Preparation, Characterization, and In Vitro Evaluation of Inclusion Complexes Formed between S-Allylcysteine and Cyclodextrins

Light-responsive MXenegel via interfacial host-guest supramolecular bridging

Living in the global-changing era, intelligent and eco-friendly electronic components that can sense the environment and recycle or reprogram when needed are essential for sustainable development. Compared with solid-state electronics, composite hydrogels with multi-functionalities are promising candidates. By bridging the self-assembly of azobenzene-containing supramolecular complexes and MXene nanosheets, we fabricate a MXene-based composite gel, namely MXenegel, with reversible photo-modulated phase behavior. The MXenegel can undergo reversible liquefication and solidification under UV and visible light irradiations, respectively, while maintaining its conductive nature unchanged, which can be integrated into traditional solid-state circuits. The strategy presented in this work provides an example of light-responsive conducting material via supramolecular bridging and demonstrates an exciting platform for functional soft electronics.

Characterization, Preparation, and Promotion of Plant Growth of 1,3-Diphenylurea/β-Cyclodextrin Derivatives Inclusion Complexes

The study aimed to prepare inclusion complexes of 1,3-diphenylurea (DPU) with β-cyclodextrin (βCD) and 2-hydroxypropyl-β-cyclodextrin (HP-βCD) using a three-dimensional ground mixture (3DGM). Their physicochemical properties, intermolecular interactions, solubilities, and plant growth-promoting activities were investigated on broccoli sprouts. Phase-solubility diagrams indicated the stability constant (Ks) and complexation efficiency (CE) of βCD/DPU were found to be K1/1 = 250 M-1, CE = 2.48× 10-3. The Ks and CEs of HP-βCD/DPU were found to be K1/1 = 427 M-1, CE = 3.93 × 10-3 and K2/1 = 196 M-1, CE = 1.93 × 10-3 respectively. The powder X-ray diffraction results of 3DGM (βCD/DPU = 2/1, HP-βCD/DPU = 2/1) showed that the diffraction peaks originating from the DPU and βCD disappeared, indicating a halo pattern. Differential scanning calorimetry results showed an endothermic peak at 244 °C derived from the melting point of DPU, but the endothermic peak disappeared in the 3DGM (βCD/DPU = 2/1, HP-βCD/DPU = 2/1). Near-infrared absorption spectra showed peak shifts in 3DGM (βCD/DPU and HP-βCD/DPU) at the -CH and -NH groups of DPU and the -OH groups of βCDs and free water. In the dissolution test (after 5 min), the concentration of intact DPU was 0.083 μg/mL. However, the dissolution concentrations of DPU in the 3DGM (βCD/DPU = 1/1), 3DGM (βCD/DPU = 2/1), 3DGM (HP-βCD/DPU = 1/1), and 3DGM (HP-βCD/DPU = 2/1) were 3.27, 3.64, 5.70, and 7.03 μg/mL, respectively, indicating higher solubility than that of the intact DPU. Further, 1H-1H NOESY NMR spectroscopic measurements showed cross-peaks between H-A (7.32 ppm) and H-B (7.12 ppm) of DPU and H-6 (3.79 ppm) in the βCD cavity of the 3DGM (βCD/DPU = 2/1). A cross-peak was also observed among DPU H-A (7.32 ppm), H-B (7.11 ppm), and H-6 (3.78 ppm) in the βCD cavity. The results of the broccoli sprout cultivation experiment showed that 3DGM (βCD/DPU = 1/1), 3DGM (βCD/DPU = 2/1), 3DGM (HP-βCD/DPU = 1/1), and 3DGM (HP-βCD/DPU = 2/1) increased the stem thickness compared with that of the control group (DPU). These results indicated that the βCD/DPU and HP-βCD/DPU inclusion complexes were formed by the three-dimensional mixing and milling method, which enhanced the solubility and plant growth-promoting effects.

Drug-Facilitated Crystallization of Spray-Dried CD-MOFs with Tunable Morphology, Porosity, And Dissolution Profile

Metal-organic frameworks (MOFs) with versatile functionalities have applications in environmental science, sensor separation, catalysis, and drug delivery. In particular, MOFs used in drug delivery should be biodegradable and easy to control. In this study, spray-dried cyclodextrin-based MOFs (CD-MOFs) with tunable crystallinity, porosity, and dissolution properties were fabricated. The spray-drying precursor properties, such as ethanol volume ratio, incubation time, and precursor concentration, were optimized for controlled crystallization. On the basis of the morphology, X-ray diffraction peak intensity, and specific surface areas of the spray-dried CD-MOF products, they were categorized as amorphous, partially crystalline, and highly crystalline. An active pharmaceutical ingredient ketoconazole (KCZ) was introduced into the precursor to prepare KCZ-containing CD-MOFs. The surface areas of these products were greater by 3-fold (292 m2/g) than that of the plain CD-MOF (94.1 m2/g) prepared using the same parameters. The presence of KCZ in the hydrophobic cavity between the two γ-CD molecules was correlated to the CD-MOF crystal growth. Additionally, CD-MOF particles exhibited different dissolution behaviors on the basis of the position of KCZ in the MOF. These spray-dried CD-MOFs with tunable morphology, specific surface area, and dissolution could have potential applications in various fields.