Speciation and Semiquantification of Nitrogen-Containing Species in Complex Mixtures: Application to Plastic Pyrolysis Oil

GC-FTICR mass spectrometry with dopant assisted atmospheric pressure photoionization: application to the characterization of plastic pyrolysis oil

Pyrolysis is a promising way to convert plastic waste into valuable resources. However, for downstream upgrading processes, many undesirable species, such as conjugated diolefins or heteroatom-containing compounds, can be generated during this pyrolysis. In-depth chemical characterization is therefore required to improve conversion and valorization. Because of the high molecular diversity found in these samples, advanced analytical instrumentation is needed to provide accurate and complete characterization. Generally, direct infusion Fourier transform mass spectrometry is used to gather information at the molecular level, but it has the disadvantage of limited structural insights. To overcome this drawback, gas chromatography has been coupled to Fourier transform ion cyclotron resonance mass spectrometry. By taking advantage of soft atmospheric pressure photoionization, which preserves molecular information, and the use of different dopants (pyrrole, toluene, and benzene), selective ionization of different chemical families was achieved. Differences in the ionization energy of the dopants will only allow the ionization of the molecules of the pyrolysis oil which have lower ionization energy, or which are accessible via specific chemical ionization pathways. With a selective focus on hydrocarbon species and especially hydrocarbon species having a double bond equivalent (DBE) value of 2, pyrrole is prone to better ionize low-mass molecules with lower retention times compared to the dopant benzene, which allowed better ionization of high-mass molecules with higher retention times. The toluene dopant presented the advantage of ionizing both low and high mass molecules.

Potential of GC-Combustion-MS as a Powerful and Versatile Nitrogen-Selective Detector in Gas Chromatography

Here, we show the potential and applicability of the novel GC-combustion-MS approach as a nitrogen-selective GC detector. Operating requirements to achieve reproducible and compound-independent formation of volatile NO species as a selective N-signal during the combustion step are described. Specifically, high temperatures (≥1000 °C) and post-column O2 flows (0.4 mL min-1 of 0.3% O2 in He) turned out to be necessary when using a vertical oven without makeup flow (prototype #1). In contrast, the use of a horizontal oven with 1.7 mL min-1 He as an additional makeup flow (prototype #2) required milder conditions (850 °C and 0.2 mL min-1). A detection limit of 0.02 pg of N injected was achieved, which is by far the lowest ever reported for any GC detector. Equimolarity, linearity, and peak shape were also adequate. Validation of the approach was performed by the analysis of a certified reference material obtaining accurate (2% error) and precise (2% RSD) results. Robustness was tested with the analysis of two complex samples with different matrices (diesel and biomass pyrolysis oil) and N concentration levels. Total N determined after the integration of the whole chromatograms (524 ± 22 and 11,140 ± 330 μg N g-1, respectively) was in good agreement with the reference values (497 ± 10 and 11,000 ± 1200 μg N g-1, respectively). In contrast, GC-NCD results were lower for the diesel sample (394 ± 42 μg N g-1). Quantitative values for the individual and families of N species identified in the real samples by parallel GC-MS and additional GC × GC-MS analyses were also obtained using a single generic internal standard.

Analysis of Fuel Alternative Products Obtained by the Pyrolysis of Diverse Types of Plastic Materials Isolated from a Dumpsite Origin in Pakistan

The current energy crisis and waste management problems have compelled people to find alternatives to conventional non-renewable fuels and utilize waste to recover energy. Pyrolysis of plastics, which make up a considerable portion of municipal and industrial waste, has emerged as a feasible resolution to both satisfy our energy needs and mitigate the issue of plastic waste. This study was therefore conducted to find a solution for plastic waste management problems, as well as to find an alternative to mitigate the current energy crisis. Pyrolysis of five of the most commonly used plastics, polyethylene terephthalate (PET), high- and low-density polyethylene (HDPE, LDPE), polypropylene (PP), and polystyrene (PS), was executed in a pyrolytic reactor designed utilizing a cylindrical shaped stainless steel container with pressure and temperature gauges and a condenser to cool down the hydrocarbons produced. The liquid products collected were highly flammable and their chemical properties revealed them as fuel alternatives. Among them, the highest yield of fuel conversion (82%) was observed for HDPE followed by PP, PS, LDPE, PS, and PET (61.8%, 58.0%, 50.0%, and 11.0%, respectively). The calorific values of the products, 46.2, 46.2, 45.9, 42.8 and 42.4 MJ/kg for LPDE, PP, HPDE, PS, and PET, respectively, were comparable to those of diesel and gasoline. Spectroscopic and chromatographic analysis proved the presence of alkanes and alkenes with carbon number ranges of C₉-C₁₅, C₉-C₂₄, C₁₀-C₂₁, C₁₀-C₂₈, and C₉-C₁₇ for PP, PET, HDPE, LDPE, and PS, respectively. If implemented, the study will prove to be beneficial and contribute to mitigating the major energy and environmental issues of developing countries, as well as enhance entrepreneurship opportunities by replicating the process at small-scale and industrial levels.