Visible-Light-Driven Photocatalytic Degradation of Tetracycline Using Heterostructured Cu2O-TiO2 Nanotubes, Kinetics, and Toxicity Evaluation of Degraded Products on Cell Lines

How to deal with xenobiotic compounds through environment friendly approach?

Every year, a huge amount of lethal compounds, such as synthetic dyes, pesticides, pharmaceuticals, hydrocarbons, etc. are mass produced worldwide, which negatively affect soil, air, and water quality. At present, pesticides are used very frequently to meet the requirements of modernized agriculture. The Food and Agriculture Organization of the United Nations (FAO) estimates that food production will increase by 80% by 2050 to keep up with the growing population, consequently pesticides will continue to play a role in agriculture. However, improper handling of these highly persistent chemicals leads to pollution of the environment and accumulation in food chain. These effects necessitate the development of technologies to eliminate or degrade these pollutants. Degradation of these compounds by physical and chemical processes is expensive and usually results in secondary compounds with higher toxicity. The biological strategies proposed for the degradation of these compounds are both cost-effective and eco-friendly. Microbes play an imperative role in the degradation of xenobiotic compounds that have toxic effects on the environment. This review on the fate of xenobiotic compounds in the environment presents cutting-edge insights and novel contributions in different fields. Microbial community dynamics in water bodies, genetic modification for enhanced pesticide degradation and the use of fungi for pharmaceutical removal, white-rot fungi's versatile ligninolytic enzymes and biodegradation potential are highlighted. Here we emphasize the factors influencing bioremediation, such as microbial interactions and carbon catabolism repression, along with a nuanced view of challenges and limitations. Overall, this review provides a comprehensive perspective on the bioremediation strategies.

Photodegradation of Amoxicillin in Aqueous Systems: A Review

Amoxicillin (AMX) is utilized in the treatment of several infectious diseases, and its concentration in wastewater has increased quite significantly over the years, posing high health hazards for humans and other living organisms. Investigations are in progress globally to eliminate AMX and other related pollutants using several methods that include adsorption, photolysis, photocatalytic degradation, photoelectrocatalytic degradation, and electrochemical conversion. AMX can be eliminated efficiently from the environment using photodegradation, either by photolysis or a photocatalytic process. Several types of semiconductor NMs have been used to eliminate AMX and other related drugs present in wastewater. This review spans the photodegradation studies conducted during the years 2018-2024 to degrade and eliminate AMX in aquatic systems. Several studies have been reported to eliminate AMX from different water streams. These studies are categorized into TiO2-containing and non-TiO2-based catalysts for better comparison. A section on photolysis is also included, showing the use of UV alone or with H2O2 or PS without using any nanomaterial. A tabulated summary of both types of catalysts showing the catalysts, reaction conditions, and degradation efficiency is presented. Researchers have used a variety of reaction conditions that include radiation types (UV, solar, and visible), pH of the solution, concentration of AMX, number of nanomaterials, presence of other additives and activators such as H2O2 as oxidant, and the influence of different salts like NaCl and CaCl2 on the photodegradation efficiency. TiO2 was the best nanomaterial found that achieved the highest degradation of AMX in ultraviolet irradiation. TiO2 doped with other nanomaterials showed very good performance under visible light. WO3 was also used by several investigators and found quite effective for AMX degradation. Other metal oxides used for AMX elimination were derived from molybdenum, zinc, manganese, copper, cerium, silver, etc. Some researchers have used UV and/or visible irradiation or sunlight, without using solid catalysts, in the presence of oxidants such as H2O2. A summarized description of earlier published reviews is also presented.

Rational Design and Evaluation of Photoactive Molecularly Imprinted Nanoparticles for Tetracycline Degradation Under Visible Light

This work presents the use of photoactive molecularly imprinted nanoparticles (MINs) to promote antibiotic degradation under visible light irradiation. Prototype MINs for the model antibiotic tetracycline (TC) were developed using molecular dynamics simulations to predict the TC-binding capacity of seven pre-polymerization mixtures. The studied formulations contained varying proportions of functional monomers with diverse physicochemical profiles, namely N-isopropylacrylamide (NIPAM), N-tert-butylacrylamide (TBAM), acrylic acid (AA), and (N-(3-aminopropyl)methacrylamide hydrochloride) (APMA) and a constant ratio of the cross-linker N,N'-methylene-bis-acrylamide (BIS). Two monomer formulations showed markedly higher TC-binding capacities based on template-monomer interaction energies. These mixtures were used to synthesize photoactive MINs by high-dilution radical polymerization, followed by the EDC/NHS conjugation with the organic photosensitizer toluidine blue. MINs showed higher TC-binding capacities than non-imprinted nanoparticles (nINs) of identical composition. MINs and nINs exhibited photodynamic activity under visible light irradiation, as confirmed by singlet oxygen generation experiments. TC degradation was evaluated in 50 μmol L-1 solutions placed in microplate wells containing immobilized nanoparticles and irradiated with white LED light (150 W m-2) for 1 h at room temperature. Degradation followed pseudo-zero-order kinetics with accelerated profiles in MIN-containing wells. Our findings suggest a key role of molecularly imprinted cavities in bringing TC closer to the photosensitizing moieties, minimizing the loss of oxidative potential due to reactive oxygen species diffusion. This degradation strategy can potentially extend to any organic pollutants for which MINs can be synthesized and opens valuable opportunities for exploring novel applications for molecularly imprinted materials.

Role of Interfacial Morphology in Cu2O/TiO2 and Band Bending: Insights from Density Functional Theory

Photocatalysis, a promising solution to environmental challenges, relies on the generation and utilization of photogenerated charge carriers within photocatalysts. However, the recombination of these carriers often limits efficiency. Heterostructures, especially Cu2O/TiO2, have emerged as effective solutions to enhance charge separation. This study systematically explores the effect of interfacial morphologies on the band bending within Cu2O/TiO2 anatase heterostructures by employing density functional theory. Through this study, eight distinct interfaces are identified and analyzed, revealing a consistent staggered-type band alignment. Despite variations in band edge positions, systematic charge transfer from Cu2O to TiO2 is observed across all interfaces. The proposed band bending configurations would suggest enhanced charge separation and photocatalytic activity under ultraviolet illumination due to a Z-scheme configuration. This theoretical investigation provides valuable insights into the interplay between interfacial morphology, band bending, and charge transfer for advancing the understanding of fundamental electronic mechanisms in heterostructures.

Effects of Cation Exchange in Rhodamine B Photocatalytic Degradation Using Peroxo-Titanate Nanotubes

Lepidocrocite-type layered sodium titanate (NaxH2-xTi2O5) is widely used in environmental remediation because of its large specific surface area, formed by anisotropic crystal growth, and its ability to store and exchange cations between layers. Additionally, peroxo-titanate nanotubes (PTNTs), which are tubular titanates with peroxy groups, exhibit visible-light absorption capabilities, rendering them suitable for photocatalytic applications under visible light irradiation. However, because of cation exchange reactions, the Na+ concentration and pH of the solution can fluctuate under aqueous conditions, affecting the photocatalytic performance of the PTNTs. Herein, we evaluated the impact of cation exchange reactions on the photocatalytic degradation of Rhodamine B (Rh B) by PTNTs at controlled Na+ ratios. The observed pH of Rh B solutions increases due to the cation exchange reaction with Na+ and H3O+, leading to the formation of zwitter-ionic Rh B molecules, eventually weakening their adsorption and photodegradation performance. Moreover, the results indicate that inhibiting the pH increase of the Rh B solution can prevent the weakening of both the adsorption and photodegradation performance of PTNTs. This study highlights the significance of regulating the sodium ion content in layered titanate materials, emphasizing their importance in optimizing these materials' photocatalytic efficacy for environmental purification applications.

Wastewater Treatment Using High-Performance In Situ Formed Double-Heterojunction Janus Photocatalyst Microparticles Shaped via a Microfluidic Device

In this work, a heterogeneous photocatalysis system is fabricated for treating wastewater containing organic dyes and pharmaceutical substances. Double-heterojunction Janus photocatalysts are formed on the surface of size-tunable polydimethylsiloxane (PDMS) microparticles shaped via simple and low-cost coflow microfluidic devices. Ag0/Ag0-TiO2/TiO2 Janus-like photocatalysts are synthesized on the surface of porous PDMS microparticles as the support in which the metal-semiconductor heterojunction of Ag0/Ag0-TiO2 and the second heterojunction of Ag0-TiO2/TiO2 are created in situ, leading to the formation of Ag0/Ag0-TiO2/TiO2@PDMS photocatalysis systems. To form the heterojunctions on the PDMS surface, the polymer chain etching method is employed as a desired strategy to have half of the TiO2 nanoparticles on the surface of microparticles, which are treated by a Ag source. Using salt additives and the etching method, PDMS microparticles are made porous, providing more surface area for photoreactions. Surprisingly, the highest decomposition efficiencies of 94.4 and 91.1% are achieved for rhodamine B(RhB) and tetracycline (TC), respectively, under visible light for 60 min pH 11, a light source at a distance of 2 cm, 5 mM AgNO3, 10 wt % TiO2, 7 wt % NaCl, and 20 gm/L photocatalyst, which are conditions that result in the best performance for RhB degradation. Regarding the stability of the photocatalysts, no significant change is observed in the performance after five cycles.

Light-driven photocatalysis as an effective tool for degradation of antibiotics

Antibiotic contamination has become a severe issue and a dangerous concern to the environment because of large release of antibiotic effluent into terrestrial and aquatic ecosystems. To try and solve these issues, a plethora of research on antibiotic withdrawal has been carried out. Recently photocatalysis has received tremendous attention due to its ability to remove antibiotics from aqueous solutions in a cost-effective and environmentally friendly manner with few drawbacks compared to traditional photocatalysts. Considerable attention has been focused on developing advanced visible light-driven photocatalysts in order to address these problems. This review provides an overview of recent developments in the field of photocatalytic degradation of antibiotics, including the doping of metals and non-metals into ultraviolet light-driven photocatalysts, the formation of new semiconductor photocatalysts, the advancement of heterojunction photocatalysts, and the building of surface plasmon resonance-enhanced photocatalytic systems.

Facile Synthesis to Porous TiO2 Nanostructures at Low Temperature for Efficient Visible-Light Degradation of Tetracycline

In this study, nanoporous TiO2 with hierarchical micro/nanostructures was synthesized on a large scale by a facile one-step solvothermal method at a low temperature. A series of characterizations was performed and carried out on the as-prepared photocatalysts, which were applied to the degradation of the antibiotic tetracycline (TC). The results demonstrated that nanoporous TiO2 obtained at a solvothermal temperature of 100 °C had a spherical morphology with high crystallinity and a relatively large specific surface area, composed of a large number of nanospheres. The nanoporous TiO2 with hierarchical micro/nanostructures exhibited excellent photocatalytic degradation activity for TC under simulated sunlight. The degradation rate was close to 100% after 30 min of UV light irradiation, and reached 79% only after 60 min of visible light irradiation, which was much better than the photodegradation performance of commercial TiO2 (only 29%). Moreover, the possible intermediates formed during the photocatalytic degradation of TC were explored by the density functional theory calculations and HPLC-MS spectra. Furthermore, two possible degradation routes were proposed, which provided experimental and theoretical support for the photocatalytic degradation of TC. In this study, we provide a new approach for the hierarchical micro/nanostructure of nanoporous TiO2, which can be applied in industrial manufacturing fields.

Mo-BiVO4 Photocatalytically Modified Ceramic Ultrafiltration Membranes for Enhanced Water Treatment Efficiency

This study highlights the effectiveness of photocatalytically modified ceramic ultrafiltration (UF) membranes in alleviating two major drawbacks of membrane filtration technologies. These are the generation of a highly concentrated retentate effluent as a waste stream and the gradual degradation of the water flux through the membrane due to the accumulation of organic pollutants on its surface. The development of two types of novel tubular membranes, featuring photocatalytic Mo-BiVO4 inverse opal coatings, demonstrated a negligible impact on water permeance, ensuring consistent filtration and photocatalytic efficiency and suggesting the potential for maintaining membrane integrity and avoiding the formation of highly concentrated retentate effluents. Morphological analysis revealed well-defined coatings with ordered domains and interconnected macropores, confirming successful synthesis of Mo-BiVO4. Raman spectroscopy and optical studies further elucidated the composition and light absorption properties of the coatings, particularly within the visible region, which is vital for photocatalysis driven by vis-light. Evaluation of the tetracycline removal efficiency presented efficient adsorption onto membrane surfaces with enhanced photocatalytic activity observed under both UV and vis-light. Additionally, vis-light irradiation facilitated significant degradation, showcasing the versatility of the membranes. Total Organic Carbon (TOC) analysis corroborated complete solute elimination or photocatalytic degradation without the production of intermediates, highlighting the potential for complete pollutant removal. Overall, these findings emphasize the promising applications of Mo-BiVO4 photocatalytic membranes in sustainable water treatment and wastewater remediation processes, laying the groundwork for further optimization and scalability in practical water treatment systems.

Tailoring Interfacial Physicochemical Properties in Cu2O-TiO2@rGO Heterojunction: Insights from EXAFS and Electron Trap Distribution Analysis

In this study, a solution-based synthesis technique was utilized to produce Cu2O nanoparticles (NPs) on TiO2 nanofibers (TNF), which were then subsequently coated with reduced graphene oxide (rGO) nanosheets. In the absence of any cocatalyst, CTNF@rGO-3% composite displayed an ideal photocatalytic H2 evolution rate of 96 μmol g-1 h-1 under visible light irradiation, this was 10 times higher than that of pure TNF. At 420 nm, the apparent quantum efficiency of this composite reached a maximum of 7.18%. Kelvin probe force microscopy demonstrated the formation of an interfacial electric field that was oriented from CTNF to rGO and served as the driving force for interfacial electron transfer. The successful establishment of an intimate interface between CTNF@rGO facilitated the efficient transfer of charges and suppressed the rate of recombination of photogenerated electron-hole pairs, leading to a substantial enhancement in photocatalytic performance. X-ray photoelectron spectroscopy, photoluminescence spectra, and electrochemical characterization provide further confirmation that formation of a heterojunction between CTNF@rGO leads to an extension in the lifetimes of the photogenerated charge carriers. The experimental evidence suggests that a p-n heterojunction is the mechanism responsible for the significant photocatalytic activity observed in the CTNF@rGO composite during H2 evolution.

Effective sequestration of tetracycline from aqueous streams using metal-free chemically functionalized porous g-C3N4

The facile preparation of visible-light-driven low-cost photocatalysts with extraordinary catalytic activity is highly beneficial in treating emerging pharmaceutical contaminants. Herein, oxalic acid-induced chemically functionalized graphitic carbon nitride (OCN) was prepared using a one-pot calcination method for the degradation of tetracycline. The estimated structural, morphological, and optical properties proved the formation of highly porous oxalic acid functionalized g-C3N4 (OCN) with enhanced surface area and abundant amino groups. The photocatalytic degradation studies reported a maximum tetracycline removal of 92% within 90 min of visible light illumination and followed pseudo-first-order kinetics (k = 0.03068min-1). The phenomenal photocatalytic efficacy of the functionalized OCN is ascribed to the increased presence of amino groups, strengthening visible light absorption. The enriched surface area also generated many active sites for the reclamation of tetracycline. The radicals trapping studies show that holes and superoxides are mainly responsible for the redemption of tetracycline. The degradation pathways of the tetracycline using OCN were predicted using HRMS. This study provides more insights into the reclamation of tetracycline using a highly efficient metal-free photocatalyst.

Photocatalytic degradation of four emerging antibiotic contaminants and toxicity assessment in wastewater: A comprehensive study

Excessive usage and unrestricted discharge of antibiotics in the environment lead to their accumulation in the ecosystem due to their highly stable and non-biodegradation nature. Photodegradation of four most consumed antibiotics such as amoxicillin, azithromycin, cefixime, and ciprofloxacin were studied using Cu2O-TiO2 nanotubes. Cytotoxicity evaluation of the native and transformed products was conducted on the RAW 264.7 cell lines. Photocatalyst loading (0.1-2.0 g/L), pH (5, 7 and 9), initial antibiotic load (50-1000 μg/mL) and cuprous oxide percentage (5, 10 and 20) were optimized for efficient photodegradation of antibiotics. Quenching experiments to evaluate the mechanism of photodegradation with hydroxyl and superoxide radicals were found the most reactive species of the selected antibiotics. Complete degradation of selected antibiotics was achieved in 90 min with 1.5 g/L of 10% Cu2O-TiO2 nanotubes with initial antibiotic concentration (100 μg/mL) at neutral pH of water matrix. The photocatalyst showed high chemical stability and reusability up to five consecutive cycles. Zeta potential studies confirms the high stability and activity of 10% C-TAC (Cuprous oxide doped Titanium dioxide nanotubes for Applied Catalysis) in the tested pH conditions. Photoluminescence and Electrochemical Impedance Spectroscopy data speculates that 10% C-TAC photocatalyst have efficient photoexcitation in the visible light for photodegradation of antibiotics samples. Inhibitory concentration (IC50) interpretation from the toxicity analysis of native antibiotics concluded that ciprofloxacin was the most toxic antibiotic among the selected antibiotics. Cytotoxicity percentage of transformed products showed r: -0.985, p: 0.01 (negative correlation) with the degradation percentage revealing the efficient degradation of selected antibiotics with no toxic by-products.

Tetracycline Removal through the Synergy of Catalysis and Photocatalysis by Novel NaYF4:Yb,Tm@TiO2-Acetylacetone Hybrid Core-Shell Structures

Novel hybrid core-shell structures, in which up-converting (UC) NaYF₄:Yb,Tm core converts near-infrared (NIR) to visible (Vis) light via multiphoton up-conversion processes, while anatase TiO₂-acetylacetonate (TiO₂-Acac) shell ensures absorption of the Vis light through direct injection of excited electrons from the highest-occupied-molecular-orbital (HOMO) of Acac into the TiO₂ conduction band (CB), were successfully synthesized by a two-step wet chemical route. Synthesized NaYF₄:Yb,Tm@TiO₂-Acac powders were characterized by X-ray powder diffraction, thermogravimetric analysis, scanning and transmission electron microscopy, diffuse-reflectance spectroscopy, Fourier transform infrared spectroscopy, and photoluminescence emission measurement. Tetracycline, as a model drug, was used to investigate the photocatalytic efficiencies of the core-shell structures under irradiation of reduced power Vis and NIR spectra. It was shown that the removal of tetracycline is accompanied by the formation of intermediates, which formed immediately after bringing the drug into contact with the novel hybrid core-shell structures. As a result, ~80% of tetracycline is removed from the solution after 6 h.