Electronic and Optical Properties of Ultrasmall ABX3 (A = Cs, CH3NH3/B = Ge, Pb, Sn, Ca, Sr/X = Cl, Br, I) Perovskite Quantum Dots

Electronic Structure and Optical Properties of Inorganic Pm3m and Pnma CsPbX3 (X = Cl, Br, I) Perovskite: A Theoretical Understanding from Density Functional Theory Calculations

In this study, we investigated the optoelectronic properties of cubic (Pm3m) and orthorhombic (Pnma) CsPbX3 (X = I, Br, and Cl). We utilized the full potential linear augmented plane wave method, which is implemented in the WIEN2k code, to facilitate the investigation. Different exchange potentials were used to analyze the optoelectronic behavior using the available density functional theory methods. Our findings revealed that CsPbX3 perovskites display direct band gaps at the R and Г points for cubic (Pm3m) and orthorhombic (Pnma) structures, respectively. Among the exchange potentials, the mBJ-GGA method provided the most accurate results. These outcomes concurred with the experimental results. In both Pm3m and Pnma structures, interesting changes were observed when iodide (I) was replaced with bromine (Br) and then chlorine (Cl). The direct band gap at the R and Г points shifted to higher energy levels. Similarly, when I was replaced with Br and Cl, there was a noticeable decrease in the absorption coefficient, dielectric constants, refractive index, and reflectivity, in addition to a band gap shift to higher energy levels.

Energy transfer between Si nanocrystals and protoporphyrin molecules as a function of distance, orientation and size

The interaction between protoporphyrin molecules (donor) and Si nanocrystals (acceptor) up to 2.5 nm for varying distances and orientations is studied by DFT, semi-empirical and TDDFT methods. Simulations show an effect on electronic structure, indicative of electron charge transfer in parallel orientation and small distances and nonelectron energy transfer for different orientations and larger distances. An absorption-emission spectral overlap is observed. The calculations of coupling and energy transfer rates show a distance dependence typical of fluorescence resonance energy transfer (FRET) in the long range, while in the short and ultra-short range the distance dependence indicates electron transfer in addition to FRET. The Si NCs with the smallest size yield larger couplings than the larger nanocrystals. The PPIX/Si NC coupling was enhanced by adding a plasmon nanoparticle as a bridge in the donor-acceptor system. Results using Au nanoparticles show increased energy transfer rates up to 10⁴ and lower distance dependence.

Facile Fabrication of Highly Fluorescent N-Doped Carbon Quantum Dots Using an Ultrasonic-Assisted Hydrothermal Method: Optical Properties and Cell Imaging

Fluorescent N-doped carbon nanodots (CNDs) are a type of environmentally friendly nanomaterial that is promising for application in cell imaging and optoelectronics. In this paper, a natural amino acid (l-glutamic acid) was used as a precursor, and two different morphological and structured N-doped carbon quantum dots (CQDs) were synthesized via a one-step ultrasonic-assisted hydrothermal method at 230 and 250 °C. Various microscopy and spectroscopy techniques were employed to characterize the morphology, structure, optical properties, and stability of the CQDs. The results showed that N-CQDs-1 are new CNDs composed of amorphous carbon with a large amount of pyroglutamic acid, and N-CQDs-2 are composed of pure amorphous carbon. The CQDs exhibit excellent optical properties, such as 40.5% quantum yield, strong photobleaching resistance, and superior photostability. Combining the fluorescence lifetimes and radiative and non-radiative decay constants, the photoluminescence mechanism of the CQDs was qualitatively explained. The two CQDs were used for BV2 cell imaging and showed good results, implying the ultrasonic-assisted hydrothermal approach as a facile method to obtain structure- and morphology-controllable N-doped CQDs with prospect for application in cell imaging.

Density Functional Theory Analysis of Structural, Electronic, and Optical Properties of Mixed-Halide Orthorhombic Inorganic Perovskites

Inorganic metal-halide perovskites hold a lot of promise for solar cells, light-emitting diodes, and lasers. A thorough investigation of their optoelectronic properties is ongoing. In this study, the accurate modified Becke Johnson generalized gradient approximation (mBJ-GGA) method without/with spin orbital coupling (SOC) implemented in the WIEN2k code was used to investigate the effect of mixed I/Br and Br/Cl on the electronic and optical properties of orthorhombic CsPb(I1-x Br x )3 and CsPb(Br1-x Cl x )3 perovskites, while the Perdew-Burke-Ernzerhof generalized gradient approximation (PBE-GGA) method was used to investigate their structural properties. The calculated band gap (E g) using the mBJ-GGA method was in good agreement with the experimental values reported, and it increased clearly from 1.983 eV for CsPbI3 to 2.420 and 3.325 eV for CsPbBr3 and CsPbCl3, respectively. The corrected mBJ + SOC E g value is 1.850 eV for CsPbI3, which increased to 2.480 and 3.130 eV for CsPbBr3 and CsPbCl3, respectively. The calculated photoabsorption coefficients show a blue shift in absorption, indicating that these perovskites are suitable for optical and optoelectronic devices.

Design Principles of Large Cation Incorporation in Halide Perovskites

Perovskites have stood out as excellent photoactive materials with high efficiencies and stabilities, achieved via cation mixing techniques. Overcoming challenges to the stabilization of Perovskite solar cells calls for the development of design principles of large cation incorporation in halide perovskite to accelerate the discovery of optimal stable compositions. Large fluorinated organic cations incorporation is an attractive method for enhancing the intrinsic stability of halide perovskites due to their high dipole moment and moisture-resistant nature. However, a fluorinated cation has a larger ionic size than its non-fluorinated counterpart, falling within the upper boundary of the mixed-cation incorporation. Here, we report on the intrinsic stability of mixed Methylammonium (MA) lead halides at different concentrations of large cation incorporation, namely, ehtylammonium (EA; [CH₃CH₂NH₃]⁺) and 2-fluoroethylammonium (FEA; [CH₂FCH₂NH₃]⁺). Density functional theory (DFT) calculations of the enthalpy of the mixing and analysis of the perovskite structural features enable us to narrow down the compositional search domain for EA and FEA cations around concentrations that preserve the perovskite structure while pointing towards the maximal stability. This work paves the way to developing design principles of a large cation mixture guided by data analysis of DFT data. Finally, we present the automated search of the minimum enthalpy of mixing by implementing Bayesian optimization over the compositional search domain. We introduce and validate an automated workflow designed to accelerate the compositional search, enabling researchers to cut down the computational expense and bias to search for optimal compositions.

Electronic structure transition of cubic CsSnCl3 under pressure: effect of rPBE and PBEsol functionals and GW method

The antiperovskites based on metal halides have emerged as potential materials for advanced photovoltaic and electronic device applications. But the wide bandgap of non-toxic CsSnCl₃ reduces its photovoltaic efficiency. Here, we report the change of electronic structure of CsSnCl₃ at different pressure by using GGA-rPBE and GGA-PBEsol functionals and the GW method. We have shown that the prediction of electronic structure transition (semiconducting to metallic state) strongly depends on the exchange-correlation and the GW method gives the most reasonable values of the bandgap under pressure. The pressure increases the electronic density of states close to the Fermi level by pushing the valence electrons upward and thus, reduces the bandgap linearly. Afterward, we have also investigated the influence of pressure on absorption coefficient, and mechanical properties meticulously. Although the pressure shifts the absorption peak to lower photon energies, the absorption coefficient is slightly improved.

Crystal-Size-Induced Band Gap Tuning in Perovskite Films

A comprehensive picture explaining the effect of the crystal size in metal halide perovskite films on their opto‐electronic characteristics is currently lacking. We report that perovskite nanocrystallites exhibit a wider band gap due to concurrent quantum confinement and size dependent structural effects, with the latter being remarkably distinct and attributed to the perturbation from the surface of the nanocrystallites affecting the structure of their core. This phenomenon might assist in the photo‐induced charge separation within the perovskite in devices employing mesoporous layers as they restrict the size of nanocrystallites present in them. We demonstrate that the crystal size effect is widely applicable as it is ubiquitous in different compositions and deposition methods employed in the fabrication of state‐of‐the‐art perovskite solar cells. This effect is a convenient and effective way to tune the band gap of perovskites.

Franck-Condon Tuning of Optical Cycling Centers by Organic Functionalization

Laser induced electronic excitations that spontaneously emit photons and decay directly to the initial ground state ("optical cycling transitions") are used in quantum information and precision measurement for state initialization and readout. To extend this primarily atomic technique to large, organic compounds, we theoretically investigate optical cycling of alkaline earth phenoxides and their functionalized derivatives. We find that optical cycle leakage due to wave function mismatch is low in these species, and can be further suppressed by using chemical substitution to boost the electron-withdrawing strength of the aromatic molecular ligand through resonance and induction effects. This provides a straightforward way to use chemical functional groups to construct optical cycling moieties for laser cooling, state preparation, and quantum measurement.

Dynamical properties of organo lead-halide perovskites and their interfaces to titania: insights from Density Functional Theory

The vibrational density of states (VDOS), electronic structure and optical properties of bulk organo lead-halide perovskites, CH3NH3PbX3 (where X = Cl, I and Br), very promising and exciting candidate materials for solar-energy applications, have been studied by means of (hybrid) Density Functional Theory (DFT), with and without spin-orbit coupling, and equilibrium Born-Oppenheimer molecular dynamics (BOMD) in the constant-volume, isothermal (NVT) ensemble at 298 K. Particular emphasis has been directed towards the detailed characterisation of optimal hybrid-DFT strategies to reproduce faithfully the band gap, band structure and optical properties vis-à-vis both experiment and more computationally demanding GW calculations (i.e., those involving the single-particle Green's function, G, and the screened Coulomb interaction, W). The VDOS was found to feature intimate coupling between the lead and halide atoms, and was dominated by acoustic phonon modes - particularly so for chlorine, suggesting this as the more effective candidate material of the considered halides. Bulk optical properties were also determined. In view of promising 'hybrid' architectures of perovskites adsorbed on titania substrates, further simulations of lead iodide in contact with titania have been performed to assess thermal stability, as well as dynamical and structural properties of these systems. It was found that lattice strain led to some atomic layers in perovskite further from the interface adopting less crystal-like structure and less pronounced phonon spectra.