Selectivity Enhancement for Uric Acid Detection via In Situ Preparation of Blue Emissive Carbon Dots Entrapped in Chromium Metal-Organic Frameworks

Synthesis and applications of luminescent metal organic frameworks (MOFs) for sensing dipicolinic acid in biological and water samples: a review

The detection of trace quantities of 2,6-dipicolinic acid (DPA) in real-world samples is crucial for early disease diagnosis and routine health monitoring. Metal-organic frameworks (MOFs), recognized for their diverse structural architectures, have emerged as advanced multifunctional hybrid materials. One of the most notable properties of MOFs is their luminescence (L), which can arise from structural ligands, guest molecules, and emissive metal ions. Luminescent MOFs have shown significant promise as platforms for sensor design. This review highlights the application of luminescent MOFs in the detection of DPA in biological and aqueous environments. It provides a comprehensive discussion of the various detection strategies employed in luminescent MOF-based DPA sensors. Additionally, it explores the origins of L in MOFs, their synthesis, and the mechanisms underlying their sensing capabilities. The article also addresses key challenges and limitations in this field, offering practical insights for the development of efficient luminescent MOFs for DPA detection.

Carbon dots: synthesis, sensing mechanisms, and potential applications as promising materials for glucose sensors

The disruption of glucose (Glu) metabolism in the human body can lead to conditions such as diabetes and hyperglycemia. Therefore, accurately determining Glu levels is crucial for clinical diagnosis and other applications. Carbon dots (CDs) are a novel category of carbon nanomaterials that exhibit outstanding optical properties, excellent biocompatibility, high water solubility, low production costs, and straightforward synthesis. Recently, researchers have developed various carbon dot sensors for fast and real-time Glu monitoring. In this context, we provide a comprehensive introduction to Glu and CDs for the first time. We categorize the synthetic methods for CDs and the sensing mechanisms, further classifying the applications of carbon dot probes into single-probe sensing, ratiometric sensing, and visual detection. Finally, we discuss the future development needs for CD-based Glu sensors. This review aims to offer insights into advancing Glu sensors and modern medical treatments.

Harnessing Biomolecule-Infused 2D Multi-layered Luminescent Zn(II) Coordination Polymer for Electrochemical Energy Storage

Selecting the right functional linkers and metal centers is crucial for creating multifunctional crystalline coordination polymers, which show promise in energy storage applications. Herein, a new two-dimensional Zn(II)-based CP, named BPHCC-1, has been synthesized using solvothermal methods with 2-amino terephthalic acid (2ATA) and the biomolecule purine as key building blocks. Purine, which is relatively unexplored in CP synthesis, plays a crucial role in the distinct properties of CPs. BPHCC-1, obtained as a stable crystalline solid, was characterized through various analytical techniques including Fourier transform infrared spectroscopy, field emission scanning electron microscope, transmission electron microscopy, X-ray diffraction, X-ray photoelectron spectroscopy, and Brunauer-Emmett-Teller analysis. The material's stability is attributed to extensive hydrogen bonding, π···π interactions, and coordination of the -NH2 group with the Zn(II) center. BPHCC-1 exhibits bright blue luminescence at 435 nm with a photoluminescence quantum yield of 29% in an aqueous dispersion. Furthermore, it demonstrates significant electrochemical energy storage performance, with a specific capacitance of 84 F g-1 at 3 A g-1 and retaining 64% of its original capacitance after 500 cycles. This study introduces a facile approach to designing multifunctional CPs, showcasing BPHCC-1's potential as a luminescent probe and pseudocapacitive supercapacitor. The findings highlight the versatility of BPHCC-1, suggesting broad opportunities for its use across diverse fields.

Metal-organic framework (MOF)/C-dots and covalent organic framework (COF)/C-dots hybrid nanocomposites: Fabrications and applications in sensing, medical, environmental, and energy sectors

Developing new hybrid materials is critical for addressing the current needs of the world in various fields, such as energy, sensing, health, hygiene, and others. C-dots are a member of the carbon nanomaterial family with numerous applications. Aggregation is one of the barriers to the performance of C-dots, which causes luminescence quenching, surface area decreases, etc. To improve the performance of C-dots, numerous matrices including metal-organic frameworks (MOFs), covalent-organic frameworks (COFs), and polymers have been composited with C-dots. The porous crystalline structures, which are constituents of metal nodes and organic linkers (MOFs) or covalently attached organic units (COFs) provide privileged features such as high specific surface area, tunable structures, and pore diameters, modifiable surface, high thermal, mechanical, and chemical stabilities. Also, the MOFs and COFs protect the C-dots from the environment. Therefore, MOF/C-dots and COF/C-dots composites combine their features while retaining topological properties and improving performances. In this review, we first compare MOFs with COFs as matrices for C-dots. Then, the recent progress in developing hybrid MOFs/C-dots and COFs/C-dots composites has been discussed and their applications in various fields have been explained briefly.

A new three-dimensional (3D) molecularly imprinted polymer fluoroprobe based on green-red dual-emission signals of carbon quantum dots and self-polymerization of dopamine (CDs@PDA-MIPs) for sensitive detection of nifedipine

Nifedipine (NIF), as one of the dihydropyridine calcium channel blockers, is widely used in the treatment of hypertension. However, misuse or ingestion of NIF can result in serious health issues such as myocardial infarction, arrhythmia, stroke, and even death. It is essential to design a reliable and sensitive detection method to monitor NIF. In this work, an innovative molecularly imprinted polymer dual-emission fluorescent sensor (CDs@PDA-MIPs) strategy was successfully designed for sensitive detection of NIF. The fluorescent intensity of the probe decreased with increasing NIF concentration, showing a satisfactory linear relationship within the range 1.0 × 10-6 M ~ 5.0 × 10-3 M. The LOD of NIF was 9.38 × 10-7 M (S/N = 3) in fluorescence detection. The application of the CDs@PDA-MIPs in actual samples such as urine and Qiangli Dingxuan tablets has been verified, with recovery ranging from 97.8 to 102.8% for NIF. Therefore, the fluorescent probe demonstrates great potential as a sensing system for detecting NIF.

Environmentally sustainable synthesis of whey-based carbon dots for ferric ion detection in human serum and water samples: evaluating the greenness of the method

Carbon dots (CDs) are valued for their biocompatibility, easy fabrication, and distinct optical characteristics. The current study examines using whey to fabricate CDs using the hydrothermal method. When stimulated at 350 nm, the synthetic CDs emitted blue light at 423 nm and revealed a selective response to ferric ion (Fe3+) in actual samples with great sensitivity, making them a suitable probe for assessing Fe3+ ions. The produced carbon dots demonstrated great photostability, high sensitivity, and outstanding biocompatibility. The findings showed that Fe3+ ions could be quickly, sensitively, and extremely selectively detected in an aqueous solution of carbon dots, with a revealing limit of 0.409 μM in the linear range of 0-180 μM. Interestingly, this recognition boundary is far inferior to the WHO-recommended threshold of 0.77 μM. Two metric tools which were AGREE and the ComplexGAPI were also used to evaluate the method's greenness. The evaluation confirmed its superior environmental friendliness.

Metallic nanostructure-based aptasensors for robust detection of proteins

There is a significant need for fast, cost-effective, and highly sensitive protein target detection, particularly in the fields of food, environmental monitoring, and healthcare. The integration of high-affinity aptamers with metal-based nanomaterials has played a crucial role in advancing the development of innovative aptasensors tailored for the precise detection of specific proteins. Aptamers offer several advantages over commonly used molecular recognition methods, such as antibodies. Recently, a variety of metal-based aptasensors have been established. These metallic nanomaterials encompass noble metal nanoparticles, metal oxides, metal-carbon nanotubes, carbon quantum dots, graphene-conjugated metallic nanostructures, as well as their nanocomposites, metal-organic frameworks (MOFs), and MXenes. In general, these materials provide enhanced sensitivity through signal amplification and transduction mechanisms. This review primarily focuses on the advancement of aptasensors based on metallic materials for the highly sensitive detection of protein targets, including enzymes and growth factors. Additionally, it sheds light on the challenges encountered in this field and outlines future prospects. We firmly believe that this review will offer a comprehensive overview and fresh insights into metallic nanomaterials-based aptasensors and their capabilities, paving the way for the development of innovative point-of-care (POC) diagnostic devices.

A wide-range UAC sensor for the classification of hyperuricemia in spot samples

Hyperuricemia (HUA) has received wide attention as an independent risk factor for various chronic diseases. HUA is usually asymptomatic, and the related damage can be reduced by effective classification and treatment according to uric acid clearance (UAC). UAC is a calculated ratio based on the uric acid level in blood and urine. This important method is not universally used due to the inconvenience of collecting 24-h urine samples in the clinic, and most sensors are limited by the need for wide ranges and for two testing samples. In this study, a pH-sensitive urate oxidase-modified electrochemical sensor with filter membrane was proposed to calculate UAC by detecting uric acid in blood and urine. The results demonstrated that the sensor had high selectivity for uric acid with a detection limit of 0.25 μM in 5 μL spot sample, the wide linear range was 2.5-7000 μM, and the impact of the sample pH was calibrated. The linear correlation of the measurement results between the UAC sensor and clinical instrument was higher than 0.980 for 87 patients. The change in UAC in spot urine may reflect alteration in body-transport mechanisms. Thus, the UAC sensor may open a new window for the management of HUA and broaden its application in point-of-care testing.

Asterias forbesi-Inspired SERS Substrates for Wide-Range Detection of Uric Acid

Uric acid (UA), the final metabolite of purine, is primarily excreted through urine to maintain an appropriate concentration in the bloodstream. However, any malfunction in this process can lead to complications due to either deficiency or excess amount of UA. Hence, the development of a sensor platform with a wide-range detection is crucial. To realize this, we fabricated a surface-enhanced Raman spectroscopy (SERS) substrate inspired by a type of starfish with numerous protrusions, Asterias forbesi. The Asterias forbesi-inspired SERS (AF-SERS) substrate utilized an Au@Ag nanostructure and gold nanoparticles to mimic the leg and protrusion morphology of the starfish. This substrate exhibited excellent Raman performance due to numerous hotspots, demonstrating outstanding stability, reproducibility, and repeatability. In laboratory settings, we successfully detected UA down to a concentration of 1.16 nM (limit of detection) and demonstrated selectivity against various metabolites. In the experiments designed for real-world application, the AF-SERS substrate detected a broad range of UA concentrations, covering deficiencies and excesses, in both serum and urine samples. These results underscore the potential of the developed AF-SERS substrate as a practical detection platform for UA in real-world applications.

Intrinsic Dual-State Emission Zinc-Based MOF Rodlike Nanostructures with Applications in Smartphone Readout Visual-Based Detection for Tetracycline: MOF-Based Color Tonality

Dual-state emitters (DSEs) are entities that exhibit fluorescence in both the solution and solid state, which open up a wide range of possibilities for their utilization in various fields. The development of detection platforms using intrinsic luminescent metal-organic frameworks (LMOFs) is highly desirable for a variety of applications. DSE MOFs as a subclass of intrinsic LMOFs are highly attractive due to no need for encapsulation/functionalization by fluorophores and/or using luminescent linkers. Herein, a highly stable intrinsic dual-state blue emission (λem = 425 nm) zinc-based MOF with rodlike nanostructures (denoted as UoZ-2) was synthesized and characterized. To the best of our knowledge, intrinsic DSE of Zn-MOFs with blue emission in the dispersed form in solution and solid-state fluorescence have not been reported yet. When tetracycline (TC) was added, a continuous color evolution from blue to greenish-yellow with dramatic enhancement was observed due to aggregation induced emission (AIE). Thus, a sensitive ratiometry-based visual detection platform, in solution and on paper independently, was designed for detection of TC exploiting the DSE and AIE properties of UoZ-2 alone and UoZ-2:TC. The detection limit was estimated to be 4.5 nM, which is considered to be one of the most sensitive ratiometric fluorescent probes for TC sensing. The ratiometry paper-based UoZ-2 sensor displays a reliable TC quantitative analysis by recognizing RGB values in the on-site TC detection with satisfactory recoveries.

Progress in optical sensors-based uric acid detection

The escalating number of patients affected by various diseases, such as gout, attributed to abnormal uric acid (UA) concentrations in body fluids, has underscored the need for rapid, efficient, highly sensitive, and stable UA detection methods and sensors. Optical sensors have garnered significant attention due to their simplicity, cost-effectiveness, and resistance to electromagnetic interference. Notably, research efforts have been directed towards UA on-site detection, enabling daily monitoring at home and facilitating rapid disease screening in the community. This review aims to systematically categorize and provide detailed descriptions of the notable achievements and emerging technologies in UA optical sensors over the past five years. The review highlights the advantages of each sensor while also identifying their limitations in on-site applications. Furthermore, recent progress in instrumentation and the application of UA on-site detection in body fluids is discussed, along with the existing challenges and prospects for future development. The review serves as an informative resource, offering technical insights and promising directions for future research in the design and application of on-site optical sensors for UA detection.

Dual-template molecularly surface imprinted polymer on fluorescent metal-organic frameworks functionalized with carbon dots for ascorbic acid and uric acid detection

In this work, dual-template molecularly imprinted polymer surfaces imprinted on blue fluorescent Cr-based MOF (Cr-MOF) functionalized with yellow emissive carbon dots (Y-CDs) were prepared using l-ascorbic acid (AA) and uric acid (UA) as templates for simultaneous selective recognition of AA and UA. The as-prepared nanocomposite probe (Y-CDs/Cr-MOF@MIP) contains two recognition site cavities and emits a dual well-resolved fluorescence spectra when excited at 390 nm; blue emission (λ_em 450 nm) is due to Cr-MOF, and yellow emission (λ_em 560 nm) is due to Y-CDs. The yellow fluorescence emission of Y-CDs was quenched upon the addition of ascorbic acid, while Cr-MOF's emission remained unaffected. In the same way, the blue fluorescence emission of the Cr-MOFs was quenched in the presence of uric acid, while the yellow emission remained constant. Both emissions were quenched in a sample containing both AA and UA. This can be exploited to design a dual-template biosensor to detect UA and AA simultaneously. The Y-CDs/Cr-MOF@MIP sensor displayed a dynamic linear response for AA in the range 25.0 µM - 425.0 µM with a detection limit of 1.30 µM, and for UA in the range 25.0 µM - 425.0 µM with a detection limit of 1.10 µM. The dual-target probe Y-CDs/Cr-MOF@MIP was highly selective and sensitive for the detection of UA and AA in human urine samples due to the selectivity of the two recognition sites.

Ultra-small highly fluorescent zinc-based metal organic framework nanodots for ratiometric visual sensing of tetracycline based on aggregation induced emission

Color tonality by intrinsic fluorescent metal-organic frameworks (MOFs) is highly desirable in bioanalytical applications due to its stability, low-cost and robustness with no need for functionalization and/or encapsulation of fluorophores. In the present work, ultra-small and higly fluorescent zinc-based MOFs (FMOF-5) were synthesized. The prepared FMOFs were around 5 nm in size, and gave strong blue emission at 440 nm when excited at 350 nm. Interestingly, tetracycline (TC) selectively tuned the blue emission of FMOF-5 to greenish-yellow emission (520 nm) with dramatic enhancement through aggregation induced emission (AIE). The fluorimetric analysis of TC was carried out through the ratiometric peak intensities of F520/F440, with detection limit (LOD) of 5 nM. To realize quantitative point-of-care based on color tonality, a smartphone integrated with the ratiometric visual platform was thereby design. Hence, TC was visually detected with LOD of 10 nM. The prepared FMOF-5-based probe showed high stability (3 months) and reusability (∼10 times). The developed visual-based platform presents great promise for practical point of care testing due to its low-cost, robustness, ruggedness, simple operation, and excellent selectivity and repeatability.

Nanozyme and Stimulated Fluorescent Cu-Based Metal-Organic Frameworks (Cu-MOFs) Functionalized with Engineered Aptamers as a Molecular Recognition Element for Thrombin Detection in the Plasma of COVID-19 Patients

An essential tool in the management and control of the COVID-19 pandemic is the development of a fast, selective, sensitive, and inexpensive COVID-19 biomarkers detection method. Herein, an ultrasensitive and label-free biosensing strategy was described for the colorimetric and fluorimetric detection of thrombin. A dual-mode aptasensing method based on integrating engineered ssDNA with a stimulated fluorescent enzyme-mimetic copper-based metal-organic framework (Cu-MOF) as a molecular recognition element for thrombin was investigated. Cu-MOFs displayed stimulated fluorescence and enzyme-mimetic peroxidase activities that oxidize the chromogenic colorless substance TMB to blue-colored oxTMB. The thrombin-based aptamer (ssDNA) can be immobilized on the Cu-MOF surface to form a functionalized composite, ssDNA/MOF, and quench the stimulated fluorescence emission and the enzymatic activity of the Cu-MOF. Later, addition of thrombin recovers the fluorescence and enzymatic activity of the MOF. Thus, a turn-on colorimetry/fluorimetry aptasensing probe was designed for the detection of thrombin. Based on colorimetric assay, 350 pM was recorded as the lower limit of detection (LOD), while based on the fluorescence mode, 110 fM was recorded as the LOD (when S/N = 3). The label-free aptasensing probe was used successfully for the detection of thrombin in COVID-19 patients with satisfactory recoveries, 95-98%. Since the detection time of our aptasensor is relatively rapid (45 min) and due to the low-cost precursors and easy-to-operate characteristics, we believe that it has great potential to be used in point-of-care testing (POCT).

Ultrasensitive aptamer-functionalized Cu-MOF fluorescent nanozyme as an optical biosensor for detection of C-reactive protein

In the present work, an aptasensing method based on integration of RNA on Cu-MOF was developed for detection of C-Reactive Protein (CRP). Cu-MOF showed stimulated fluorescence and mimetic peroxidase enzymatic activity at the time and can be used as dual-signal transduction. CRP binding RNA was used as a highly selective recognition element and immobilized on the Cu-MOF. The immobilized RNA can block the peroxidase activity and fluorescence of the signal traducer probe. Adding CRP to the RNA/Cu-MOF will release RNA from the surface of Cu-MOF and recover both the stimulated fluorescence and peroxidase activity. A biosensor was built for detection of CRP using the two modes of transduction, either colorimetry or fluorometry. A dynamic linear range was obtained from 0.1 to 50 ng mL ^-1with a limit of detection (LOD) as small as 40 pg mL ^-1was calculated in fluorescence mode and 240 pg mL ^-1 as LOD in colorimetry mode. The LODs are lower than the LOD of nephelometric techniques used in clinical practice and is comparable to the normal clinical cutoff value in high-sensitivity CRP assays (1 μg/mL). The aptasensor was successfully applied for detection of CRP in Covid-19 patients with spike recoveries between 84 and 102% and RSD from 0.94% to 2.05%.