Corrosion Inhibition of Azo Compounds Derived from Schiff Bases on Mild Steel (XC70) in (HCl, 1 M DMSO) Medium: An Experimental and Theoretical Study

Unraveling the corrosion inhibition behavior of prinivil drug on mild steel in 1M HCl corrosive solution: insights from density functional theory, molecular dynamics, and experimental approaches

The deterioration of mild steel in an acidic environment poses a significant challenge in various industries. The emergence of effective corrosion inhibitors has drawn attention to studies aimed at reducing the harmful consequences of corrosion. In this study, the corrosion inhibition efficiency of Prinivil in a 1M HCl solution through various electrochemical and gravimetric techniques has been investigated for the first time. The results demonstrated that the inhibition efficiency of Prinivil expanded from 61.37% at 50 ppm to 97.35% at 500 ppm concentration at 298 K. With a regression coefficient (R 2) of 0.987, Kads value of 0.935 and Ea value of 43.024 kJ/mol at 500 ppm concentration of inhibitor, a strong affinity of Prinivil for adsorption onto the metal surface has been significantly found. Scanning electron microscopy (SEM) and contact angle measurement analyses further support the inhibitory behavior of Prinivil, demonstrating the production of a defensive layer on the surface of mild steel. Additionally, molecular dynamics (MD) and Monte Carlo simulations were employed to investigate the stability and interactions between Prinivil and the metallic surface (Fe (1 1 0)) at the atomic level. The computed results reveal strong adsorption of Prinivil upon the steel surface, confirming its viability as a corrosion inhibitor.

Green Synthesizing and Corrosion Inhibition Characteristics of Azo Compounds on Carbon Steel under Sweet Conditions: Experimental and Theoretical Approaches

The deterioration of carbon steel in saline solutions enriched with carbon dioxide represents a significant challenge within the oil and gas industry. So, this study focuses on the design and structural analysis of four azo derivatives: 4-(2-quinolinylazo)-catechol (AZN-1), 4-(4-phenoxyphenylazo)-1-naphthol (AZN-2), 4-(4-pyridylazo)-1-naphthol (AZN-3), and 4-(2-pyridylazo)-1-naphthol (AZN-4), and their first application as effective corrosion inhibitors for carbon steel in a carbon dioxide saturated 3.5% sodium chloride solution. Spectroscopic methods were used to characterize the structural configurations of these compounds. The corrosion protection properties of these compounds on carbon steel in a carbon dioxide saturated 3.5% sodium chloride solution (under sweet conditions) were investigated using Tafel polarization (PDP), electrochemical impedance spectroscopy (EIS), and field emission-scanning electron microscopy (FE-SEM) studies. The results indicate that the inhibition efficiency increases as the concentration of the inhibitors increases. There is a notable agreement between the results obtained from the PDP and EIS measurements, supporting the findings. Moreover, the results displayed that these compounds had significant corrosion protection capabilities at low concentrations, ranging from 91.0 to 98.3% at an additive concentration of 5 × 10-4 M. The PDP profiles showed that these compounds acted as mixed inhibitors, and their adsorption behavior followed the Langmuir isotherm model. Besides, EIS results corroborate the adsorption of AZN compounds through a reduction in double-layer capacitance (Cdl) alongside an augmentation in polarization resistance (Rp) after the addition of AZN compounds into the corrosive solution. Field emission scanning electron microscopy (FE-SEM) and Fourier-transform infrared spectroscopy (FTIR) analysis confirmed the formation of a protective layer on the surface of carbon steel when these inhibitors were applied. In addition, computational calculations and Monte Carlo simulations were performed to support the experimental observations, gain insights into the adsorption properties, and elucidate the corrosion inhibition mechanisms of these compounds.

Fabrication of Protective Organic Layer Using Schiff-Base Metal Complex Responsible for Excellent Corrosion Performance: Experimental and Theoretical Perspectives

The effectiveness of a copper(II) complex with a Schiff base derived from 2-amino-4-phenyl-5-methylthiazole and salicylaldehyde (APMS) as a corrosion inhibitor for XC18 steel in an HCl solution was investigated. Experimental findings indicated a slight negative correlation between inhibition efficiencies in 1 M HCl and temperature but a positive correlation with both inhibitor concentration and immersion time, respectively. The weight loss measurement revealed that APMS achieved a maximum inhibition rate of 92.07% at 303 K. A fitting analysis demonstrated that APMS adheres to the Langmuir adsorption isotherm. The electrochemical results revealed an enhanced inhibitive performance of APMS, with the efficiency increasing as concentrations increased, ultimately reaching a peak of 94.47% at 5 × 10-3 mol L-1. Potentiodynamic polarization measurements revealed that APMS acted as a mixed-type inhibitor without affecting the corrosion mechanism. Scanning electron microscopy investigations of the metal surfaces corroborated the presence of an adsorbed organic layer. Advanced theoretical calculations utilizing density functional theory and first-principles density-functional tight-binding were conducted to gain insights into the behavior of APMS on the metal surface. APMS derives its advantages from crucial inter- and intramolecular interactions, resulting in the formation of a resilient adsorption layer, in line with the experimental findings. It is found that the presence of the APMS-based inhibitor exhibits a significant synergistic corrosion inhibition effect. The current study offers a design direction for enhancing the structural characteristics of Schiff base metal complexes, laying the groundwork for multifunctional frameworks to minimize corrosion rates with considerations for real-world use and cost-efficiency. The ability to replace harmful, expensive constituents with sustainable, and cost-effective organic alternatives represents a significant outcome of this study.

Effect of Adsorption and Interactions of New Triazole-Thione-Schiff Bases on the Corrosion Rate of Carbon Steel in 1 M HCl Solution: Theoretical and Experimental Evaluation

Due to the unique properties of steel, including its hardness, durability, and superconductivity, which make it an essential material in many industries, it lacks corrosion resistance. Herewith, two novel triazole-thione Schiff bases, namely, (E)-5-methyl-4-((thiophen-2-ylmethylene)amino)-2,4-dihydro-3H-1,2,4-triazole-3-thione (TMAT) and (E)-4-(((5-(dimethylamino)thiophen-2-yl)methylene)amino)-5-methyl-2,4-dihydro-3H-1,2,4-triazole-3-thione (DMTMAT), were synthesized and characterized. The corrosion inhibition (CI) ability of these two molecules on carbon steel in an aqueous solution of 1 M HCl as well as their interaction with its surface was studied using a number of different techniques. The results confirmed that the CI capability of these organic molecules depends on their strong adsorption on the metal surface and the formation of a protective anticorrosion film. Weight loss tests revealed that the inhibition efficiencies of TMAT and DMTMAT were 91.1 and 94.0%, respectively, at 1 × 10-3 M concentrations. The results of electrochemical impedance spectroscopy (EIS) indicated that there was a direct relationship between the inhibitor concentration and the transfer resistance. Potentiodynamic polarization (PDP) experiments have proven to be mixed-type inhibitors of C-steel in aqueous hydrochloric acid solution and follow the Langmuir adsorption isotherm model. Several thermodynamic and kinetic parameters were calculated. The negative values of the adsorption-free energy are -36.7 and -38.5 kJ/mol for TMAT and DMTMAT, respectively, confirming the spontaneity of the adsorption process. The MD simulation study's findings show that the inhibitor molecules are nearly parallel to the metal surface. The interaction energy calculated by the MD simulation and the inhibitory trend are the same. The practical implementation is consistent with what the computer models predicted.

Synthesis, characterization, synergistic inhibition, and biological evaluation of novel Schiff base on 304 stainless steel in acid solution

A novel Schiff base [4-(morpholin-4-yl) benzylidenyl]thiosemicarbazide (MBT) was created by reaction condensation. The molecules of the products were verified by IR, 1HNMR, MS, and elemental techniques. The synergistic effect of KI with novel MBT on 304 stainless steel (SS) in acidic has been investigated experimentally and theoretically using DFT. The findings demonstrate that restriction efficacy on 304 SS improved with rising inhibitor concentrations, and this benefit was attributed to synergy when KI was injected. From EIS results, IE % increased with a higher concentration of MBT only and MBT + KI (from 100 to 600 ppm). MBT maximum IE % was 84.98%, at 600 ppm. MBT + KI, due to the I- ions synergistic effect, showed an IE% of about 95.48%, at 600 ppm. The adsorptions of MBT and MBT + KI on the surfaces of 304 SS are strongly fitted Langmuir adsorption isotherms. Thermodynamic parameters (Kads, ΔG0ads) were utilized. According to polarization findings, MBT behaves as a mixed-category antagonist. The Schiff base MBT was screened for its in vitro antimicrobial activities against some strains of bacteria and fungi. The result revealed that MBT proved to be an excellent candidate as a fungal agent being able to inhibit Aspergillus flavus.