Oxygen Gateway Effect of CeO2/La2O2SO4 Composite Oxygen Storage Materials

Negative Thermal Expansion in the Polymorphic Modification of Double Sulfate β-AEu(SO4)2 (A-Rb+, Cs+)

New polymorphic modifications of double sulfates β-AEu(SO₄)₂ (A-Rb⁺, Cs⁺) were obtained by the hydrothermal method, the structure of which differs significantly from the monoclinic modifications obtained earlier by solid-state methods. According to single-crystal diffraction data, it was found that the compounds crystallize in the orthorhombic system, space group Pnna, with parameters β-RbEu(SO₄)₂: a = 9.4667(4) Å, b = 13.0786(5) Å, c = 5.3760(2) Å, V = 665.61(5) ų; β-CsEu(SO4)2: a = 9.5278(5) Å, b = 13.8385(7) Å, c = 5.3783(3) Å, V = 709.13(7) ų. The asymmetric part of the unit cell contains one-half Rb⁺/Cs⁺ ion, one-half Eu³⁺ ion, both in special sites, and one SO₄^2- ion. Both compounds exhibit nonlinear negative thermal expansion. According to the X-ray structural analysis and theoretical calculations, the polarizing effect of the alkali metal ion has a decisive influence on the demonstration of this phenomenon. Experimental indirect band gaps of β-Rb and β-Cs are 4.05 and 4.11 eV, respectively, while the direct band gaps are 4.48 and 4.54 eV, respectively. The best agreement with theoretical calculations is obtained using the ABINIT package employing PAW pseudopotentials with hybrid PBE0 functional, while norm-conserving pseudopotentials used in the frame of CASTEP code and LCAO approach in the Crystal package gave worse agreement. The properties of alkali ions also significantly affect the luminescent properties of the compounds, which leads to a strong temperature dependence of the intensity of the ⁵D₀ → ⁷F₄ transition in β-CsEu(SO₄)₂ in contrast to much weaker dependence of this kind in β-RbEu(SO₄)₂.

Thermochemical Activity of Single- and Dual-Phase Oxide Compounds Based on Ceria, Ferrites, and Perovskites for Two-Step Synthetic Fuel Production

This study focuses on the generation of solar thermochemical fuel (hydrogen, syngas) from CO₂ and H₂O molecules via two-step thermochemical cycles involving intermediate oxygen-carrier redox materials. Different classes of redox-active compounds based on ferrite, fluorite, and perovskite oxide structures are investigated, including their synthesis and characterization associated with experimental performance assessment in two-step redox cycles. Their redox activity is investigated by focusing on their ability to perform the splitting of CO₂ during thermochemical cycles while quantifying fuel yields, production rates, and performance stability. The shaping of materials as reticulated foam structures is then evaluated to highlight the effect of morphology on reactivity. A series of single-phase materials including spinel ferrite, fluorite, and perovskite formulations are first investigated and compared to state-of-the-art materials. NiFe₂O₄ foam exhibits a CO₂-splitting activity similar to its powder analog after reduction at 1400 °C, surpassing the performance of ceria but with much slower oxidation kinetics. On the other hand, although identified as high-performing materials in other studies, Ce_0.9Fe_0.1O₂, Ca_0.5Ce_0.5MnO₃, Ce_0.2Sr_1.8MnO₄, and Sm_0.6Ca_0.4Mn_0.8Al_0.2O₃ are not found to be attractive candidates in this work (compared with La_0.5Sr_0.5Mn_0.9Mg_0.1O₃). In the second part, characterizations and performance evaluation of dual-phase materials (ceria/ferrite and ceria/perovskite composites) are performed and compared to single-phase materials to assess a potential synergistic effect on fuel production. The ceria/ferrite composite does not provide any enhanced redox activity. In contrast, ceria/perovskite dual-phase compounds in the form of powders and foams are found to enhance the CO₂-splitting performance compared to ceria.

Precursor accumulation on nanocarbons for the synthesis of LaCoO3 nanoparticles as electrocatalysts for oxygen evolution reaction

Oxygen evolution reaction (OER) is a key step in energy storage devices. Lanthanum cobaltite (LaCoO₃) perovskite is an active catalyst for OER in alkaline solutions, and it is expected to be a low-cost alternative to the state-of-the-art catalysts (IrO₂ and RuO₂) because transition metals are abundant and inexpensive. For efficient catalysis with LaCoO₃, nanosized LaCoO₃ with a high surface area is desirable for increasing the number of catalytically active sites. In this study, we developed a novel synthetic route for LaCoO₃ nanoparticles by accumulating the precursor molecules over nanocarbons. This precursor accumulation (PA) method for LaCoO₃ nanoparticle synthesis is simple and involves the following steps: (1) a commercially available carbon powder is soaked in a solution of the nitrate salts of lanthanum and cobalt and (2) the sample is dried and calcined in air. The LaCoO₃ nanoparticles prepared by the PA method have a high specific surface area (12 m² g⁻¹), comparable to that of conventional LaCoO₃ nanoparticles. The morphology of the LaCoO₃ nanoparticles is affected by the nanocarbon type, and LaCoO₃ nanoparticles with diameters of less than 100 nm were obtained when carbon black (Ketjen black) was used as the support. Further, the sulfur impurities in nanocarbons significantly influence the formation of the perovskite structure. The prepared LaCoO₃ nanoparticles show excellent OER activity owing to their high surface area and perovskite structure. The Tafel slope of these LaCoO₃ nanoparticles is as low as that of the previously reported active LaCoO₃ catalyst. The results strongly suggest that the PA method provides nanosized LaCoO₃ without requiring the precise control of chemical reactions, harsh conditions, and/or special apparatus, indicating that it is promising for producing active OER catalysts at a large scale.

A simple synthetic process for LaCoO₃ nanoparticles based on the accumulation of precursors on nanocarbon supports was presented. The LaCoO₃ nanoparticles showed excellent OER activity owing to their high surface area and perovskite structure.

Oxygen Exchange in Dual-Phase La0.65Sr0.35MnO3-CeO2 Composites for Solar Thermochemical Fuel Production

Increasing the capacity and kinetics of oxygen exchange in solid oxides is important to improve the performance of numerous energy-related materials, especially those for the solar-to-fuel technology. Dual-phase metal oxide composites of La_0.65Sr_0.35MnO₃-x%CeO₂, with x = 0, 5, 10, 20, 50, and 100, have been experimentally investigated for oxygen exchange and CO₂ splitting via thermochemical redox reactions. The prepared metal oxide powders were tested in a temperature range from 1000 to 1400 °C under isothermal and two-step cycling conditions relevant for solar thermochemical fuel production. We reveal synergetic oxygen exchange of the dual-phase composite La_0.65Sr_0.35MnO₃-CeO₂ compared to its individual components. The enhanced oxygen exchange in the composite has a beneficial effect on the rate of oxygen release and the total CO produced by CO₂ splitting, while it has an adverse effect on the maximum rate of CO evolution. Ex situ Raman and XRD analyses are used to shed light on the relative oxygen content during thermochemical cycling. Based on the relative oxygen content in both phases, we discuss possible mechanisms that can explain the observed behavior. Overall, the presented findings highlight the beneficial effects of dual-phase composites in enhancing the oxygen exchange capacity of redox materials for renewable fuel production.

Synthesis of Samarium OxysulfateSm2O2SO4 in the High-Temperature Oxidation Reaction and Its Structural, Thermal and Luminescent Properties

The oxidation process of samariumoxysulfide was studied in the temperature range of 500–1000 °C. Our DTA investigation allowed for establishing the main thermodynamic (∆Hº_exp = −654.6 kJ/mol) and kinetic characteristics of the process (E_a = 244 kJ/mol, A = 2 × 10¹⁰). The enthalpy value of samarium oxysulfate (ΔHºf (Sm₂O₂SO_4(monocl)) = −2294.0 kJ/mol) formation was calculated. The calculated process enthalpy value coincides with the value determined in the experiment. It was established that samarium oxysulfate crystallizes in the monoclinic symmetry class and its crystal structure belongs to space group C2/c with unit cell parameters a = 13.7442 (2), b = 4.20178 (4) and c = 8.16711 (8)Å, β = 107.224 (1)°, V = 450.498 (9)ų, Z = 4. The main elements of the crystalline structure are obtained and the cation coordination environment is analyzed in detail. Vibrational spectroscopy methods confirmed the structural model adequacy. The Sm₂O₂SO₄luminescence spectra exhibit three main bands easily assignable to the transitions from ⁴G_5/2 state to ⁶H_5/2, ⁶H_7/2, and ⁶H_9/2 multiplets.

Performance and Stability of Metal (Co, Mn, Cu)-Promoted La2O2SO4 Oxygen Carrier for Chemical Looping Combustion of Methane

Oxygen carrier materials based on La2O2SO4 and promoted by small amounts (1% wt.) of transition metals, namely Co, Mn and Cu, have been synthesized and characterized by means of X-ray diffraction (XRD), Brunauer–Emmett–Teller (BET), Temperature-programmed reduction/oxidation (TPR/TPO) and thermogravimetry-mass-Fourier transform infrared spectrometry (TG-MS-FTIR) experiments under alternating feeds in order to investigate their potential use for the Chemical Looping Combustion process using either hydrogen or methane as the fuel. The chemical looping reactivity is based on the reversible redox cycle of sulfur from S6+ in La2O2SO4 to S2− in La2O2S and entails a large oxygen storage capacity, but it generally requires high temperatures to proceed, challenging material stability and durability. Herein we demonstrate a remarkable improvement of lattice oxygen availability and activity during the reduction step obtained by cost-effective metal doping in the order Co > Mn > Cu. Notably, the addition of Co or Mn has shown a significant beneficial effect to prevent the decomposition of the oxysulfate releasing SO2, which is identified as the main cause of progressive deactivation for the unpromoted La2O2SO4.