Highly Efficient Mono-Functionalization of Knob-in-Hole Antibodies with Strain-Promoted Click Chemistry

Modular Semisynthetic Approach to Generate T Cell-Dependent Bispecific Constructs from Recombinant IgG1 Antibodies

Redirecting T cells to tumor cells by bispecific antibodies is an effective approach to treat cancer, and T cell-dependent bispecific antibodies (TDBAs) are an emerging class of potent immunotherapeutic agents. By simultaneously targeting antigens on tumor cells and T cells, T cells are activated to kill tumor cells. Herein, we report a platform to generate a novel class of 2:1 structure of T cell-dependent bispecific antibody with bivalency for HER2 receptors on tumor cells and monovalency for CD3 receptors on T cells. For this, we use a biogenic inverse electron-demand Diels-Alder (IEDDA) click reaction on genetically encoded tyrosine residues to install one TCO handle on therapeutically approved antibody trastuzumab. Subsequent TCO-tetrazine click with a tetrazine-functionalized CD3-binding Fab yields a 2:1 HER2 × CD3 TDBA that exhibits a tumor-killing capability at picomolar concentrations. Monovalency toward the CD3 receptor on T cells can lower the chances of cytokine release syndrome, which is a common side effect of such agents. Our semisynthetic approach can generate highly potent TDBA constructs in a few chemoenzymatic and synthetic steps.

Site-Selective Tyrosine Reaction for Antibody-Cell Conjugation and Targeted Immunotherapy

Targeted immunotherapies capitalize on the exceptional binding capabilities of antibodies to stimulate a host response that effectuates long-lived tumor destruction. One example is the conjugation of immunoglobulins (IgGs) to immune effector cells, which equips the cells with the ability to recognize and accurately kill malignant cells through a process called antibody-dependent cellular cytotoxicity (ADCC). In this study, a chemoenzymatic reaction is developed that specifically functionalizes a single tyrosine (Tyr, Y) residue, Y296, in the Fc domain of therapeutic IgGs. A one-pot reaction that combines the tyrosinase-catalyzed oxidation of tyrosine to o-quinone with a subsequent [3+2] photoaddition with vinyl ether is employed. This reaction installs fluorescent molecules or bioorthogonal groups at Y296 of IgGs or the C-terminal Y-tag of an engineered nanobody. The Tyr-specific reaction is utilized in constructing monofunctionalized antibody-drug conjugates (ADCs) and antibody/nanobody-conjugated effector cells, such as natural killer cells or macrophages. These results demonstrate the potential of site-selective antibody reactions for enhancing targeted cancer immunotherapy.

Development of a highly sensitive immunoassay based on pentameric nanobodies for carcinoembryonic antigen detection

BACKGROUND

Carcinoembryonic antigen-related cell adhesion molecule 5 (CEACAM-5) is a well-characterized biomarker for the clinical diagnosis of various cancers. Nanobodies, considered the smallest antibody fragments with intact antigen-binding capacity, have gained significant attention in disease diagnosis and therapy. Due to their peculiar properties, nanobodies have become promising alternative diagnostic reagents in immunoassay. However, nanobodies-based immunoassay is still hindered by small molecular size and low antigen capture efficacy. Therefore, there is a pressing need to develop novel nanobody-based immunoassays with superior performance.

RESULTS

A novel pentameric nanobodies-based immunoassay (PNIA) was developed with enhanced sensitivity and specificity for CEACAM-5 detection. The binding epitopes of three anti-CEACAM-5 nanobodies (Nb1, Nb2 and Nb3) were analyzed. To enhance the capture and detection efficacy of CEACAM-5 in the immunoassay, we engineered bispecific nanobodies (Nb1-Nb2-rFc) as the capture antibody, and developed the FITC-labeled pentameric nanobodies (Nb3-VT1B) as the detection antibody. The binding affinities of Nb1-Nb2-rFc (1.746 × 10-10) and Nb3-VT1B (1.279 × 10-11) were significantly higher than those of unmodified nanobodies (Nb1-rFc, 4.063 × 10-9; Nb2-rFc, 2.136 × 10-8; Nb3, 3.357 × 10-9). The PNIA showed a linear range of 0.625-160 ng mL-1 with a correlation coefficient R2 of 0.9985, and a limit of detection of 0.52 ng mL-1, which was 24-fold lower than the immunoassay using monomeric nanobody. The PNIA was validated with the spiked human serum. The average recoveries ranged from 91.8% to 102% and the coefficients of variation ranged from 0.026% to 0.082%.

SIGNIFICANCE AND NOVELTY

The advantages of nanobodies offer a promising alternative to conventional antibodies in disease diagnosis. The novel PNIA demonstrated superior sensitivity and high specificity for the detection of CEACAM-5 antigen. This bispecific or multivalent nanobody design will provide some new insights into the design of immunoassays for clinical diagnosis.

Preparation of Protein A Membrane Adsorbers Using Strain-Promoted, Copper-Free Dibenzocyclooctyne (DBCO)-Azide Click Chemistry

Protein A chromatography is the preferred unit operation for purifying Fc-based proteins. Convective chromatography technologies, like membrane adsorbers, can perform the purification rapidly and improve throughput dramatically. While the literature reports the preparation of Protein A membrane adsorbers utilizing traditional coupling chemistries that target lysine or thiol groups on the Protein A ligand, this study demonstrates a new approach utilizing copper-free dibenzocyclooctyne (DBCO)-azide click chemistry. The synthetic pathway consists of three main steps: bioconjugation of Protein A with a DBCO-polyethylene glycol (PEG) linker, preparation of an azide-functionalized membrane surface, and click reaction of DBCO-Protein A onto the membrane surface. Using polyclonal human immunoglobulins (hIgG) as the target molecule, Protein A membranes prepared by this synthetic pathway showed a flowrate-independent dynamic binding capacity of ~10 mg/mL membrane at 10% breakthrough. Fitting of static binding capacity measurements to the Langmuir adsorption isotherm showed a maximum binding (qmax) of 27.48 ± 1.31 mg/mL and an apparent equilibrium dissociation constant (Kd) of value of 1.72 × 10-1 ± 4.03 × 10-2 mg/mL. This work represents a new application for copper-less click chemistry in the membrane chromatography space and outlines a synthetic pathway that can be followed for immobilization of other ligands.

Disulfide re-bridging reagents for single-payload antibody-drug conjugates

Numerous antibody-drug conjugate (ADC) linker technologies exist for the synthesis of ADCs with drug-to-antibody ratios (DARs) being an even integer (typically 2, 4 or 8). However, ADCs with odd-integer DARs are significantly harder to synthesise. Here, we report the synthesis of ADCs loaded with a single warhead, using TetraDVP linkers which simultaneously re-bridge all four interchain disulfides of an IgG1 antibody.

Generation of DAR1 Antibody-Drug Conjugates for Ultrapotent Payloads Using Tailored GlycoConnect Technology

GlycoConnect technology can be readily adapted to provide different drug-to-antibody ratios (DARs) and is currently also evaluated in various clinical programs, including ADCT-601 (DAR2), MRG004a (DAR4), and XMT-1660 (DAR6). While antibody-drug conjugates (ADCs) typically feature a DAR2-8, it has become clear that ADCs with ultrapotent payloads (e.g., PBD dimers and calicheamicin) can only be administered to patients at low doses (<0.5 mg/kg), which may compromise effective biodistribution and may be insufficient to reach target receptor saturation in the tumor. Here, we show that GlycoConnect technology can be readily extended to DAR1 ADCs without the need of antibody re-engineering. We demonstrate that various ultrapotent, cytotoxic payloads are amenable to this methodology. In a follow-up experiment, HCC-1954 tumor spheroids were treated with either an AlexaFluor647-labeled DAR1 or DAR2 PBD-based ADC to study the effect on tumor penetration. Significant improvement of tumor spheroid penetration was observed for the DAR1 ADC compared to the DAR2 ADC at an equal payload dose, underlining the potential of a lower DAR for ADCs bearing ultrapotent payloads.

Chemical and Enzymatic Methods for Post-Translational Protein-Protein Conjugation

Fusion proteins play an essential role in the biosciences but suffer from several key limitations, including the requirement for N-to-C terminal ligation, incompatibility of constituent domains, incorrect folding, and loss of biological activity. This perspective focuses on chemical and enzymatic approaches for the post-translational generation of well-defined protein-protein conjugates, which overcome some of the limitations faced by traditional fusion techniques. Methods discussed range from chemical modification of nucleophilic canonical amino acid residues to incorporation of unnatural amino acid residues and a range of enzymatic methods, including sortase-mediated ligation. Through summarizing the progress in this rapidly growing field, the key successes and challenges associated with using chemical and enzymatic approaches are highlighted and areas requiring further development are discussed.

Site-selective and inducible acylation of thrombin using aptamer-catalyst conjugates

Two acyl-transfer catalysts were conjugated to thrombin-binding DNA aptamers to acylate thrombin. Modification occurred site-selectively on Lys (≫Ser) residues proximal to the respective aptamer-thrombin interface, was selective for thrombin in the presence of other proteins, and the activity of both DNA-catalysts could be controlled by an external trigger.

Optimized Production of Fc Fusion Proteins by Sortase Enzymatic Ligation

Fc fusions are a growing class of drugs comprising an antibody Fc domain covalently linked to a protein or peptide and can pose manufacturing challenges. In this study we evaluated three synthetic approaches to generate Fc fusions, using Fc-insulin as a model drug candidate. Engineered human IgG1 was digested with HRV3C to produce an Fc fragment with a C-terminal sortase tag (Fc-LPETGGH6). The synthesis of Fc-insulin2 from Fc-LPETGGH6 was evaluated with direct sortase-mediated ligation (SML) and two chemoenzymatic strategies. Direct SML was performed with triglycine-insulin, and chemoenzymatic strategies used to SML fuse either triglycine-azide or triglycine-DBCO prior to linking insulin with copper-catalyzed or strain-promoted azidealkyne cycloaddition. Reaction conditions were optimized by evaluating reagent concentrations, relative equivalents, temperature, and time. Direct SML provided the most effective reaction yields, converting 60-70% of Fc-LPETGGH6 to Fc-insulin2, whereas our optimized chemoenzymatic synthesis converted 30-40% of Fc-LPETGGH6 to Fc-insulin2. Here we show that SML is a practical and efficient method to synthesize Fc fusions and provide an optimized pathway for fusion drug synthesis.

Spatiotemporal Resolved Live Cell Membrane Tracking through Photo-click Reactions Enriched in Lipid Phase

A set of photo-switchable monopeptides derived from cis-β-dibenzodiazocine-l-alanine (cis-DBDAA) have been designed and synthesized, which are capable of photo-click reacting with diaryltetrazoles or diarylsydnones in a hydrophobic phospholipid bilayer environment. The DBDAA monopeptides include both a hydrophobic tail on C-terminal, providing high affinity toward lipid membrane, and a modularized functional moiety on N-terminal, enabling rapid optimization of the self-assembly strength to form multifunctional supramolecules. With the cis-DBDAA monopeptides photo-switched into trans-configuration, we were able to disrupt the supramolecular assembly through an efficient photo-click reaction across the lipid bilayer of liposomes. We reveal that the performance of the photo-click reactions between the monopeptides and photo-generated nitrile imine intermediates is significantly enhanced by enrichment of both reactants in the hydrophobic membrane lamel of liposomes. Enrichment of the DBDAA monopeptide in lipid phase serves as a convenient method to introduce bioorthogonal chemical handles on live cell membranes, which enables fluorescence labelling of single cell's membrane with high spatiotemporal resolution to facilitate the studies on cell membrane dynamics.

Oxidation-Induced "One-Pot" Click Chemistry

Click chemistry has been established rapidly as one of the most valuable methods for the chemical transformation of complex molecules. Due to the rapid rates, clean conversions to the products, and compatibility of the reagents and reaction conditions even in complex settings, it has found applications in many molecule-oriented disciplines. From the vast landscape of click reactions, approaches have emerged in the past decade centered around oxidative processes to generate in situ highly reactive synthons from dormant functionalities. These approaches have led to some of the fastest click reactions know to date. Here, we review the various methods that can be used for such oxidation-induced "one-pot" click chemistry for the transformation of small molecules, materials, and biomolecules. A comprehensive overview is provided of oxidation conditions that induce a click reaction, and oxidation conditions are orthogonal to other click reactions so that sequential "click-oxidation-click" derivatization of molecules can be performed in one pot. Our review of the relevant literature shows that this strategy is emerging as a powerful approach for the preparation of high-performance materials and the generation of complex biomolecules. As such, we expect that oxidation-induced "one-pot" click chemistry will widen in scope substantially in the forthcoming years.

Site-Specific and Trigger-Activated Modification of Proteins by Means of Catalytic Hemin/G-quadruplex DNAzyme Nanostructures

Catalytic nanostructures have the potency to mimic enzymatic features. In this paper, we show that the complex between hemin and G-quadruplex DNA efficiently catalyzes the modification of proteins with N-methyl luminol derivatives. Final conversions are reached within 15–30 min, and LC-MS analysis of tryptic digests of the proteins shows that the reaction proceeds with chemoselectivity for electron-rich aromatic residues (Tyr ≫ Trp), and the site-specificity of the modification depends on the sequence and secondary structure folding of the G-quadruplex nanostructure. Furthermore, the modification can be applied on proteins with different biomedical functions, and the nanostructure can be designed to contain a regulatory element in order to regulate protein modification by an external stimulus.