Reactive Adsorption of Parabens on Synthesized Micro- and Mesoporous Silica from Coal Fly Ash: pH Effect on the Modification Process

Modified Cellulose for Adsorption of Methylparaben and Butylparaben from an Aqueous Solution

Emerging contaminants are chemical products that are found in low concentrations, are not regulated by environmental norms, and cause health effects. Among this group of contaminants are parabens, a family of p-hydroxybenzoic acid esters used as preservatives in cosmetics, pharmaceuticals, and food products. Recent research describes parabens as endocrine disruptors that can cause health alterations. Some of the best alternatives for pollutant removal include the adsorption process, which can use materials that are inexpensive, abundant, and susceptible to modifications. In this sense, cellulose can be an option for obtaining materials that can be used in the removal of contaminants. This research investigates the synthesis of benzoic cellulose (MCB) and magnetic cellulose (MCM) as well as its use as an adsorbent for the removal of methylparaben (MP) and butylparaben (BP) from water. Likewise, physicochemical characterization, including Fourier transform infrared (FTIR), scanning electronic microscopy (SEM), energy-dispersive spectroscopy (EDS), X-ray diffraction (XRD), and thermogravimetric analysis (TGA), for both cellulose materials was carried out. Moreover, pseudo-first-order, pseudo-second-order, Elovich, Weber, Morris, and Boyd models were used to investigate the adsorption kinetics. As a result, the pseudo-second-order model was favorable for both modified cellulose and the two parabens assayed. Finally, Freundlich, Langmuir, and Sips adsorption isotherm models were investigated; the Langmuir model was the best for the adsorption isotherm data. The adsorption of methylparaben and butylparaben was in the following order: MCM > MCB. The maximum adsorption capacity of MP and BP for MCM was 9.58 and 12.03 mg g-1, respectively. For instance, the results showed that the modified cellulose adsorbed the parabens physically, which could involve electrostatic attraction, hydrogen bonding, π-π bonding, and hydrophobic interactions.

Mesoporous Silica Derived from Municipal Solid Waste Incinerator (MSWI) Ash Slag: Synthesis, Characterization and Use as Supports for Au(III) Recovery

In this study, the effect of NaOH on the synthesis of mesoporous silica (MS) by using municipal solid-waste incinerator (MSWI) ash slag was investigated. Moreover, the prepared MS was used as a support to evaluate its potential for the recovery of gold ions (Au(III)) from aqueous solution. The extraction process for the MSWI ash slag activated through mechanical grinding entailed alkali treatment, using varying concentrations of NaOH. The content of Si extracted from MSWI ash slag increased with the increasing grinding time and NaOH concentration. As the NaOH concentration increased, the pore structure (e.g., Brunauer–Emmett–Teller (BET) surface area and pore volume) of the synthesized MS improved. In addition, the amount of adsorbed Au(III) increased with increasing sulfur content immobilized on the support, and the sulfur content was in turn governed by the silanol content of the MS support. The adsorbent prepared by using the MS-3M support exhibited the highest Au(III) adsorption capacity (110.3 mg/g), and its adsorption–desorption efficiency was not significantly affected even after five adsorption–desorption cycles.

Toxicity and removal of parabens from water: A critical review

Parabens are biocides used as preservatives in food, cosmetics and pharmaceuticals. They possess antibacterial and antifungal activity due to their ability to disrupt cell membrane and intracellular proteins, and cause changes in enzymatic activity of microbial cells. Water, one of our most valuable natural resource, has become a huge reservoir for parabens. Halogenated parabens from chlorination/ozonation of water contaminated with parabens have shown to be even more persistent in water than other types of parabens. Unfortunately, there is dearth of data on their (halogenated parabens) presence and fate in groundwater which serves as a major source of drinking water for a huge population in developing countries. An attempt to neglect the presence of parabens in water will expose man to it through ingestion of contaminated food and water. Although there are reviews on the occurrence, fate and behaviour of parabens in the environment, they largely omit toxicity and removal aspects. This review therefore, presents recent reports on the acute and chronic toxicity of parabens, their estrogenic agonistic and antagonistic activity and also their relationship with antimicrobial resistance. This article further X-rays several techniques that have been employed for the removal of parabens in water and their drawbacks including adsorption, biodegradation, membrane technology and advanced oxidation processes (AOPs). The heterogeneous photocatalytic process (one of the AOPs) appears to be more favoured for removal of parabens due to its ability to mineralize parabens in water. However, more work is needed to improve this ability of heterogeneous photocatalysts. Perspectives that will be relevant for future scientific studies and which will drive policy shift towards the presence of parabens in our drinking waters are also offered. It is hoped that this review will elicit some spontaneous actions from water professionals, scientists and policy makers alike that will provide more data, effective technologies, and adaptive policies that will address the growing threat of the presence of parabens in our environment with respect to human health.

The degradation of paraben preservatives: Recent progress and sustainable approaches toward photocatalysis

Parabens are a class of compounds primarily used as antimicrobial preservatives in pharmaceutical products, cosmetics, and foodstuff. Their widely used field leads to increasing concentrations detected in various environmental matrices like water, soil, and sludges, even detected in human tissue, blood, and milk. Treatment techniques, including chemical advanced oxidation, biological degradation, and physical adsorption processes, have been widely used to complete mineralization or to degrade parabens into less complicated byproducts. All kinds of processes were reviewed to give a completed picture of parabens removal. In light of these treatment techniques, advanced photocatalysis, which is emerging rapidly and widely as an economical, efficient, and environmentally-friendly technique, has received considerable attention. TiO₂-based and non-TiO₂-based photocatalysts play an essential role in parabens degradation. The effect of experimental parameters, such as the concentration of targeted parabens, concentration of photocatalyst, reaction time, and initial solution pH, even the presence of radical scavengers, are surveyed and compared from the literature. Some representative parabens such as methylparaben, propylparaben, and benzylparaben have been successfully studied the reaction pathways and their intermediates in their degradation process. As reported in the literature, the degradation of parabens involves the production of highly reactive species, mainly hydroxyl radicals. These reactive radicals would attack the paraben preservatives, break, and finally mineralize them into simpler inorganic and nontoxic molecules. Concluding perspectives on the challenges and opportunities for photocatalysis toward parabens remediation are also intensively highlighted.

Cytotoxicity of mesoporous silica modified by amino and carboxyl groups on vascular endothelial cells

Mesoporous silica is widely used because of its unique and excellent properties, especially it can be used as a drug carrier and gene carrier in the biomedical field. After the mesoporous silica is put into clinical use, it is more likely to be exposed in human body. Therefore, the effect of mesoporous silica on human body cannot be ignored. The injury of vascular endothelial cells is a prerequisite for the occurrence of many cardiovascular diseases. As a drug and gene carrier, mesoporous silica increases its contact with vascular endothelial cells, so its toxic effect on cardiovascular system cannot be ignored. In this study, amino (NH₂ ) and carboxyl (COOH) were modified on mesoporous silica SBA-15 by post-grafting. The results showed that it still maintained the one-dimensional hexagonal mesoporous structure of SBA-15 and had typical mesoporous structure. Then human umbilical vein endothelial cells (HUVECs) were infected with SBA-15, NH₂ -SBA-15, and COOH-SBA-15. The results showed that the functionalized mesoporous silica SBA-15 had cytotoxicity to HUVECs and damaged the cell membrane, but compared with the unmodified mesoporous silica SBA-15 the cytotoxicity of functionalized mesoporous silica SBA-15 was lower and the toxicity of carboxyl modified group was the lowest. By comparing the cell inhibition rate and the expression level of lactate dehydrogenate and reactive oxygen species induced by the three materials, oxidative damage and cell membrane damage may be two mechanisms of cytotoxicity. Mesoporous silica SBA-15 has an effect on cardiovascular system by inducing the high expression of nitric oxide, intercellular adhesive molecule-1 and vascular cell adhesive molecule-1 in HUVECs. In summary, our results show that mesoporous silica is toxic to vascular endothelial cells.