PyrrolylBODIPYs: Syntheses, Properties, and Application as Environment-Sensitive Fluorescence Probes

Synthesis and studies of covalently linked (BODIPY)2-3-pyrrolyl BODIPY triads

Two novel covalently linked triads containing one 3-pyrrolyl BODIPY unit and two BODIPY units were synthesized over a sequence of steps using meso-(p-formylphenyl)-3-pyrrolyl BODIPY as a key precursor. Both triads were thoroughly characterized and studied by using HRMS, 1D and 2D NMR spectroscopy, X-ray crystallography, absorption, steady-state and time-resolved fluorescence, cyclic voltammetry, and DFT/TD-DFT techniques. X-ray structural analysis of these triads revealed that the dipyrrin units of both meso-BODIPY and 3-pyrrolyl BODIPY were oriented in the same plane whereas the dipyrrin unit of the α-BODIPY unit was oriented almost perpendicular to that of the 3-pyrrolyl BODIPY unit. Both triads showed two well-separated absorption bands corresponding to BODIPY and 3-pyrrolyl BODIPY units in the 510-675 nm region. In these triads, the BODIPY unit absorbs in the higher energy region and acts as an energy donor whereas the 3-pyrrolyl BODIPY unit absorbs in the lower energy region and acts as an energy acceptor. Steady-state and time-resolved fluorescence studies of these triads indicated the possibility of intramolecular singlet-singlet energy transfer with almost 98% efficiency from the BODIPY units to the 3-pyrrolyl BODIPY unit upon selective excitation of the BODIPY unit in both triads. DFT and TD-DFT investigations corroborated the experimental findings.

Advancements in molecular disassembly of optical probes: a paradigm shift in sensing, bioimaging, and therapeutics

The majority of self-assembled fluorescent dyes suffer from aggregation-caused quenching (ACQ), which detrimentally affects their diagnostic and therapeutic effectiveness. While aggregation-induced emission (AIE) active dyes offer a promising solution to overcome this limitation, they may face significant challenges as the intracellular environment often prevents aggregation, leading to disassembly and posing challenges for AIE fluorogens. Recent progress in signal amplification through the disassembly of ACQ dyes has opened new avenues for creating ultrasensitive optical sensors and enhancing phototherapeutic outcomes. These advances are well-aligned with cutting-edge technologies such as single-molecule microscopy and targeted molecular therapies. This work explores the concept of disaggregation-induced emission (DIE), showcasing the revolutionary capabilities of DIE-based dyes from their design to their application in sensing, bioimaging, disease monitoring, and treatment in both cellular and animal models. Our objective is to provide an in-depth comparison of aggregation versus disaggregation mechanisms, aiming to stimulate further advancements in the design and utilization of ACQ fluorescent dyes through DIE technology. This initiative is poised to catalyze scientific progress across a broad spectrum of disciplines.

Targeted Photoconvertible BODIPYs Based on Directed Photooxidation-Induced Conversion for Applications in Photoconversion and Live Super-Resolution Imaging

Photomodulable fluorescent probes are drawing increasing attention due to their applications in advanced bioimaging. Whereas photoconvertible probes can be advantageously used in tracking, photoswitchable probes constitute key tools for single-molecule localization microscopy to perform super-resolution imaging. Herein, we shed light on a red and far-red BODIPY, namely, BDP-576 and BDP-650, which possess both properties of conversion and switching. Our study demonstrates that these pyrrolyl-BODIPYs convert into typical green- and red-emitting BODIPYs that are perfectly adapted to microscopy. We also showed that this pyrrolyl-BODIPYs undergo Directed Photooxidation Induced Conversion, a photoconversion mechanism that we recently introduced, where the pyrrole moiety plays a central role. These unique features were used to develop targeted photoconvertible probes toward different organelles or subcellular units (plasma membrane, mitochondria, nucleus, actin, Golgi apparatus, etc.) using chemical targeting moieties and a Halo tag. We notably showed that BDP-650 could be used to track intracellular vesicles over more than 20 min in two-color imagings with laser scanning confocal microscopy, demonstrating its robustness. The switching properties of these photoconverters were studied at the single-molecule level and were then successfully used in live single-molecule localization microscopy in epithelial cells and neurons. Both membrane- and mitochondria- targeted probes could be used to decipher membrane 3D architecture and mitochondrial dynamics at the nanoscale. This study builds a bridge between the photoconversion and photoswitching properties of probes undergoing directed photooxidation and shows the versatility and efficacy of this mechanism in advanced live imaging.

Synthesis, Structure, Spectral, Electrochemical, and Theoretical Studies of Ru(II) Complexes of 3-Pyrrolyl BODIPY-Based Ligands

3-Pyrrolyl BODIPY having an appended pyrrolyl group at the 3-position of BODIPY (4,4-difluoro-4-bora-3a,4a-diaza-s-indacene) and its functionalized derivatives have been used as ligands to prepare one example of Ru(II) complex of pyrrolyl dipyrrin and three unique examples of bichromophoric BODIPY-Ru(II) complexes in good yields. The complexes were characterized by HR-MS, 1D and 2D NMR, X-ray analysis for two complexes, absorption, cyclic voltammetry, and DFT/TD-DFT techniques. The X-ray structure of the Ru(II) complex of pyrrolyl dipyrrin revealed that the geometry around the Ru(II) ion was pseudo-octahedral with an arene unit occupying three coordination sites in η6-fashion and two nitrogen atoms of the dipyrrin ring and one chloro group adopting the "three legs piano-stool" structure. The X-ray structure of the bichromophoric BODIPY-Ru(II) complex revealed that the BODIPY core was planar and the central B(III) was coordinated with two pyrrole nitrogens of the dipyrrin unit and two axial fluoride ions in a tetrahedral geometry, and Ru(II) was bonded to appended pyrrole "N" and "N" of benzimidazole substituent present at the α-position of appended pyrrole, one chloro group, and one arene ring in a pseudo-octahedral geometry. The spectral studies revealed that the electronic properties of the BODIPY unit in BODIPY-Ru(II) complexes were significantly altered, and electrochemical studies indicated that the BODIPY-Ru(II) complexes exhibit one oxidation corresponding to Ru(II) to Ru(III) and one reduction corresponding to the BODIPY unit. The DFT/TD-DFT studies corroborated the experimental observations.

Covalent Proximity Scanning of a Distal Cysteine to Target PI3Kα

Covalent protein kinase inhibitors exploit currently noncatalytic cysteines in the adenosine 5′-triphosphate (ATP)-binding site via electrophiles directly appended to a reversible-inhibitor scaffold. Here, we delineate a path to target solvent-exposed cysteines at a distance >10 Å from an ATP-site-directed core module and produce potent covalent phosphoinositide 3-kinase α (PI3Kα) inhibitors. First, reactive warheads are used to reach out to Cys862 on PI3Kα, and second, enones are replaced with druglike warheads while linkers are optimized. The systematic investigation of intrinsic warhead reactivity (k_chem), rate of covalent bond formation and proximity (k_inact and reaction space volume V_r), and integration of structure data, kinetic and structural modeling, led to the guided identification of high-quality, covalent chemical probes. A novel stochastic approach provided direct access to the calculation of overall reaction rates as a function of k_chem, k_inact, K_i, and V_r, which was validated with compounds with varied linker lengths. X-ray crystallography, protein mass spectrometry (MS), and NanoBRET assays confirmed covalent bond formation of the acrylamide warhead and Cys862. In rat liver microsomes, compounds 19 and 22 outperformed the rapidly metabolized CNX-1351, the only known PI3Kα irreversible inhibitor. Washout experiments in cancer cell lines with mutated, constitutively activated PI3Kα showed a long-lasting inhibition of PI3Kα. In SKOV3 cells, compounds 19 and 22 revealed PI3Kβ-dependent signaling, which was sensitive to TGX221. Compounds 19 and 22 thus qualify as specific chemical probes to explore PI3Kα-selective signaling branches. The proposed approach is generally suited to develop covalent tools targeting distal, unexplored Cys residues in biologically active enzymes.

Torsion-Induced Nonradiative Relaxation of the Singlet Excited State of meso-Thienyl Bodipy and Charge Separation, Charge Recombination-Induced Intersystem Crossing in Its Compact Electron Donor/Acceptor Dyads

We prepared a series of meso-thienyl boron-dipyrromethene (Bodipy) derivatives to investigate the spin-orbit charge transfer intersystem crossing (SOCT-ISC). The photophysical properties of the compounds were studied by steady-state and femtosecond/nanosecond transient absorption spectroscopy, as well as density functional theory (DFT) computations. Different from the meso-phenyl Bodipy analogues, the meso-thienyl Bodipy are weakly fluorescent. Based on femtosecond transient absorption and DFT computations, we propose that the torsion of the thienyl group and the distortion of the Bodipy core (19.7 ps) in the S₁ state lead to a conical intersection on the potential energy surface as an efficient nonradiative decay channel (408 ps), which is responsible for the observed weak fluorescence as compared to the meso-phenyl analogue. The increased fluorescence quantum yield (from 5.5 to 14.5%) in viscous solvents supports this hypothesis. With the electron donor 4'-hydroxylphenyl moiety attached to the meso-thienyl unit, the fast charge separation (CS, 15.3 ps) and charge recombination (CR, 238 ps) processes outcompete the torsion-induced nonradiative decay and induce fast ISC through the SOCT-ISC mechanism. The triplet quantum yield of the electron donor/acceptor dyad is highly dependent on solvent polarity (Φ_T = 1.9-45%), which supports the SOCT-ISC mechanism, and the triplet-state lifetime is up to 247.3 μs. Using the electron donor-acceptor dyad showing SOCT-ISC as a triplet photosensitizer, efficient triplet-triplet annihilation (TTA) upconversion was observed with a quantum yield of up to 6.0%.

Tuning the optical properties of BODIPY dyes by N-rich heterocycle conjugation using a combined synthesis and computational approach

We report a systematic tuning of optical properties of BODIPY dyes by conjugation of nitrogen-rich heterocycles, and underlying nitrogen influence by TDDFT calculations.

Effect of Short PEG on Near-Infrared BODIPY-Based Activatable Optical Probes

Targeted near-infrared (NIR) fluorescence probes are playing a significant role in biomedical imaging because NIR penetrates deeper into tissues and is associated with reduced autofluorescence compared to visible light fluorescence probes. Long-wavelength emitting 4,4-difluoro-4-bora-3a,4a-diaza-s-indacene (BODIPY) is an attractive platform for synthesizing NIR fluorophores because of its high photostability, high molar absorption coefficient, and sharp absorption and emission spectra. However, its lipophilicity hampers the conjugation chemistry necessary to add targeting moieties. In this study, we synthesized a novel NIR BODIPY derivative, NMP14. Substitutions of ethylene-bridged pyrrole units at the 3- or 5-position of the parent BODIPY chromophore result in a red shift of more than 200 nm. However, NMP14 cannot be conjugated to antibodies because of its hydrophobicity. Therefore, we synthesized NMP13 by adding short poly(ethylene glycol) to NMP14 and successfully conjugated NMP13 to cetuximab and trastuzumab. In vitro microscopic studies showed that NMP13 conjugated antibodies were activated after internalization and lysosomal processing, which means that NMP13 acts as an activatable probe only turning on after cellular internalization. After the administration of NMP13 conjugated antibodies, mice tumors were detected with high tumor to background ratios for a long period. These results suggest that NMP13 has potential as an activatable fluorescence probe for further clinical applications.

A Personal Journey across Fluorescent Sensing and Logic Associated with Polymers of Various Kinds

Our experiences concerning fluorescent molecular sensing and logic devices and their intersections with polymer science are the foci of this brief review. Proton-, metal ion- and polarity-responsive cases of these devices are placed in polymeric micro- or nano-environments, some of which involve phase separation. This leads to mapping of chemical species on the nanoscale. These devices also take advantage of thermal properties of some polymers in water in order to reincarnate themselves as thermometers. When the phase separation leads to particles, the latter can be labelled with identification tags based on molecular logic. Such particles also give rise to reusable sensors, although molecular-scale resolution is sacrificed in the process. Polymeric nano-environments also help to organize rather complex molecular logic systems from their simple components. Overall, our little experiences suggest that researchers in sensing and logic would benefit if they assimilate polymer concepts.