Effect of Sonochemical Treatment on Thermal Stability, Elemental Mercury (Hg0) Removal, and Regenerable Performance of Magnetic Tea Biochar

Recent Developments in Sonochemical Synthesis of Nanoporous Materials

Ultrasounds are commonly used in medical imaging, solution homogenization, navigation, and ranging, but they are also a great energy source for chemical reactions. Sonochemistry uses ultrasounds and thus realizes one of the basic concepts of green chemistry, i.e., energy savings. Moreover, reduced reaction time, mostly using water as a solvent, and better product yields are among the many factors that make ultrasound-induced reactions greener than those performed under conventional conditions. Sonochemistry has been successfully implemented for the preparation of various materials; this review covers sonochemically synthesized nanoporous materials. For instance, sonochemical-assisted methods afforded ordered mesoporous silicas, spherical mesoporous silicas, periodic mesoporous organosilicas, various metal oxides, biomass-derived activated carbons, carbon nanotubes, diverse metal-organic frameworks, and covalent organic frameworks. Among these materials, highly porous samples have also been prepared, such as garlic peel-derived activated carbon with an apparent specific surface area of 3887 m2/g and MOF-177 with an SSA of 4898 m2/g. Additionally, many of them have been examined for practical usage in gas adsorption, water treatment, catalysis, and energy storage-related applications, yielding satisfactory results.

Sonochemical oxidation and stabilization of liquid elemental mercury in water and soil

Over 3000 mercury (Hg)-contaminated sites worldwide contain liquid metallic Hg [Hg(0)_l] representing a continuous source of elemental Hg(0) in the environment through volatilization and solubilization in water. Currently, there are few effective treatment technologies available to remove or sequester Hg(0)_l in situ. We investigated sonochemical treatments coupled with complexing agents, polysulfide and sulfide, in oxidizing Hg(0)_l and stabilizing Hg in water, soil and quartz sand. Results indicate that sonication is highly effective in breaking up and oxidizing liquid Hg(0)_l beads via acoustic cavitation, particularly in the presence of polysulfide. Without complexing agents, sonication caused only minor oxidation of Hg(0)_l but increased headspace gaseous Hg(0)_g and dissolved Hg(0)_aq in water. However, the presence of polysulfide essentially stopped Hg(0) volatilization and solubilization. As a charged polymer, polysulfide was more effective than sulfide in oxidizing Hg(0)_l and subsequently stabilizing the precipitated metacinnabar (β-HgS) nanocrystals. Sonochemical treatments with sulfide yielded incomplete oxidation of Hg(0)_l, likely resulting from the formation of HgS coatings on the dispersed µm-size Hg(0)_l bead surfaces. Sonication with polysulfide also resulted in rapid oxidation of Hg(0)_l and precipitation of HgS in quartz sand and in the Hg(0)_l-contaminated soil. This research indicates that sonochemical treatment with polysulfide could be an effective means in rapidly converting Hg(0)_l to insoluble HgS precipitates in water and sediments, thereby preventing its further emission and release to the environment. We suggest that future studies are performed to confirm its technical feasibility and treatment efficacy for remediation applications.

Elemental mercury (Hg0) removal from coal syngas using magnetic tea-biochar: Experimental and theoretical insights

Mercury is ranked 3^rd as a global pollutant because of its long persistence in the environment. Approximately 65% of its anthropogenic emission (Hg⁰) to the atmosphere is from coal-thermal power plants. Thus, the Hg⁰ emission control from coal-thermal power plants is inevitable. Therefore, multiple sorbent materials were synthesized using a one-step pyrolysis method to capture the Hg⁰ from simulated coal syngas. Results showed, the Hg⁰ removal performance of the sorbents increased by the citric acid/ultrasonic application. T5CUF_0.3 demonstrated the highest Hg⁰ capturing performance with an adsorption capacity of 106.81 µg/g within 60 min at 200 °C under complex simulated syngas mixture (20% CO, 20% H₂, 10 ppmV HCl, 6% H₂O, and 400 ppmV H₂S). The Hg⁰ removal mechanism was proposed, revealing that the chemisorption governs the Hg⁰ removal process. Besides, the active Hg⁰ removal performance is attributed to the high dispersion of valence Fe₃O₄ and lattice oxygen (α) contents over the T5CUF_0.3 surface. In addition, the temperature programmed desorption (TPD) and XPS analysis confirmed that H₂S/HCl gases generate active sites over the sorbent surface, facilitating high Hg⁰ adsorption from syngas. This work represented a facile and practical pathway for utilizing cheap and eco-friendly tea waste to control the Hg⁰ emission.

Nanoarchitectonics and Kinetics Insights into Fluoride Removal from Drinking Water Using Magnetic Tea Biochar

Fluoride contamination in water is a key problem facing the world, leading to health problems such as dental and skeletal fluorosis. So, we used low-cost multifunctional tea biochar (TBC) and magnetic tea biochar (MTBC) prepared by facile one-step pyrolysis of waste tea leaves. The TBC and MTBC were characterized by XRD, SEM, FTIR, and VSM. Both TBC and MTBC contain high carbon contents of 63.45 and 63.75%, respectively. The surface area of MTBC (115.65 m²/g) was higher than TBC (81.64 m²/g). The modified biochar MTBC was further used to remediate the fluoride-contaminated water. The fluoride adsorption testing was conducted using the batch method at 298, 308, and 318 K. The maximum fluoride removal efficiency (E%) using MTBC was 98% when the adsorbent dosage was 0.5 g/L and the fluoride concentration was 50 mg/L. The experiment data for fluoride adsorption on MTBC best fit the pseudo 2nd order, rather than the pseudo 1st order. In addition, the intraparticle diffusion model predicts the boundary diffusion. Langmuir, Freundlich, Temkin, and Dubnin-Radushkevich isotherm models were fitted to explain the fluoride adsorption on MTBC. The Langmuir adsorption capacity of MTBC = 18.78 mg/g was recorded at 298 K and decreased as the temperature increased. The MTBC biochar was reused in ten cycles, and the E% was still 85%. The obtained biochar with a large pore size and high removal efficiency may be an effective and low-cost adsorbent for treating fluoride-containing water.

Ultrasonic Activated Biochar and Its Removal of Harmful Substances in Environment

Biochar has been widely used in the fields of environment and energy, and green preparation can make biochar-based materials more environmentally friendly. Particularly, in the low-temperature pyrolysis of biochar, labile C with low biological toxicity is the main influencing factor of bacteria in soil. Therefore, it is worth studying to develop the fabrication technology of low-temperature pyrolysis biochar with rich pore structure. The mechanical effect of ultrasonic cavitation is considered to be an effective strategy for the preparation of biochar. However, the sonochemical effects on biochar remain to be studied. In this review, ultrasonic modification and ultrasonic-chemical modification on biochar has been reviewed. Metal oxide/biochar composites can also be obtained by an ultrasonic-chemical method. It is worth mentioning that there have been some reports on the regeneration of biochar by ultrasound. In addition to ultrasonic preparation of biochar, ultrasound can also trigger the sonocatalytic performance and promote the adsorption ability of biochar for the removal of harmful substances. The catalytic mechanism of ultrasound/biochar needs to be further investigated. For application, biochar prepared by ultrasound has been used for the removal of heavy metals in water, the adsorption of carbon dioxide, and soil remediation.

Cadmium Stabilization and Redox Transformation Mechanism in Maize Using Nanoscale Zerovalent-Iron-Enriched Biochar in Cadmium-Contaminated Soil

Cadmium (Cd) is a readily available metal in the soil matrix, which obnoxiously affects plants and microbiota; thus, its removal has become a global concern. For this purpose, a multifunctional nanoscale zerovalent-iron enriched biochar (nZVI/BC) was used to alleviate the Cd-toxicity in maize. Results revealed that the nZVI/BC application significantly enhanced the plant growth (57%), chlorophyll contents (65%), intracellular permeability (61%), and biomass production index (76%) by restraining Cd uptake relative to Cd control. A Cd stabilization mechanism was proposed, suggesting that high dispersion of organic functional groups (C-O, C-N, Fe-O) over the surface of nZVI/BC might induce complex formations with cadmium by the ion exchange process. Besides this, the regular distribution and deep insertion of Fe particles in nZVI/BC prevent self-oxidation and over-accumulation of free radicals, which regulate the redox transformation by alleviating Cd/Fe+ translations in the plant. Current findings have exposed the diverse functions of nanoscale zerovalent-iron-enriched biochar on plant health and suggest that nZVI/BC is a competent material, feasible to control Cd hazards and improve crop growth and productivity in Cd-contaminated soil.