Rodlike AgI/Ag2Mo2O7 Heterojunctions with Enhanced Visible-Light-Driven Photocatalytic Activity

Phytosynthesis and characterization of tin-oxide nanoparticles (SnO2-NPs) from Croton macrostachyus leaf extract and its application under visible light photocatalytic activities

Nanotechnology is rapidly becoming more and more important in today's technological world as the need for industry increases with human well-being. In this study, we synthesized SnO2 nanoparticles (NPs) using an environmentally friendly method or green method from Croton macrostachyus leaf extract, leading to the transformation of UV absorbance to visible absorbance by reducing the band gap energy. The products underwent UV, FTIR, XRD, SEM, EDX, XPS, BET, and DLS for characterization. Characterization via UV-Vis spectroscopy confirmed the shift in absorbance towards the visible spectrum, indicating the potential for enhanced photocatalytic activity under visible light irradiation. The energy band gap for as-synthesized nanoparticles was 3.03 eV, 2.71 eV, 2.61 eV, and 2.41 eV for the 1:1, 1:2, 1:3, and 1:4 sample ratios, respectively. The average crystal size of 32.18 nm and very fine flakes with tiny agglomerate structures of nanoparticles was obtained. The photocatalytic activity of the green-synthesized SnO2 nanoparticles was explored under visible light irradiation for the degradation of rhodamine B (RhB) and methylene blue (MB), which were widespread fabric pollutants. It was finally confirmed that the prepared NPs were actively used for photocatalytic degradation. Our results suggest the promising application of these green-synthesized SnO2 NPs as efficient photocatalysts for environmental remediation with low energy consumption compared to other light-driven processes. The radical scavenging experiment proved that hydroxyl radicals (_OH) are the predominant species in the reaction kinetics of both pollutant dyes under visible light degradation.

Photocatalytic degradation of 2,4-dichlorophenol using nanomaterials silver halide catalysts

In this study, the photocatalytic activity of nanomaterials Ag/AgX (X = Cl, Br, I) is reported. Highly efficient silver halide (Ag/AgX where X = Cl, Br, I) photocatalysts were synthesized through a hydrothermal method. The samples were characterized using a range of techniques such as X-ray diffraction (XRD), scanning electron microscopy (SEM), and Brunauer-Emmett-Teller (BET) to check their structural, morphology, textural and optical properties. In addition, the photocatalytic activity of photocatalysts was evaluated through the degradation of 2,4-dichlorophenol (2,4-DCP) under UV and visible light irradiation. XRD analysis confirmed the presence of a single-phase structure (pure phase) in the synthesized photocatalysts. SEM micrographs showed agglomeration with a non-uniform distribution of particles, which is a characteristic of surfactant-free precipitation reactions in aqueous media. The Ag/AgBr photocatalyst exhibited the best degradation efficiency, resulting in 83.37% and 89.39% photodegradation after 5 h of UV and visible light irradiation, respectively. The effect of catalyst loading, initial solution pH, and 2,4-DCP concentration was investigated for the best-performing Ag/AgBr photocatalyst. The degradation kinetics were best described by the pseudo-first-order Langmuir-Hinshelwood model. The photocatalytic capacity of Ag/AgBr decreased by 50% after five reuse cycles. SEM images revealed heightened levels of photodegradation on the catalyst surface. The study proved the feasibility of using simple synthesis methods to produce visible light active photocatalysts capable of degrading refractory phenolic pollutants in aqueous systems.

Potato-on-rod like of Z-scheme plasmon Ag2CrO4-Ag2Mo2O7 heterojunction nanophotocatalyst with high stability and accelerated photo-degradation evolution of organic contaminants

The shocking increase of resistant dye pollutants in the environment and their harmful effects has become a potential threat to the ecosystem. In the current work, the novel and highly efficient potato-on-rod-like Z-scheme plasmon Ag2CrO4-Ag2Mo2O7 heterojunction nano-photocatalyst was synthesized by precipitation method to photodegrade different organic dyes under artificial sunlight. The required analysises were carried out to characterize nanophotocatalysts. FESEM and TEM results showed the placement way of potato-like Ag2CrO4 between/on rod-like Ag2Mo2O7 which was leading to suitable structure and surface morphology. Besides, the morphology observations released the meso-/macroporous potato-on-rod like architecture self-assembled by nanoparticles. DRS analysis also confirmed two band gap energies of 2.55 and 1.72 eV in Ag2CrO4-Ag2Mo2O7 (3:1) resulting from forming a heterojunction structure and the plasmon Ag. Ag2CrO4-Ag2Mo2O7 (3:1) nanophotocatalyst exhibited the most remarkable activity in the photodegradation of 10 mg/L 2-naphthol orange (97.8%), 10 mg/L rhodamine B (99.7%), 10 mg/L crystal violet (98.9%), and 10 mg/L methyl orange (56.1%) with a catalyst dosage of 0.1 gr for about 90 min. The appropriate energy band gap, the formation of the heterostructure, the presence of meso (0.0038 cm3/g) and macro (0.0044 cm3/g) holes, and pore diameter at about 17.2 nm based on BET-BJH analysis that facilitated the penetration of pollutant molecules, increased pollutant adsorption and demonstrated stunning capability of efficient light harvesting, the reason was electron-hole pairs recombination rate reduction. Moreover, the fabricated samples showed tremendous catalyst constancy and reusability even after the fourth run. Results have shown the remarkable photocatalytic activity under visible light and provide an environment-friendly and green strategy to overcome the challenges of organic pollutants present in aqueous solutions.

In-situ synthesis of novel dual S-scheme AgI/Ag6Mo7O24/g-C3N4 heterojunctions with tandem structure for photocatalytic degradation of organic pollutants

The controllable design of multivariate heterojunction with sequential structures is of significant relevance for breaking the performance limit of binary composite photocatalysts. In this work, the novel dual S-scheme ternary-component AgI/Ag₆Mo₇O₂₄/exfoliated g-C₃N₄ (ECN) composite was prepared by a two-step in-situ synthetic strategy. The energy band bending at the heterointerface and the formation of dual built-in electric field could be observed due to distinct work functions of different components in the ternary composite. Benefiting from the sequential heterojunction structure, the AgI/Ag₆Mo₇O₂₄/ECN composite achieved 98.7% removal efficiency of 2-nitrophenol (2-NP) within 70 min under visible light irradiation, and AgI/Ag₆Mo₇O₂₄/ECN also showed higher degradation efficiency for a variety of organic pollutants such as methylene blue (MB), rhodamine B (RhB), methyl orange (MO), 4-nitrophenol (4-NP), 2-sec-butyl-4,6-dinitrophenol (DNBP) and tetracycline (TC). Notably, •OH and •O₂^- played dominant roles in the AgI/Ag₆Mo₇O₂₄/ECN set up, which was consistent with the dual S-scheme charge transfer mechanism. In-depth insights for the photodegradation of 2-NP were presented based on a combined DFT study and GC-MS analysis. Additionally, the photoreduction of Ag⁺ in AgI/Ag₆Mo₇O₂₄/ECN was also evaded by the fast transfer of photogenerated electrons through the dual S-scheme pathway, achieving the effect of killing two birds with one stone.

Highly efficient visible light-induced photocatalytic oxidation of arsenite with nanosized WO3 particles in the presence of Cu2+ and CuO

Although WO₃ appears to be one of the extensively studied photocatalysts, the low response of pure WO₃ in aqueous solution under visible light limits its application remarkably. In this work, the enhancement of the efficiency of WO₃ for the visible light-driven photocatalytic oxidation of arsenite was explored using Cu²⁺ ion and CuO as a co-catalyst. While the addition of Cu²⁺ was found effective for the suppression of dissolution of WO₃, the efficiency of CuO appeared to be slightly lower. Significant improvement of the efficiency for the photocatalytic oxidation of As(III) with WO₃ was noted when Cu²⁺ ions and CuO were added. The optimized conditions were WO₃ in the presence of 10 mg L^-1 Cu²⁺ ion and 1 wt% CuO coupled with WO₃, respectively. The As(III) concentration of 10 mg L^-1 could be lowered to less than 0.1 mg L^-1 by the photocatalytic treatment. Acidic pH favours the oxidation of arsenite in the presence of Cu²⁺ whereas basic pH is suitable with CuO. Characterization techniques such as TEM, XPS, XRD and UV-DRS were used to characterize photocatalysts. The reactive species scavenger tests revealed that the photo-induced holes (h⁺) play a key role in the photocatalytic oxidation process while the effect of •OH is negligible. It was found that As(III) oxidation rate was remarkably suppressed in the nitrogen atmosphere. A mechanism for enhanced photocatalytic oxidation has been proposed based on the results of the reactive species scavenger tests. This research may contribute to the large-scale As(III) oxidation treatment in the groundwater.

Promoting the photocatalytic activity of Bi4Ti3O12 microspheres by incorporating iron

Small amounts of Fe(NO₃)₃ were added to the synthesis mixture prior to the hydrothermal synthesis of Bi₄Ti₃O₁₂ microspheres. The physicochemical properties of the resulting materials were changed accordingly. The photocatalytic activities of several samples were studied through the photocatalytic degradation of organic pollutants. The samples with a theoretical Fe atomic percentage of 5.9% showed the highest photocatalytic activity among these samples. The main active species in photocatalytic degradation was demonstrated by radical capturing experiments as h⁺. The introduction of a suitable amount of Fe to the photocatalyst can facilitate the separation of electron–hole pairs generated upon light irradiation, inhibit their recombination efficiently, and prominently expand the light absorption region, thus leading to higher photocatalytic activity.

Small amounts of Fe(NO₃)₃ were added to the synthesis mixture prior to the hydrothermal synthesis of Bi₄Ti₃O₁₂ microspheres.

Unvealing the role of β-Ag2MoO4 microcrystals to the improvement of antibacterial activity

Crystal morphology with different surfaces is important for improving the antibacterial activity of materials. In this experimental and theoretical study, the antibacterial activity of β-Ag₂MoO₄ microcrystals against the Gram-positive bacteria, namely, methicillin-resistant Staphylococcus aureus (MRSA), and the Gram-negative bacteria, namely, Escherichia coli (E. coli), was investigated. In this study, β-Ag₂MoO₄ crystals with different morphologies were synthetized by a simple co-precipitation method using three different solvents. The antimicrobial efficacy of the obtained microcrystals against both bacteria increased according to the solvent used in the following order: water < ammonia < ethanol. Supported by experimental evidence, a correlation between morphology, surface energy, and antibacterial performance was established. By using the theoretical Wulff construction, which was obtained by means of density functional calculations, the morphologies with large exposition of the (001) surface exhibited superior antibacterial activity. This study provides a low cost route for synthesizing β-Ag₂MoO₄ crystals and a guideline for enhancing the biological effect of biocides on pathogenic bacteria by the morphological modulation.