Stimuli-Induced Architectural Transition as a Tool for Controlling the Enzymatic Degradability of Polymeric Micelles

End-Group Dye-Labeled Poly(hemiacetal ester) Block Copolymers: Enhancing Hydrolytic Stability and Loading Capacity for Micellar (Immuno-)Drug Delivery

Polymers with hemiacetal esters integrated in their backbone provide beneficial degradation profiles for (immuno-) drug delivery. However, their fast hydrolysis and low drug loading capacity have limited their applications so far. Therefore, this study focuses on the stability and loading capacity of hemiacetal ester polymers. The hydrophobicity of the micellar core has a tremendous effect on the hemiacetal ester stability. For that purpose, we introduce a new monomer with a phenyl moiety for stabilizing the micellar core and improving drug loading. The carrier functionality can further be expanded by post-polymerization modifications via activated ester groups at the polymer chain end. This allows for covalent dye labeling, which provides substantial insights into the polymers' in vitro performance. Flow cytometric analyses on RAW dual macrophages revealed intact micelles exhibiting significantly higher cellular uptake compared to degraded species, thus, highlighting the potential of end group functionalized poly(hemiacetal ester)s for (immuno)drug delivery purposes.

Hydrophobicity as a tool for programming sequential mesophase transitions of enzyme-responsive polymeric amphiphiles

The ability of polymeric assemblies to undergo programmable cascades of mesophase transitions is prevalent in many systems in nature, where structural and functional features are tightly bound to maximize activity. In this study, we have examined the ability to program the mesophase transition rates of co-assembled enzyme-responsive polymeric micelles, through fine adjustments of the hydrophobicity of their amphiphilic components. We have utilized the different reactivities of di- and tri-block amphiphiles toward enzymatic degradation as a tool for programming formulations to undergo sequential enzymatically induced transitions from micelles to hydrogels and finally to dissolved polymers. By varying the aliphatic end-groups of PEG-dendron di-block and tri-block amphiphiles, we could demonstrate the remarkable impact of minor modifications to the di-block amphiphiles' structure and hydrophobicity on the transition rates between the different mesophases, ranging from a few hours to a week. Additionally, the study reveals how altering the relative hydrophobicity of its amphiphilic components influences the formulation ratio and enzymatic selectivity, as well as the stability and degradation rate of the resulting hydrogels. The findings underscore the importance of molecular architecture and hydrophobicity as key parameters in the design of programmable enzyme-responsive polymeric assemblies, offering insights into the ability to precisely control multi-step mesophase transitions for tailored functionality.

pH-Responsive Block Copolymer Micelles of Temsirolimus: Preparation, Characterization and Antitumor Activity Evaluation

Purpose

Renal cell carcinoma (RCC) is the most common and lethal type of urogenital cancer, with one-third of new cases presenting as metastatic RCC (mRCC), which, being the seventh most common cancer in men and the ninth in women, poses a significant challenge. For patients with poor prognosis, temsirolimus (TEM) has been approved for first-line therapy, possessing pharmacodynamic activities that block cancer cell growth and inhibit proliferation-associated proteins. However, TEM suffers from poor water solubility, low bioavailability, and systemic side effects. This study aims to develop a novel drug formulation for the treatment of RCC.

Methods

In this study, amphiphilic block copolymer (poly(ethylene glycol) monomethyl ether-poly(beta-amino ester)) (mPEG-PBAE) was utilized as a drug delivery vehicle and TEM-loaded micelles were prepared by thin-film hydration method by loading TEM inside the nanoparticles. Then, the molecular weight of mPEG-PBAE was controlled to make it realize hydrophobic-hydrophilic transition in the corresponding pH range thereby constructing pH-responsive TEM-loaded micelles. Characterization of pH-responsive TEM-loaded nanomicelles particle size, potential and micromorphology while its determination of drug-loading properties, in vitro release properties. Finally, pharmacodynamics and hepatorenal toxicity were further evaluated.

Results

TEM loading in mPEG-PBAE increased the solubility of TEM in water from 2.6 μg/mL to more than 5 mg/mL. The pH-responsive TEM-loaded nanomicelles were in the form of spheres or spheroidal shapes with an average particle size of 43.83 nm and a Zeta potential of 1.79 mV. The entrapment efficiency (EE) of pH-responsive TEM nanomicelles with 12.5% drug loading reached 95.27%. Under the environment of pH 6.7, the TEM was released rapidly within 12 h, and the release rate could reach 73.12% with significant pH-dependent characteristics. In vitro experiments showed that mPEG-PBAE preparation of TEM-loaded micelles had non-hemolytic properties and had significant inhibitory effects on cancer cells. In vivo experiments demonstrated that pH-responsive TEM-loaded micelles had excellent antitumor effects with significantly reduced liver and kidney toxicity.

Conclusion

In conclusion, we successfully prepared pH-responsive TEM-loaded micelles. The results showed that pH-responsive TEM-loaded micelles can achieve passive tumor targeting of TEM, and take advantage of the acidic conditions in tumor tissues to achieve rapid drug release.

Functionalized Polymeric Micelles for Targeted Cancer Therapy: Steps from Conceptualization to Clinical Trials

Cancer is still ranked among the top three causes of death in the 30- to 69-year-old age group in most countries and carries considerable societal and macroeconomic costs that differ depending on the cancer type, geography, and patient gender. Despite advances in several pharmacological approaches, the lack of stability and specificity, dose-related toxicity, and limited bioavailability of chemotherapy (standard therapy) pose major obstacles in cancer treatment, with multidrug resistance being a driving factor in chemotherapy failure. The past three decades have been the stage for intense research activity on the topic of nanomedicine, which has resulted in many nanotherapeutics with reduced toxicity, increased bioavailability, and improved pharmacokinetics and therapeutic efficacy employing smart drug delivery systems (SDDSs). Polymeric micelles (PMs) have become an auspicious DDS for medicinal compounds, being used to encapsulate hydrophobic drugs that also exhibit substantial toxicity. Through preclinical animal testing, PMs improved pharmacokinetic profiles and increased efficacy, resulting in a higher safety profile for therapeutic drugs. This review focuses on PMs that are already in clinical trials, traveling the pathways from preclinical to clinical studies until introduction to the market.

Hydrogel Microneedles with Programmed Mesophase Transitions for Controlled Drug Delivery

Microneedle-based drug delivery offers an attractive and minimally invasive administration route to deliver therapeutic agents through the skin by bypassing the stratum corneum, the main skin barrier. Recently, hydrogel-based microneedles have gained prominence for their exceptional ability to precisely control the release of their drug cargo. In this study, we investigated the feasibility of fabricating microneedles from triblock amphiphiles with linear poly(ethylene glycol) (PEG) as the hydrophilic middle block and two dendritic side-blocks with enzyme-cleavable hydrophobic end-groups. Due to the poor formation and brittleness of microneedles made from the neat amphiphile, we added a sodium alginate base layer and tested different polymeric excipients to enhance the mechanical strength of the microneedles. Following optimization, microneedles based on triblock amphiphiles were successfully fabricated and exhibited favorable insertion efficiency and low height reduction percentage when tested in Parafilm as a skin-simulant model. When tested against static forces ranging from 50 to 1000 g (4.9-98 mN/needle), the microneedles showed adequate mechanical strength with no fractures or broken segments. In buffer solution, the solid microneedles swelled into a hydrogel within about 30 s, followed by their rapid disintegration into small hydrogel particles. These hydrogel particles could undergo slow enzymatic degradation to soluble polymers. In vitro release study of dexamethasone (DEX), as a steroid model drug, showed first-order drug release, with 90% released within 6 days. Eventually, DEX-loaded MNs were subjected to an insertion test using chicken skin and showed full penetration. This study demonstrates the feasibility of programming hydrogel-forming microneedles to undergo several mesophase transitions and their potential application as a delivery system for self-administration, increased patient compliance, improved efficacy, and sustained drug release.

Preparation of reversible cross-linked amphiphilic polymeric micelles with pH-responsive behavior for smart drug delivery

A new type of reversible cross-linked and pH-responsive polymeric micelle (PM), poly[polyethylene glycol methacrylate-co-2-(acetoacetoxy)ethyl methacrylate]-b-poly [2-(dimethylamino)ethyl methacrylate] [P(PEGMA-co-AEMA)-b-PDMAEMA], was synthesized for targeted delivery of curcumin. After reversible cross-linking of the micellar shell, the PMs with a typical core-shell structure exhibited excellent stability against extensive dilution and good reversibility of pH-responsiveness in solutions with different pH values. P(PEGMA9-co-AEMA6)-b-PDMAEMA10 has the lowest critical micelle concentration (CMC) value (0.0041 mg mL-1), the highest loading capacity (13.86%) and entrapment efficiency (97.03%). A slow sustained drug release at pH 7.4 with 12.36% in 108 h, while a fast release (42.36%) was observed at pH 5.0. Furthermore, a dissipative particle dynamics (DPD) simulation method was employed to investigate the self-assembly process and pH-responsive behavior of PMs. The optimal drug-carrier ratio (2%) and fraction of water (92%) were confirmed by analyzing the drug distribution and morphology of micelles during the self-assembly process of the block copolymer. The simulation results were consistent with experimental results, indicating DPD simulation shows potential to study the structure properties of reversible cross-linked micelles. The present findings provide a new method for the development of SDDS with good structural stability and controlled drug release properties.