Practical Modification of Tannic Acid Polyether Demulsifier and Its Highly Efficient Demulsification for Water-in-Aging Crude Oil Emulsions

Nano-modification of carboxylated polyether for enhanced room temperature demulsification of oil-water emulsions: Synthesis, performance and mechanisms

Oil-water emulsions separation is frequently required considering the production and environmental issues. Herein, a nano-modification strategy has been proposed for carboxylated poly(propylene oxide)-poly(ethylene oxide) block polyether (mANP) using epoxy-functionalized magnetic nanoparticles (Fe₃O₄@SiO₂-GPTMS), achieving the construction of a highly efficient demulsifier (M-mANP). Bottle tests showed that M-mANP could separate over 98.5% of water from the asphaltene-stabilized water-in-oil (W/O) emulsion at mANP concentration of 150 ppm within 2 min at room temperature. The demulsification efficiency for crude oil-in-water emulsion was nearly 100%. According to interfacial tension and wettability tests, the nano-modification endows M-mANP with good amphiphilicity and high interfacial activity, which enables M-mANP to rapidly adsorb at the oil-water interface. Molecular dynamics simulation shows that abundant oxygen-containing groups (hydroxyl, ether bond, ester and carboxyl groups, Fe-O and Si-O bond) in M-mANP could strengthen the interaction with water, facilitating the replacement of asphaltene molecules at interfacial film. Observation of demulsification process by microscope reveals that the nano-size promotes M-mANP to bridge small dispersed droplets, enhancing the flocculation and coalescence of droplets. The nano-modified carboxylated polyether with outstanding demulsification ability shows a promising application for the treatment of different oil-water emulsions.

The Influence of Newly Synthesized Demulsifiers on the Interfacial Rheological Properties of a Naturally Occurring Water/Oil Emulsion

This research aimed to synthesize new polymeric nonionic demulsifiers (DA, DB, and DC) to break 50% of naturally occurring water/oil emulsions. The prepared demulsifiers were synthesized in only two stages utilizing simple techniques. ¹H and ¹³CNMR, MS, and FTIR spectroscopies were performed to validate the chemical composition of the synthesized demulsifiers. The relative solubility number (RSN) and partition coefficient (K _p) were determined for the three demulsifiers. The interfacial tension (IFT) and dehydration ratios of DA, DB, DC, and their triblock copolymers were investigated. Also, interfacial rheological properties for the three demulsifiers were measured. The findings demonstrate that DB possesses a higher RSN value than DA and DC owing to its hydrophilicity. DC exhibited the lowest IFT value compared to DA, DB, and their corresponding triblock copolymers. DB and DC are more effective in demulsifying than DA and triblock copolymers. DC achieved a 100% dehydration ratio at a low dosage of 75 ppm after 120 min. DC's remarkable performance can be attributed to its aromatic core, molecular weight, and high interfacial activity. According to the rheological data, a higher dehydrating ratio is attained when the demulsifier has a great capacity to lower the viscoelasticity of the W/O emulsion interface. The maximum decrease in G' and G″ values was attained by DC. The mechanism of DC's demulsifying interaction on a naturally occurring W/O emulsion was elucidated.

Novel Bio-Based Amphiphilic Ionic Liquids for the Efficient Demulsification of Heavy Crude Oil Emulsions

In the last few decades, there has been an increasing trend for the usage of natural products and their derivatives as green and renewable oil-filed chemicals. Use of these compounds or their derivatives contributes to reducing the use of traditional chemicals, and enhances green chemistry principles. Curcumin (CRC) is one of the most popular natural products and is widely available. The green character, antioxidant action, and low cost of CRC prompt its use in several applications. In the present study, Curcumin was used to synthesize two new amphiphilic ionic liquids (AILs) by reacting with 1,3-propanesultone or bromoacetic acid to produce corresponding sulfonic and carboxylic acids, CRC-PS and CRC-BA, respectively. Following this, the formed CRC-PS and CRC-BA were allowed to react with 12-(2-hydroxyethyl)-15-(4-nonylphenoxy)-3,6,9-trioxa-12-azapentadecane-1,14-diol (HNTA) to form corresponding AILs, GCP-IL and GRB-IL, respectively. The chemical structures, surface tension, interfacial tension, and relative solubility number (RSN) of the synthesized AILs were investigated. The efficiency of GCP-IL and GRB-IL to demulsify water in heavy crude oil (W/O) emulsions was also investigated, where we observed that both GCP-IL and GRB-IL served as high-efficiency demulsifiers and the efficiency increased with a decreased ratio of water in W/O emulsion. Moreover, the data showed an increased efficiency of these AILs with an increased concentration. Among the two AILs, under testing conditions, GCP-IL exhibited a higher efficiency, shorter demulsification time, and cleaner demulsified water.