One-step Green Fabrication of Antimicrobial Surfaces via In Situ Growth of Copper Oxide Nanoparticles

Mechanochemical Activation of Silicone for Large-Scale Fabrication of Anti-Biofouling Liquid-like Surfaces

Large-scale preparation of liquid-like coatings with perfect transparency via solventless and room-temperature processes using low-cost and biocompatible materials is of tremendous interest for a broad range of applications. Here, we present a mechanochemical activation strategy for solventless grafting of poly(dimethylsiloxane) (PDMS) onto glass, silicon wafers, and ceramics. Activation is achieved via ball milling PDMS without using any solvents or additives prior to application. Ball milling results in chain scission and generation of free radicals, allowing room-temperature grafting at durations ≤1 h. The deposition of ball-milled PDMS can be facilitated by brushing or drop-casting, enabling large-scale applications. The resulting surfaces facilitate the sliding of droplets at angles <20° for liquids with surface tension ranging from 22 to 73 mN/m. An important application for public health is generating anti-biofouling coatings on sanitary ware. For example, PDMS-grafted surfaces prepared on a regular-size toilet bowl exhibit a 105-fold decrease in the attachment of bacteria from urine. These findings highlight the significant potential of mechanochemical processes for the practical preparation of liquid-like surfaces.

Nature-Skin-Derived e-Skin as Versatile "Wound Therapy-Health Monitoring" Bioelectronic Skin-Scaffolds: Skin to Bio-e-Skin

Electronic skins (e-skins) have the potential to turn into breakthroughs in biomedical applications. Herein, a novel acellular dermal matrix (ADM)-based bioelectronic skin (e-ADM) is used to fabricate versatile "wound therapy-health monitoring" tissue-nanoengineered skin scaffolds via a facile "one-pot" bio-compositing strategy to incorporate the conductive carbon nanotubes and self-assembled micro-copper oxide microspheres with a cicada-wing-like rough surface and nanocone microstructure. The e-ADM exhibits robust tensile strength (22 MPa), flexibility, biodegradability, electroactivity, and antibacterial properties. Interestingly, e-ADM exhibits the pH-responsive ability for intelligent command between sterilization and wound repair . Additionally, e-ADM enables accurate real-time monitoring of human activities, providing a novel flexible e-skin sensor to record injury and motions. In vitro and in vivo experiments show that with electrical stimulation, e-ADM could prominently facilitate cell growth and proliferation and further promote full-thickness skin wound healing, providing a comprehensive therapeutic strategy for smart sensing and tissue repair, guiding the development of high-performance "wound therapy-health monitoring" bioelectronic skin-scaffolds.

Disintegration and Machine-Learning-Assisted Identification of Bacteria on Antimicrobial and Plasmonic Ag-CuxO Nanostructures

Bacteria cause many common infections and are the culprit of many outbreaks throughout history that have led to the loss of millions of lives. Contamination of inanimate surfaces in clinics, the food chain, and the environment poses a significant threat to humanity, with the increase in antimicrobial resistance exacerbating the issue. Two key strategies to address this issue are antibacterial coatings and effective detection of bacterial contamination. In this study, we present the formation of antimicrobial and plasmonic surfaces based on Ag-Cu_xO nanostructures using green synthesis methods and low-cost paper substrates. The fabricated nanostructured surfaces exhibit excellent bactericidal efficiency and high surface-enhanced Raman scattering (SERS) activity. The Cu_xO ensures outstanding and rapid antibacterial activity within 30 min, with a rate of >99.99% against typical Gram-negative Escherichia coli and Gram-positive Staphylococcus aureus bacteria. The plasmonic Ag nanoparticles facilitate the electromagnetic enhancement of Raman scattering and enables rapid, label-free, and sensitive identification of bacteria at a concentration as low as 10³ cfu/mL. The detection of different strains at this low concentration is attributed to the leaching of the intracellular components of the bacteria caused by the nanostructures. Additionally, SERS is coupled with machine learning algorithms for the automated identification of bacteria with an accuracy that exceeds 96%. The proposed strategy achieves effective prevention of bacterial contamination and accurate identification of the bacteria on the same material platform by using sustainable and low-cost materials.

Biosynthesis of Novel Tellurium Nanorods by Gayadomonas sp. TNPM15 Isolated from Mangrove Sediments and Assessment of Their Impact on Spore Germination and Ultrastructure of Phytopathogenic Fungi

The biosynthesis of nanoparticles using green technology is emerging as a cost-efficient, eco-friendly and risk-free strategy in nanotechnology. Recently, tellurium nanoparticles (TeNPs) have attracted growing attention due to their unique properties in biomedicine, electronics, and other industrial applications. The current investigation addresses the green synthesis of TeNPs using a newly isolated mangrove-associated bacterium, Gayadomonas sp. TNPM15, and their impact on the phytopathogenic fungi Fusarium oxysporum and Alternaria alternata. The biogenic TeNPs were characterized using transmission electron microscopy (TEM), scanning electron microscopy (SEM), energy-dispersive X-ray spectroscopy (EDX), X-ray diffraction (XRD), Raman spectroscopy and Fourier transform infrared (FTIR). The results of TEM revealed the intracellular biosynthesis of rod-shaped nanostructures with a diameter range from 15 to 23 nm and different lengths reaching up to 243 nm. Furthermore, the successful formation of tellurium nanorods was verified by SEM-EDX, and the XRD pattern revealed their crystallinity. In addition, the FTIR spectrum provided evidence for the presence of proteinaceous capping agents. The bioinspired TeNPs exhibited obvious inhibitory effect on the spores of both investigated phytopathogens accomplished with prominent ultrastructure alternations, as evidenced by TEM observations. The biogenic TeNPs impeded spore germination of F. oxysporum and A. alternata completely at 48.1 and 27.6 µg/mL, respectively. Furthermore, an increase in DNA and protein leakage was observed upon exposure of fungal spores to the biogenic TeNPs, indicating the disruption of membrane permeability and integrity. Besides their potent influence on fungal spores, the biogenic TeNPs demonstrated remarkable inhibitory effects on the production of various plant cell wall-degrading enzymes. Moreover, the cytotoxicity investigations revealed the biocompatibility of the as-prepared biogenic TeNPs and their low toxicity against the human skin fibroblast (HSF) cell line. The biogenic TeNPs showed no significant cytotoxic effect towards HSF cells at concentrations up to 80 μg/mL, with a half-maximal inhibitory concentration (IC50) value of 125 μg/mL. The present work spotlights the antifungal potential of the biogenic TeNPs produced by marine bacterium against phytopathogenic fungi as a promising candidate to combat fungal infections.

Rational Integration of ZIF-8 and BiPO4 for Energy Storage and Environmental Applications

Environmental pollution and energy storage are among the most pivotal challenges of today's world. The development of multifunctional materials is required to address these challenges. Our study presents the rational design and synthesis of a hybrid material (ZIF-8@BiPO₄) with dual functionality: an outstanding supercapacitor electrode and an excellent photocatalyst. The ZIF-8@BiPO₄ hybrid structure was obtained by conjoining zinc ions and 2-methylimidazole ligands toward BiPO₄ by a one-pot stirring route at room temperature. The ZIF-8@BiPO₄ resulted in considerably higher specific capacitance (Cs) (489 F g^-1 at a scan rate of 5 mV s^-1; 497 F g^-1 at a current density of 1 A g^-1) than that of pure BiPO₄ (358; 443 F g^-1) and ZIF-8 (185; 178 F g^-1) under the same conditions in a three-electrode cell using the 2 M KOH aqueous electrolyte. Afterward, an asymmetric supercapacitor (ASC) device was fabricated with BiPO₄ as the anode and ZIF-8@BiPO₄ as the cathodes, acquiring an outstanding Cs of 255 F g^-1 at a current density of 0.5 A g^-1 with significant cycling stability (81% over 10,000 cycles). Moreover, the ASC has an energy density of 17.5 Wh kg^-1and a power density of 13,695 W kg^-1, which can be considered to be at the borderline between batteries and supercapacitors. The photocatalytic activity of ZIF-8@BiPO₄ was further studied using a methylene blue (MB) dye and sildenafil citrate (SC) drug-active molecules. The degradation of MB was approximately 78% through the photocatalytic reduction after 180 min of UV irradiation. The outstanding characteristics together with the ecofriendly and low-cost preparation make ZIF-8@BiPO₄ appealing for a broad range of applications.