Dual-Function Fluorescent Probe for Detection of Hydrogen Sulfide and Water Content in Dimethyl Sulfoxide

Simple turn-on fluorescent probe for ultrafast and highly selective detection of hydrogen sulfide in aqueous solutions

5H-Benzimidazo[1,2-c]quinazoline-6-thione (BI-QT), was synthesized as a benzimidazole-based probe to detect H2S. BI-QT exhibits a fluorescent "turn-on" response in DMSO/H2O (9:1, HEPES 10 mM, pH 7.4) upon the addition of H2S. The BI-QT probe can determine micromolar (0-600 µM) H2S concentrations in aqueous systems, with a detection limit of 1.12 µM. Interestingly, BI-QT exhibited an ultrafast response to H2S, with maximum intensity achieved almost instantly when exposed to H2S. BI-QT is largely unaffected by pH and responds reliably over the wide 4-11 pH range, which highlights its applicability to various physiological scenarios. UV-vis, fluorescence, and 1H NMR spectroscopic analyses investigated the sensing mechanism. The practicality of the probe was demonstrated using water samples and living cells.

Activity-Based Fluorescent Probes for Hydrogen Sulfide and Related Reactive Sulfur Species

Hydrogen sulfide (H2S) is not only a well-established toxic gas but also an important small molecule bioregulator in all kingdoms of life. In contemporary biology, H2S is often classified as a "gasotransmitter," meaning that it is an endogenously produced membrane permeable gas that carries out essential cellular processes. Fluorescent probes for H2S and related reactive sulfur species (RSS) detection provide an important cornerstone for investigating the multifaceted roles of these important small molecules in complex biological systems. A now common approach to develop such tools is to develop "activity-based probes" that couple a specific H2S-mediated chemical reaction to a fluorescent output. This Review covers the different types of such probes and also highlights the chemical mechanisms by which each probe type is activated by specific RSS. Common examples include reduction of oxidized nitrogen motifs, disulfide exchange, electrophilic reactions, metal precipitation, and metal coordination. In addition, we also outline complementary activity-based probes for imaging reductant-labile and sulfane sulfur species, including persulfides and polysulfides. For probes highlighted in this Review, we focus on small molecule systems with demonstrated compatibility in cellular systems or related applications. Building from breadth of reported activity-based strategies and application, we also highlight key unmet challenges and future opportunities for advancing activity-based probes for H2S and related RSS.

A highly selective colorimetric and fluorescent probe Eu(tdl)2abp for H2S sensing: Application in live cell imaging and natural water

Using 4-([2,2': 6', 2'- terpyridin] -4'-yl) -N, N-dimethylaniline (tdl) as auxiliary ligand and 6-azido-2,2'-bipyridine (abp) as recognition ligand, a europium complex fluorescent probe Eu(4-([2,2': 6', 2'-terpyridin] -4' -yl) -N, N-dimethylaniline)₂-6-azido-2,2'-bipyridine Eu(tdl)₂abp for efficient and specific recognition of hydrogen sulfide (H₂S) was successfully synthesized and characterized by NMR and MS. Eu(tdl)₂abp represented "on-off" fluorescence signals for H₂S and its color changes could be identified with naked eyes. Eu(tdl)₂abp had short response time (2 min) to H₂S, high selectivity and good anti-interference, large stokes shift (207 nm). In various samples, when H₂S existed, the azide group was reduced to amine group, resulting in closed fluorescence signal, and the fluorescence intensity reached the degree of quenching without being affected by other interference. At the same time, there was a good linear relationship between relative fluorescence intensity and H₂S concentration with the detection limit (LOD) of 0.64 μM. The sensing mechanism of Eu(tdl)₂abp to detect H₂S was characterized by ¹H NMR and HR-MS. Eu(tdl)₂abp was used with success for the sensitive detection of H₂S in natural water and living cells.

A hemicyanidin-based NIR fluorescent probe for detection of H2S and imaging study in cells and mice

The selective detection of hydrogen sulfide in physiological and pathological processes has gained substantial attention in recent years. However, the real-time detection of hydrogen sulfide remains an elusive goal. In this work, a new type of hemicyanidin-based fluorescent "turn-on" probe NTR-HS (Ex = 680 nm, Em = 760 nm) was developed to detected H₂S in a very short time (3 min). The fluorescence quantum yield is 0.15 and accompanied with a noticeable color change from violet to blue that can be used to detect H₂S in the range 1.04 × 10^-7-4 × 10^-5 M with a limit of detection of 1.04 x 10^-7 M. The NTR-HS probe was also used for imaging of endogenous hydrogen sulfide and mitochondrial localization in HCT116 and HeLa cells. The detection mechanism was studied through fluorescence, UV-Vis, NMR, and mass analysis. Notably, the probe was successfully used to imaging H₂S in mice and locating hydrogen sulfide in the large intestine of mice.

Fluoranthene dyes for the detection of water content in methanol

Three novel fluoranthene dyes were obtained by cycloaddition reactions using acrylonitrile and dialkyl acetylenedicarboxylates. Their fluorescence properties in different polar-organic solvents were investigated systematically. Meanwhile, spectral changes induced by the addition of water in methanol were observed, indicating that these fluoranthenes dyes can be efficiently used to detect the water content in methanol as probes. Significantly, the practical test measurements for the water contents in methanol illustrated the measured results with the three fluorescent probes were basically consistent with the water content added artificially. This demonstrated the potential of these fluoranthene dyes as probes in measuring the water content in methanol.

An ethanethioate functionalized polythiophene as an optical probe for sensitive and fast detection of water content in organic solvents

A new polythiophene-based optical probe, namely PTS, was designed and prepared for detection and quantification of the water present in organic solvents. PTS exhibited sensitive and fast absorption and fluorescence signaling response to the changes of water content in tetrahydrofuran (THF), N,N-dimethylformamide (DMF) and N,N-dimethylacetamide (DMAc) due to the water-induced interpolymer-stacking aggregation as demonstrated by dynamic light scattering (DLS) analysis. The fluorescence intensity of PTS at 550 nm linearly reduced as a function of the water content in detection ranges of 0-30% (v/v) in THF, 0-10% in DMF and 0-10% in DMAc with the limit of detection (LOD) for water being 0.034% (v/v) in THF, 0.013% (v/v) in DMF, and 0.014% (v/v) in DMAc, respectively. Additionally, PTS-incorporated test paper was fabricated to successfully achieve naked-eye detection of water in DMF and DMAc. PTS was further applied to estimate the water content in real samples, convincingly demonstrating that our method was comparable with the standard Karl Fischer titration.

Ultrafast and nanomolar level detection of H2S in aqueous medium using a functionalized UiO-66 metal-organic framework based fluorescent chemosensor

Here, we present a 4-nitrophenyl functionalized Zr-UiO-66 MOF (MOF = metal-organic framework) and its applications towards the selective, sensitive and rapid detection of H₂S both in the aqueous medium and vapour phase. The MOF material was synthesized using the 2-(nitrophenoxy)terepththalic acid (H₂BDC-O-Ph-NO₂) linker and ZrCl₄ salt in the presence of a benzoic acid modulator. It was carefully characterized by thermogravimetric analysis (TGA), elemental analysis, powder X-ray diffraction (PXRD), FT-IR spectroscopy and surface area analysis. Noticeable thermal stability up to a temperature of 390 °C under air and the considerable chemical stability in different liquid media (H₂O, 1 M HCl, glacial acetic acid, NaOH in the pH = 8 to 10 range) confirmed the robustness of the MOF. The BET surface area (1040 m² g^-1) indicated the porous nature of the MOF. Remarkable selectivity of the MOF towards H₂S over other potential congeners of H₂S was observed in the aqueous medium. A very high fluorescence increment (∼77 fold) was observed after adding an aqueous Na₂S solution to the MOF suspension. The MOF probe displayed the lowest limit of detection (12.58 nM) among the existing MOF-based chemosensors of H₂S. Furthermore, it exhibited a very quick (60 s) response towards H₂S detection. The MOF compound could also detect H₂S in the vapour phase as well as in real water samples. Furthermore, we developed inexpensive MOF-coated paper strips for the naked-eye sensing of H₂S. A thorough investigation was carried out in order to elucidate the fluorescence turn-on sensing mechanism.

Comparison of Online Sensors for Liquid Phase Hydrogen Sulphide Monitoring in Sewer Systems

Hydrogen sulfide (H2S) related to wastewater in sewer systems is known for causing significant problems of corrosion and odor nuisance. Sewer systems severely affected by H2S typically rely on online H2S gas sensors for monitoring and control. However, these H2S gas sensors only provide information about the H2S emission potential at the point being monitored, which is sometimes inadequate to design control measures. In this study, a comparison of three market-ready online sensors capable of liquid-phase H2S detection in sewer systems was assessed and compared. Two of the three sensors are based on UV/Vis spectrophotometry, while the other adapted the design and principles of a Clark-type electrochemical microsensor. The H2S measurements of the sensors were statistically compared to a standard laboratory method at first. Following that, the performance of the online sensors was evaluated under realistic sewer conditions using the Berlin Water Company (BWB) research sewer pilot plant. Test applications representing scenarios of typical H2S concentrations found in sulfide-affected sewers and during control measures were simulated. The UV/Vis spectrometers showed that the performance of the sensors was highly dependent on the calibration type and measurements used for deriving the calibration function. The electrochemical sensor showed high sensitivity by responding to alternating anaerobic/anoxic conditions simulated during nitrate dosing. All sensors were prone to measurement disturbances due to high amounts of sanitary solids in wastewater at the study site and required continuous maintenance for reliable measurements. Finally, a summary of the key attributes and limitations of the sensors compared for liquid phase H2S detection is outlined.

A turn-on fluorescence probe for hydrogen sulfide in absolute aqueous solution

A turn-on hydrogen sulfide (H₂S) fluorescence probe, 4-{2-[4-(2,4-dinitrophenoxy)-phenyl]-vinyl}-1-methyl-pyridinium iodide (DPPVP), based on the thiolysis reaction of dinitrophenyl ethers (DNP) has been proposed. Pyridinium structure enhanced the water solubility of DPPVP, which could quickly respond to H₂S in absolute PBS solution and the fluorescence spectra of DPPVP at 520 nm were turned on by H₂S. The spectra results exhibited that DPPVP could sensitively detect H₂S with satisfied linear range (0-40 μM) and detection limit (13.4 nM). The high selectivity for H₂S against biothiols was attributed to the significant difference in the pKa and the molecular size. Moreover, DPPVP has been successfully used for detecting H₂S in vegetable.

Determination of Hydrogen Sulfide in Wines Based on Chemical-Derivatization-Triggered Aggregation-Induced Emission by High-Performance Liquid Chromatography with Fluorescence Detection

A chemical-derivatization-triggered aggregation-induced emission (AIE) method for the highly selective determination of hydrogen sulfide (H₂S) in wine matrices by high-performance liquid chromatography with fluorescence detection (HPLC-FLD) was developed. The detection strategy was developed based on the chemical derivatization of H₂S using a low-cost AIE-active fluorescence derivatization reagent, N-(3-iodine-2-oxopropyl)pyrene methamine (NIPM), to trigger specific AIE at 475 nm, which was red-shifted sharply to the maximum emission wavelength as compared with NIPM monomers of 375 nm, effectively quenching the interference from other thiol-containing compounds. With the aid of specific AIE and the effective separation of HPLC, the proposed method showed high selectivity and sensitivity toward H₂S. The limits of detection (LODs) at the sub-nM level of 0.25 nmol/L in the wine-beer sample and 0.30 nmol/L in red wine sample were obtained. To certify its applicability, this proposed strategy was successfully applied for the determination of H₂S in wine matrices.