Quest for Thermoresponsive Block Copolymer Nanoparticles with Liquid-Crystalline Surfactant Cores

Complexes of Charged-Neutral Block Copolymers and Surfactants: Process-Dependent Features and Long-Term Stability of Their Aqueous Dispersions

Aqueous dispersions of charged-neutral block copolymers (poly(acrylamide)-b-poly(acrylate)) complexed with an oppositely charged surfactant (dodecyltrimethylammonium) have been prepared by different approaches: the simple mixing of two solutions (MS approach) containing the block copolymer and surfactant, with their respective simple counterions, and dispersion of a freeze-dried complex salt prepared in the absence of simple counterions (CS approach). The CS particles were investigated under different conditions: dispersion of a CS in salt-free water and dispersion of a CS in a dilute salt solution, the latter condition yielding dispersions with the same composition as the MS process. Additionally, aged dispersions (up to 6 months) and dispersed complexes of the polyacrylate homopolymer and dodecyltrimethylammonium surfactant were evaluated. By employing different characterization techniques, it was seen that dispersions prepared by the MS approach display nanometric spherical particles with disordered cores, and poor colloidal stability, partially caused by the absence of surface charge (ζ-potential close to zero). Oppositely, anisometric particles were formed in CS dispersions and were large enough to sustain micellar cubic cores. The CS particles presented long-time colloidal stability, partially due to a net negative surface charge, but the stability varied with the length of the neutral block composing the corona. Our results demonstrate that all dispersed particles are metastable structures, with physicochemical properties strongly dependent on the preparation procedure, thus making these particles suitable for fundamental studies and potential applications where accurate control of their properties, including size, shape, internal structure, and stability, is desired.

Surfactant and Block Copolymer Nanostructures: From Design and Development to Nanomedicine Preclinical Studies

The medical application of nanotechnology in the field of drug delivery has so far exhibited many efforts in treating simple to extremely complicated and life-threatening human conditions, with multiple products already existing in the market. A plethora of innovative drug delivery carriers, using polymers, surfactants and the combination of the above, have been developed and tested pre-clinically, offering great advantages in terms of targeted drug delivery, low toxicity and immune system activation, cellular biomimicry and enhanced pharmacokinetic properties. Furthermore, such artificial systems can be tailor-made with respect to each therapeutic protocol and disease type falling under the scope of personalized medicine. The simultaneous delivery of multiple therapeutic entities of different nature, such as genes and drugs, can be achieved, while novel technologies can offer systems with multiple modalities often combining therapy with diagnosis. In this review, we present prominent, innovative and state-of-the-art scientific efforts on the applications of surfactant-based, polymer-based, and mixed surfactant-polymer nanoparticle drug formulations intended for use in the medical field and in drug delivery. The materials used, formulation steps, nature, properties, physicochemical characteristics, characterization techniques and pharmacokinetic behavior of those systems, are presented extensively in the length of this work. The material presented is focused on research projects that are currently in the developmental, pre-clinical stage.

Versatile Diblock Polyampholytes Can Form Two Types of Charged and Internally Structured Core-Shell Particles by Complexation with Cationic or Anionic Surfactants

We used diblock poly(acrylic acid)-b-poly(2-dimethylamino ethyl methacrylate) (PAA-b-PDMAEMA) polyampholytes to prepare core-shell complexes with ionic surfactants. The dispersions have been characterized by means of small-angle X-ray scattering (SAXS), cryogenic transmission electron microscopy (Cryo-TEM), dynamic light-scattering, and zeta potential methods. Using cationic or anionic surfactants it is possible to produce particles with either positively or negatively charged shells, both having an internal liquid-crystalline core structure. For the different systems, different preparation protocols were found to be successful to produce stable and reproducible particles. The particle morphologies depend on the surfactant used. Complexes with the cationic surfactant hexadecyltrimethylammonium (CTA⁺) form oblate particles, while complexes with dodecyl sulfate (DS^-) form cylindrical rods. In both complexes, the smallest dimension of the core does not exceed twice the block length of the core-forming polymer block. For the particles with CTA⁺, nonelectrostatic attractive interactions among the PDMAEMA chains in the shells seem to be present, affecting the particle shape. In both types of particles, the surfactant in the core forms rod-like aggregates, arranged in a two-dimensional hexagonal structure with the surfactant rods aligned with the axis of rotational symmetry in the particle. With charged polymer chains in the shell, the aggregates present a striking stability over time, displaying no change in particle size over the time scale investigated (10 months). Nevertheless, the aggregates are highly dynamic in nature, and their shapes and structures can be changed dramatically in dispersion, without intermediate precipitation, by changes in the composition of the medium. Specifically, a transition from aggregates with cationic surfactant to aggregates with anionic surfactant can be achieved.

Molecular Assembly in Block Copolymer-Surfactant Nanoparticle Dispersions: Information on Molecular Exchange and Apparent Solubility from High-Resolution and PFG NMR

Internally structured block copolymer-surfactant particles are formed when the complex salts of ionic-neutral block copolymers neutralized by surfactant counterions are dispersed in aqueous media. Here, we report the ¹H NMR signal intensities and self-diffusion coefficients (D, from pulsed field gradient nuclear magnetic resonance, PFG NMR) of trimethyl alkylammonium surfactant ions and the poly(acrylamide)-block-poly(acrylate) (PAAm-b-PA) polyions forming such particles. The results reveal the presence of an “NMR-invisible” (slowly exchanging) fraction of aggregated surfactant ions in the particle core and an “NMR-visible” fraction consisting of surface surfactant ions in rapid exchange with the surfactant ions dissociated into the aqueous domain. They also confirm that the neutral PAAm blocks are exposed to water at the particle surface, while the PA blocks are buried in the particle core. The self-diffusion of the polyions closely agree with the self-diffusion of a hydrophobic probe molecule solubilized in the particles, showing that essentially all copolymer chains are incorporated in the aggregates. Through centrifugation, we prepared macroscopically phase-separated systems with a phase concentrated in particles separated from a clear dilute phase. D values for the surfactant and block copolymer indicated that the dilute phase contained small aggregates (ca. 5 nm) of surfactant ions and a few anionic-neutral block copolymer chains. Regardless of the overall concentration of the sample, the fraction of block copolymer found in the dilute phase was nearly constant. This indicates that the dilute fraction represented a tail of small particles created by the dispersion process rather than a true thermodynamic solubility of the complex salts.

Hydrophilic Submicron Nanogel Particles for Specific Recombinant Proteins Extraction and Purification

In biomedical diagnosis and bionanotechnologies, the extraction and purification of proteins and protein derivatives are of great interest. In fact, to purify recombinant proteins for instance, new methodologies and well appropriate material supports need to be established and also to be evaluated. In this work, hydrophilic nanohydrogel particles were prepared for recombinant proteins extraction for purification purpose. The prepared nanohydrogel polymer-based particles are hydrophilic below the volume phase transition temperature (TVPT) and dehydrated above the TVPT, due to the thermally sensitive poly(N-alkyl acrylamide) and poly(N-alkyl methacrylamide) derivatives. Then, the use of heavy metal ions in the presence of such functional particles should specifically capture recombinant proteins (i.e., proteins bearing a poly(histidine) part). In order to understand and to optimize the specific capture and the purification of recombinant proteins, various parameters have been investigated as a systematic study. Firstly, the adsorption was investigated as a function of pH and protein concentration. According to high hydration of the prepared nanohydrogel, no marked adsorption was observed. Secondly, the effect of pH was investigated and found to be the driven parameter affecting the metal ions immobilization and the recombinant proteins complexation. As a result, high protein complexation was observed at basic pH compared to non-complexation at acidic pH medium. The immobilized proteins via complexation were released by changing the pH. This decomplexation seems to be effective but depends on fixation conditions and particle surface structure.

Formation and assembly of amphiphilic Janus nanoparticles promoted by polymer interactions

Almost three decades after de Gennes have introduced the term Janus for particles possessing two faces with different chemical nature, Janus particles are currently a hot topic in itself. Although de Gennes was not concerned with the size of particles, due to the advent and perspectives of nanotechnology, nanosized Janus particles have particularly received great attention. The capacity of having two antagonistic properties within the same particle has attracted interest on Janus nanoparticles for innumerous potential applications. It took some years for the studies about Janus nanoparticles to finally see great advances, mainly due to the progress in nanoparticle synthesis. What de Gennes might have not predicted (or at least he did not mention it during his speech) is that intermolecular interactions between polymers would be of immense importance to the actual achievement of Janus nanoparticles. Moreover, these interactions can also have large effects on the assembly process of amphiphilic Janus nanoparticles, which is important to form hierarchical structures and new materials at different scales. Hence, it is interesting to notice that de Gennes' contribution for the polymer field has been influencing the preparation and the controlled assembly of Janus nanoparticles. This article attempts to summarize empirical studies where noncovalent forces between polymers played a role, either on the production of Janus nanoparticles or on their assembly.

Block copolymers as bile salt sequestrants: intriguing structures formed in a mixture of an oppositely charged amphiphilic block copolymer and bile salt

To study the formation and characterize the structure of mixed complexes of oppositely charged block copolymers and surfactants are of great significance for practical applications, e.g., in drug carrier formulations that are based on electrostatically assisted assembly. In this context, biocompatible block copolymers and biosurfactants (like bile salts) are particularly interesting. In this work, we report on the co-assembly in dilute aqueous solution between a cationic poly(N-isopropyl acryl amide) (PNIPAM) diblock copolymer and the oppositely charged bile salt surfactant sodium deoxycholate at ambient temperature. The cryogenic transmission electron microscopy (cryo-TEM) experiments revealed the co-existence of two types of co-assembled complexes of radically different morphology and inner structure. They are formed mainly as a result of the electrostatic attraction between the positively charged copolymer blocks and bile salt anions and highlight the potential of using linear amphiphilic block copolymers as bile salt sequestrants in the treatment of bile acid malabsorption and hypercholesterolemia. The first complex of globular morphology has a coacervate core of deoxycholate anions and charged copolymer blocks surrounded by a PNIPAM corona. The second complex has an intriguing tape-like supramolecular morphology of several micrometer in length that is striped in the direction of the long axis. A model is presented in which the stretched cationic blocks of several block copolymers interact electrostatically with the bile salt molecules that are associated to form a zipper-like structure. The tape is covered on both sides by the PNIPAM chains that stabilize the overall complex in solution. In addition to cryo-TEM, the mixed system was investigated in a range of molar charge fractions at a constant copolymer concentration by static light scattering, small angle X-ray scattering, and electrophoretic mobility measurements.