High-Throughput Screening and Surface Interrogation Studies of Au-Modified Hematite Photoanodes by Scanning Electrochemical Microscopy for Solar Water Splitting

Operando Scanning Electrochemical Probe Microscopy during Electrocatalysis

Scanning electrochemical probe microscopy (SEPM) techniques can disclose the local electrochemical reactivity of interfaces in single-entity and sub-entity studies. Operando SEPM measurements consist of using a SEPM tip to investigate the performance of electrocatalysts, while the reactivity of the interface is simultaneously modulated. This powerful combination can correlate electrochemical activity with changes in surface properties, e.g., topography and structure, as well as provide insight into reaction mechanisms. The focus of this review is to reveal the recent progress in local SEPM measurements of the catalytic activity of a surface toward the reduction and evolution of O₂ and H₂ and electrochemical conversion of CO₂. The capabilities of SEPMs are showcased, and the possibility of coupling other techniques to SEPMs is presented. Emphasis is given to scanning electrochemical microscopy (SECM), scanning ion conductance microscopy (SICM), electrochemical scanning tunneling microscopy (EC-STM), and scanning electrochemical cell microscopy (SECCM).

Transparent Ultramicroelectrodes for Studying Interfacial Charge-Transfer Kinetics of Photoelectrochemical Water Oxidation at TiO2 Nanorods with Scanning Electrochemical Microscopy

Scanning electrochemical microscopy (SECM) has been extensively applied to the electrochemical analysis of the surfaces and interfaces of a photoelectrochemical (PEC) system. A semiconductor photoelectrode with a well-defined geometry and active surface area comparable to SECM's tip is highly desired for accurately quantifying interfacial charge-transfer activities and photoelectrochemically generated redox species, where the broadening effects due to the mass transfer gradient and nonlocal electron transfer at a planar semiconductor surface can be minimized. Here, we present a newly developed platform as a SECM substrate for investigating semiconductor PEC activities, which is based on a transparent ultramicroelectrode (UME) fabricated by using two-step photolithographic patterning and ion milling methods. This transparent UME with a 25 μm recessed disk shape is fully characterized with SECM for quantifying the interfacial charge-transfer rates of IrCl₆^2-/IrCl₆^3- by comparing with theoretical results from finite element simulations in COMSOL Multiphysics. When coated with TiO₂ nanorods as a model semiconductor material, the transparent UME can be used to quantify the catalytic PEC water oxidation in a feedback mode of SECM by sampling tip and substrate current signals simultaneously. This transparent UME-SECM study provides insights into the potential-dependent PEC water oxidation reaction mechanism and the quantitative analysis of photocurrent contributions from water oxidation and the SECM tip-generated redox mediator. The transparent UME-SECM method can be potentially expanded to other SECM operation modes such as surface interrogation for understanding the dynamics of the electrode surfaces and interfaces of a PEC system.

Single-nanoparticle spectroelectrochemistry studies enabled by localized surface plasmon resonance

This review describes recent progress of spectroelectrochemistry (SEC) analysis of single metallic nanoparticles (NPs) which have strong surface plasmon resonance properties. Dark-field scattering (DFS), photoluminescence (PL), and electrogenerated chemiluminescence (ECL) are three commonly used optical methods to detect individual NPs and investigate their local redox activities in an electrochemical cell. These SEC methods are highly dependent on a strong light-scattering cross-section of plasmonic metals and their electrocatalytic characteristics. The surface chemistry and the catalyzed reaction mechanism of single NPs and their chemical transformations can be studied using these SEC methods. Recent progress in the experimental design and fundamental understanding of single-NP electrochemistry and catalyzed reactions using DFS, PL, and ECL is described along with selected examples from recent publications in this field. Perspectives on the challenges and possible solutions for these SEC methods and potential new directions are discussed.

Patterning of BiVO4 Surfaces and Monitoring of Localized Catalytic Activity Using Scanning Photoelectrochemical Microscopy

There is a lot of interest in understanding localized catalytic activities at the micro and nanoscale and designing robust catalysts for photoelectrochemical oxidation of water to address the pressing energy and environmental challenges. Here, we demonstrate that scanning photoelectrochemical microscopy (SPECM) can be effectively employed as a novel technique (i) to modify a photocatalyst surface with an electrocatalyst layer in a matrix fashion and (ii) to monitor its localized activity toward the photoelectrochemical (PEC) water oxidation reaction. The three-dimensional SPECM image clearly shows that the loading of the FeOOH electrocatalyst on the BiVO₄ semiconductor surface strongly affects its local PEC reaction activity. The optimal photoelectrodeposition time of FeOOH on the BiVO₄ photocatalyst was found to be ∼20 min when FeOOH was employed as the electrocatalyst. The electrocatalyst optimization process was conducted on a single photoanode electrode surface, making the optimization process efficient and reliable. The morphology of the formed photocatalyst/electrocatalyst hybrid, inclusive of its localized activity toward the water oxidation reaction, was simultaneously probed. A photoanode surface comprising CuWO₄/BiVO₄/FeOOH was further prepared in this study and investigated. It was found that the localized photoactivity truly reflects the activity of the local area, differs from region to region, and is contingent on the morphology of the surface. Moreover, the Pt UME is determined as an efficient probe to analyze the photoactivity of the PEC water splitting reaction. This work highlights the novel SPECM technique for enhancement and examination of the catalytic activity of the nanostructured materials.