Selective Adsorption of CO2 on Zeolites NaK-ZK-4 with Si/Al of 1.8-2.8

Graphene-Based Composite for Carbon Capture

The current energy system is based largely on fossil fuels that emit carbon dioxide (CO2) and contribute to global climate change. Global energy demand is expected to increase, with growth approximately doubled by the year 2050 and tripled by the end of the century. Therefore, research and development on emissions management and carbon cycle solutions that meet energy sustainability is critical to reduce the effects of global warming. The key point of this literature review is the selection of suitable materials for carbon capture. The selection is based on the consideration that the CO2 reduction properties are influenced by the type of material/composite that is being used, the preparation, and the possible characterization method. This Review covers graphene-based materials and their composites as appropriate materials for reducing CO2 and their performance assessment through experiments and theoretical analysis. It is very important to improve the efficiency performance of materials and its scalability. Recently, graphene has become a widely used material for environmental applications, one of which shows good performance in reducing CO2 concentration. To separate CO2, graphene has been developed and is now being showcased and reviewed in this study. Given the measuring technique used, this Review is intended to be a valuable resource for individuals researching CO2 separation employing graphene material in combination with other materials.

Dual-Tuning Azole-Based Ionic Liquids for Reversible CO2 Capture from Ambient Air

A strategy of tuning azole-based ionic liquids for reversible CO2 capture from ambient air was reported. Through tuning the basicity of anion as well as the type of cation, an ideal azole-based ionic liquid with both high CO2 capacity and excellent stability was synthesized, which exhibited a highest single-component isotherm uptake of 2.17 mmol/g at the atmospheric CO2 concentration of 0.4 mbar at 30 °C, even in the presence of water. The bound CO2 can be released by relatively mild heating of the IL-CO2 at 80 °C, which makes it promising for energy-efficient CO2 desorption and sorbent regeneration, leading to excellent reversibility. To the best of our knowledge, these azole-based ionic liquids are superior to other adsorbent materials for direct air capture due to their dual-tunable properties and high CO2 capture efficiency, offering a new prospect for efficient and reversible direct air capture technologies.

Improving the efficiency of 4A-zeolite synthesized from kaolin by amine functionalization for CO2 capture

This study focuses on optimizing the CO2 adsorption capacity of 4A-zeolite synthesized from kaolin by employing structural modifications through impregnation with tetraethylenepentamine (TEPA) and diethanolamine (DEA). Various analytical techniques were utilized to evaluate the effectiveness of these modifications. Design expert software and response surface methodology (RSM) was employed for data analysis and operational variable optimization, leading to improved CO2 adsorption performance of the modified zeolites. The adsorption capacity of the modified zeolites was assessed under different temperatures, pressures, and amine concentrations using a test device. The optimal adsorption capacity of 4A-DEA adsorbent is found to be 579.468 mg/g, with the optimal operational variables including a temperature of 25.270 °C, pressure of 8.870 bar, and amine concentration of 11.112 wt%. The analysis shows that the adsorption process involves both physisorption and chemisorption, and the best kinetic model is the fractional-factor model.

Monomer Symmetry-Regulated Defect Engineering: In Situ Preparation of Functionalized Covalent Organic Frameworks for Highly Efficient Capture and Separation of Carbon Dioxide

Developing crystalline porous materials with highly efficient CO₂ selective adsorption capacity is one of the key challenges to carbon capture and storage (CCS). In current studies, much more attention has been paid to the crystalline and porous properties of crystalline porous materials for CCS, while the defects, which are unavoidable and ubiquitous, are relatively neglected. Herein, for the first time, we propose a monomer-symmetry regulation strategy for directional defect release to achieve in situ functionalization of COFs while exposing uniformly distributed defect-aldehyde groups as functionalization sites for selective CO₂ capture. The regulated defective COFs possess high crystallinity, good structural stability, and a large number of organized and functionalized aldehyde sites, which exhibit one of the highest selective separation values of all COF sorbing materials in CO₂/N₂ selective adsorption (128.9 cm³/g at 273 K and 1 bar, selectivity: 45.8 from IAST). This work not only provides a new strategy for defect regulation and in situ functionalization of COFs but also provides a valuable approach in the design and preparation of new adsorbents for CO₂ adsorption and CO₂/N₂ selective separation.

Tuning of Microenvironment in Covalent Organic Framework via Fluorination Strategy promotes Selective CO2 Capture

Herein, we have designed and synthesized two heteroatom (N, O) rich covalent organic frameworks (COF), PD-COF and TF-COF, respectively, to demonstrate their relative effect on CO₂ adsorption capacity and also CO₂ /N₂ selectivity. Compared to the non-fluorinated PD-COF (BET surface area 805 m²  g^-1 , total pore volume 0.3647 ccg^-1 ), a decrease in BET surface area and also pore volume have been observed for fluorinated TF-COF due to the incorporation of fluorine to the porous framework (BET surface area 451 m²  g^-1 , total pore volume 0.2978 ccg^-1 ). This fact leads to an enormous decrease in the CO₂ adsorption capacity and CO₂ /N₂ selectivity of TF-COF, though it shows stronger affinity towards CO₂ with a Qst of 37.76 KJ/mol. The more CO₂ adsorption capacity by PD-COF can be attributed to the large specific surface area with considerable amount of micropore volume compared to the TF-COF. Further, PD-COF exhibited CO₂ /N₂ selectivity of 16.8, higher than that of TF-COF (CO₂ /N₂ selectivity 13.4).

Carbon dioxide capture with zeotype materials

This review describes the application of zeotype materials for the capture of CO2 in different scenarios, the critical parameters defining the adsorption performances, and the challenges of zeolitic adsorbents for CO2 capture.