Surface-Active Ionic Liquid Cholinium Dodecylbenzenesulfonate: Self-Assembling Behavior and Interaction with Cellulase

Self-assembly of choline-based surface-active ionic liquids and concentration-dependent enhancement in the enzymatic activity of cellulase in aqueous medium

The micellization of choline-based anionic surface-active ionic liquids (SAILs) having lauroyl sarcosinate [Sar]-, dodecylsulfate [DS]-, and deoxycholate [Doc]- as counter-ions was investigated in an aqueous medium. Density functional theory (DFT) was employed to investigate the net interactional energy (Enet), extent of non-covalent interactions, and band gap of the choline-based SAILs. The critical micelle concentration (cmc) along with various parameters related to the surface adsorption, counter-ion binding (β), and polarity of the cores of the micelles were deduced employing surface tension measurements, conductometric titrations and fluorescence spectroscopy, respectively. A dynamic light scattering (DLS) system equipped with zeta-potential measurement set-up and small-angle neutron scattering (SANS) were used to predict the size, zeta-potential, and morphology, respectively, of the formed micelles. Thermodynamic parameters such as standard Gibb's free energy and standard enthalpy change of micellization were calculated using isothermal titration calorimetry (ITC). Upon comparing with sodium salt analogues, it was established that the micellization was predominantly governed by the extent of hydration of [Cho]+, the head groups of the respective anions, and the degree of counter-ion binding (β). Considering the concentration dependence of the enzyme-SAIL interactions, aqueous solutions of the synthesized SAILs at two different concentrations (below and above the cmc) were utilized as the medium for testing the enzymatic activity of cellulase. The activity of cellulase was found to be ∼7- to ∼13-fold higher compared to that observed in buffers in monomeric solutions of the SAILs and followed the order: [Cho][Sar] > [Cho][DS] > [Cho][Doc]. In the micellar solution, a ∼4- to 5-fold increase in enzymatic activity was observed.

Do Ionic Liquids Exhibit the Required Characteristics to Dissolve, Extract, Stabilize, and Purify Proteins? Past-Present-Future Assessment

Proteins are highly labile molecules, thus requiring the presence of appropriate solvents and excipients in their liquid milieu to keep their stability and biological activity. In this field, ionic liquids (ILs) have gained momentum in the past years, with a relevant number of works reporting their successful use to dissolve, stabilize, extract, and purify proteins. Different approaches in protein-IL systems have been reported, namely, proteins dissolved in (i) neat ILs, (ii) ILs as co-solvents, (iii) ILs as adjuvants, (iv) ILs as surfactants, (v) ILs as phase-forming components of aqueous biphasic systems, and (vi) IL-polymer-protein/peptide conjugates. Herein, we critically analyze the works published to date and provide a comprehensive understanding of the IL-protein interactions affecting the stability, conformational alteration, unfolding, misfolding, and refolding of proteins while providing directions for future studies in view of imminent applications. Overall, it has been found that the stability or purification of proteins by ILs is bispecific and depends on the structure of both the IL and the protein. The most promising IL-protein systems are identified, which is valuable when foreseeing market applications of ILs, e.g., in "protein packaging" and "detergent applications". Future directions and other possibilities of IL-protein systems in light-harvesting and biotechnology/biomedical applications are discussed.

Dielectric Depiction of 1-Butyl-3-methylimidazolium Tetrafluoroborate/1-Butyl-3-methylimidazolium 1,4-Bis(2-ethylhexyl) Sulfosuccinate/Benzene Microemulsions: Percolation, Interface Polarization, and Electrical Parameters

Two dielectric relaxations located at approximately 10 and 300 MHz were analyzed in the microemulsion composed of the polar ionic liquid (PIL) 1-butyl-3-methylimidazolium tetrafluoroborate ([bmim][BF4]), the surface-active ionic liquid (SAIL) 1-butyl-3-methylimidazolium 1,4-bis(2-ethylhexyl) sulfosuccinate ([bmim][AOT]), and benzene. The curve of the dc conductivity vs PIL weight fraction shows two inflection points, namely, 16.69 and 27.90 wt %, which are used to divide the PIL/O, bicontinuous (B.C.), and O/PIL subregions. The critical exponents of percolation u = 0.75, 0.79, and 0.80 are suggested from the scaling dependence of dc conductivity on the PIL weight fraction, together with frequency dependences of both permittivity and loss angle, which all infer that static percolation occurs in the microemulsion. Only one dielectric relaxation at high frequency was observed in the PIL/O subregion, when the concentration increased to the boundary between the PIL/O and B.C. subregions; the second dielectric relaxation appeared at low frequency. The high-frequency relaxation is caused by interfacial polarization. The low-frequency relaxation is attributed to the dipole-oriented polarization of AOT-. When the oil content of the system was reduced, the interface became softer to allow more AOT- to rotate, and the cation shifted from moving around its long axis to rotating along its short axis. The static dielectric constant of [bmim][AOT] was given. The dielectric constants and conductivity of the dispersed and continuous phases in the PIL/O and O/PIL subregions were calculated from the dielectric parameters of high-frequency relaxation.

Gemini ionic liquid-based surfactants: efficient synthesis, surface activity, and use as inducers for the fabrication of Cu2O nanoparticles

Discovery of green and novel synthetic routes for nanoparticles (NPs) has drawn a lot of interest due to the distinct nano size and unusual features as well as applications of such particles. Ionic liquid-based surfactants (ILBSs) and gemini ionic liquid-based surfactants (GILBSs) have become some of the best choices to be used as inducers or dispersing agents for the fabrication of nanoparticles. This work involves the synthesis, spectroscopic characterization, and surface property evaluation of three novel GILBSs (4a-c), which incorporate the imidazolium cation as the polar head with an ethylene spacer. The simple synthetic route includes, first, alkylating imidazole-N1 with the as-prepared fatty alkyl chloroacetates followed by quaternization of two equivalents of imidazole-N2 with ethylene dibromide. Investigations into the compounds' surface characteristics and thermodynamic parameters were carried out. The prepared GILBSs, 4a-c, were then used as inducers at various concentrations for the preparation of cuprous oxide nanoparticles. The size and shape of the produced NPs were examined by X-ray diffraction (XRD) and transmission electron microscopy (TEM) analysis in each case to study the effect of concentration on the NP morphology and to determine the best concentration for the NPs fabrication. The XRD patterns of the produced Cu2O NPs contain distinguishable peaks, which refer to crystalline Cu2O. Also, TEM images show that the obtained Cu2O is present in form of well dispersed nanorod particles with sizes about 55 and 23 nm at concentrations of 60 and 200 ppm, respectively.

CNSL, a Promising Building Blocks for Sustainable Molecular Design of Surfactants: A Critical Review

Surfactants are crystallizing a certain focus for consumer interest, and their market is still expected to grow by 4 to 5% each year. Most of the time these surfactants are of petroleum origin and are not often biodegradable. Cashew Nut Shell Liquid (CNSL) is a promising non-edible renewable resource, directly extracted from the shell of the cashew nut. The interesting structure of CNSL and its components (cardanol, anacardic acid and cardol) lead to the synthesis of biobased surfactants. Indeed, non-ionic, anionic, cationic and zwitterionic surfactants based on CNSL have been reported in the literature. Even now, CNSL is absent or barely mentioned in specialized review or chapters talking about synthetic biobased surfactants. Thus, this review focuses on CNSL as a building block for the synthesis of surfactants. In the first part, it describes and criticizes the synthesis of molecules and in the second part, it compares the efficiency and the properties (CMC, surface tension, kraft temperature, biodegradability) of the obtained products with each other and with commercial ones.

pH Changes in the Micelle-Water Interface of Surface-Active Ionic Liquids Dictate the Stability of Encapsulated Curcumin: An Insight Through a Unique Interfacial Reaction between Arenediazonium Ions and t-Butyl Hydroquinone

The chemical kinetic (CK) method, which involves the reduction of 4-hexadecylbenzenediazonium ions (16-ArN₂ ⁺) by antioxidants (in the present case, TBHQ) occurring exclusively at the interface of the association colloids, was employed to establish the changes in the chemical reactivity of anionic surface-active ionic liquids (SAILs) as a function of the concentration and the composition in their mixed states. We used sodium dodecyl sulfate and different SAILs based on the dodecylsulfate surfactant containing 1-alkyl-3-methylimidazolium cations as counterions having a varying alkyl chain length of 4 (bmim), 8 (omim), and 12 (ddmim) carbon atoms. The structural transitions of aggregates of the SAILs from the micellar to vesicular form were observed as a function of concentration in single surfactant systems and as a function of composition in mixed surfactant systems. Results of the reduction kinetics of 16-ArN₂ ⁺ at the interface of such aggregates, which depends on the acid/base equilibria at the interface, gave an insight into the changes in the interfacial H⁺ ions with the change in the hydrophobicity of the counterions of SAILs and the morphological changes from micelles to vesicles as a function of concentration or composition. These changes in the interfacial pH correlate very well with the stability of curcumin within these self-assemblies, which exclusively depends on the pH of the medium and highlights the importance of the results obtained from the CK method in selecting the appropriate medium/conditions for the stabilization of the bioactive molecules.

Viscoelastic Fluid Formed by Ultralong-Chain Erucic Acid-Base Ionic Liquid Surfactant Responds to Acid/Alkaline, CO2, and Light

As a leftover of grease processing, the efficient utilization of erucic acid is still a challenge. An alternative strategy is to develop erucic acid-derived surfactants. However, erucic acid-based ionic liquid surfactants were barely involved. Here, a novel ionic liquid surfactant, benzyltrimethylammonium erucate (ErBTA), was developed by a simple neutralization reaction, and its aggregations in the diluted and concentrated solution were systematically studied by surface tension, conductivity, rheology, and cryo-TEM techniques. The results showed that ErBTA has a very low metaling point (-7.03 °C) and possesses excellent water solubility (Krafft temperature <4 °C). ErBTA alone starts to form micelles at a very low concentration (0.028 mmol/L) and then to form worm-based viscoelastic fluid at 4.07 mmol/L without any additives, exhibiting excellent self-assembly ability and thickening ability. This viscoelastic fluid formed by ErBTA can simultaneously respond to three stimuli: common acid/alkaline, CO₂ gas, and light, accompanied by an interesting gel-sol conversion, reflecting microstructure transition from wormlike micelles to spherical micelles. Although in essence CO₂ and light also act as pH regulators in the current system, they provide more sophisticated approaches to tune pH. Such a viscoelastic fluid with the characteristics of easy availability, renewability of raw materials, the simplicity of fabrication, good water-solubility, and excellent thickening ability may be an attractive candidate for clean fracturing in oil/gas recovery and fluid drag reduction.

Biocompatibility of Biomaterials for Nanoencapsulation: Current Approaches

Nanoencapsulation is an approach to circumvent shortcomings such as reduced bioavailability, undesirable side effects, frequent dosing and unpleasant organoleptic properties of conventional drug delivery systems. The process of nanoencapsulation involves the use of biomaterials such as surfactants and/or polymers, often in combination with charge inducers and/or ligands for targeting. The biomaterials selected for nanoencapsulation processes must be as biocompatible as possible. The type(s) of biomaterials used for different nanoencapsulation approaches are highlighted and their use and applicability with regard to haemo- and, histocompatibility, cytotoxicity, genotoxicity and carcinogenesis are discussed.

Structural-functional integrity of lysozyme in imidazolium based surface active ionic liquids

The present study was designed to explore the hydrophobicity and concentration dependence of imidazolium based surface active ionic liquids (SAILs) effects on the structural-functional integrity of proteins. Specifically, we investigated the impact of SAILs viz. 1-octyl-3-methylimidazolium dodecylbenzenesulfonate ([OMIM][DBS]) and 1-dodecyl-3-methylimidazolium dodecylbenzenesulfonate ([DDMIM][DBS]) on activity, structure and stability of lysozyme. Activity measurements revealed that, in contrast to [DDMIM][DBS] that renders lysozyme either feebly active or inactive, [OMIM][DBS] significantly enhances the lysozyme activity in the concentration range of critical aggregation concentrations (CAC) to C_s (SAIL saturation concentration of protein backbone) i.e., 0.5 mM-1.35 mM. Tensiometric results in agreement with turbidity measurements inferred significant composition and concentration dependence of the lysozyme-SAIL interactions. Spectroscopic investigations revealed that compared to destabilizing behaviour of [DDMIM][DBS], [OMIM][DBS] significantly enhances both conformational as well as thermal stability of lysozyme in the CAC to C_s concentration regime. Altogether, results obtained do indicate that [OMIM][DBS], in the concentration regime of CAC to C_s, serves as an efficient stabiliser with an ability to appreciably enhance the activity, thermal stability and overall conformational stability of lysozyme. We firmly believe that [OMIM][DBS], at least in the CAC to C_s concentration ranges, can be exploited as a promising stabiliser and activity enhancer for numerous industrially important enzymes.

Isothermal titration calorimetry and surface plasmon resonance analysis using the dynamic approach

Biophysical techniques such as isothermal titration calorimetry (ITC) and surface plasmon resonance (SPR) are routinely used to ascertain the global binding mechanisms of protein-protein or protein-ligand interaction. Recently, Dumas etal, have explicitly modelled the instrument response of the ligand dilution and analysed the ITC thermogram to obtain kinetic rate constants. Adopting a similar approach, we have integrated the dynamic instrument response with the binding mechanism to simulate the ITC profiles of equivalent and independent binding sites, equivalent and sequential binding sites and aggregating systems. The results were benchmarked against the standard commercial software Origin-ITC. Further, the experimental ITC chromatograms of 2′-CMP + RNASE and BH3I-1 + hBCL_XL interactions were analysed and shown to be comparable with that of the conventional analysis. Dynamic approach was applied to simulate the SPR profiles of a two-state model, and could reproduce the experimental profile accurately.

•

Incorporated instrument response within the kinetic framework using dynamic approach to analyse ITC and SPR data.

•

Different modelling approaches for instrument response such as lumped and kinetic modelling were compared and their equivalence were shown.

•

(1) equivalent single site, (2) equivalent sequential sites, (3) equivalent parallel sites and (4) aggregating molecular system were modelled using dynamic approach.

Magnetic proline-based ionic liquid surfactant as a nano-carrier for hydrophobic drug delivery

Biofriendly and magnetic proline based ionic liquid surfactant demonstrated for drug delivery system.

Aggregation behaviour of biocompatible choline carboxylate ionic liquids and their interactions with biomolecules through experimental and theoretical investigations

The self-assembly of long-chain choline carboxylates accompanied by their interaction with BSA protein were investigated with focus on environmental sustainability.