar for large-scale drinking water treatment to address SDG-6.
Collapse
|
7
|
Zhu K, Liu Q, Dang C, Li A, Zhang L. Valorization of hydrothermal carbonization products by anaerobic digestion: Inhibitor identification, biomethanization potential and process intensification. BIORESOURCE TECHNOLOGY 2021; 341:125752. [PMID: 34419878 DOI: 10.1016/j.biortech.2021.125752] [Citation(s) in RCA: 1] [Impact Index Per Article: 0.3] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Received: 07/04/2021] [Revised: 08/06/2021] [Accepted: 08/07/2021] [Indexed: 06/13/2023]
Abstract
Integrating hydrothermal carbonization (HTC) and anaerobic digestion for biorefinery-oriented full utilization of wet organic wastes is a promising emerging technology. The objectives of this study were to identify the potential inhibitory substances, evaluate the biomethane potential of mixed and aqueous products and explore process intensifying strategies. The results indicated that the high HTC temperature of 240 °C resulted in a significantly low methane yield of 60 ± 5 mL/g COD and a high Short chain fatty acid (SCFAs) accumulation of 4174 ± 76 mg/L. GC-MS analysis showed that the contents of inhibitory pyrazines, pyridines and ketones in aqueous fraction at 240 °C substantially increased from 13.14%, 0.4%, 0.55% at 180 °C to 23.34%, 2.89%, 5.13%, respectively. When the aqueous products obtained from 240 °C-HTC was supplemented or pretreated by carbonaceous material, the methane yields were greatly improved and increased to 1.3-fold and 1.8-fold, respectively. These finding could provide some valuable technical information for HTC based biorefinery of organic waste.
Collapse
Affiliation(s)
- Kongyun Zhu
- Key Laboratory of Industrial Ecology and Environmental Engineering, School of Environmental Science and Technology, Dalian University of Technology, Linggong Road 2, Dalian 116024, PR China
| | - Qiutong Liu
- Key Laboratory of Industrial Ecology and Environmental Engineering, School of Environmental Science and Technology, Dalian University of Technology, Linggong Road 2, Dalian 116024, PR China
| | - Chao Dang
- Key Laboratory of Industrial Ecology and Environmental Engineering, School of Environmental Science and Technology, Dalian University of Technology, Linggong Road 2, Dalian 116024, PR China
| | - Aimin Li
- Key Laboratory of Industrial Ecology and Environmental Engineering, School of Environmental Science and Technology, Dalian University of Technology, Linggong Road 2, Dalian 116024, PR China
| | - Lei Zhang
- Key Laboratory of Industrial Ecology and Environmental Engineering, School of Environmental Science and Technology, Dalian University of Technology, Linggong Road 2, Dalian 116024, PR China.
| |
Collapse
|
8
|
Microwave Synthesis of MnO2-Lignin Composite Electrodes for Supercapacitors. JOURNAL OF COMPOSITES SCIENCE 2021. [DOI: 10.3390/jcs5080216] [Citation(s) in RCA: 3] [Impact Index Per Article: 1.0] [Reference Citation Analysis] [Abstract] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 11/16/2022]
Abstract
The demand for energy storage devices made from biodegradable materials has increased significantly due to sustainability. Currently, such devices possess vital issues, such as high manufacturing costs and toxicity, low reliability, as well as poor electrochemical performance. In this research, microwave synthesis was conducted to fabricate a low-cost, high-performing, plant-based electroactive material. MnO2 microparticles fabricated via microwave irradiation were deposited on two plant-based materials as substrates made of Al/lignin and Al/AC/lignin. The quasi-solid-state supercapacitors were assembled using a polymeric gel electrolyte of PVA/H3PO4. Scanning electron microscopy was performed to examine the polydispersity, morphology, and porosity of the micro-MnO2 deposited materials. FTIR and UV-vis spectroscopy were performed to study the composition and verify deposition of micro-MnO2 on the lignin-based matrixes. Cyclic voltammetry (CV) was employed to study the polarization resistance of the system. The cyclic charge-discharge (CCD) and electrochemical impedance spectroscopy (EIS) were performed to observe cyclic performance and interfacial resistances. Electrochemical tests showed that after 700 cycles of charge-discharge, both the supercapacitors exhibited high capacitance retention above 90%. Compared to the existing technology, this method enables consistent material structurization with tunable properties due to the controlled heating time and exposure to radiation with minimal waste. This work provides an alternative approach to synthesize low-cost and scalable green composite electrodes for flexible supercapacitors.
Collapse
|
9
|
Abstract
Recently, due to the escalating usage of non-renewable fossil fuels such as coal, natural gas and petroleum coke in electricity and power generation, and associated issues with pollution and global warming, more attention is being paid to finding alternative renewable fuel sources. Thermochemical and hydrothermal conversion processes have been used to produce biochar and hydrochar, respectively, from waste renewable biomass. Char produced from the thermochemical and hydrothermal decomposition of biomass is considered an environmentally friendly replacement for solid hydrocarbon materials such as coal and petroleum coke. Unlike thermochemically derived biochar, hydrochar has received little attention due to the lack of literature on its production technologies, physicochemical characterization, and applications. This review paper aims to fulfill these objectives and fill the knowledge gaps in the literature relating to hydrochar. Therefore, this review discusses the most recent studies on hydrochar characteristics, reaction mechanisms for char production technology such as hydrothermal carbonization, as well as hydrochar activation and functionalization. In addition, the applications of hydrochar, mainly in the fields of agriculture, pollutant adsorption, catalyst support, bioenergy, carbon sequestration, and electrochemistry are reviewed. With advancements in hydrothermal technologies and other environmentally friendly conversion technologies, hydrochar appears to be an appealing bioresource for a wide variety of energy, environmental, industrial, and commercial applications.
Collapse
|
10
|
Zubaidah S, Putri Hartoyo AP, Sihombing JK, Herliyana EN, Darmawan S, Sari NR, Prabowo MNI, Hermawan I, Maulida I, Solikhin A. Oil palm empty fruit bunch valorization for activated and non-activated carbon nanoparticles and its heavy-metal-removal efficiency. WATER SCIENCE AND TECHNOLOGY : A JOURNAL OF THE INTERNATIONAL ASSOCIATION ON WATER POLLUTION RESEARCH 2021; 83:2652-2668. [PMID: 34115620 DOI: 10.2166/wst.2021.166] [Citation(s) in RCA: 4] [Impact Index Per Article: 1.3] [Reference Citation Analysis] [Abstract] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 06/12/2023]
Abstract
In this study, we examined activated and non-activated carbon nanoparticles (CNPs) derived from oil palm empty fruit bunch (OPEFB) fibers for their nanomaterial characteristics and their potential effectiveness in heavy metal removal. To investigate these properties, transmission electron microscopy, scanning electron microscopy (SEM), EDX, Fourier transform infrared spectroscopy, particle size analysis, X-ray diffraction, and atomic absorption spectrophotometry were employed. This study shows that both the activated and the non-activated CNPs were in the form of well-dispersed and aggregated particles. As analyzed using SEM, the external surfaces of the non-activated CNPs were determined to be irregular, while those of the activated CNPs had a more circular shape without aggregation. Carbon was the most dominant element observed in these CNPs, and the occurrence of its activation process altered the chemical functional groups of the non-activated CNPs by shifting their wavenumbers and intensities. Additionally, the activation process increased the crystallinity domain in the activated CNPs. OPEFB fibers could be valorized to obtain both activated and non-activated CNPs that had the potential efficiency to remove heavy metals, including copper (Cu), lead (Pb), iron (Fe), and zinc (Zn) at certain times. Based on the analysis of the Langmuir and Freundlich models, the activated and non-activated CNPs were found to have shown favorable adsorption to Cu, Pb, and Fe, with a percentage of heavy metal removal of over 84%. The adsorption of heavy metals was carried out via a chemical process.
Collapse
Affiliation(s)
- Salma Zubaidah
- Silviculture Department, Faculty of Forestry and Environment, Bogor Agricultural University (IPB University), Bogor, West Java, Indonesia
| | - Adisti Permatasari Putri Hartoyo
- Silviculture Department, Faculty of Forestry and Environment, Bogor Agricultural University (IPB University), Bogor, West Java, Indonesia
| | - Januard Kristian Sihombing
- Silviculture Department, Faculty of Forestry and Environment, Bogor Agricultural University (IPB University), Bogor, West Java, Indonesia
| | - Elis Nina Herliyana
- Silviculture Department, Faculty of Forestry and Environment, Bogor Agricultural University (IPB University), Bogor, West Java, Indonesia
| | - Saptadi Darmawan
- Forest Products Research and Development Center, Ministry of Environment and Forestry, Bogor, West Java, Indonesia
| | - Nela Rahmati Sari
- Forest Products Research and Development Center, Ministry of Environment and Forestry, Bogor, West Java, Indonesia
| | - Muhammad Naufal Ibrahim Prabowo
- Aquatic Resources Management, Faculty of Fisheries and Marine Science, Bogor Agricultural University (IPB University), Bogor, West Java, Indonesia
| | - Imam Hermawan
- Silviculture Department, Faculty of Forestry and Environment, Bogor Agricultural University (IPB University), Bogor, West Java, Indonesia
| | - Isna Maulida
- Silviculture Department, Faculty of Forestry and Environment, Bogor Agricultural University (IPB University), Bogor, West Java, Indonesia
| | - Achmad Solikhin
- Southeast Asia Regional Center for Tropical Biology (SEAMEO BIOTROP), Southeast Asia Minister of Education Organization, Bogor, West Java, Indonesia and Indonesian Green Action Forum (IGAF), Jepara, Central Java, Indonesia E-mail:
| |
Collapse
|