Effect of Various Isolated Microbial Consortiums on the Biodegradation Process of Precipitated Asphaltenes from Crude Oil

Development of a highly tolerant bacterial consortium for asphaltene biodegradation in soils

Asphaltenes are the most polar and heavy fraction of petroleum, and their complex structure and toxicity make them resistant to biodegradation. The ability to tolerate high asphaltene concentrations is crucial to reducing the toxicity-related inhibition of microbial growth and improving their capacity for adaptation, survival, and biodegradation in soils highly contaminated with asphaltenes. This study developed a highly tolerant consortium for efficient asphaltene biodegradation in soils from 22 bacterial isolates obtained from heavy-crude oil-contaminated soils. Isolates corresponded to the Rhodococcus, Bacillus, Stutzerimonas, Cellulosimicrobium, Pseudomonas, and Paenibacillus genera, among others, and used pure asphaltenes and heavy crude oil as the only carbon sources. Surface plate assays were used to evaluate the tolerance of individual isolates to asphaltenes, and the results showed variations in the extension and inhibition rates with maximum tolerance levels at 60,000 mg asphaltenes l-1. Inhibition assays were used to select non-antagonistic bacterial isolates among those showing the highest tolerance levels to asphaltenes. A consortium made up of the five most tolerant and non-antagonistic bacterial isolates was able to degrade up to 83 wt.% out of 10,000 mg asphaltenes kg-1 in the soil after 52 days. Due to its biological compatibility, high asphaltene tolerance, and ability to utilise it as a source of energy, the degrading consortium developed in this work has shown a high potential for soil bioremediation and is a promising candidate for the treatment of aged soil areas contaminated with heavy and extra-heavy crude oil. This would be the first research to assess and consider extreme bacterial tolerance and microbial antagonism between individual degrading microbes, leading to the development of an improved consortium capable of efficiently degrading high amounts of asphaltenes in soil.

Applied potential assisted biodegradation of amoxicillin (AMX) using bacterial consortium isolated from a waste dump site

Antibiotics have revolutionized modern day living with their ability to effectively treat infectious diseases in humans and animals. However, the release of antibiotic compounds into the environment has led to toxic consequences. To reduce this environmental impact, it is important to employ an inexpensive and rational technology to reduce the amount of antibiotics released into the ecosystem. This study aims to explore the potential of using a bio-electrochemical system (BES) to remove Amoxicillin (AMX) from artificially contaminated soil using a microbial consortium and pure culture isolates. Under desired conditions, including an initial AMX concentration of 150 mg/L, 5 mg/L tryptone as the nitrogen source, pH of 7, temperature of 29 °C, an applied potential of 0.8 V, and an inoculum dose of 1% w/v, the BES showed a maximum degradation of 97.9% of AMX with the microbial consortium (HP03, HP09, and HP10). High performance liquid chromatography-mass spectrometry was used to analyse the intermediates formed during the degradation process, and the pathway elucidated revealed complete degradation of AMX. Phytotoxicity studies and degradation efficiency against multiple antibiotics confirmed the environmental significance of the BES with microbial consortium. Overall, this study highlights the potential of BES as a cost-effective and efficient method for reducing the release of antibiotics into the environment and provides valuable insights into the mechanisms and pathways of antibiotic degradation.

Biodegradation of asphaltene by lipopeptide-biosurfactant producing hydrocarbonoclastic, crude oil degrading Bacillus spp

Asphaltene is the most recalcitrant compound in crude oil. Bacteria were isolated from crude oil contaminated soil and their efficiency for hydrocarbon degradation was determined using GC-MS and isolates were screened for biosurfactant production using FT-IR. Two Bacillus spp. having hydrocarbonoclastic and lipo-peptide biosurfactant-producing abilities were experimented for their asphaltene removal potential through oil removal efficiency (ORE%) and asphaltene degradation efficiency (ADE%). B. thuringeinsis SSL1 and B. cereus SSL3 could degrade 76.4% and 67.4% of asphaltene (20gL^-1), in vitro, respectively, which is much higher than previous reports. B. thuringiensis SSL1 is recommended for effective breakdown of asphaltene, total petroleum hydrocarbon, and polyaromatic hydrocarbon degradation, aided by its biosurfactants, which is useful for crude oil cleanup. Biosurfactants are important for enhancing the availability of hydrophobic hydrocarbons to bacteria, which is beneficial for efficient crude oil remediation. These findings could lead to more effective strategies for complete clean-up of crude oil pollution.

Sustainable valorization of asphaltenes via flash joule heating

The refining process of petroleum crude oil generates asphaltenes, which poses complicated problems during the production of cleaner fuels. Following refining, asphaltenes are typically combusted for reuse as fuel or discarded into tailing ponds and landfills, leading to economic and environmental disruption. Here, we show that low-value asphaltenes can be converted into a high-value carbon allotrope, asphaltene-derived flash graphene (AFG), via the flash joule heating (FJH) process. After successful conversion, we develop nanocomposites by dispersing AFG into a polymer effectively, which have superior mechanical, thermal, and corrosion-resistant properties compared to the bare polymer. In addition, the life cycle and technoeconomic analysis show that the FJH process leads to reduced environmental impact compared to the traditional processing of asphaltene and lower production cost compared to other FJH precursors. Thus, our work suggests an alternative pathway to the existing asphaltene processing that directs toward a higher value stream while sequestering downstream emissions from the processing.

Microbial Consortia Are Needed to Degrade Soil Pollutants

Soil pollution is one of the most serious environmental problems globally due to the weak self-purification ability, long degradation time, and high cost of cleaning soil pollution. The pollutants in the soil can be transported into the human body through water or dust, causing adverse effects on human health. The latest research has shown that the clean-up of soil pollutants through microbial consortium is a very promising method. This review provides an in-depth discussion on the efficient removal, bio-adsorption, or carbonated precipitation of organic and inorganic pollutants by the microbial consortium, including PAHs, BPS, BPF, crude oil, pyrene, DBP, DOP, TPHP, PHs, butane, DON, TC, Mn, and Cd. In view of the good degradation ability of the consortium compared to single strains, six different synergistic mechanisms and corresponding microorganisms are summarized. The microbial consortium obtains such activities through enhancing synergistic degradation, reducing the accumulation of intermediate products, generating the crude enzyme, and self-regulating, etc. Furthermore, the degradation efficiency of pollutants can be greatly improved by adding chemical materials such as the surfactants Tween 20, Tween 80, and SDS. This review provides insightful information regarding the application of microbial consortia for soil pollutant removal.

Investigating the Performance of Carboxylate-Alumoxane Nanoparticles as a Novel Chemically Functionalized Inhibitor on Asphaltene Precipitation

In recent years, researchers have attempted to find some practical approaches for asphaltene adsorption and the prevention or postponement of asphaltene precipitation. Among different techniques, nanotechnology has attracted the researchers' attention to overcome the formation damage resulting from the deposition of asphaltenes. In this study, the application of two types of carboxylate-alumoxane nanoparticles (functionalized boehmite by methoxyacetic acid (BMA) and functionalized pseudo-boehmite by methoxyacetic acid (PBMA)) for asphaltene adsorption and precipitation was investigated. First, the synthesis of two functionalized nanoparticles was performed via the sol-gel method. For the assessment of the adsorption efficiency and adsorption capacity of these nanoparticles toward asphaltene adsorption, the batch adsorption experiments applying ultraviolet-visible (UV-Vis) spectroscopy were performed. The Langmuir and Freundlich isotherms were studied to describe the interaction between asphaltene molecules and carboxylate-alumoxane nanoparticles. For determining the "onset" point of asphaltene precipitation, the indirect method, which was based on the difference in the optical property of various solutions containing different concentrations of asphaltene, was utilized by applying UV-Vis spectroscopy. The isotherm models indicate that the adsorption of asphaltene on the surface of nanoparticles is better fitted to the Freundlich isotherm model compared with the Langmuir model. In the presence of PBMA (0.1 wt %), the onset point was delayed around 26, 20, and 17% in the asphaltene concentrations of 1000, 3000, and 5000 ppm, respectively, in comparison with their reference synthetic oils. On the other hand, these postponements for BMA nanoparticles (0.1 wt %) were 17%, 9%, and insignificant for the asphaltene concentrations of 1000, 3000, and 5000 ppm, respectively. The results reveal that two functionalized nanoparticles tend to adsorb asphaltene molecules and have a positive impact on the postponement of asphaltene precipitation due to molecular interactions between the surface of carboxylate-alumoxane nanoparticles and asphaltene molecules. However, PBMA nanoparticles exhibited better performance on the asphaltene adsorption and postponement of asphaltene precipitation, which is related to its smaller size, as well as higher surface area, compared with BMA nanoparticles.