Turning Carbon Black to Hollow Carbon Nanospheres for Enhancing Charge Storage Capacities of LiMn2O4, LiCoO2, LiNiMnCoO2, and LiFePO4 Lithium-Ion Batteries

Simple, green organic acid-based hydrometallurgy for waste-to-energy storage devices: Recovery of NiMnCoC2O4 as an electrode material for pseudocapacitor from spent LiNiMnCoO2 batteries

A simple, green approach to recover NiMnCoC₂O₄ as an electrode material for high-performance pseudocapacitors from spent LiNiMnCoO₂ (NMC) batteries is proposed. Four strategic metals (Li, Ni, Co, and Mn) were leached from spent NMC batteries using several organic acids as model green leachants. Among the various candidates of green leaching agents, 2 M citric acid and 5 wt% glucose were selected as the leachant and reductant, respectively. Microwave irradiation was conducted during the leaching step to maximize the performance of the leaching rate and efficiency. The leaching efficiencies within 0.5 h for Ni(II), Li(I), Mn(II), and Co(II) were 90.7 ± 1.6%, 98.3 ± 2.4%, 94.9 ± 4.3%, and 95.6 ± 1.4%, respectively, and were thus as efficient as using aqua regia leaching. After the leaching process, divalent metal ions, that is, Ni(II), Co(II), and Mn(II), were immediately separated at room temperature using oxalic acid. The recovered samples were not further treated and used directly for energy storage applications. The recovered NiMnCoC₂O₄⋅nH₂O has been demonstrated as a promising electrode for pseudocapacitors, providing a specific capacitance of 1641 F/g, good rate-retention capability (80% of low-current capacitance), and good cycle stability over 4000 charge-discharge cycles.

Enhancing Lithium Manganese Oxide Electrochemical Behavior by Doping and Surface Modifications

Lithium manganese oxide is regarded as a capable cathode material for lithium-ion batteries, but it suffers from relative low conductivity, manganese dissolution in electrolyte and structural distortion from cubic to tetragonal during elevated temperature tests. This review covers a comprehensive study about the main directions taken into consideration to supress the drawbacks of lithium manganese oxide: structure doping and surface modification by coating. Regarding the doping of LiMn2O4, several perspectives are studied, which include doping with single or multiple cations, only anions and combined doping with cations and anions. Surface modification approach consists in coating with different materials like carbonaceous compounds, oxides, phosphates and solid electrolyte solutions. The modified lithium manganese oxide performs better than pristine samples, showing improved cyclability, better behaviour at high discharge c-rates and elevated temperate and improves lithium ions diffusion coefficient.

Analysis of Activation Process of Carbon Black Based on Structural Parameters Obtained by XRD Analysis

In the present study, carbon black activated by CO2 gas was examined through XRD analysis, especially with regard to changes in its structural parameters. Based on the results, its activation process was thoroughly analyzed. The activation process was controlled by isothermally activating the carbon black inside a reaction tube through which CO2 gas flowed. With this approach, the degree of activation was varied as desired. At an early stage of the activation process, the amorphous fraction on the carbon black surface was preferentially activated, and later the less-developed crystalline carbon (LDCC) region inside the carbon black particles started to be activated. The latter process was attributable to the formation of pores inside the carbon black particles. As the activation process proceeded further, the more-developed crystalline carbon (MDCC) region started to be activated, thereby causing the pores inside the carbon black particles to grow larger. At the last stage of the activation process, La was found to be decreased to about 40 Å. This implied that the edges of the graphite crystals had been activated, thus causing the internal pores to grow and coalesce into larger pores. Activated conductive Super-P with enhanced pore properties is expected to have wide applications.