Role of Anionic Surfactants in the Synthesis of Smart Microgels Based on Different Acrylamides

Development and characterization of colloidal pNIPAM-methylcellulose microgels with potential application for drug delivery in dentoalveolar tissue engineering strategies

Incorporation of growth factors, signaling molecules and drugs can be vital for the success of tissue engineering in complex structures such as the dentoalveolar region. This has led to the development of a variety of drug release systems. This study aimed to develop pNIPAM-methylcellulose microgels with different synthesis parameters based on a 23 full factorial design of experiments for this application. Microgel properties, including volume phase transition temperature (VPTT), hydrodynamic size, drug loading and release, and cytocompatibility were systematically evaluated. The results demonstrated successful copolymerization and development of the microgels, a hydrodynamic size ranging from ∼200 to ∼500 nm, and VPTT in the range of 34-39 °C. Furthermore, loading of genipin, capable of inducing odontoblastic differentiation, and its sustained release over a week was shown in all formulations. Together, this can serve as a solid basis for the development of tunable drug-delivering pNIPAM-methylcellulose microgels for specific tissue engineering applications.

Tuning the bis-hydrophilic balance of microgels: A tool to control the stability of water-in-water emulsions

HYPOTHESIS

The stability of purely aqueous emulsions (W/W) formed by mixing incompatible polymers, can be achieved through the Pickering effect of particles adsorption at the interface. However, there is, as yet, no guideline regarding the chemical nature of the particles to predict whether they will stabilize a particular W/W emulsion. Bis-hydrophilic soft microgels, made of copolymerized poly(N-isopropylacrylamide) (pNIPAM) and dextran (Dex), act as very efficient stabilizers for PEO/Dextran emulsions, because the two polymers have an affinity for each polymer phase.

EXPERIMENTS

The ratio between both components of the microgels is varied in order to modulate the bis-hydrophilic balance, the content of Dex compared to pNIPAM varying from 0 to 60 wt%. The partition between the two aqueous phases and the adsorption of microgels at the W/W interface is measured by confocal microscopy. The stability of emulsions is assessed via turbidity measurements and microstructural investigations under sedimentation or compression.

FINDINGS

The adsorption of particles and their partitioning is found to evolve progressively as a function of bis-hydrophilic balance. At room temperature, the stability of the resulting W/W emulsions also depends on the bis-hydrophilic balance with a maximum of stability for the particles containing 50%wt of Dex, for the Dex-in-PEO emulsions, while the PEO-in-Dex become stable above this value. The thermo-responsiveness of the microgels translates into stability inversion of the emulsions below 50 wt% of Dex in the microgels, whereas above 50 wt%, no emulsion is stable. This work paves the way of a guideline to design efficient and responsive W/W stabilizers.

Self-supported polypyrrole flexible electrodes for electrochemical reduction of nitrite

The efficiency of an electrochemical oxidation/reduction process strongly depends on the working electrode's surface area to volume ratio. By making electrodes flexible and employing different configurations such as roll-to-roll membrane, the surface area to volume ratio can be enhanced, therefore improving the overall efficiency of electrochemical processes. Conductive polymers emerge as a new framework to enable alternative electrochemical water treatment cell configurations. Self-standing polypyrrole flexible electrodes were synthesized by electropolymerization and evaluated on the treatment of an oxyanion pollutant: nitrite. Mechanical characterization through stress-strain curves and bending tests demonstrated high electrode resilience that sustained over 1000 bending cycles without impacting mechanical integrity or electrocatalytic responses. The electrocatalytic response towards nitrite reduction was assessed under linear scan voltammetry (LSV) and removal performance evaluated under potentiostatic conditions reaching 79% abatement of initial concentrations of nitrite of 15 mg/L [NO2--N]. Self-standing flexible electrodes appear as a novel framework to enable modular compact water treatment unit designs that maximize the electrode area/volume ratio and substitute expensive platinum group metal (PGMs) electrocatalysts.

CO2-responsive gels

CO₂-responsive materials undergo a change in chemical or physical properties in response to the introduction or removal of CO₂. The use of CO₂ as a stimulus is advantageous as it is abundant, benign, inexpensive, and it does not accumulate in a system. Many CO₂-responsive materials have already been explored including polymers, latexes, surfactants, and catalysts. As a sub-set of CO₂-responsive polymers, the study of CO₂-responsive gels (insoluble, cross-linked polymers) is a unique discipline due to the unique set of changes in the gels brought about by CO₂ such as swelling or a transformed morphology. In the past 15 years, CO₂-responsive gels and self-assembled gels have been investigated for a variety of emerging potential applications, reported in 90 peer-reviewed publications. The two most widely exploited properties include the control of flow (fluids) via CO₂-triggered aggregation and their capacity for reversible CO₂ absorption-desorption, leading to applications in Enhanced Oil Recovery (EOR) and CO₂ sequestration, respectively. In this paper, we review the preparation, properties, and applications of these CO₂-responsive gels, broadly classified by particle size as nanogels, microgels, aerogels, and macrogels. We have included a section on CO₂-induced self-assembled gels (including poly(ionic liquid) gels).

Growth of Smart Microgels in a Flow Reactor Scrutinized by In-Line SAXS

In this work, a continuous flow setup for in situ investigation of microgel growth with small-angle X-ray scattering (SAXS) is established. Poly(N-n-propylacrylamide) (PNNPAM) and poly(N-isopropylacrylamide) (PNIPAM) microgels are synthesized in H2O at different residence times inside a continuous flow reactor. The microgels are investigated by in situ SAXS and ex situ photon correlation spectroscopy. The size of the microgels was found to be reproducible in independent experiments with run times of up to 7 h. Already the scattering curves of the microgels with a time of residence of 15 min show a well-defined form factor. Further analysis of the scattering profiles confirms the spherical shape of the microgels. At a residence time of 2 min, the scattering intensity is significantly lower corresponding to a smaller particle size. The experimental conditions remain constant over time, which is crucial for long-time experiments. The PNNPAM system is found to be more suitable for the flow reactor experiment with in-line SAXS as it shows less polymer deposition in the tubing and forms particles with lower polydispersity. The presented reactor is characterized by a compact design and offers a plug-and-play setup close to the sample environment. This work paves the way for investigations of microgel growth at e.g. synchrotron X-ray beamlines.

Fluid interface-assisted assembly of soft microgels: recent developments for structures beyond hexagonal packing

Microgels adsorb to air/water and oil/water interfaces - a process driven by a significant reduction in interfacial tension. Depending on the available interface area per microgel, strong lateral deformation can be observed. Typically, hexagonally ordered structures appear spontaneously upon contact of the microgel shells. Transfer from the interface to solid substrates gives access to macroscopically sized microgel monolayers that are interesting for photonic and plasmonic studies as well as colloid-based lithography, for example. Significant efforts have been made to understand the phase behavior of microgels at different interfaces and to explore the available parameter space for achieving complex tessellations. In this review, we will discuss the most recent developments in the realization of microgel monolayers with structures beyond hexagonal packing.

Recent Advances in Microgels: From Biomolecules to Functionality

The emerging applications of hydrogel materials at different length scales, in areas ranging from sustainability to health, have driven the progress in the design and manufacturing of microgels. Microgels can provide miniaturized, monodisperse, and regulatable compartments, which can be spatially separated or interconnected. These microscopic materials provide novel opportunities for generating biomimetic cell culture environments and are thus key to the advances of modern biomedical research. The evolution of the physical and chemical properties has, furthermore, highlighted the potentials of microgels in the context of materials science and bioengineering. This review describes the recent research progress in the fabrication, characterization, and applications of microgels generated from biomolecular building blocks. A key enabling technology allowing the tailoring of the properties of microgels is their synthesis through microfluidic technologies, and this paper highlights recent advances in these areas and their impact on expanding the physicochemical parameter space accessible using microgels. This review finally discusses the emerging roles that microgels play in liquid-liquid phase separation, micromechanics, biosensors, and regenerative medicine.

Multifunctional Core-Shell Microgels as Pd-Nanoparticle Containing Nanoreactors With Enhanced Catalytic Turnover

In this work, we present core-shell microgels with tailor-made architecture and properties for the incorporation of palladium nanoparticles. The microgel core consists of poly-N-isopropylacrylamide (PNIPAM) copolymerized with methacrylic acid (MAc) as anchor point for the incorporation of palladium nanoparticles. The microgel shell is prepared by copolymerization of NIPAM and the UV-sensitive comonomer 2-hydroxy-4-(methacryloyloxy)-benzophenone (HMABP). The obtained core-shell architecture was analyzed by means of photon correlation spectroscopy, while the incorporated amount of HMABP was further confirmed via Fourier transform infrared spectroscopy. Subsequently, the microgel system was used for loading with palladium nanoparticles and their size and localization were investigated by transmission electron microscopy. The catalytic activity of the monodisperse palladium nanoparticles was tested by reduction of 4-nitrophenol to 4-aminophenol. The obtained reaction rate constants for the core-shell system showed enhanced activity compared to the Pd-loaded bare core system. Furthermore, it was possible to recycle the catalyst several times. Analysis via transmission electron microscopy revealed, that the incorporated palladium nanoparticles emerged undamaged after the reaction and subsequent purification process since no aggregation or loss in size was observed.

Synergistic Interaction and Binding Efficiency of Tetracaine Hydrochloride (Anesthetic Drug) with Anionic Surfactants in the Presence of NaCl Solution Using Surface Tension and UV–Visible Spectroscopic Methods

Surfactants are ubiquitous materials that are used in diverse formulations of various products. For instance, they improve the formulation of gel by improving its wetting and rheological properties. Here, we describe the effects of anionic surfactants on an anesthetic drug, tetracaine hydrochloride (TCH), in NaCl solution with tensiometry and UV–visible techniques. Various micellar, interfacial, and thermodynamic parameters were estimated. The outputs were examined by using different theoretical models to attain a profound knowledge of drug–surfactant mixtures. The presence of attractive interactions among drug and surfactant monomers (synergism) in mixed micelle was inferred. However, it was found that sodium dodecyl sulfate (SDS) showed greater interactions with the drug in comparison to sodium lauryl sarcosine (SLS). The binding of the drug with surfactants was monitored with a spectroscopic technique (UV–visible spectra). The results of this study could help optimize the compositions of these mixed aggregates and find the synergism between monomers of different used amphiphiles.

Electrochemically Initiated Synthesis of Polyacrylamide Microgels and Core-shell Particles

Herein, we developed a simple procedure for synthesizing micrometer-sized microgel particles as a suspension in an aqueous solution and thin films deposited as shells on different inorganic cores. A sufficiently high constant potential was applied to the working electrode to commence the initiator decomposition that resulted in gelation. Under hydrodynamic conditions, this initiation allowed preparing different morphology microgels at room temperature. Importantly, neither heating nor UV-light illumination was needed to initiate the polymerization. Moreover, thin films of the cross-linked gel were anchored on different core substrates, including silica and magnetic nanoparticles. Scanning electron microscopy and transmission electron microscopy imaging confirmed the microgel particles' and films' irregular shape and porous structure. Energy-dispersive X-ray spectroscopy indicated that the core coating with the microgel film was successful. Dynamic light scattering measured the micrometer size of gel particles with different combinations of acrylic monomers. Thermogravimetric analysis and the first-derivative thermogravimetric analysis revealed that the microgels' thermal stability of different compositions was different. Fourier-transform infrared and 13C NMR spectroscopy showed successful copolymerization of the main, functional, and cross-linking monomers.

Synthesis and physicochemical characterization of methacrylic acid modified Arabic gum microgel as potential drug carrier

Carbohydrate polymers microgels are non-toxic and biocompatible which can be readily used in applications such as drug delivery, medicine, and pharmacy. This work synthesized Arabic gum (AG) microgel and methacrylic acid modified Arabic gum microgel (AGMAA) via water in oil emulsion polymerization technique using Tween 20 as surfactant and hexane as the solvent. The microgels were characterized using various physicochemical analysis such as Fourier Transform Infrared spectroscopy, thermal stability using Differential Scanning Calorimetry, diffraction pattern analysis using X-Ray Diffraction, morphology observation using Field Emission Scanning Electron Microscope and zetasizer was used to analyze the size and zeta potential. The rate of deformation was higher in AG microgel compared to the AGMAA microgel. The particle size and zeta potential of AGMAA microgel were found larger and more negative than AG microgel, respectively. The microgels particle size and zeta potentials were found dependent on the amount of methacrylic acid as the modifying agents. The microgels were encapsulated with doxorubicin through the swelling method and the in-vitro release was studied in medium with pH 4.2 and 7.4. The results suggest the potentials of these microgels for drugs delivery.

Modulating acrylic acid content of nanogels for drug delivery & biocompatibility studies

Dual stimuli-responsive nanogels (NGs) have gained popularity in the field of bio medicine due to their versatile nature of applicability. Poly(N-isopropylacrylamide)-co-poly(acrylic acid) (pNIPAm-pAAc)-based NGs provide such dual stimuli-response with pNIPAm and pAAc providing thermal and pH-based responses, respectively. Studying the growth of these NGs, as well as, understanding the effect of the incorporation of pAAc in the NG matrix, is important in determining the physico-chemical properties of the NG. Studies have been conducted investigating the effect of increasing pAAc content in the NGs, however, these are not detailed in understanding its effects on the physico-chemical properties of the pNIPAm-pAAc-based NGs. Also, the biocompatibility of the NGs have not been previously reported using human whole blood model. Herein, we report the effect of different reaction parameters, such as surfactant amount and reaction atmosphere, on the growth of pNIPAm-pAAc-based NGs. It is shown that the size of the NGs can be precisely controlled from ~130 nm to ~400 nm, by varying the amount of surfactant and the reaction atmosphere. The effect of increasing incorporation of pAAc in the NG matrix on its physico-chemical properties has been investigated. The potential of these NGs as drug delivery vehicles is investigated by conducting loading and release studies of a model protein drug, cytochrome C (Cyt C) from the NGs at temperature above the volume phase transition temperature (VPTT) and acidic pH. An ex vivo human whole blood model was used to investigate biocompatibility of the NGs by quantifying inflammatory responses during NG exposure. The NGs did not induce any significant production of chemokine IL-8 or pro-inflammatory cytokines (IL-1β, IL-6, TNF-α), and the cell viability in human whole blood was maintained during 4 h exposure. The NGs did neither activate the complement system, as determined by low Terminal Complement Complex (TCC) activation and Complement Receptor 3 (CR3) activation assays, thereby overall suggesting that the NGs could be potential candidates for biomedical applications.

Temperature Controlled Loading and Release of the Anti-Inflammatory Drug Cannabidiol by Smart Microgels

CBD is a promising candidate for treatment of many diseases and plays a major role in the growing trend to produce high-end drugs from natural, renewable resources. In the present work, we demonstrate a way to incorporate the anti-inflammatory drug CBD into smart microgel particles. The copolymer microgels that we chose as carrier systems exhibit a volume phase transition temperature of 39 ∘C, which is just above normal body temperature and makes them ideal candidates for hyperthermia treatment. While a simple loading route of CBD was not successful due to the enormous hydrophobicity of CBD, an alternative route was developed by immersing the microgels in ethanol. Despite the expected loss of thermoresponsive behaviour of the microgel matrix due to the solvent exchange, a temperature-dependent release of CBD was detected by the material, creating an interesting question of interactions between CBD and the microgel particles in ethanol. Furthermore, the method developed for loading of the microgel particles with CBD in ethanol was further improved by a subsequent transfer of the loaded particles into water, which proves to be an even more promising approach due to the successful temperature-dependent release of the drug above the collapse temperature of the microgels.

Core-shell microgels as thermoresponsive carriers for catalytic palladium nanoparticles

Responsive core-shell microgels are promising systems for a stabilization of Pd nanoparticles and control of their catalytic activity. Here, poly-N-n-propylacrylamide (PNNPAM) was copolymerized with methacrylic acid to yield microgel core particles, which were subsequently coated with an additional, acid-free poly-N-isopropylmethacrylamide (PNIPMAM) shell. Both core and core-shell systems were used as pH- and temperature-responsive carrier systems for the incorporation of palladium nanoparticles. The embedded nanoparticles were found to have a uniform size distribution with diameters at around 20 nm. Their catalytic activity was investigated by following the kinetics of the reduction of p-nitrophenol to p-aminophenol using UV-vis spectroscopy. For the PNNPAM microgel core, the temperature dependence of the rate constant followed the Arrhenius equation, which is an unusual behaviour for thermoresponsive carrier systems but common for passive systems such as polyelectrolyte brushes. In contrast, the catalytic activity of nanoparticles embedded in microgel core-shell systems decreased drastically at the volume phase transition temperature (44 °C) of the PNIPMAM shell. Accordingly, a promising architecture of passive nanoparticle-carrying core and thermoresponsive shell was realized successfully.

Smart microgels as drug delivery vehicles for the natural drug aescin: uptake, release and interactions

In the present study, we show how acrylamide-based microgels can be employed for the uptake and release of the drug β-aescin, a widely used natural product with a variety of pharmacological effects. We show how aescin is incorporated into the microgel particles. It has an important influence on the structure of the microgels, by reducing their natural network-density gradient in the swollen state. Moreover, temperature-dependent measurements reveal how the incorporation of aescin stabilizes the microgel particles, while the volume phase transition temperature (VPTT) is almost constant, which is very important for the intended drug release. Finally, it is shown that upon increase of the temperature above the VPTT the particles are able to release aescin from their network, encouraging the use of this particular drug delivery system for hypothermia treatments.

Improved Smart Microgel Carriers for Catalytic Silver Nanoparticles

Acrylamide-based, thermoresponsive core-shell microgels with a linear phase transition region are used as improved carriers for catalytically active silver nanoparticles in the present study. In this context, we investigated the swelling behavior of the carriers and the stability of the silver nanoparticles inside the polymer network with photon correlation spectroscopy, transmission electron microscopy, and by following the surface plasmon resonance of the nanoparticles. Depending on the cross-linker content of the microgel core, we observed very good stability of the nanoparticles inside the microgel network, with nearly no bleeding or aggregation of the nanoparticles over several weeks for core cross-linker contents of 5 and 10 mol %. The architecture of the hybrid particles in the swollen state was investigated with cryogenic transmission electron microscopy. The particles exhibit a core-shell structure, with the silver nanoparticles located mainly at the interface between the core and shell. This architecture was not used before and seems to grant advanced stability to the nanoparticles inside the network in combination with good switchability of the catalytic activity. This was measured by following the reduction of 4-nitrophenole, which is a well-studied model reaction. The obtained Arrhenius plots show that similar to previous works, the swelling of the core and shell can influence the catalytic activity of the silver nanoparticles. As mentioned before, the cross-linker content of the core seems to be a very important parameter for the switchability of the catalytic activity. A higher cross-linker content of the core seems to be connected to a stronger influence of the carrier swelling degree on the catalytic activity of the silver nanoparticles.

PEGylated NiPAM microgels: synthesis, characterization and colloidal stability

The objective of this work is to synthesize highly stable thermoresponsive microgels that could be used in diverse applications. To achieve this, N-isopropylacrylamide (NiPAM) based microgels were first synthesized by surfactant-free precipitation polymerization of NiPAM in the presence of poly(ethylene glycol)methacrylate (PEG) as a macro-comonomer and methylenebisacrylamide (MBA) as a chemical crosslinker. By combining a complete set of techniques such as dynamic light scattering (DLS), scanning electron microscopy (SEM), zetametry, 1H NMR and micro-differential scanning calorimetry (μDSC), we clearly demonstrate that (i) the incorporation of the PEG chains controls the size and the polydispersity of the NiPAM-based microgels, whereas the thermal behavior in solution (enthalpy, volume phase transition temperature (VPTT)) remains almost the same as for pure NiPAM microgels; (ii) the PEG chains are mainly located on the microgel periphery; and (iii) the presence of the PEG chains strongly increases the colloidal stability of microgels in electrolyte solutions at high temperatures.

Fundamentals and applications of acrylamide based microgels and their hybrids: a review

Recent advances in synthesis, characterization and applications of acrylamide based polymer microgels and their hybrids are discussed for further development in this area.

Determination of Internal Density Profiles of Smart Acrylamide-Based Microgels by Small-Angle Neutron Scattering: A Multishell Reverse Monte Carlo Approach

The internal structure of nanometric microgels in water has been studied as a function of temperature, cross-linker content, and level of deuteration. Small-angle neutron scattering from poly( N-isopropylmethacrylamide) (volume phase transition ≈ 44 °C) microgel particles of radius well below 100 nm in D₂O has been measured. The intensities have been analyzed with a combination of polymer chain scattering and form-free radial monomer volume fraction profiles defined over spherical shells, taking polydispersity in size of the particles determined by atomic force microscopy into account. A reverse Monte Carlo optimization using a limited number of parameters was developed to obtain smoothly decaying profiles in agreement with the experimentally scattered intensities. The results are compared to the swelling curve of microgel particles in the temperature range from 15 to 55 °C obtained from photon correlation spectroscopy (PCS). In addition to hydrodynamic radii measured by PCS, our analysis provides direct information about the internal water content and gradients, the strongly varying steepness of the density profile at the particle-water interface, the total spatial extension of the particles, and the visibility of chains. The model has also been applied to a variation of the cross-linker content, N, N'-methylenebisacrylamide, from 5 to 15 mol %, providing insight on the impact of chain architecture and cross-linking on water uptake and on the definition of the polymer-water interface. The model can easily be generalized to arbitrary monomer contents and types, in particular mixtures of hydrogenated and deuterated species, paving the way to detailed studies of monomer distributions inside more complex microgels, in particular core-shell particles.

Smart Starch-Poly( N-isopropylacrylamide) Hybrid Microgels: Synthesis, Structure, and Swelling Behavior

In this study, we present hybrid microgels made of starch nanoparticles (SNPs) and poly( N-isopropylacrylamide) [p(NIPAM)]. SNPs were formed through nanoprecipitation. Hybrid microgels were prepared by surfactant-free precipitation polymerization (SFPP) or in the presence of surfactant precipitation polymerization (PP) at different NIPAM/SNP ratios. Dynamic light scattering results of hybrid microgels synthesized by SFPP revealed changes in volume phase transition temperature according to SNP amount, where the increase in the hydrophilic content caused small shifts in the lower critical solution temperature (LCST), reaching nearly 35 °C. Colloidal stability was improved with the SNP content, leading to increased stability because of the hydroxyl groups. Small-angle X-ray scattering indicates a core-shell structure above the LCST, where SNPs chains cover a p(NIPAM) core. Swelling curves experimentally obtained were analyzed using the Flory-Rehner model, where the interaction parameter (χ) has been modeled either by a series expansion of the swelling ratio or by a Hill-like equation for a cooperative thermotropic transition.