Facile Synthesis of Self-Assembled NiFe Layered Double Hydroxide-Based Azobenzene Composite Films with Photoisomerization and Chemical Gas Sensor Performances

Noninvasive Colorimetric Detection of Acetic Acid in Human Breath Based on an Alginate/Ni-Al-LDH/Dye Composite Film

Alginate/Ni-Al-layered double hydroxide/dye (Alg/Ni-Al-LDH/dye) composite films were fabricated using the solution casting method. The dyes used included methyl red, phenol red, thymol blue, bromothymol blue, m-cresol purple, methyl orange, bromocresol purple (BP), and bromocresol green (BG) in the overall pH range of 3.8 to 9.6. The chemical composition and morphology of the Alg/Ni-Al-LDH/dye composite film structure were investigated by Fourier transform infrared spectroscopy, FESEM, atomic force microscopy, and X-ray diffraction. The Alg/Ni-Al-LDH/dye composite films were semitransparent and mechanically flexible. Acetic acid was investigated as a respiratory biomarker related to gastrointestinal diseases. The parameters studied included color volume, response time, Ni-Al-LDH nanosheet volume, reusability, and drawing of the calibration curve along with statistical features including standard deviation, relative standard deviation, limit of detection, and limit of quantitation. Colorimetric indicators BP and BG in the presence of acetic acid produce color changes that are almost visible to the naked eye. However, other used indicators have shown almost no change. Therefore, it can be reported that the sensors made in the presence of BP and BG act selectively in relation to acetic acid.

Glow discharge plasma stabilization of azo dye on PMMA polymer

The effects of argon gas glow discharge plasma on the surface of DR1 dye-loaded PMMA polymer films are examined in this work. Plasma immobilizes the dye on the surface of polymer without using stabilizers. Argon plasma activates the surface through breaking some bonds and generation of radical sites. It affects the acrylate groups of PMMA leading to covalent bonds between dye and surface of polymer. In addition, plasma treatment and contact with ambient air may result in the creation of new polar components, such as carbonyl and carboxyl compounds and links that enhance the dye attachment to the polymer matrix. Besides, the dye adsorption on the polymer film is impacted by changes in surface topography. Furthermore, plasma modifies the dye conformation, which affects the adherence of the dye to the polymer surface through bringing the dye to the higher energy state. The chemical and topographical modification of dye-loaded PMMA films by plasma are investigated by spectroscopic and AFM methods. Furthermore, aging process was used to confirm dye retention on the polymer film after plasma modification as opposed to dye-loaded polymer film that was left untreated as a reference sample. Finally, investigated method suggests a novel and very affordable technique for fabrication of poly(MMA-co-DR1) copolymer in the form of a homogeneous surface layer.

Electrochemical, Isotherm, and Material Strength Studies of Cucumeropsis mannii Shell Extract on A515 Grade 70 Carbon Steel in NaCl Solution

In this study, corrosion inhibition efficiency of Cucumeropsis mannii shell extract (CMSE) was tested on A515 Grade 70 carbon steel in 1.0 M NaCl solution. Potentiodynamic polarization (PDP), electrochemical impedance spectroscopy (EIS), and weight loss (WL) measurements were used to investigate the inhibition efficiency. Scanning electron microscopy, Fourier transform infrared spectroscopy, atomic adsorption spectroscopy, and energy dispersive spectroscopy were used to characterize the carbon steel and extract. PDP and EIS measurements revealed maximum inhibition efficiency of 91.2% and 92.2%, respectively. Tafel plot confirmed inhibitor to be a mixed type. A monolayer adsorption of CMSE molecules occurred spontaneously by physisorption. Polarization resistance increased with increasing inhibitor concentration. WL measurement revealed decrease in corrosion rate with increasing concentration of corrosion inhibitor. Maximum Young modulus and hardness of 202.4 GPa and 112.3 BHN, respectively, were recorded for the carbon steel at a minimum corrosion rate and load. Pitting and uniform corrosion were formed on the carbon steel in the absence of CMSE. CMSE contains –OH, –OCH3, and –C-NH3 as active functional groups. In conclusion, Cucumeropsis mannii shell extract acted excellently as corrosion inhibitor for A515 Grade 70 carbon steel in 1.0 M NaCl.

The Past and the Future of Langmuir and Langmuir-Blodgett Films

The Langmuir-Blodgett (LB) technique, through which monolayers are transferred from the air/water interface onto a solid substrate, was the first method to allow for the controlled assembly of organic molecules. With its almost 100 year history, it has been the inspiration for most methods to functionalize surfaces and produce nanocoatings, in addition to serving to explore concepts in molecular electronics and nanoarchitectonics. This paper provides an overview of the history of Langmuir monolayers and LB films, including the potential use in devices and a discussion on why LB films are seldom considered for practical applications today. Emphasis is then given to two areas where these films offer unique opportunities, namely, in mimicking cell membrane models and exploiting nanoarchitectonics concepts to produce sensors, investigate molecular recognitions, and assemble molecular machines. The most promising topics for the short- and long-term prospects of the LB technique are also highlighted.

The influence of surface proximity on photoswitching activity of stilbene-functionalized N-heterocyclic carbene monolayers

Self-assembly of photo-responsive molecules is a robust technology for reversibly tuning the properties of functional materials. Herein, we probed the crucial role of surface-adsorbate interactions on the adsorption geometry of stilbene-functionalized N-heterocyclic carbenes (stilbene-NHCs) monolayers and its impact on surface potential. Stilbene-NHCs on Au film accumulated in a vertical orientation that enabled high photoisomerization efficiency and reversible changes in surface potential. Strong metal-adsorbate interactions led to flat-lying adsorption geometry of stilbene-NHCs on Pt film, which quenched the photo-isomerization influence on surface potential. It is identified that photo-induced response can be optimized by positioning the photo-active group in proximity to weakly-interacting surfaces.

Polymer Nanocomposites for Photocatalytic Degradation and Photoinduced Utilizations of Azo-Dyes

Specially designed polymer nanocomposites can photo-catalytically degrade azo dyes in wastewater and textile effluents, among which TiO2-based nanocomposites are outstanding and extensively explored. Other nanocomposites based on natural polymers (i.e., chitosan and kaolin) and the oxides of Al, Au, B, Bi, Fe, Li, and Zr are commonly used. These nanocomposites have better photocatalytic efficiency than pure TiO2 through two considerations: (i) reducing the hole/electron recombination rate by stabilizing the excited electron in the conducting band, which can be achieved in TiO2-nanocomposites with graphene, graphene oxide, hexagonal boron nitride (h-BN), metal nanoparticles, or doping; (ii) decreasing the band energy of semiconductors by forming nanocomposites between TiO2 and other oxides or conducting polymers. Increasing the absorbance efficiency by forming special nanocomposites also increases photocatalytic performance. The photo-induced isomerization is exploited in biological systems, such as artificial muscles, and in technical fields such as memory storage and liquid crystal display. Heteroaryl azo dyes show remarkable shifts in photo-induced isomerization, which can be applied in biological and technical fields in place of azo dyes. The self-assembly methods can be employed to synthesize azo-dye polymer nanocomposites via three types of interactions: electrostatic interactions, London forces or dipole/dipole interactions between azo dyes, and photo alignments.

A novel non-enzymatic glucose sensor based on NiFe(NPs)-polyaniline hybrid materials

This article was focused on the elaboration of NiFe-Polyaniline glucose sensors via electrochemical technique. Firstly, the PANi (polyaniline) fibers were synthesized by oxidation of the monomer aniline on FTO (fluorine tin oxide) substrate. Secondly, the Nickel-Iron nanoparticles (NiFe (NPs)) were obtained by the Chronoamperometry method on the Polyaniline surface. The NiFe-PANi hybrid electrode was characterized by scanning electron microscopy (SEM), force atomic microscopy (AFM), Fourier-transformed infrared (FTIR), and X-ray diffraction (XRD). The electrochemical glucose sensing performance of the NiFe alloy nanoparticle was studied by cyclic voltammetry and amperometry. The fabricated glucose sensor Ni-Fe hybrid material exhibited many remarkable sensing performances, such as low-response time (4 s), sensitivity (1050 μA mM^-1 cm^-2), broad linear range (from 10 μM -1 mM), and low limit of detection (LOD) (0.5 μM, S/N = 3). The selectivity, reliability, and stability of the NiFe hybrid material for glucose oxidation were also investigated. All the results demonstrated that the NiFe-PANi/FTO hybrid electrode is very promising for application in electrochemical glucose sensing.

Effect of Preparation Method on the Catalytic Property of Calcined Ca-Al Hydrotalcite for the Synthesis of Ethyl Methyl Carbonate

Calcined Ca-Al hydrotalcites were prepared by a clean method (CaAl-1) and coprecipitation (CaAl-2), respectively. Effects of preparation methods on the structure and catalytic property of calcined Ca-Al hydrotalcites were investigated. The samples were characterized by X-ray diffraction (XRD), inductively coupled plasma optical emission spectroscopy (ICP-AES), X-ray photoelectron spectroscopy (XPS), thermogravimetric (TG), CO2-programmed temperature desorption method (CO2-TPD), low-temperature N2 adsorption-desorption, and the Hammett indicator method. Compared with CaAl-2, CaAl-1 had a higher specific surface area and surface alkali density, which makes it have relatively higher catalytic activity for transesterification synthesis of ethyl methyl carbonate (EMC). Also, a 50.6% yield of EMC was obtained in the presence of 1.5% CaAl-1 at 100 °C in 1 h. Moreover, the catalytic activity of CaAl-1 showed no remarkable change after five runs.

A review on optical sensors based on layered double hydroxides nanoplatforms

In recent years, significant efforts have been devoted towards the fabrication and application of layered double hydroxides (LDHs) due to their tremendous features such as excellent biocompatibility with negligible toxicity, large surface area, high conductivity, excellent solubility, and ion exchange properties. Most impressive, LDHs offer a favorable environment to attach several substances such as quantum dots, fluorescein dyes, proteins, and enzymes, which leads to strengthening the catalytic properties or increasing the sensing selectivity and sensitivity of the resulted hybrids. With the extensive ongoing research on the application of nanomaterials, many studies have led to remarkable achievements in exploring LDHs as sensing nanoplatforms. In optical sensors, for instance, many sensing strategies were tailored based on the enzyme-mimicking properties of LDHs, including colorimetric and chemiluminescence procedures. Meanwhile, others were designed based on intercalating some fluorogenic substrates on the LDHs, whereby the sensing signal can be acquired by quenching or enhancing their fluorescence after the addition of analytes. In this review, we aim to summarize the recent advances in optical sensors that use layered double hydroxides as sensing platforms for the determination of various analytes. By outlining some representative examples, we accentuate the change of spectral absorbance, chemiluminescence, and photoluminescence phenomena triggered by the interaction of LDH or functionalized-LDH with the indicators and analytes in the system. And finally, current limitations and possible future orientation in designing further LDHs-based optical sensors are presented. It is hoped that this review will be helpful in assisting the establishment of more improved sensors based on LDHs features. Optical sensors based on layered double hydroxides (LDHs) nanoplatforms were reviewed. The sensing system and detection approaches were rationally reviewed. Possible future orientations were highlighted.

Langmuir films of low-dimensional nanomaterials

A large number of low-dimensional nanomaterials having different shapes and being dispersible in solvents open a fundamental question if there is a universal deposition technique for the monolayer formation. A monolayer formation of various nanomaterials at the air-water interface, also known as a Langmuir film, is a well-established technique even for the large group of the recently developed low-dimensional nanomaterials. In this review, we cover the monolayer formation of the zero-dimensional, one-dimensional and two-dimensional nanomaterials. Thanks to the formation of a Langmuir layer at the thermodynamic equilibrium, by using a suitable nanomaterial dispersion and subphase, the monolayers can be formed from all kinds of materials, ranging from the graphene oxide to the semiconducting quantum dots. In this review, we will discuss the basic requirements for the successful formation of monolayers and summarize the recent scientific advances in the field of Langmuir films.

Rapid detection of ziram residues in apple and pear fruits by SERS based on octanethiol functionalized bimetallic core-shell nanoparticles

Existing approaches for the screening of unsafe materials in food matrices are time-consuming, tiresome and destructive in nature. Therefore, in the current study, a surface-enhanced Raman spectroscopy (SERS) method based on octanethiol-functionalized core-shell nanoparticles (Oct/Au@AgNPs) was established for rapid detection of ziram in apple and pear fruits. The morphology of substrate was evaluated using high-resolution TEM images and superimposed HAADF-STEM-EDS elemental mapping images, which confirmed that Au@AgNPs having gold (Au) core size of 28 nm in diameter and silver (Ag) shell of 5.5 nm in thickness were successfully grafted with octanethiol. The SERS method with the sensitive nanoparticles could detect ziram of up to 0.015 and 0.016 ppm in apple and pear with high coefficients of determination (R²) of 0.9987 and 0.9993, respectively. Furthermore, satisfactory recoveries (80-106%) were also accomplished for the fungicide in real samples. This work demonstrated that the functionalized silver-coated gold nanoparticles were easy to prepare and could be used as sensitive SERS platforms for monitoring of other agrochemicals in foods.

Facile Fabrication of SrTiO3@MoS2 Composite Nanofibers for Excellent Photodetector Application

Molybdenum disulfide (MoS2), as a kind of transition metal dichalcogenide, has been widely studied for its excellent compatibility with most of inorganic nanomaterials. Nevertheless, its microscale and agglomeration limit the performance severely. Therefore, the special structure of V-MoS2 has drawn a lot of interest, which can not only reduce the size of MoS2 nanosheets but also improve the valence electron structure of the materials. In this work, SrTiO3@MoS2 composite nanofibers were synthesized by the simple electrospinning and hydrothermal method, and it was applied as a novel material for photodetector. SEM, TEM, EDX, XRD, I-T curves, and EIS analysis were used to study the structure and properties of the prepared SrTiO3@MoS2 composite nanofibers. Simulating under sunlight at a potential of 1.23 V, the prepared composite materials exhibited a superior photoelectric performance of photocurrent density of 21.4 μA and a resistance of 2.3 Ω. These results indicate that the composite of SrTiO3 nanofiber adhered with V-MoS2 has a stable composite structure, good electrical conductivity, and photoelectric sensitivity and is a suitable material for photodetectors. This work provides new ideas for the preparation of self-assembled materials and their application in photodetectors.

Preparation and High Photocurrent Generation Enhancement of Self-Assembled Layered Double Hydroxide-Based Composite Dye Films

Understanding photocurrent conversion of layered double hydroxide (LDH) materials will be a key step in the future application of these materials to light-capturing molecular devices. In the present study, ultrathin nickel-iron layered double hydroxide/dye (NF-LDH/dye) Langmuir-Blodgett (LB) semiconductor films were prepared using an LB device and deposited on an indium tin oxide (ITO) substrate as a photoanode. The photoelectric conversion efficiency of the prepared LB semiconductor film materials was tested. A comparative experiment was performed to effectively explore the photoelectric conversion performances of the LB semiconductor film materials. Specifically, the NF-LDH cast film electrode, the dye cast film electrode, and an ultrathin composite LB film electrode were used as typical samples to explore photoelectric conversion performances. The electrochemical workstation was used to study the photocurrent density, linear scanning voltammetry curve, and electrochemical impedance spectroscopy of LB film electrodes with different layers. The results show that the film electrode cast by LDH alone or dye alone produces weak photocurrent. The photoelectric conversion efficiency of the LB film electrode is enhanced due to the different dyes' molecular structures and/or aggregations on the surface of LDH with various morphological patterns. The combined NF-LDH/dye composite LB film photoelectrode can generate a photocurrent that is 2-5 times stronger than the raw material, and the stable use efficiency is more than 92%. Present obtained composite LB films demonstrated a uniform morphology and good photoelectric conversion ability. This work provides a useful reference for the field of LDH semiconductor optoelectronic devices and solar cells.

Synergism of Multicomponent Catalysis: One-Dimensional Pt-Rh-Pd Nanochain Catalysts for Efficient Methanol Oxidation

Designing Pt-based alloy catalysts with multicomponent composition and a controllable structure is important to improve the utilization efficiency of precious metals and catalytic activity, but it still face a lot of challenges for simple preparation. Herein, we used insulin amyloid fibrils as templates and their own one-dimensional spiral structure to synthesize Pt-Rh-Pd ternary alloy nanochains under mild conditions. The prepared Pt-Rh-Pd alloy nanochains (NCs) have uniform diameter, and the particle size is only 2 nm. This ultrafine structure increases the specific surface area of the catalyst to a certain extent, and the synergistic effect of the three metals improves the catalytic performance. Compared with commercial Pt/C and binary Pt-Rh NCs, the as-presented Pt-Rh-Pd NCs show better methanol oxidation activity ability and stability against CO poisoning. The peak current density of front sweep is 1.48 mA cm-2, which is 1.7 times higher than that of commercial Pt/C (0.89 mA cm-2) and 1.4 times higher than that of the Pt-Rh NCs (1.07 mA cm-2), indicating great application potential as high-performance electrocatalysts in fuel cells.

Fabrication of Hydrogels via Host-Guest Polymers as Highly Efficient Organic Dye Adsorbents for Wastewater Treatment

New self-assembled hydrogel materials of poly(vinyl alcohol)/cyclodextrin-modified poly(acrylic acid)/azobenzene-modified poly(acrylic acid) (PVA/PAA-CD/PAA-Azo) were successfully prepared via host-guest interactions and hydrogen bonds. The as-prepared hydrogel materials were characterized by various techniques, including Fourier transform infrared spectroscopy, X-ray diffraction analysis, scanning electron microscopy, ultraviolet spectroscopy, and specific surface area tests. The prepared hydrogels with different concentrations of PVA exhibited different network structures. In addition, ultraviolet (UV) light irradiation and temperature change induce a gel-sol phase transition in the hydrogel materials. The obtained hydrogel materials could be used as good adsorbents for two model organic dye molecules, which was mainly due to electrostatic interactions between methylene blue/rhodamine B (MB/RhB) and the gels in the adsorption process. In particular, the adsorption processes of the as-prepared hydrogel materials conformed to the pseudo-first-order model with a high correlation coefficient, which indicates that gel has a potential application in the field of wastewater purification.

Self-assembled functional components-doped conductive polypyrrole composite hydrogels with enhanced electrochemical performances

A conductive hydrogel is a composite conductive material formed by combining a conductive polymer with a nanogel structure of a hydrogel. Conductive hydrogels not only have potential applications in supercapacitors, sensors, and modulators, they can also be synthesized by many methods, such as copolymerization, crosslinking, and grafting. In this work, we successfully prepared three conductive composite hydrogels by in situ polymerization, namely polypyrrole sodium alginate conductive hydrogel, ferric chloride-doped polypyrrole sodium alginate hydrogel and doped polypyrrole sodium alginate hydrogel with sodium dodecylbenzene sulfonate. In addition, a series of characterizations were performed for the three conductive hydrogels described above. The results show that the polypyrrole sodium alginate hydrogel doped with ferric chloride forms a nanofiber network with a more stable structure and better electrochemical performance.

New functional components-doped conductive polypyrrole composite hydrogels are prepared via a self-assembled process, demonstrating potential applications in catalysis as well as electrochemical materials.

Fabrication of CS/GA/RGO/Pd composite hydrogels for highly efficient catalytic reduction of organic pollutants

In this study, natural polymer material chitosan (CS) and graphene oxide (GO) with large specific surface area were used to prepare a new CS/RGO-based composite hydrogel by using glutaraldehyde (GA) as cross-linking agent. In addition, a CS/GA/RGO/Pd composite hydrogel was prepared by loading palladium nanoparticles (Pd NPs). The morphologies and microstructures of the prepared hydrogels were characterized by SEM, TEM, XRD, TG, and BET. The catalytic performance of the CS/GA/RGO/Pd composite hydrogel was analyzed, and the experimental results showed that the CS/GA/RGO/Pd composite hydrogel had good catalytic performance for degradation of p-nitrophenol (4-NP) and o-nitroaniline (2-NA). Therefore, this study has potential application prospect in wastewater treatment and provides new information for composite hydrogel design.

New functional CS/GA/RGO/Pd composite hydrogels are prepared via a self-assembly process, demonstrating potential applications in catalysis as well as composite materials.