Cyclometalated Iridium Complex-Catalyzed N-Alkylation of Amines with Alcohols via Borrowing Hydrogen in Aqueous Media

A sustainable strategic approach for N-alkylation of amines with activation of alcohols triggered via a hydrogen auto-transfer reaction using a Pd(II) complex: evidence for metal-ligand cooperativity

This work describes a new well-defined, air-stable, phosphine free palladium(II) [Pd(L)Cl] (1) catalyst. This catalyst was utilized for N-alkylation of amines and indole synthesis where H2O was found to be the by-product. A broad range of aromatic amines were alkylated using this homogeneous catalyst with a catalyst loading of 0.1 mol%. Greener aromatic and aliphatic primary alcohols were utilized and a hydrogen auto-transfer strategy via a metal-ligand cooperative approach was investigated. The precursor of the antihistamine-containing drug molecule tripelennamine was synthesized on a gram scale for large-scale applicability of the current synthetic methodology. A number of control experiments were performed to investigate the possible reaction pathway and the outcomes of these experiments indicated the azo-chromophore as a hydrogen reservoir during the catalytic cycle.

Benzimidazol-2-ylidene ruthenium complexes for C-N bond formation through alcohol dehydrogenation

A low temperature hydrogen borrowing approach to generate secondary amines using benzimidazole-based N-heterocyclic carbene (BNHC) ruthenium complexes is reported. A series of the piano-stool complexes of the type [(η6-p-cymene)(BNHC)RuCl2] (1a-g) were synthesized via one-pot reaction of the NHC salt precursor, Ag2O, and [RuCl2(p-cymene)]2 and characterized using conventional spectroscopic techniques. The geometry of two precursors, [(η6-p-cymene)(Me4BnMe2BNHCCH2OxMe)RuCl2] (1f) and [(η6-p-cymene)(Me5BnMe2BNHCCH2OxMe)RuCl2] (1g), was studied by single crystal X-ray diffraction. These catalysts were found to dehydrogenate alcohols efficiently at temperatures as low as 50 °C to allow Schiff-base condensation and subsequent imine hydrogenation to afford secondary amines. Notably, this ruthenium-based procedure enables the N-alkylation of aromatic and heteroaromatic primary amines with a wide range of primary alcohols in excellent yields of up to 98%. The present methodology is green and water is liberated as the sole byproduct.

Ionic-Liquid Hydrogen-Bonding Promoted Alcohols Amination over Cobalt Catalyst via Dihydrogen Autotransfer Mechanism

Higher amines are important high-valuable chemicals with wide applications, and amination of alcohols is a green route to them, which however generally suffers from harsh reaction conditions and use of equivalent base. Herein, we report an ionic-liquid (IL) hydrogen-bonding promoted dihydrogen autotransfer strategy for amination of alcohols to higher amines over cobalt catalyst under base-free conditions. Co(BF4 )2  ⋅ 6 H2 O complexed with triphos and IL (e. g., tetrabutylphosphonium tetrafluoroborate, [P4444 ][BF4 ]) shows high performances for the reaction and is tolerant of a wide scope of amines and alcohols, affording higher amines in good to excellent yields. Mechanism investigation indicates that the [BF4 ]- anion activates the alcohol via hydrogen bonding, promoting transfer of both hydroxyl H and α-H atoms of alcohol to the cobalt catalyst to form an aldehyde intermediate and cobalt dihydride complex, which are involved in the subsequent reductive amination. This strategy provides a green and effective route for alcohol amination, which may have promising applications in alcohol-involved alkylation reactions.

Ethanol Upgrading to n-Butanol Using Transition-Metal-Incorporated Poly(triazine)imide Frameworks

The upgrading of ethanol to n-butanol was performed using a molecular catalyst integrated into a carbon nitride support, one of the first examples of a supported molecular catalyst performing the Guerbet process. Initial studies using crystalline poly(triazine)imide (PTI) with lithium or transition-metal cations imbedded in the support together with a base as the catalyst system did not produce any significant amounts of n-butanol. However, when using the catalyst material formed by treatment of PTI-LiCl with [(Cp*)IrCl₂]₂ (Cp* = pentamethylcyclopentadienyl) along with sodium hydroxide, a 59% selectivity for butanol (13% yield) was obtained at 145 °C. This PTI-(Cp*)Ir material exhibited distinct UV-vis absorption features and powder X-ray diffractions which differ from those of the parent PTI-LiCl and [(Cp*)IrCl₂]₂. The PTI-(Cp*)Ir material was found to have a metal loading of 27% iridium per empirical unit of the framework. Along with the formation of n-butanol from the Guerbet reaction, the presence of higher chain alcohols was also observed.

Cyclometalated iridium complexes-catalyzed acceptorless dehydrogenative coupling reaction: construction of quinoline derivatives and evaluation of their antimicrobial activities

The acceptorless dehydrogenative coupling (ADC) reaction is an efficient method for synthesizing quinoline and its derivatives. In this paper, various substituted quinolines were synthesized from 2-aminobenzyl alcohols and aryl/heteroaryl/alkyl secondary alcohols in one pot via a cyclometalated iridium-catalyzed ADC reaction. This method has some advantages, such as easy availability of raw materials, mild reaction conditions, wide range of substrates, and environmental friendliness which conforms to the principles of green chemistry. Furthermore, a gram-scale experiment with low catalyst loading offers the potential to access the aryl/heteroaryl quinolones in suitable amounts. In addition, the antibacterial and antifungal activities of the synthesized quinolines were evaluated in vitro, and the experimental results showed that the antibacterial activities of compounds 3ab, 3ad, and 3ah against Gram-positive bacteria and compound 3ck against C. albicans were better than the reference drug norfloxacin.

Recent advances in C/N-alkylation with alcohols through hydride transfer strategies

This review highlights the most recent reports in three powerful and ever-growing fields of borrowing hydrogen, acceptorless dehydrogenative coupling, and base-mediated hydride transfer strategies; which pave the way for generating reactive intermediates via shuttling hydrogen (or hydride) between starting materials without any need for an external hydrogen source to easily construct more complex structures. There is a thorough focus on diversifying the utility of alcohols for C/N-alkylation leading to the synthesis of branched ketones, alcohols, amines, indols, and 6-membered nitrogen-containing heterocycles such as pyridines and pyrimidines, various transformations with the focus on C-C and C-N bond-forming reactions via metal-based catalysis or metal-free approaches in this context to give a global overview in this area.

Iridium-Catalyzed Stereoselective Transfer Hydrogenation of 1,5-Benzodiazepines

An iridium-catalyzed highly stereoselective transfer hydrogenation of N-protected 2,4-disubstituted-1,5-benzodiazepines as well as dibenzo[1,5]oxa/thiazepines is realized in an aqueous solvent under acidic conditions, with formic acid as the hydride donor. Only trans-products are obtained in all the cases where diastereoselective issues are associated. The catalyst efficiency is highly dependent on the electronic and steric properties of the substrates. Topologically analyzing the angle of attack for hydride delivering revealed, stereoelectronically, that the steric interaction between the N-protecting group and the sterically large iridium hydride intermediate constitutes the main contributor to the excellent stereochemical control. Highly deuterated products can also be accessible with DCO₂D as the deuteride donor. The observed primary kinetic isotope effect (k_H/k_D = 4.24) suggests that the formation of iridium hydride through β-hydride elimination should be the rate-determining step (with C-H bond cleavage). The potential use of the chirally modified iridium catalysts in a chemical resolution of racemic 1,5-benzodiazepines is also conceptually demonstrated.

Water as a solvent: transition metal catalyzed dehydrogenation of alcohols going green

The long-established practice of using organic solvents in synthetic chemistry is currently becoming a major focus of environmental alarms as many of the chemical wastes are generated in the form of organic solvents. Recently, various alternative solvents have been recognized by the scientific community, including water, ionic liquids, supercritical fluids, glycerol, polyethylene glycol, etc. Among these alternatives, water is unquestionably an ideal solvent as it is abundant, cheap, non-toxic, and non-flammable. In the last few decades, a breakthrough has been achieved in the field of transition metal-catalyzed dehydrogenation of alcohols and the related chemistry for the sustainable synthesis of a wide range of valuable compounds. Although a large number of reports with new potential are published every year following this alcohol dehydrogenation strategy, the utilization of water as a solvent in alcohol dehydrogenation and related coupling reactions is yet to be highlighted properly. This review summarizes the advances in metal-catalyzed dehydrogenative functionalization of alcohols using water as a solvent.

Iridium-catalyzed reductive etherification of α,β-unsaturated ketones and aldehydes with alcohols

An iridium complex-catalyzed reductive etherification of α,β-unsaturated ketones and aldehydes with primary alcohols is presented, affording allyl ethers in excellent yields. Deuterated and control experiments showed that this etherification transformation proceeded through a cascade transfer hydrogenation and alcohol condensation process. Moreover, the utility of this protocol is evidenced by the gram-scale performance.

N-Alkylation of organonitrogen compounds catalyzed by methylene-linked bis-NHC half-sandwich ruthenium complexes

An efficient ruthenium-catalyzed N-alkylation of amines, amides and sulfonamides has been developed employing novel pentamethylcyclopentadienylruthenium(II) complexes bearing the methylene linked bis(NHC) ligand bis(3-methylimidazol-2-ylidene)methane. The acetonitrile complex 2 has proven particularly effective with a broad range of substrates with low catalyst loading (0.1-2.5 mol%) and high functional group tolerance under mild conditions. A total of 52 N-alkylated organonitrogen compounds including biologically relevant scaffolds were synthesized from (hetero)aromatic and aliphatic amines, amides and sulfonamides using alcohols or diols as alkylating agents in up to 99% isolated yield, even on gram-scale reactions. In the case of sulfonamides, it is the first example of N-alkylation employing a transition-metal complex bearing NHC ligands.

Iridium/graphene nanostructured catalyst for the N-alkylation of amines to synthesize nitrogen-containing derivatives and heterocyclic compounds in a green process

The unprecedented iridium/graphene nanostructured catalyst directly promotes the formation of C–N bonds without the need for pre-activation steps, solvents, alkalis and other additives.

Coordinatively Unsaturated Hf-MOF-808 Prepared via Hydrothermal Synthesis as a Bifunctional Catalyst for the Tandem N-Alkylation of Amines with Benzyl Alcohol

The modulated hydrothermal (MHT) synthesis of an active and selective Hf-MOF-808 material for the N-alkylation reaction of aniline with benzyl alcohol under base-free mild reaction conditions is reported. Through kinetic experiments and isotopically labeled NMR spectroscopy studies, we have demonstrated that the reaction mechanism occurs via borrowing hydrogen (BH) pathway, in which the alcohol dehydrogenation is the limiting step. The high concentration of defective -OH groups generated on the metallic nodes through MHT synthesis enhances the alcohol activation, while the unsaturated Hf⁴⁺, which acts as a Lewis acid site, is able to borrow the hydrogen from the methylene position of benzyl alcohol. This fact makes this material at least 14 times more active for the N-alkylation reaction than the material obtained via solvothermal synthesis. The methodology described in this work could be applied to a wide range of aniline and benzyl alcohol derivates, showing in all cases high selectivity toward the corresponding N-benzylaniline product. Finally, Hf-MOF-808, which acts as a true heterogeneous catalyst, can be reused in at least four consecutive runs without any activity loss.

pH-Mediated Selective Synthesis of N-Allylic Alkylation or N-Alkylation Amines with Allylic Alcohols via an Iridium Catalyst in Water

Amination of allylic alcohols is an effective approach in the facile synthesis of N-allylic alkylation or N-alkylation amines. Recently, a series of catalysts were devised to push forward this transformation. However, current synthetic methods are typically limited to achieve either N-allylic alkylation or N-alkylation products via a certain catalyst. In this article, a pH-mediated selective synthesis of N-allylic alkylation or N-alkylation amines with allylic alcohols via an iridium catalyst with water as the environmental benign solvent is revealed, enabling the miscellaneous synthesis of N-allylic alkylation and N-alkylation products in outstanding yields. Furthermore, a gram-scale experiment with low catalyst loading offers the potential to access a distinct entry for the synthesis of the antifungal drug naftifine.

Water-promoted dehydrative coupling of 2-aminopyridines in heptane via a borrowing hydrogen strategy

A synthetic method for dehydrative N-benzylation promoted by water molecules in heptane using a π-benzylpalladium system has been developed. The presence of water significantly accelerates carbon–nitrogen bond formation, which is accomplished in an atom-economical process to afford the corresponding N-monobenzylated products. A crossover experiment afforded H/D scrambled products, which is consistent with a borrowing hydrogen mechanism. Kinetic isotope effect measurements revealed that benzylic carbon–hydrogen bond cleavage was the rate-determining step.

We describe a novel strategy for the water-promoted dehydrative coupling reaction in heptane, which offers a sustainable direct amination of alcohols.

Selective N-Alkylation of Amines with DMC over Biogenic Cu-Zr Bimetallic Nanoparticles

Herein, we report the green synthesis of copper-zirconium bimetallic nanoparticles (Cu-Zr BNPs) from aqueous solutions using Azadirachta indica leaf extract as a reducing and stabilizing agent. The CuO, ZrO2 NP, and Cu-Zr BNP samples were characterized by X-ray diffraction and Fourier transform infrared (FTIR) spectroscopy, and the morphologies of the samples were analyzed by high-resolution transmission electron microscopy (HR-TEM) with selected area electron diffraction analysis (SAED). The synthesized Cu-Zr BNPs have been employed as efficient catalysts for the selective N-methylation of aromatic and aliphatic amines with dimethyl carbonate. The effect of process conditions on the percentage conversion of benzylamine with dimethyl carbonate as a model reaction has been investigated. The Cu-Zr bimetallic nanoparticle catalytic system in a 1:2 molar ratio was able to convert amines into the corresponding N-methylated amines with a selectivity up to 91% at 180 °C in 4 h. The analysis of catalytic reusability confirmed that the reported heterogeneous catalyst can be used for five consecutive cycles without much loss in activity. Thus, the current protocol can be considered as a simpler, reproducible, and environmentally benign approach for N-methylation of amines.

Recent advances in pincer-nickel catalyzed reactions

Organometallic catalysts have played a key role in accomplishing numerous synthetically valuable organic transformations that are either otherwise not possible or inefficient. The use of precious, sparse and toxic 4d and 5d metals are an apparent downside of several such catalytic systems despite their immense success over the last several decades. The use of complexes containing Earth-abundant, inexpensive and less hazardous 3d metals, such as nickel, as catalysts for organic transformations has been an emerging field in recent times. In particular, the versatile nature of the corresponding pincer-metal complexes, which offers great control of their reactivity via countless variations, has garnered great interest among organometallic chemists who are looking for greener and cheaper alternatives. In this context, the current review attempts to provide a glimpse of recent developments in the chemistry of pincer-nickel catalyzed reactions. Notably, there have been examples of pincer-nickel catalyzed reactions involving two electron changes via purely organometallic mechanisms that are strikingly similar to those observed with heavier Pd and Pt analogues. On the other hand, there have been distinct differences where the pincer-nickel complexes catalyze single-electron radical reactions. The applicability of pincer-nickel complexes in catalyzing cross-coupling reactions, oxidation reactions, (de)hydrogenation reactions, dehydrogenative coupling, hydrosilylation, hydroboration, C-H activation and carbon dioxide functionalization has been reviewed here from synthesis and mechanistic points of view. The flurry of global pincer-nickel related activities offer promising avenues in catalyzing synthetically valuable organic transformations.

Biorenewable carbon-supported Ru catalyst for N-alkylation of amines with alcohols and selective hydrogenation of nitroarenes

A renewable carbon-supported Ru catalyst (Ru/PNC-700) facilely prepared via simple impregnation followed by the pyrolysis process for N-alkylation of anilines with benzyl alcohol and chemoselective hydrogenation of nitroarenes.