Green Chromatographic Method for Determination of Active Pharmaceutical Ingredient, Preservative, and Antioxidant in an Injectable Formulation: Robustness by Design Expert

Current green capillary electrophoresis and liquid chromatography methods for analysis of pharmaceutical and biomedical samples (2019-2023) - A review

Separation analytical methods, including liquid chromatography (LC) and capillary electrophoresis (CE), in combination with an appropriate detection technique, are dominant and powerful approaches preferred in the analysis of pharmaceutical and biomedical samples. Recent trends in analytical methods are focused on activities that push them to the field of greenness and sustainability. New approaches based on the implementation of greener solvents, non-hazardous chemicals, and reagents have grown exponentially. Similarly, recent trends are pushed in to the strategies based on miniaturization, reduction of wastes, avoiding derivatization procedures, or reduction of energy consumption. However, the real greenness of the analytical method can be evaluated only according to an objective and sufficient metric offering complex results taking into account all twelve rules of green analytical chemistry (SIGNIFICANCE mnemonic system). This review provides an extensive overview of papers published in the area of development of green LC and CE methods in the field of pharmaceutical and biomedical analysis over the last 5 years (2019-2023). The main focus is situated on the metrics used for greenness evaluation of the methods applied for the determination of bioactive agents. It critically evaluates and compares the demands of the real applicability of the methods in quality control and clinical environment with the requirements of the green analytical chemistry (GAC). Greenness and practicality of the summarized methods are re-evaluated or newly evaluated with the use of the dominant metrics tools, i.e., Analytical GREEnness (AGREE), Green Analytical Procedure Index (GAPI), Blue Applicability Grade Index (BAGI), and Sample Preparation Metric of Sustainability (SPMS). Moreover, general conclusions and future perspectives of the greening procedures and greenness evaluation metrics systems are presented. This paper should provide comprehensive information to analytical chemists, biochemists, and it can also represent a valuable source of information for clinicians, biomedical or quality control laboratories interested in development of analytical methods based on greenness, practicality, and sustainability.

Novel RP-HPLC method for estimation of a newly developed combination of tizanidine and etoricoxib in rat plasma: Eight criteria for greens evaluation

A novel environmentally friendly reversed-phase high-performance liquid chromatography (RP-HPLC) method has been effectively validated for simultaneously measuring a prospective conjunction of tizanidine (TIZ) and etoricoxib (ETC), the combined medicine, in rat plasma. The technique employs diclofenac potassium as the internal standard, guaranteeing dependable and precise outcomes. This study aimed to assess the impact of the suggested combination therapy on treating inflammation resulting from rheumatoid arthritis (RA) in a rat model. The procedure was performed using an Agilent series 1200 model HPLC apparatus. The chromatographic conditions consist of isocratic elution mode, C18 column with dimensions of 150 mm × 4.6 mm × 5 µm, flow rate of 1.5 mL/min, wavelength of 230 nm, temperature of 50°C, and injection volume of 10 µL. The elution was performed using a mobile phase consisting of a phosphate buffer with a pH of 3.5 and acetonitrile in a ratio of 80:20 v/v. Calibration curves were conducted for TIZ and ETC within the 1-50 µg/mL range, demonstrating linear trends with R2 values over 0.999. The effectiveness and eco-friendliness of the proposed method were evaluated using eight separate environmentally conscious metrics. The addition of TIZ and ETC to arthritic rodents amplified these effects significantly. Furthermore, TIZ and ETC significantly reduced serum levels in arthritic rodents, and safety investigations revealed normal complete blood count, liver, and renal functions. TIZ and ETC appear to have antiarthritic, anti-inflammatory, and safe combinations, making them viable future treatment options for RA that are also safe and efficacious. Following validation by United States Food and Drug Administration (US-FDA) rules, all goods met the criteria.

[Preparation and application of chromatographic stationary phase based on two-dimensional materials]

The stationary phase is the heart of chromatographic separation technology and a critical contributor to the overall separation performance of a chromatographic separation technique. However, traditional silicon-based materials designed for this purpose usually feature complex preparation processes, suboptimal permeability, pronounced mass-transfer resistance, and limited pH-range compatibility. These limitations have spurred ongoing research efforts aimed at developing new chromatographic stationary phases characterized by higher separation efficiency, adaptable selectivity, and a broader scope of applicability. In this context, the scientific community has made significant strides toward the development of new-generation materials suitable for use as chromatographic stationary phases. These materials include carbon-based nanomaterial arrays, carbon quantum dots, and two-dimensional (2D) materials. 2D-materials are characterized by nanometer-scale thicknesses, extensive specific surface areas, distinctive layered structures, and outstanding mechanical properties under standard conditions. Thus, these materials demonstrate excellent utility in various applications, such as electrical and thermal conductivity enhancements, gas storage and separation solutions, membrane separation technologies, and catalysis. Graphene, which is arguably the most popular 2D-material used for chromatographic separation, consists of a 2D-lattice of carbon atoms arranged in a single layer, with a large specific surface area and efficient adsorption properties. Its widespread adoption in research and various industries is a testament to its versatility and effectiveness. In addition to graphene, the scientific community has developed various 2D-materials that mirror the layered structures of graphene, such as boron nitride, transition-metal sulfides, and 2D porous organic frameworks, all of which offer unique advantages. 2D porous organic frameworks, in particular, have received attention because of their nanosheet morphology, one-dimensional pores, and special interlayer forces; thus, these frameworks are considered promising candidate chromatographic stationary phase materials. Such recognition is especially true for 2D-metal organic frameworks (MOFs) and 2D-covalent organic frameworks (COFs), which exhibit low densities, high porosities, and substantial specific surface areas. The modifiability of these materials, in terms of pore size, shape, functional groups, and layer-stacking arrangements allows for excellent separation selectivity, highlighting their promising potential in chromatographic separation. Compared with their three-dimensional counterparts, 2D-MOFs feature a simple pore structure that offers reduced mass-transfer resistance and enhanced column efficiency. These attributes highlight the advantages of 2D-MOF nanosheets as chromatographic stationary phases. Similarly, 2D-COFs, given their high specific surface area and porosity, not only exhibit great thermal stability and chemical tolerance but also support a wide selection of solvents and operational conditions. Therefore, their role in the preparation of chromatographic stationary phases is considered highly promising. This review discusses the latest research developments in 2D porous organic framework materials in the context of gas- and liquid-chromatographic stationary phases. It introduces the synthesis methods for these novel materials, elucidates their retention mechanisms, and describes the applications of other 2D-materials, such as graphene, its derivatives, graphitic carbon nitride, and boron nitride, in chromatography. This review aims to shed light on the promising development prospects and future directions of 2D-materials in the field of chromatographic separation, offering valuable insights into the rational design and application of new 2D-materials in chromatography.

Quality by Design Tool Assessed Ultraperformance Liquid Chromatography Method for the Analysis of Remogliflozin and Teneligliptin in Oral Dosage Form

The UPLC methodology was used to establish a method for determining the qualitative and quantitative content of teneligliptin and remogliflozin tablets in oral solid dose form, as no simultaneous method was available. The developed liquid chromatography method consists of an X-Bridge C18 100 mm × 3.5 mm, 2.1 mm column with an economical 0.2 mL/min flow rate. A wavelength of 248 nm was used for detection, and the temperature of the column compartment was 30 °C. The method was evaluated using a static tool quality by design after it was validated as per the regulations. The data from validation result in linearity for both analytes with a correlation coefficient of more than 0.999. The accuracy data were found from a minimum of 98.1 to a maximum of 100.9. All of the validation results met the acceptance criteria. The stability of the analytical solutions proved for 24 h at bench and refrigerator temperatures. Studies of force degradation proved the stability indicating the nature of the method. A factorial design was used to evaluate the method performance.

Quantification of Drospirenone- and Ethinyl Estradiol-Related Impurities in a Combined Pharmaceutical Dosage Form by a Chromatography Method With a QbD Robustness Study

BACKGROUND

The estimation of drugs containing drospirenone (DRSP) and ethinyl estradiol (EE), and their related impurities, in low-dose oral contraceptive drug products is an extremely challenging target. The proposed research sought to develop and validate a stability-indicating method for quantifying drug substances and their related impurities in tablet formulation.

OBJECTIVE

To develop and validate a simple, specific, accurate, precise, and stability-indicating reverse-phase (RP)-HPLC method for quantification of DRSP, EE, and their impurities in accordance with International Conference on Harmonisation (ICH) guidelines.

METHOD

The separation was achieved using an Agilent Zorbax SB C18 column (4.6 mm × 250 mm, 5 µm) with a detection wavelength of 215 nm and mobile phases A (100% acetonitrile) and B (acetonitrile-water, 1 + 3, v/v) at a flow rate of 1.3 mL/min and a column temperature of 40°C.

RESULTS

The recovery study of each impurity was conducted in the range of 24 to 72 µg/mL for DRSP-related impurities and 0.2 to 0.6 µg/mL for EE-related impurities with respect to the specification limit. A linearity study was conducted over a range of 1.5 to 90 µg/mL for DRSP and DRSP-related impurities, and 0.125 to 0.75 µg/mL for EE-related impurities. A Quality by Design (QbD) study demonstrated the method's robustness.

CONCLUSIONS

As per current guidelines, a stability-indicating method has been developed for the determination of impurities in DRSP/EE film-coated tablets. A QbD-based robustness test was performed and the method was found to be robust.

HIGHLIGHTS

An accurate, precise, stability-indicating, gradient RP-HPLC method has been developed and validated to determine DRSP, EE, and nine related impurities in tablet formulation. A QbD technique was used to establish a robustness study.

Recent Trends in Nanomaterial Based Electrochemical Sensors for Drug Detection: Considering Green Assessment

An individual's therapeutic drug exposure level is directly linked to corresponding clinical effects. Rapid, sensitive, inexpensive, portable and reliable devices are needed for diagnosis related to drug exposure, treatment, and prognosis of diseases. Electrochemical sensors are useful for drug monitoring due to their high sensitivity and fast response time. Also, they can be combined with portable signal read-out devices for point-of-care applications. In recent years, nanomaterials such as carbon-based, carbon-metal nanocomposites, noble nanomaterials have been widely used to modify electrode surfaces due to their outstanding features including catalytic abilities, conductivity, chemical stability, biocompatibility for development of electrochemical sensors. This review paper presents the most recent advances about nanomaterials-based electrochemical sensors including the use of green assessment approach for detection of drugs including anticancer, antiviral, anti-inflammatory, and antibiotics covering the period from 2019 to 2023. The sensor characteristics such as analyte interactions, fabrication, sensitivity, and selectivity are also discussed. In addition, the current challenges and potential future directions of the field are highlighted.

Valbenazine isomers and enantiomer determination by chiral normal phase liquid chromatography

A novel, simple, specific, rapid, enantioselective normal phase chiral high-performance liquid chromatographic method with amylose-based Chiral Pak IG-3(250 × 4.6 mM) 3.0 μM column was developed and validated for separation and quantification of isomers and enantiomer of Valbenazine. The mobile phase composed of n-Heptane, isopropyl alcohol, dichloromethane, ethanol, and diethylamine in the ratio of 70:10:15:5:0.1 (V/V/V/VV) with a gradient flow rate was applied. The injection volume was 10 μl, and detection was carried out using a photodiode array detector at 282 nM. The column compartment was set at 35°C. The resolution between the enantiomer and isomers was found to be more than 2.0. The method was linear over the concentration range of limit of quantitation to 250% for isomers and enantiomers. The method was found to be robust with column temperature. The proposed chiral method is applicable for the determination of isomers and enantiomer of Valibenazine and was successfully used in the quality control of bulk drug manufacturing and pharmaceuticals.

[Research progress on preparation and applications of covalent organic framework-based chromatographic stationary phases]

Given continuous developments in industrial and scientific research, the separation and analysis of complex systems with high sensitivity, throughput, and selectivity is facing new challenges. Chromatography plays an irreplaceable role in separation science and is widely applied in environmental monitoring, pharmaceutical analysis, and food safety. Owing to their outstanding advantages, such as high loading capacity, precise quantification, and good reproducibility, chromatographic separation techniques based on various retention mechanisms have been utilized to detect different analytes. The stationary phase is the core material of chromatographic columns and has an extremely important influence on their separation performance. The selectivity and efficiency of separation largely depend on the chromatographic stationary phase. However, traditional stationary phases, such as silicon-based matrices, are characterized by complex preparation processes, poor permeability, large mass transfer resistance, and a narrow pH range. In addition, polymer matrices show poor mechanical stability and susceptibility to swelling, which limit their applications in the field of separation. Therefore, the development of novel stationary phases with the advantages of traditional stationary phases has become a research emphasis in the field of analytical science in efforts to meet separation requirements under different environments. Various stationary phases based on novel porous materials, such as metal organic frameworks (MOFs), porous organic cages (POCs), and covalent organic frameworks (COFs), are used for chromatographic separation. As mesh crystalline porous materials, MOFs have the advantages of a large surface area, adjustable structure, and easy functionalization; thus, they are widely used as chromatographic stationary phases in reverse-phase chromatography, hydrophilic-mode chromatography, mixed-mode chromatography, and other separation modes. However, because the pore size of MOFs is small and most MOFs demonstrate poor chemical stability under acidic or alkaline conditions, their applications in chromatographic separation are greatly limited. COFs are porous, crystalline polymer materials composed of light elements (H, O, C, N, B, and Si) connected via covalent bonds. Their advantages include a low density, large specific surface area, high porosity, good chemical and thermal stability, regular pores, and adjustable pore sizes. Because of their unique structures and properties, COFs are widely used in many fields such as catalysis, enrichment, gas capture, and sensing. COF materials are also suitable for separation analysis and considered ideal materials for novel chromatographic stationary phases. This review summarizes the latest research progress on the preparation and applications of COF-based chromatographic stationary phases over the past five years. First, the preparation of COF-based stationary phases (SiO2@COFs stationary phase, COFs monolithic stationary phase, pure COFs stationary phase and COFs-coated stationary phase) is introduced. The latest applications of COF-based stationary phases in the separation of organic compounds, isomers, and chiral compounds are then described in detail. Finally, the future development trends and challenges of chromatographic stationary phases based on COFs are discussed to provide new ideas for the future design and development of novel chromatographic stationary phases based on COFs.

Quality by design tool-evaluated stability-indicating ultra-performance liquid chromatography method for the determination of drugs (ritonavir and darunavir) used to treat the human immunodeficiency virus/acquired immunodeficiency syndrome

Ritonavir and darunavir were examined using a ultra-performance liquid chromatography (UPLC) approach in pharmaceutical dosage forms. The small number of analytical studies that are currently available do not demonstrate the method's stability or nature. The study sought to assess both chemicals using a stability-indicating approach with a relatively short run time. The HSS C18 (100 × 2.1 mm), 2-mm column was used for the chromatographic separation, and isocratic elution was used to achieve this. In the mobile phase, methanol and 0.01 M phosphate buffer (pH 4.0) were included in a 60:40 (v/v) ratio. Throughout the analysis, the flow rate was kept at 0.2 mL min-1 , and a photodiode array detector set to 266 nm was used to find the major components. The proposed method showed a linear response (r2  > 0.999), and the accuracy was between 98.0% and 102.0%. The precision data showed relative standard deviation ≤1.0%. The UPLC method for quantification of ritonavir and darunavir in pharmaceutical dosage forms using a very short run time of under a minute is the subject of the proposed article. To meet current regulatory criteria, the quality by design idea was used in the method performance verification.

Regulatory Perspective Reverse Engineering Analysis of the Mast Cell Stabilizer and the Histamine Receptor Antagonist (Olopatadine HCl): Instrumental and Classical Methods for Multiple Formulations

This study evaluates the unknown qualitative (Q1) and quantitative (Q2) formulas for nasal spray and ophthalmic solution formulations of olopatadine HCl by classical and instrumental techniques to match the generic formula with reference-listed drugs to avoid clinical study. Reverse engineering of olopatadine HCl nasal spray 0.6% and ophthalmic solution 0.1, 0.2% formulations was accurately quantified using a simple and sensitive reversed-phase high-performance liquid chromatography (HPLC) method. Both formulations possess similar components, namely ethylenediaminetetraacetic acid (EDTA), benzalkonium chloride (BKC), sodium chloride (NaCl), and dibasic sodium phosphate (DSP). These components were qualitatively and quantitatively determined using the HPLC, osmometry, and titration techniques. With derivatization techniques, EDTA, BKC, and DSP were determined by ion-interaction chromatography. NaCl in the formulation was quantified by measuring the osmolality and using the subtraction method. A titration method was also used. All the employed methods were linear, accurate, precise, and specific. The correlation coefficient was >0.999 for all components in all the methods. The recovery results ranged from 99.1 to 99.7% for EDTA, 99.1-99.4% for BKC, 99.8-100.8% for DSP, and 99.7-100.1% for NaCl. The obtained % relative standard deviation for precision was 0.9% for EDTA, 0.6% for BKC, 0.9% for DSP, and 1.34% for NaCl. The specificity of the methods in the presence of other components, diluent, and the mobile phase was confirmed, and the analytes were specific.

QbD-based stability-indicating liquid chromatography (RP-HPLC) method for the determination of flurbiprofen in cataplasm

A nonsteroidal drug called flurbiprofen (FBN) has analgesic, anti-inflammatory and antipyretic activity. Currently the determination of FBN in cataplasm does not have any pharmacopeial method. However, the drug substance, tablet and ophthalmic solution formulations do have pharmacopeial methods. The development and validation of an accurate, precise and stability-indicating analytical method for the determination of FBN in cataplasm formulations is reported. The gradient method was employed for the quantification of FBN in the presence of internal standards such as biphenyl. A nonpolar separation phase (C₁₈ , 250 × 4.6 mm, 5 μm Inertsil column; GL Sciences) was used. The optimal flow rate, column oven temperature, injection volume and detector wavelengths were 1.0 ml/min, 40°C, 20 μl and 245 nm, respectively. Mobile phase A was a mixture of water and glacial acetic acid (30:1 v/v) pH adjusted to 2.20 with glacial acetic acid or 1 m NaOH; mobile phase B was methanol (100%). The gradient elution program was [time (min)/% B]: 5/60, 20/70, 25/70, 30/60 and 40/60. The obtained RSDs for the precision and intermediate precision were 0.7 and 0.5%. The percentage recovery ranged from 99.2 to 100.4%. The linear regression coefficient >0.9996 indicates that all peak responses were linear with the concentration. The sample and standard solutions were stable for up to 24 h on the benchtop and in the refrigerator. The critical peaks were well separated from the generated peaks owing to forced degradation, including diluent and placebo peaks. The method validation data and quality by design-based robustness study results indicate that the developed method is robust and fit for routine use in the quality control laboratory. The proposed method is specific, accurate and precise, and the quality by design utilized the first method for the determination of FBN in cataplasm formulations. Transdermal patches and gels have low extraction capacity and this method is applicable for quantification.

Determination and quantification of related substances and degradation products in bictegravir by full factorial design evaluated HPLC and mass spectrometry

Determining and quantifying novel impurities and degraded impurities of a drug product is always a continuous challenge to enhancing the drug quality for patients' safety. Herein, our work deals with (i) developing a rapid, accurate, and reliable high-performance liquid chromatographic validation method to quantify the bictegravir drug (integrase inhibitors of antiretroviral drugs) and its novel related impurities at low levels, and (ii) the liquid chromatography-mass spectrometry (LC-MS) method to identify degraded impurities. Separation of bictegravir acid (impurity-I) and methyl bictegravir (impurity-II) impurities which are identified by LC-MS in the bictegravir drug was executed by developing a method and the same method performance evaluated by using full factorial design. This developed analytical technique gave a well-separated peak of bictegravir and related analytes such as bictegravir acid (impurity-I) and methyl bictegravir (impurity-II), adequate with the peak properties as per USP guidelines. The method's sensitivity and linearity are demonstrated by its detection and quantification limits at low levels with a correlation coefficient of 0.998. The method's repeatability, specificity, and accuracy suggest that this developed technique is a reliable determination strategy for the bictegravir drug substance and its related impurities (impurity-I and impurity-II) in a simple, feasible, and affordable way.

A combined qualitative and quantitative method development and validation of vancomycin hydrochloride injection formulation by HPLC and UV involving quality by design

A selective, specific, precise, linear, accurate and robust analytical method was developed and validated for the assay of vancomycin HCl in vancomycin hydrochloride injection. Comparative UV spectrophotometric and reverse-phase HPLC were used to develop the quantitative determination. Acetonitrile and pH 2.2 phosphate buffer in the ratio 20:80 v/v were used as the mobile phase, and a flow rate of 1.0 ml/min with a 20 min run time. The detection was carried out at 235 nm with a Nucleosil C₁₈ (250 × 4.6 mm) 10 μm column, and the ambient column temperature was maintained. The method uses a 20 μl injection volume and diluent as a blank solution in this connection. The method was validated as per the current regulatory guidelines. The linearity of this method was found to be linear in the range of 50-150% of the working concentration, and the correlation coefficient was >0.999. The method's accuracy was within the acceptable range, which was 98.1-101.5%. The method's precision was within an acceptable range of about 0.32% RSD. The analytical solution was stable for up to 48 h at room temperature. The method's robustness was proved by utilizing quality design tools. Stress studies demonstrated the method's stability-indicating nature.

Stability-Indicating RP-HPLC Method Development and Validation for Eltrombopag Olamine in the Presence of Impurities and Degradation Products. Robustness by Design of Expert Software

BACKGROUND

A simple and reliable HPLC method for determining impurities in eltrombopag olamine (ELO) film-coated tablets is not available. At the same time, there is no official monograph reported. The proposed research is targeted at the development of a stability-indicating method for determining impurities in ELO film-coated tablets and drug substances.

OBJECTIVE

To develop and validate a simple and effective HPLC method for determining impurities in ELO film-coated tablets and drug substances.

METHODS

All the impurities were separated using a reverse phase (RP)-HPLC system equipped with a Zorbax SB-Phenyl 150 mm × 4.6 mm, 3.5 µm, column with UV detection at 230 nm and a flow rate of 1.2 mL/min. The column temperature was maintained at 45°C.

RESULTS

The proposed method was validated as per current regulatory guidelines. The coefficient of correlation was found to be >0.999 for all impurities. The LOD and LOQ for ELO and all specified impurities were determined. The precision and accuracy were obtained for ELO and its related impurities. Intra- and inter-day RSD values were between 1.22 and 2.04%, and impurity recovery varied between 93.80 and 103.69%. The stability of standard and sample solutions was established for 24 h.

CONCLUSIONS

As per recent guidelines, a stability-indicating method has been developed to determine the impurities in ELO film-coated tablets and drug substances. QbD-based robustness was performed and proved that the method was robust.

HIGHLIGHTS

The proposed article is the first RP-HPLC method for determining impurities in ELO film-coated tablets and drug substances. The quality by design (QbD) concept was utilized to verify the method performance.