Promoting Visible Light Generation of Hydrogen Using a Sol-Gel-Prepared MnCo2O4@g-C3N4 p-n Heterojunction Photocatalyst

Semi-Coherent Heterointerface Engineering via In Situ Phase Transition for Enhanced Sodium/Lithium-Ions Storage

To improve ion transport kinetics and electronic conductivity between the different phases in sodium/lithium-ion battery (LIB/SIB) anodes, heterointerface engineering is considered as a promising strategy due to the strong built-in electric field. However, the lattice mismatch and defects in the interphase structure can lead to large grain boundary resistance, reducing the ion transport kinetics and electronic conductivity. Herein, monometallic selenide Fe3Se4-Fe7Se8 semi-coherent heterointerface embedded in 3D connected Nitrogen-doped carbon yolk-shell matrix (Fe3Se4-Fe7Se8@NC) is obtained via an in situ phase transition process. Such semi-coherent heterointerface between Fe3Se4 and Fe7Se8 shows the matched interfacial lattice and strong built-in electric field, resulting in the low interface impedance and fast reaction kinetics. Moreover, the yolk-shell structure is designed to confine all monometallic selenide Fe3Se4-Fe7Se8 semi-coherent heterointerface nanoparticles, improving the structural stability and inhibiting the volume expansion effect. In particular, the 3D carbon bridge between multi-yolks shell structure improves the electronic conductivity and shortens the ion transport path. Therefore, the efficient reversible pseudocapacitance and electrochemical conversion reaction are enabled by the Fe3Se4-Fe7Se8@NC, leading to the high specific capacity of 439 mAh g-1 for SIB and 1010 mAh g-1 for LIB. This work provides a new strategy for constructing heterointerface of the anode for secondary batteries.

Uptake of BF Dye from the Aqueous Phase by CaO-g-C3N4 Nanosorbent: Construction, Descriptions, and Recyclability

Removing organic dyes from contaminated wastewater resulting from industrial effluents with a cost-effective approach addresses a major global challenge. The adsorption technique onto carbon-based materials and metal oxide is one of the most effective dye removal procedures. The current work aimed to evaluate the application of calcium oxide-doped carbon nitride nanostructures (CaO-g-C3N4) to eliminate basic fuchsine dyes (BF) from wastewater. CaO-g-C3N4 nanosorbent were obtained via ultrasonication and characterized by scanning electron microscopy, X-ray diffraction, TEM, and BET. The TEM analysis reveals 2D nanosheet-like nanoparticle architectures with a high specific surface area (37.31 m2/g) for the as-fabricated CaO-g-C3N4 nanosorbent. The adsorption results demonstrated that the variation of the dye concentration impacted the elimination of BF by CaO-C3N4 while no effect of pH on the removal of BF was observed. Freundlich isotherm and Pseudo-First-order adsorption kinetics models best fitted BF adsorption onto CaO-g-C3N4. The highest adsorption capacity of CaO-g-C3N4 for BF was determined to be 813 mg. g−1. The adsorption mechanism of BF is related to the π-π stacking bridging and hydrogen bond, as demonstrated by the FTIR study. CaO-g-C3N4 nanostructures may be easily recovered from solution and were effectively employed for BF elimination in at least four continuous cycles. The fabricated CaO-g-C3N4 adsorbent display excellent BF adsorption capacity and can be used as a potential sorbent in wastewater purification.