In Silico Rational Design and Virtual Screening of Bioactive Peptides Based on QSAR Modeling

Structure-Guided Antiviral Peptides Identification Targeting the HIV-1 Integrase

HIV-1 integrase (IN), a major protein in the HIV life cycle responsible for integrating viral cDNA into the host DNA, represents a promising drug target. Small peptides have emerged as antiviral therapeutics for HIV because of their facile synthesis, highly selective nature, and fewer side effects. However, selecting the best candidates from a vast pool of peptides is a daunting task. In this study, multistep virtual screening was employed to identify potential peptides from a list of 280 HIV inhibitory peptides. Initially, 80 peptides were selected based on their minimum inhibitory concentrations (MIC). Then, molecular docking was performed to evaluate their binding scores compared to HIP000 and HIP00N which are experimentally validated HIV-1 integrase binding peptides that were used as a positive and negative control, respectively. The top-scoring docked complexes, namely, IN-HIP1113, IN-HIP1140, IN-HIP1142, IN-HIP678, IN-HIP776, and IN-HIP777, were subjected to initial 500 ns molecular dynamics (MD) simulations. Subsequently, HIP776, HIP777, and HIP1142 were selected for an in-depth mechanistic study of peptide interactions, with multiple simulations conducted for each complex spanning one microsecond. Independent simulations of the peptides, along with comparisons to the bound state, were performed to elucidate the conformational dynamics of the peptides. These peptides exhibit strong interactions with specific residues, as revealed by snapshot interaction analysis. Notably, LYS159, LYS156, VAL150, and GLU69 residues are prominently involved in these interactions. Additionally, residue-based binding free energy (BFE) calculations highlight the significance of HIS67, GLN148, GLN146, and SER147 residues within the binding pocket. Furthermore, the structure-activity relationship (SAR) analysis demonstrated that aromatic amino acids and the overall volume of peptides are the two major contributors to the docking scores. The best peptides will be validated experimentally by incorporating SAR properties, aiming to develop them as therapeutic agents and structural models for future peptide-based HIV-1 drug design, addressing the urgent need for effective HIV treatments.

Special Issue: "Rational Design and Synthesis of Bioactive Molecules"

The rational design of novel bioactive molecules is a critical but challenging task in drug discovery [...].

The novel angiotensin-I-converting enzyme inhibitory peptides from Scomber japonicus muscle protein hydrolysates: QSAR-based screening, molecular docking, kinetic and stability studies

Food-derived angiotensin-converting enzyme-inhibitory (ACE-I) peptides have attracted extensive attention. Herein, the ACE-I peptides from Scomber japonicus muscle hydrolysates were screened, and their mechanisms of action and inhibition stability were explored. The quantitative structure-activity relationship (QSAR) model based on 5z-scale metrics was developed to rapidly screen for ACE-I peptides. Two novel potential ACE-I peptides (LTPFT, PLITT) were predicted through this model coupled with in silico screening, of which PLITT had the highest activity (IC50: 48.73 ± 7.59 μM). PLITT inhibited ACE activity with a mixture of non-competitive and competitive mechanisms, and this inhibition mainly contributed to the hydrogen bonding based on molecular docking study. PLITT is stable under high temperatures, pH, glucose, and NaCl. The zinc ions (Zn2+) and copper ions (Cu2+) enhanced ACE-I activity. The study suggests that the QSAR model is effective in rapidly screening for ACE-I inhibitors, and PLITT can be supplemented in foods to lower blood pressure.

Virtual Screening of Peptide Libraries: The Search for Peptide-Based Therapeutics Using Computational Tools

Over the last few decades, we have witnessed growing interest from both academic and industrial laboratories in peptides as possible therapeutics. Bioactive peptides have a high potential to treat various diseases with specificity and biological safety. Compared to small molecules, peptides represent better candidates as inhibitors (or general modulators) of key protein-protein interactions. In fact, undruggable proteins containing large and smooth surfaces can be more easily targeted with the conformational plasticity of peptides. The discovery of bioactive peptides, working against disease-relevant protein targets, generally requires the high-throughput screening of large libraries, and in silico approaches are highly exploited for their low-cost incidence and efficiency. The present review reports on the potential challenges linked to the employment of peptides as therapeutics and describes computational approaches, mainly structure-based virtual screening (SBVS), to support the identification of novel peptides for therapeutic implementations. Cutting-edge SBVS strategies are reviewed along with examples of applications focused on diverse classes of bioactive peptides (i.e., anticancer, antimicrobial/antiviral peptides, peptides blocking amyloid fiber formation).

Mathematical Approach to Protein Sequence Comparison Based on Physiochemical Properties

The difficult aspect of developing new protein sequence comparison techniques is coming up with a method that can quickly and effectively handle huge data sets of various lengths in a timely manner. In this work, we first obtain two numerical representations of protein sequences separately based on one physical property and one chemical property of amino acids. The lengths of all the sequences under comparison are made equal by appending the required number of zeroes. Then, fast Fourier transform is applied to this numerical time series to obtain the corresponding spectrum. Next, the spectrum values are reduced by the standard inter coefficient difference method. Finally, the corresponding normalized values of the reduced spectrum are selected as the descriptors for protein sequence comparison. Using these descriptors, the distance matrices are obtained using Euclidian distance. They are subsequently used to draw the phylogenetic trees using the UPGMA algorithm. Phylogenetic trees are first constructed for 9 ND4, 9 ND5, and 9 ND6 proteins using the polarity value as the chemical property and the molecular weight as the physical property. They are compared, and it is seen that polarity is a better choice than molecular weight in protein sequence comparison. Next, using the polarity property, phylogenetic trees are obtained for 12 baculovirus and 24 transferrin proteins. The results are compared with those obtained earlier on the identical sequences by other methods. Three assessment criteria are considered for comparison of the results-quality based on rationalized perception, quantitative measures based on symmetric distance, and computational speed. In all the cases, the results are found to be more satisfactory.

High throughput virtual screening (HTVS) of peptide library: Technological advancement in ligand discovery

High-throughput virtual screening (HTVS) is a leading biopharmaceutical technology that employs computational algorithms to uncover biologically active compounds from large-scale collections of chemical compound libraries. In addition, this method often leverages the precedence of screening focused libraries for assessing their binding affinities and improving physicochemical properties. Usually, developing a drug sometimes takes ages, and lessons are learnt from FDA-approved drugs. This screening strategy saves resources and time compared to laboratory testing in certain stages of drug discovery. Yet in-silico investigations remain challenging in some cases of drug discovery. For the last few decades, peptide-based drug discoveries have received remarkable momentum for several advantages over small molecules. Therefore, developing a high-fidelity HTVS platform for chemically versatile peptide libraries is highly desired. This review summarises the modern and frequently appreciated HTVS strategies for peptide libraries from 2011 to 2021. In addition, we focus on the software used for preparing peptide libraries, their screening techniques and shortcomings. An index of various HTVS methods reported here should assist researchers in identifying tools that could be beneficial for their peptide library screening projects.

Comprehensive Evaluation and Comparison of Machine Learning Methods in QSAR Modeling of Antioxidant Tripeptides

Due to their multiple beneficial effects, antioxidant peptides have attracted increasing interest. Currently, the screening and identification of bioactive peptides, including antioxidative peptides based on wet-chemistry methods are time-consuming and highly rely on many advanced instruments and trained personnel. Quantitative structure-activity relationship (QSAR) analysis as an in silico method can be more efficient and cost-effective. However, model performance of QSAR studies on antioxidant peptides was still poor due to limited attempts in model development approaches. The objective of this study was to compare popular machine learning methods for antioxidant activity modeling and screening of tripeptides and identify the critical amino acid features that determine the antioxidant activity. 533 numerical indices of amino acids were adopted to characterize 130 tripeptides with known antioxidant activity from the published literature, and then 7 feature selection strategies plus pairwise correlation were used to screen the most important indices for antioxidant activity and model building. 14 machine learning methods were used to build models based on the feature selection strategies, respectively. Among the 98 models, non-linear regression methods tended to perform better, and the best model with an R ² _Test of 0.847 and RMSE_Test of 0.627 for tripeptide antioxidants was obtained by combining random forest for feature selection and tree-based extreme gradient boost regression for model development. Based on the predicted antioxidant values of 7870 unknown tripeptides, potentially high antioxidant activity tripeptides all have a tyrosine, tryptophan, or cysteine residue at the C-terminal position. Furthermore, the predicted antioxidant activity of six synthesized tripeptides was confirmed through experimental determination, and for the first time, the cysteine or tyrosine residue at the C-terminal was found to be critical to the antioxidant activity based on both QSAR models and experimental observations.

An Overview of Antiviral Peptides and Rational Biodesign Considerations

Viral diseases have contributed significantly to worldwide morbidity and mortality throughout history. Despite the existence of therapeutic treatments for many viral infections, antiviral resistance and the threat posed by novel viruses highlight the need for an increased number of effective therapeutics. In addition to small molecule drugs and biologics, antimicrobial peptides (AMPs) represent an emerging class of potential antiviral therapeutics. While AMPs have traditionally been regarded in the context of their antibacterial activities, many AMPs are now known to be antiviral. These antiviral peptides (AVPs) have been shown to target and perturb viral membrane envelopes and inhibit various stages of the viral life cycle, from preattachment inhibition through viral release from infected host cells. Rational design of AMPs has also proven effective in identifying highly active and specific peptides and can aid in the discovery of lead peptides with high therapeutic selectivity. In this review, we highlight AVPs with strong antiviral activity largely curated from a publicly available AMP database. We then compile the sequences present in our AVP database to generate structural predictions of generic AVP motifs. Finally, we cover the rational design approaches available for AVPs taking into account approaches currently used for the rational design of AMPs.

Conventional and in silico approaches to select promising food-derived bioactive peptides: A review

•

Seaweed and edible insects are considered new sources of bioactive peptides.

•

Conventional approaches are necessary to validate the bioactivity of peptides.

•

Bioinformatics tools accelerate the obtaining of bioactive peptides.

•

The integrated approach is a promising strategy to obtain bioactive peptides.

The interest for food-derived bioactive peptides, either from common or unconventional sources, has increased due to their potential therapeutic effect against a wide range of diseases. The study of such bioactive peptides using conventional methods is a long journey, expensive and time-consuming. Hence, bioinformatic approaches, which can not only help to predict the formation of bioactive peptides from any known protein source, but also to analyze the protein structure/function relationship, have gained a new meaning in this scientific field. Therefore, this review aims to provides an overview of conventional characterization methods and the most recent advances in the field of in silico approaches for predicting and screening promising food-derived bioactive peptides.

Converting peptides into drugs targeting intracellular protein-protein interactions

Peptides are gaining increasing attention as therapeutics to target intracellular protein-protein interactions that are involved in disease progression. In this review, we discuss how peptides that are able to bind and inhibit a therapeutic target can be translated into drug leads. We discuss the advantages of using peptides as therapeutics to target intracellular protein-protein interactions, chemical strategies to generate macrocyclic peptides that are resistant to proteolytic enzymes, high-throughput screening approaches to identify peptides that have high affinity for therapeutic targets, strategies that permit these peptides to cross cell membranes and so reach intracellular targets, and the importance of investigating their mode-of-action in guiding the development of novel therapeutics.