Great Enhancement Effect of 20-40 nm Ag NPs on Solar-Blind UV Response of the Mixed-Phase MgZnO Detector

High performance solar-blind UV detector with Mg0.472Zn0.528O/Mg0.447Zn0.553O double layer structure on MgO substrate

Mg0.472Zn0.528O/Mg0.447Zn0.553O double layer structure UV detectors are made on single structure MgO substrate by PLD method, and the effect of different thickness top MgZnO layer on the UV response characteristics of the detector are studied. Compared with the single layer MgZnO detector that made by Mg0.3Zn0.7O target, the Mg0.472Zn0.528O/Mg0.447Zn0.553O double layer detector with 30 nm top layer, shows much higher deep UV response (21.3 A W-1at 265 nm), much smaller dark current(66.9 pA) and much higher signal-to-noise ratio (2.8 × 105) at 25 V bias voltage. And the device also shows relative high response (23.1 A W-1) at 235 nm deep UV light at 25 V bias voltage, which is mainly attributed by the bottom MgZnO layer with higher Mg composition. When the top layer is 66.7 nm thick, the response of the Mg0.472Zn0.528O/Mg0.447Zn0.553O detector reached 228.8 A W-1at 255 nm under 25 V bias voltage, the signal-to-noise ratio of which is 10573 under 20 V bias voltage, and the near UV response of the device is also big because of more h-MgZnO in top MgZnO layer. When the top layer reached 90.2 nm, there are much more h-MgZnO in the top MgZnO layer, the peak response of the Mg0.472Zn0.528O/Mg0.447Zn0.553O detector is just 6.65 A W-1at 320 nm under 25 V bias voltage, the signal-to-noise ratio of which is 1248. The high Mg composition bottom MgZnO decrease the dark current of the Mg0.472Zn0.528O/Mg0.447Zn0.553O detector, both the 2DEG effect of the double layer structure and the amplify effect of the mix-phase MgZnO top layer, increased theIuvand deep UV response of the Mg0.472Zn0.528O/Mg0.447Zn0.553O detector. Therefore, the double layer Mg0.472Zn0.528O/Mg0.447Zn0.553O detector is more sensitive at faint deep UV light compared with previous reported MgZnO detectors, and the MgxZn1-xO/MgyZn1-yO detector shows similarIuvand signal-noise-ratio at faint deep UV light as high-temperature fabricated AlxGa1-xN/AlyGa1-yN detectors.

Enhanced ultrathin ultraviolet detector based on a diamond metasurface and aluminum reflector

Metasurface is a kind of sub-wavelength artificial electromagnetic structure, which can resonate with the electric field and magnetic field of the incident light, promote the interaction between light and matter, and has great application value and potential in the fields of sensing, imaging, and photoelectric detection. Most of the metasurface-enhanced ultraviolet detectors reported so far are metal metasurfaces, which have serious ohmic losses, and studies on the use of all-dielectric metasurface-enhanced ultraviolet detectors are rare. The multilayer structure of the diamond metasurface-gallium oxide active layer-silica insulating layer-aluminum reflective layer was theoretically designed and numerically simulated. In the case of gallium oxide thickness of 20 nm, the absorption rate of more than 95% at the working wavelength of 200-220 nm is realized, and the working wavelength can be adjusted by changing the structural parameters. The proposed structure has the characteristics of polarization insensitivity and incidence angle insensitivity. This work has great potential in the fields of ultraviolet detection, imaging, and communications.

Microporous poly(glycidyl methacrylate-co-ethylene glycol dimethyl acrylate) microspheres: synthesis, functionalization and applications

As a new kind of functional material, micron-sized porous polymer microspheres are a hot research topic in the field of polymer materials.