ZrO2-ZnO Nanoparticles as Antibacterial Agents

Antibacterial Synergy: Assessing the Impact of Nano Zirconium Oxide Particles in Combination with Selected Antibiotics on Escherichia coli and Klebsiella pneumoniae Isolates from Urinary Tract Infections

Research for novel compounds that may block bacterial development has continued and prompted by antibiotic-resistant bacteria. The expenses of community for health care as a result of antibiotic resistance has indeed been remarkable during the last decades and demand immediate of medical attention. Consequently, this research presents the antibacterial effect of genuine metal oxide nanoparticles against Escherichia coli (E. coli) and Klebsiella pneumoniae that have been isolated from urinary tract infection patients. This is because metal oxide nanomaterials have already been utilised a compromise with some of its comprehensive implementations throughout the pharmaceutical and biological disciplines of nano-biotechnology. The biological activity of zirconium oxide (ZrO2) nanoparticles against bacteria is investigated using agar well diffusion approach. The antibacterial efficiency of nanoparticles on E. coli and Klebsiella pneumoniae using both qualitative and quantitative assessment approaches is appraised. Specifically, an aseptic technique is used to collect fifty urine samples into sterile tubes. To inoculate the patients' midstream urine on both blood agar and MacConkey agar plates, the direct streaking approach is employed. Scanning electron microscopy (SEM) and X-Ray diffraction (XRD) techniques are used to signify the physical features nanoparticle including shape and size. The identified cubic components of SEM and XRD techniques indicate the existence of ZrO2 nanoparticles and magnetic nanoparticles of particle size ranges between 5 to 50 nm. According to the data, ZrO2 nanoparticles have a bacteriostatic effect at 0.1 mg/ml with an absorption of 0.2 and a bactericidal effect at 2 mg/ml with an absorption of 0.007 on E. col isolates. Additionally, ZrO2 nanoparticles exhibit bacteriostatic (at 0.1 mg/ml with absorption of 0.3) and bactericidal (at 2 mg/ml with absorption of 0.001) effects on Klebsiella pneumoniae isolates. Among all the antibiotics utilised, gentamicin shows the lowest rate of resistance, suggesting that it is more effective against E. coli and Klebsiella pneumoniae when ZrO2 is presented.

A bioactive and anti-bacterial nano-sized zirconium phosphate/GO (nZrP/GO) composite: Potential use as a coating for dental implants?

OBJECTIVE

Dental implants fabricated from titanium have several limitations and therefore, alternative materials that fulfil the criteria of successful dental implant (bioactivity and anti-bacterial activity) need to be considered. Polyether ether ketone (PEEK) has been suggested to replace titanium implants. However, this material needs surface modification to meet the appropriate criteria. A nano-sized zirconium phosphate/GO (nZrP/GO) composite coating was prepared to improve PEEK's biological qualities.

METHODS

Polished and cleaned PEEK discs were coated with the composite of nZrP doped with 1.25 wt% GO by the soft-template method. To analyze the composite coating, X-ray, atomic force microscopy, and field emission scanning electron microscopy-energy dispersive spectroscopy were used. The adhesion of the coating to PEEK was measured by adhesive tape test. By measuring the optical contact angle, the coated and non-coated samples' differences in wettability were evaluated. Antimicrobial activity was evaluated against S. aureus and E. coli and cytotoxicity tested employing gingival fibroblasts and osteoblast-like cells.

RESULTS

The nZrP/GO composite coating was 23.45 µm thick, was irregular and attached strongly to the PEEK surface. Following coating, the water contact angle dropped to 34° and surface roughness to 13 nm. The coating reduced the count of bacteria two-fold and was non-cytotoxic to mammalian osteoblast-like cells and fibroblasts. A precipitation of nano-calcium-deficient apatite was observed on the surface of the nZrP/GO coating following a 28-day immersion in SBF.

SIGNIFICANCE

PEEK-coated with nZr/GO coating is a good candidate as dental implant.

Excellent adsorption of toxic Cd (II) ions from water with effective antibacterial activity by novel GO-ZnO-curcumin composite

A significant health risk arises from the bioaccumulation of harmful Cd (II) in drinking water. Here, we report the unique Cd (II) remediation from drinking water by using novel GO-ZnO-curcumin composite. The composites were tailored by varying the ratio of GO-ZnO and curcumin. The composites followed Langmuir adsorption isotherm and pseudo-second-order kinetics. ZnO nano-rods were more effective in Cd (II) than ZnO nano-disks. A maximum adsorption capacity of 4580 ± 40 mg/gm was achieved for 21G-B with a removal efficiency of 87.5% at neutral pH under optimized conditions. The removal process was governed by ion exchange and electrostatic attraction, followed by cation exchange capacity (CEC). The lattice parameter increase was detected after adsorption of Cd (II) ions. The regeneration and reusability of the composite was studied. Also, the effect of presence of dyes such as methylene blue on Cd (II) adsorption was noted. The latter had negligible effect on Cd (II) removal efficiency from water. The composite showed high antibacterial activity against B. subtilis and P. aeruginosa with minimum inhibitory concentration (MIC) of 10 ± 0.75 µg/ml and 5 ± 1 µg/ml respectively due to the presence of zinc. Composite stability was confirmed through leaching and thermal gravimetric analysis (TGA) analysis. The study establishes the nanocomposite as a potential material for remediation of hazardous Cd (II) ions from real water samples under neutral conditions.

Adaptive mechanism of the marine bacterium Pseudomonas sihuiensis-BFB-6S towards pCO2 variation: Insights into synthesis of extracellular polymeric substances and physiochemical modulation

Marine bacteria can adapt to various extreme environments by the production of extracellular polymeric substances (EPS). Throughout this investigation, impact of variable pCO2 levels on the metabolic activity and physiochemical modulation in EPS matrix of marine bacterium Pseudomonas sihuiensis - BFB-6S was evaluated using a fluorescence microscope, excitation-emission matrix (EEM), 2D-Fourier transform infrared correlation spectroscopy (2D-ATR-FTIR-COS), FT-NMR and TGA-DSC. From the results at higher pCO2 levels, there was a substantial reduction in EPS production by 58-62.8 % (DW). In addition to the biochemical composition of EPS, reduction in carbohydrates (8.7-47.6 %), protein (7.1-91.5 %), and lipids (16.9-68.6 %) content were observed at higher pCO2 levels. Functional discrepancies of fluorophores (tyrosine and tryptophan-like) in EPS, speckled differently in response to variable pCO2. The 2D-ATR-FTIR-COS analysis revealed functional amides (CN, CC, CO bending, -NH bending in amines) of EPS were preferentially altered, which led to the domination of polysaccharides relevant functional groups at higher pCO2. 1H NMR analysis of EPS confirmed the absence of chemical signals from H-C-COOH of proteins, α, β anomeric protons, and acetyl group relevant region at higher pCO2 levels. These findings can contribute new insights into the influence of pCO2 on the adaptation of marine microbes in future ocean acidification scenarios.

Antimicrobial Activity of Nanozirconium Oxide

The goal behind this work is to prepare, characterize, and study the antimicrobial behavior of zirconia (ZrO2) nanoparticles (NPs). Various techniques, such as X-ray diffraction (XRD), were used for studying the mineralogical structure and crystal size. The microstructure and chemical composition of the prepared particles were analyzed using a scanning electron microscope attached with an energy-dispersive X-ray analysis (EDAX) unit. The antagonistic ability against several Gram-negative and Gram-positive bacteria, including Salmonella paratyphi, Pseudomonas aeruginosa, Alcaligenes aquatilis, Escherichia coli, Streptococcus pneumoniae, and Staphylococcus aureus, was assessed using the well diffusion method. The results of XRD and scanning electron microscopy (SEM) analyses revealed that the prepared material exhibited the phase of zirconium nanoparticles with particle sizes ranging between 40 and 75 nm. The antimicrobial test results demonstrated that the inhibitory effect increased with the increase of concentration. The inhibitory effect was more pronounced against Gram-positive bacteria, as indicated by the larger size of the inhibitory zone. At a 9% dimethyl sulfoxide (DMSO) concentration, the inhibitory zone had a diameter of 3.50 mm for S. aureus compared to a diameter of 3.40 mm for S. pneumoniae. The use of zirconium oxide nanoparticles reduced the diameter of the inhibitory zone when tested against S. aureus at a 3% DMSO concentration (0.50 mm diameter) and against S. pneumoniae (0.40 mm diameter). Zirconia nanoparticles were also evaluated for their antifungal activity against several species, including Aspergillus niger, Aspergillus flavus, and Penicillium sp. The size of the inhibitory zone indicated the susceptibility of microorganisms to nanozirconium oxide, resulting in a stronger inhibition of Penicillium sp. at a 100% DMSO concentration (4.50 mm diameter) compared to A. niger and A. flavus (3.00 mm diameter). The results for Penicillium sp. at a 3% DMSO concentration showed a diameter of the inhibitory zone of 0.90 mm, while for A. niger and A. flavus, the diameter was 0.80 mm. Thus, our findings demonstrate that the zirconium oxide nanoparticles possess the capability to reduce the inhibition zone effectively for both bacterial and fungal activities.

Iodine-Doped 3D Print Ti Alloy for Antibacterial Therapy on Orthopedic Implants

This study presents a novel approach to mitigating bacterial infections and antibiotic resistance in medical implants through the integration of iodine-doping and 3D printing techniques. Iodine, with its potent antibacterial properties, and titanium alloy (Ti), a popular metal for implants due to its mechanical and biological properties, were combined via electrodeposition on 3D-printed titanium alloy (3D-Ti) implants. Scanning electron microscopy, energy dispersive spectroscopy, and X-ray photoelectron spectroscopy confirmed the successful creation of iodine-doped titanium implants with improved iodine content due to the rough surface of the 3D-printed material. In vitro studies revealed that these implants significantly inhibited bacterial adhesion and biofilm formation and showed favorable release kinetics for iodine ions. Biocompatibility tests demonstrated no cytotoxic effects and good hemocompatibility. The implants demonstrated enhanced antimicrobial efficacy against Escherichia coli (E. coli) and Staphylococcus aureus (S. aureus) bacteria strains. The findings imply that the integration of iodine-doping and 3D printing technologies is a promising strategy for treating postoperative infections associated with medical implants, consequently bettering the prognosis for patients. Future investigations are encouraged to delve into the long-standing impacts and prospective clinical utility of this groundbreaking methodology.

Green and sustainable synthesis of nanomaterials: Recent advancements and limitations

Nanomaterials have been widely used in diverse fields of research such as engineering, biomedical science, energy, and environment. At present, chemical and physical methods are the main methods for large-scale synthesis of nanomaterials, but these methods have adverse effects on the environment, and health issues, consume more energy, and are expensive. The green synthesis of nanoparticles is a promising and environmentally friendly approach to producing materials with unique properties. Natural reagents such as herbs, bacteria, fungi, and agricultural waste are used in the green synthesis of nanomaterials instead of hazardous chemicals and reduce the carbon footprint of the synthesis process. Green synthesis of nanomaterials is highly beneficial compared to traditional methods due to its low cost, negligible pollution level, and safety for the environment and human health. Nanoparticles possess enhanced thermal and electrical conductivity, catalytic activity, and biocompatibility, making them highly attractive for a range of applications, including catalysis, energy storage, optics, biological labeling, and cancer therapy. This review article provides a comprehensive overview of recent advancements in the green synthesis routes of different types of nanomaterials, including metal oxide-based, inert metal-based, carbon-based, and composite-based nanoparticles. Moreover, we discuss the various applications of nanoparticles, emphasizing their potential to revolutionize fields such as medicine, electronics energy, and the environment. The factors affecting the green synthesis of nanomaterials, and their limitations are also pointed out to decide the direction of this research field, Overall, this paper highlights the importance of green synthesis in promoting sustainable development in various industries.

Optimization of Antibacterial, Structures, and Thermal Properties of Alginate-ZrO2 Bionanocomposite by the Taguchi Method

Developing novel antibacterial chemicals is constantly necessary since bacterial resistance to antibiotics is an inevitable occurrence. This research aimed to find the ideal conditions for using antibacterial zirconia (ZrO2) NPs with polymer alginate nanocomposites. Using the Taguchi method, alginate biopolymer, zirconia NPs, and stirring time were utilized to construct nine nanocomposites. Analysis of Fourier transform infrared spectroscopy (FTIR), ultraviolet-visible (UV-vis), spectroscopy, X-ray diffraction (XRD), scanning electron microscopy (SEM), energy-dispersive X-ray spectroscopy (EDX), transmission electron microscopy (TEM), and thermogravimetric analysis (TGA) indicated the development of nanocomposites with appropriate structural properties. Antibacterial efficacy against Streptococcus mutans (S. mutans) biofilm was the highest when the nanocomposite was formed under the circumstances of experiment 6 (zirconia 8 mg/ml, alginate 70 mg/ml, and 40 min stirring time). Alginate/zirconia bionanocomposites generated using the in situ technique proved efficient against S. mutans. Nanoparticles have a high surface-to-volume ratio and surface energy, which can cause them to agglomerate and make their antimicrobial effectiveness problematic. Using zirconia nanoparticles in an alginate polymer matrix in the form of nanocomposite can increase the stability of nanoparticles. Due to the advantageous antibacterial qualities of this bionanocomposite, it can be utilized in various medical materials and dental appliances.

Comparative study of effective antibiofilm activity of beneficial microbes-mediated zirconia nanoparticles

In the present study, beneficial microbes-mediated zirconia nanoparticles were prepared using endophytic bacteria isolated from the seed of Terminalia chebula which were evaluated on inhibition of bacterial adherence and promotion to exhibit antibiofilm properties. The structure and distribution of the zirconia nanoparticles were examined through SEM (Scanning Electron Microscopy), EDS (Energy-Dispersive X-Ray spectroscopy), and XRD (X-ray diffraction analysis), which reveal the distribution of the particles. The morphology of biogenic zirconia nanoparticles was monoclinic and cubic. The formation of zirconia particle was confirmed using UV spectrum and the functional groups were intensified in FTIR (Fourier-transform infrared spectroscopy). The antibiofilm activity of the synthesized nanoparticles was tested in oral pathogens that cause biofilm by membrane integrity and leads to periodontal associated disease. The results showed that the particles had a significant effect on biofilm removal caused by oral pathogens. For determined concentration, the cytotoxicity of the endophytic bacterial facilitated zirconia nanoparticle (Zr NPs) was examined in HGF (Human gingival fibroblast cell line).

Zirconia-based nanomaterials: recent developments in synthesis and applications

In the last decade, the whole scientific community has witnessed great advances and progress in the various fields of nanoscience. Among the different nanomaterials, zirconia nanomaterials have found numerous applications as nanocatalysts, nanosensors, adsorbents, etc. Additionally, their exceptional biomedical applications in dentistry and drug delivery, and interesting biological properties, viz. anti-microbial, antioxidant, and anti-cancer activity, have further motivated the researchers to explore their physico-chemical properties using different synthetic pathways. With such an interest in zirconia-based nanomaterials, the present review focuses systematically on different synthesis approaches and their impact on the structure, size, shape, and morphology of these nanomaterials. Broadly, there are two approaches, viz., chemical synthesis which includes hydrothermal, solvothermal, sol-gel, microwave, solution combustion, and co-precipitation methods, and a greener approach which employs bacteria, fungus, and plant parts for the preparation of zirconia nanoparticles. In this review article, the aforementioned methods have been critically analyzed for obtaining specific phases and shapes. The review also incorporates a detailed survey of the applications of zirconia-based nanomaterials. Furthermore, the influence of specific phases, morphology, and the comparison with their counterpart composites for different applications have also been included. Finally, the concluding remarks, prospects and possible scope are given in the last section.

Evaluation of the Antibacterial Properties of Iron Oxide, Polyethylene Glycol, and Gentamicin Conjugated Nanoparticles against Some Multidrug-Resistant Bacteria

Antibacterial resistance is observed as a public health issue around the world. Every day, new resistance mechanisms appear and spread over the world. For that reason, it is imperative to improve the treatment schemes that have been developed to treat infections caused by wound infections, for instance, Staphylococcus epidermidis (S. epidermidis), Proteus mirabilis (P. mirabilis), and Acinetobacter baumannii (A. baumannii). In this case, we proposed a method that involves mixing the Gentamicin (Gen) with iron oxide nanoparticles (Fe3O4 NPs) and a polymer (polyethylene glycol (PEG)) with Fe3O4 NPs. X-ray diffraction (XRD), Fourier-transform infrared spectroscopy (FTIR), energy dispersive X-ray (EDX), scanning electron microscope (SEM), and transmission electron microscope (TEM) were used to characterize Fe3O4 NPs. Zeta potential and dynamic light scattering (DLS) were also assessed. The antibacterial activity of Fe3O4 NPs, Fe3O4 NPs+PEG, Fe3O4 NPs+Gen, and Fe3O4 NPs+PEG+Gen composites was investigated. The results showed a significant improvement in the antibacterial activity of nanoparticles against bacterial isolates, especially for the Fe3O4 NPs+PEG+Gen as the diameter of the inhibition zone reached 26.33 ± 0.57 mm for A. baumannii, 25.66 ± 0.57 mm for P. mirabilis, and 23.66 ± 0.57 mm for S. epidermidis. The Fe3O4 NPs, Fe3O4 NPs+PEG, Fe3O4+Gen, and Fe3O4+PEG+Gen also showed effectiveness against the biofilm produced by these isolated bacteria. The minimum inhibitory concentration (MIC) of Fe3O4 NPs for S. epidermidis was 25 µg mL−1 and for P. mirabilis and A. baumannii was 50 µg mL−1. The findings suggest that the prepared nanoparticles could be potential therapeutic options for treating wound infections caused by S. epidermidis, P. mirabilis, and A. baumannii.

A Study of Zn-Ca Nanocomposites and Their Antibacterial Properties

This study aimed to develop Ca²⁺ doped ZnO nanoparticles (NPs) and investigate their antibacterial properties against microorganisms of dental interest. Zn-Ca NPs were synthesized by the sol-gel method with different concentrations of Ca²⁺ (1, 3, and 5 wt. %) and subsequently characterized by scanning electron microscopy (SEM), X-ray diffraction (XRD), UV-vis spectroscopy and Fourier transform infrared spectroscopy (FT-IR). The Kirby–Bauer method was used to measure antibacterial effects. NPs showed the wurzite phase of ZnO and bandgap energies (Eg) from 2.99 to 3.04 eV. SEM analysis showed an average particle size of 80 to 160 nm. The treatments that presented the best antibacterial activity were Zn-Ca 3% and Zn-Ca 5%. ZnO NPs represent an alternative to generate and improve materials with antibacterial capacity for dental applications.

MoS2 based nanomaterials: Advanced antibacterial agents for future

Bacterial infections are yet another serious threat to human health. Misuse or overuse of conventional antibiotics has led to the arrival of various super resistant bacteria along with many serious side effects to human body. In this exigent circumstance, the use of nanomaterial based antibacterial agents is one of the most appropriate solutions to fight against bacteria thereby causing an inhibition to bacterial proliferation. Recent studies show that, due to the large surface area, high biocompatibility, strong near-infrared (NIR) absorption and low cytotoxicity, molybdenum disulphide (MoS₂), an extraordinary member in the transition metal dichalcogenides (TMDs) is extensively explored in the obliteration of many drug resistant bacteria, photothermal therapy and drug delivery. MoS₂ based nanomaterials can effectively prevent bacterial growth through many mechanisms. Through this review, we have tried to provide an inclusive knowledge on the recent progress of antibacterial studies in MoS₂ based nanomaterials including MoS₂ nanosheets, nanoflowers, quantum dot (QD), hybrid nanocomposites and polymer nanocomposites. Moreover, toxicity of MoS₂ based nanomaterials is described at the end of the review.

Bio-Synthesized Tin Oxide Nanoparticles: Structural, Optical, and Biological Studies

This research was planned to synthesize a biological potent nanomaterials via an eco-friendly process to combat the diseases causing bacteria and the free radicals generated inside the body. For this purpose, a green synthesis process was employed to prepare SnO2 nanoparticles by utilizing leaf extract of Populus ciliate, and they were characterized via different physico-chemical techniques. The crystallite size of SnO2 nanoparticles was found to be 58.5 nm. The calculated band gap energy of SnO2 nanoparticles was 3.36 eV. The SnO2 nanoparticles showed 38, 49, 57, and 72% antioxidant activity at concentrations of 100, 200, 300, and 400 L with 2,2′-azino-bis(3-ethylbenzothiazoline-6-sulfonicacid) (ABTS) assays. The antibacterial effects of prepared SnO2 nanoparticles were studied using the agar well diffusion method against Gram-positive bacteria (S. pyogene and S. aureus) and Gram-negative bacteria (K. pneumoniae and E. coli). Both the antioxidant activity and antibacterial activity were seen to increase with increasing the concentration of the nanoparticles.

Review on synthesis, properties and multifarious therapeutic applications of nanostructured zirconia in dentistry

Amongst dental ceramics, nano zirconia (ZrNp) has shown exceptional developments in the field of dentistry in recent years. Zirconia is an oxide that possess superior optical, mechanical, and biological properties. As a novel nanoparticle, it has been widely used in various fields of dentistry due to its improved mechanical properties, biocompatibility, and stable structure. Provision of metal free solutions is one of the prime requirements in dental materials. Many metal alloys used extensively possess unaesthetic colors and display chemical interactions in the oral cavity encouraging use of zirconia for dental use. Use of ZrNp based ceramics has increased due to its resistance to corrosion, superior color matching that enhances esthetics and improved strength compared to conventional biomaterials. This review discusses the recent scientific literature on the synthesis, properties and types, applications, and toxicity of ZrNp in the field of dentistry.

Preparation and characterization of Pullulan-based nanocomposite scaffold incorporating Ag-Silica Janus particles for bone tissue engineering

A nanocomposite bone scaffold was fabricated from pullulan, a natural extracellular polysaccharide. Pullulan (PULL) was blended with polyvinylpyrrolidone (PVP), and a nano-platform with ball-stick morphology, Ag-Silica Janus particles (Ag-Silica JPs), which were utilized to fabricate nanocomposite scaffold with enhanced mechanical and biological properties. The Ag-Silica JPs were synthesized via a one-step sol-gel method and used to obtain synergistic properties of silver and silica's antibacterial and bioactive effects, respectively. The synthesized Ag-Silica JPs were characterized by means of FE-SEM, DLS, and EDS. The PULL/PVP scaffolds containing Ag-Silica JPs, fabricated by the freeze-drying method, were evaluated by SEM, EDS, FTIR, XRD, ICP and biological analysis, including antibacterial activity, bioactivity, cell viability and cell culture tests. It was noted that increasing Ag-Silica JPs amounts to an optimum level (1% w/w) led to an improvement in compressive modulus and strength of nanocomposite scaffold, reaching 1.03 ± 0.48 MPa and 3.27 ± 0.18, respectively. Scaffolds incorporating Ag-Silica JPs also showed favorable antibacterial activity. The investigations through apatite forming ability of scaffolds in SBF indicated spherical apatite precipitates. Furthermore, the cell viability test proved the outstanding biocompatibility of nanocomposite scaffolds (more than 90%) confirmed by cell culture tests showing that increment of Ag-Silica JPs amounts led to better adhesion, proliferation, ALP activity and mineralization of MG-63 cells.

Synthesis and Characterization of Epoxy-Rich TMOs Deposited on Stainless Steel for Corrosion Applications

Epoxy-trimetallic oxide (epoxy-TMO) coatings of ZrO2:TiO2:ZnO at different compositions were synthesized and used to protect a stainless steel surface. The different TMO compositions were synthesized using the ball-milling method and later dispersed on the polymer matrix. The different characterizations performed on these coatings showed that the epoxy-TMO coating with a ratio of 50:40:10 (wt%) exhibited the highest corrosion resistance, in the order of ~1012 Ωcm2, due to the barrier effect of the distributed particles after 28 days in an aggressive environment (3.5 wt% NaCl solution). The influence of the metal oxides in forming a semiconductor layer produces a capacitor-like behavior, influencing corrosion control via a mass transfer mechanism barrier. The water uptake reveals the effect of each metal oxide in the formation of a physical barrier due to the dispersion mechanism, as well as how the particles function within the polymer matrix.

Enhanced Photocatalytic Activity of Ficus elastica Mediated Zinc Oxide-Zirconium Dioxide Nanocatalyst at Elevated Calcination Temperature: Physicochemical Study

The photocatalytic degradation of Rhodamine 6G dye was achieved using a Ficus elastica (F. elastic) leaf extract mediated zinc oxide-zirconium dioxide nanocatalyst (ZnO-ZrO2 NC) under stimulated solar light, resulting in a substantial increase in photocatalytic activity at the highest calcination temperature. The crystal phase and crystallite size were determined using an X-ray diffractometer (XRD), and the degree of crystallinity was observed to rise with increasing calcination temperature. Energy dispersive X-ray (EDX) was used to investigate the elemental composition and purity of ZnO-ZrO2 NC. Scanning electron microscopy (SEM) was used to investigate the surface morphology, and the morphological characteristics were altered when the calcination temperature was varied. For the ZnO-ZrO2 NC calcined at 100, 300, 600, and 900 °C, the average grain size determined from SEM images is 79.56 nm, 98.78 (2) nm, 54.86 (2) nm, and 67.43 (2) nm, respectively. Using diffuse reflectance spectroscopy (DRS) data, the optical band gap energy was calculated using a Tauc’s plot. The ZnO in ZnO-ZrO2 NC calcined at 100, 300, 600, and 900 °C had band gap energies of 3.31, 3.36, 3.38, and 3.29 eV. Similarly, ZrO2 in ZnO-ZrO2 NC calcined at 100, 300, 600, and 900 °C had band gap energies of 3.96, 3.99, 3.97, and 4.01 eV, respectively. Fourier transform infrared (FTIR) spectroscopy was used to identify the presence of various functional groups. The photocatalytic activity was also examined in relation to calcination temperature, pH, starting concentration, and catalyst dosage. Enhanced photocatalytic activity was observed at pH 11 and 15 ppm initial concentration with a catalyst dose of 25 mg. The photocatalytic activity of the sample calcined at 900 °C was the highest, with 98.94 percent of the dye mineralized in 330 min at a degradation rate of 0.01261/min.

Alginate/Gelatin Sponges Composited with ZnO Sponge Effective Extensibility and Compressibility as a Wound Dressing for the Care of Fracture Surgery

We designed and synthesized highly porous alginate and gelatin hydrogels with zinc oxide nanoparticles (AGZNPs) as dressings using sol–gel methods. The presence of functional groups and the surface characteristics of the as-synthesised dressings were analyzed via Fourier transforminfrared (FT-IR) spectroscopy, while their morphology was studied via scanning electron microscopy (SEM). Additionally, the mechanical, inflammatory, and antibacterial properties and biocompatibility of the AGZNPs were evaluated to determine the efficiency of these bandages for wound healing applications. The AGZNPs demonstrated enhanced inflammatory and antibacterial properties. The biocompatibility of the nanocomposites was investigated in noncancerous NIH3T3 human fibroblasts. Furthermore, in-vivo examinations showed that the composition of the synthesized AGZNPs enhanced wound healing and promoted rapid cell construction and growth. Therefore, the AGZNP strategy promotes the future application of these nanoformulation hydrogels for wound bandaging in fracture surgeries.

Do Iron Oxide Nanoparticles Have Significant Antibacterial Properties?

The use of metal oxide nanoparticles is one of the promising ways for overcoming antibiotic resistance in bacteria. Iron oxide nanoparticles (IONPs) have found wide applications in different fields of biomedicine. Several studies have suggested using the antimicrobial potential of IONPs. Iron is one of the key microelements and plays an important role in the function of living systems of different hierarchies. Iron abundance and its physiological functions bring into question the ability of iron compounds at the same concentrations, on the one hand, to inhibit the microbial growth and, on the other hand, to positively affect mammalian cells. At present, multiple studies have been published that show the antimicrobial effect of IONPs against Gram-negative and Gram-positive bacteria and fungi. Several studies have established that IONPs have a low toxicity to eukaryotic cells. It gives hope that IONPs can be considered potential antimicrobial agents of the new generation that combine antimicrobial action and high biocompatibility with the human body. This review is intended to inform readers about the available data on the antimicrobial properties of IONPs, a range of susceptible bacteria, mechanisms of the antibacterial action, dependence of the antibacterial action of IONPs on the method for synthesis, and the biocompatibility of IONPs with eukaryotic cells and tissues.

Crystallization, Mechanical, and Antimicrobial Properties of Diallyl Cyanuric Derivative-Grafted Polypropylene

A functional N-halamine precursor with double bonds, 1-3-diallyl-s-triazine-2,4,6-trione (DTT), was synthesized and grafted onto polypropylene using dicumyl peroxide (DCP) as an initiator via melt blending at 200 °C. The DTT content grafted onto the polypropylene (PP) backbone was depended on both DTT and DCP concentrations in feed. The crystallization temperature of PP increased from 116 °C (neat PP) to 123 °C (10% DTT) with the increasing DTT content. Meanwhile, the crystallization rate and relative crystallinity of PP were significantly increased after introduction of the N-halamine precursor. Moreover, the incorporation of DTT had partial compensation for the decreasing mechanical properties of polypropylene, which resulted from degradation. When the amount of added DTT reached up to 5%, the chlorinated DTT-modified PP sheets were able to kill 105-6 cfu/mL Escherichia coli (CMCC 44103) and Staphylococcus aureus (ATCC 6538) within 10 min. The DTT-modified PP with the regenerating antibacterial property may have great potential for application in packaging, filters, and hygienic products.

Evaluation of Antifungal Activity by Mixed Oxide Metallic Nanocomposite against Candida spp

High doses of antimicrobial agents are a huge threat due to the increasing number of pathogenic organisms that are becoming resistant to antimicrobial agents. This resistance has led to a search for alternatives. Therefore, this study presents the synthesis and characterization of ZrO2-Ag2O nanoparticles (NPs) by sol-gel. The NPs were analyzed by dynamic light scattering (DLS), UV-visible (UV-vis), Raman and scanning electron microscopy (SEM). The NPs were later evaluated for their antifungal effects against Candidaalbicans, Candida dubliniensis, Candida glabrata, and Candida tropicalis, using disc diffusion and microdilution methods, followed by the viability study. The DLS showed sizes for ZrO2 76 nm, Ag2O 50 nm, and ZrO2-Ag2O samples between 14 and 42 nm. UV-vis shows an absorption peak at 300 nm for ZrO2 and a broadband for Ag2O NPs. Raman spectra were consistent with factor group analysis predictions. SEM showed spherically shaped NPs. The antifungal activity result suggested that ZrO2-Ag2O NPs were effective against Candida spp. From the viability study, there was no significance difference in viability as a function of time and concentration on human mononuclear cells. This promising result can contribute toward the development of alternative therapies to treat fungal diseases in humans.

A Review on Enhancing the Antibacterial Activity of ZnO: Mechanisms and Microscopic Investigation

Metal oxide nanomaterials are one of the preferences as antibacterial active materials. Due to its distinctive electronic configuration and suitable properties, ZnO is one of the novel antibacterial active materials. Nowadays, researchers are making a serious effort to improve the antibacterial activities of ZnO by forming a composite with the same/different bandgap semiconductor materials and doping of ions. Applying capping agents such as polymers and plant extract that control the morphology and size of the nanomaterials and optimizing different conditions also enhance the antibacterial activity. Forming a nanocomposite and doping reduces the electron/hole recombination, increases the surface area to volume ratio, and also improves the stability towards dissolution and corrosion. The release of antimicrobial ions, electrostatic interaction, reactive oxygen species (ROS) generations are the crucial antibacterial activity mechanism. This review also presents a detailed discussion of the antibacterial activity improvement of ZnO by forming a composite, doping, and optimizing different conditions. The morphological analysis using scanning electron microscopy, field emission-scanning electron microscopy, field-emission transmission electron microscopy, fluorescence microscopy, and confocal microscopy can confirm the antibacterial activity and also supports for developing a satisfactory mechanism. Graphical abstract showing the metal oxides antibacterial mechanism and the fluorescence and scanning electron microscopic images.

Synthesis of Hydroxyapatite-Ag Composite as Antimicrobial Agent

Innovative and improved antimicrobial agents by nanotechnology are developed to control and mitigation of resistant microorganisms. Nanoparticles of metals or oxide metals be able to be toxic to bacteria, demonstrating biocidal behaviors at low concentrations. The integration of silver nanoparticles in ceramic matrices has enhanced the antimicrobial performance, resulting in the search for new composites with improved bactericidal properties. The aim of this study was to prepare and characterize hydroxyapatite-silver nanocomposite and evaluate its antimicrobial properties against various Gram-positive and negative bacteria related to drug-resistance infections. Hydroxyapatite nanopowders were produced by sol-gel and silver nanoparticles were synthesized by reduction of Ag⁺ions with the simple addition of gallic acid. Hydroxyapatite-silver composite (HAp-AgNPs) was prepared by adsorption of AgNPs at several concentrations. The results of UV-visible spectroscopy, dynamic light scattering, and transmission scanning electron microscopy revealed the existence of AgNPs with diameters around 6 nm. Scanning electron microscopy and energy dispersive X-ray spectroscopy corroborated the presence of silver disseminated over the surface of hydroxyapatite nanopowders. All HAp-AgNPs composites demonstrated excellent antibacterial effect even at lower silver concentration. HAp-AgNPs composites have a higher possibility for medical applications focused no the control of microorganisms with drug-resistance.

Bactericidal Activity Study of ZrO2-Ag2O Nanoparticles

In view of the continuous resistance to antibacterial agents by bacteria and the existing problems of silver nanoparticles as an antibacterial agent, this study reports on the synthesis of pure zirconium oxide, silver oxide, and ZrO2-Ag2O nanoparticles by sol-gel method. The nanoparticles were analyzed and tested for their antibacterial activity against gram-positive bacteria of Bacillus subtilis, Streptococcus mutans, Staphylococcus aureus, and gram-negative of Escherichia coli, Pseudomonas aeruginosa, and Klebsiella oxytoca. X-ray diffraction showed the monoclinic ZrO2, cubic Ag2O, and peaks corresponding to ZrO2 and Ag2O in their mixed samples. Scanning electron microscopy showed spherically shaped nanoparticles while dynamic light scattering analysis showed ZrO2 (76 nm), Ag2O (50 nm), and ZrO2-Ag2O samples between 14 and 42 nm. The Fourier Transformed Infrared spectroscopy spectra of ZrO2 gave bands at 480 cm-1 to 750 cm-1 (M-O stretching) with Ag2O at 580 cm-1, while ZrO2-Ag2O samples showed bands at 760 cm-1. The screening by agar diffusion assay revealed a pronounced increase in the antibacterial activity of ZrO2-Ag2O against all the tested bacteria when compared with the pure ZrO2 and Ag2O. The improved antibacterial activity of ZrO2-Ag2O largely results from the chemical stability conferred on it by the ZrO2 as observed from the zeta potential measurement.

OCCAM: prediction of small ORFs in bacterial genomes by means of a target-decoy database approach and machine learning techniques

Small open reading frames (ORFs) have been systematically disregarded by automatic genome annotation. The difficulty in finding patterns in tiny sequences is the main reason that makes small ORFs to be overlooked by computational procedures. However, advances in experimental methods show that small proteins can play vital roles in cellular activities. Hence, it is urgent to make progress in the development of computational approaches to speed up the identification of potential small ORFs. In this work, our focus is on bacterial genomes. We improve a previous approach to identify small ORFs in bacteria. Our method uses machine learning techniques and decoy subject sequences to filter out spurious ORF alignments. We show that an advanced multivariate analysis can be more effective in terms of sensitivity than applying the simplistic and widely used e-value cutoff. This is particularly important in the case of small ORFs for which alignments present higher e-values than usual. Experiments with control datasets show that the machine learning algorithms used in our method to curate significant alignments can achieve average sensitivity and specificity of 97.06% and 99.61%, respectively. Therefore, an important step is provided here toward the construction of more accurate computational tools for the identification of small ORFs in bacteria.