Electrochemiluminescence Biosensor for Nucleolin Imaging in a Single Tumor Cell Combined with Synergetic Therapy of Tumor

An ultrasensitive paper-based SERS sensor for detection of nucleolin using silver-nanostars, plastic antibodies and natural antibodies

A state-of-the-art, ultrasensitive, paper-based SERS sensor has been developed using silver nanostars (AgNSs) in combination with synthetic and natural antibodies. A key component of this innovative sensor is the plastic antibody, which was synthesized using molecularly imprinted polymer (MIP) technology. This ground-breaking combination of paper substrates/MIPs with AgNSs, which is similar to a sandwich immunoassay, is used for the first time with the aim of SERS detection and specifically targets nucleolin (NCL), a cancer biomarker. The sensor device was carefully fabricated by synthesizing a polyacrylamide-based MIP on cellulose paper (Whatman Grade 1 filter) by photopolymerization. The binding of NCL to the MIP was then confirmed by natural antibody binding using a sandwich assay for quantitative SERS analysis. To facilitate the detection of NCL, antibodies were pre-bound to AgNSs with a Raman tag so that the SERS signal could indicate the presence of NCL. The composition of the sensory layers/materials was meticulously optimized. The intensity of the Raman signal at ∼1078 cm-1 showed a linear trend that correlated with increasing concentrations of NCL, ranging from 0.1 to 1000 nmol L-1, with a limit of detection down to 0.068 nmol L-1 in human serum. The selectivity of the sensor was confirmed by testing its analytical response in the presence of cystatin C and lysozyme. The paper-based SERS detection system for NCL is characterized by its simplicity, sustainability, high sensitivity and stability and thus embodies essential properties for point-of-care applications. This approach is promising for expansion to other biomarkers in various fields, depending on the availability of synthetic and natural antibodies.

Ratiometric electrogenerated chemiluminescence sensing microRNA based on electrochemically controlled release of lucigenin from silica/chitosan/lucigenin nanoparticles

The dye-doped silica nanoparticles-based electrogenerated chemiluminescence (ECL) has been widely explored for analytical purposes due to its high sensitivity, simplicity and wide dynamic concentration range. However, only a few of dye molecules located at the near surface of nanoparticles can participate in the ECL reaction due to the poor conductivity of silica nano-matrix. In addition, the ECL signal is easy to be affected by environmental interference, which results in poor accuracy. Herein, a ratiometric ECL sensing method is established based on the electrochemically controlled release of lucigenin molecules from silica/chitosan/lucigenin composite nanoparticles (Lu/CS NPs) with the aid of sulfide ions. Firstly, H+ produced from the electrochemical oxidation of HS- ions can combine with SiO- and displace lucigenin from Lu/CS NPs. The released lucigenin molecules react with the reactive oxygen species (ROS) generated from the electroreduction of dissolved oxygen to produce the cathodic ECL signal. In addition, the excited elemental sulfur from the electrooxidation of HS- ions transfers its energy to lucigenin molecules and makes them be excited to produce energy-transfer anodic ECL signal. Based on these findings, a ratiometric ECL sensor is developed taking the anodic ECL intensity of lucigenin as a reference signal for the cathodic ECL of lucigenin. The proposed ratiometric ECL sensor has been successfully applied to the detection of let-7a with a wide linear range of 0.1-9.0 pM, a low detection limit of 28 fM, high selectivity and good reproducibility. Moreover, the developed approach was used to detect let-7a in human serum composite samples with good recoveries.

Application and outlook of electrochemical technology in single-cell analysis

Cellular heterogeneity, especially in some important diseased cells like tumor cells, acts as an invisible driver for disease development like cancer progression in the tumor ecosystem, contributing to differences in the macroscopic and microscopic detection of disease lesions like tumors. Traditional analysis techniques choose group information masked by the mean as the analysis sample, making it difficult to achieve precise diagnosis and target treatment, on which could be shed light via the single-cell level determination/bioanalysis. Hence, in this article we have reviewed the special characteristic differences among various kinds of typical single-cell bioanalysis strategies and electrochemical techniques, and then focused on the recent advance and special bio-applications of electrochemiluminescence and micro-nano electrochemical sensing mediated in single-cell bioimaging & bioanalysis. Especially, we have summarized the relevant research exploration of the possibility to establish the in-situ single-cell electrochemical methods to detect cell heterogeneity through determination of specific biomolecules and bioimaging of some important biological processes. Eventually, this review has explored some important advances of electrochemical single-cell detection techniques for the real-time cellular bioimaging and diagnostics of some disease lesions like tumors. It raises the possibility to provide the specific in-situ platform to exploit the versatile, sensitive, and high-resolution electrochemical single-cell analysis for the promising biomedical applications like rapid tracing of some disease lesions or in vivo bioimaging for precise cancer theranostics.

Smart Ratiometric SERS Nanoprobe for Real-Time Monitoring Hydrogen Peroxide in Living Cells during NADH Treatment Associated with Ferroptosis

Studying the oxidative stress, especially the reactive oxygen species (ROS) response of ferroptosis, is crucial for the diagnosis and treatment of cancer based on ferroptosis. However, reliable quantitative analysis of intracellular ROS in cancer treatment for drug screening is still a challenge. Herein, a superior ratiometric SERS nanoprobe was developed for in situ, real-time, and highly sensitive detection of content variation of H2O2 within living cells. The SERS nanoprobe was prepared by coassembly of the internal standard molecule p-mercaptobenzonitrile and the reporter molecule p-mercaptophenylboronic acid on the surface of gold nanoparticles, used for synergistic calibration and detection of H2O2, which enables reliable detection of the true content of intracellular H2O2 without the interference of other substances in cells. Based on the nanoprobe, we found that the level of intracellular H2O2 of cancer cells was increased after the nicotinamide adenine dinucleotide (NADH) treatment, with a dose-dependence to the concentration of NADH. High doses of NADH (above 20 mM) can induce cell death by means of ferroptosis associated with the level elevation of intracellular lipid hydroperoxides. This study highlights the potential of the SERS nanoprobe for tracking content variation of cellular H2O2 and understanding its roles in screening new anticancer drugs.

Single-Atom Nanoenzyme-Based Autoluminescence System for Cancer Cell Imaging and Mitochondrial-Targeted Therapy

The autoluminescence nanoplatform based on a single-atom catalyst has the potential to achieve accurate tumor diagnosis and treatment. Taking advantage of this, glycyrrhetinic acid (GA) and chitosan-modified single Fe-N-C atom catalysts (SAF NPs) loaded with luminol-curcumin (Cur) were fabricated (SAF-LCCG). Once delivered to the tumor, this autoluminescence SAF-LCCG could target the mitochondria to restrain tumor metastasis and promote the production of hydrogen peroxide (H2O2). Then, SAF NPs with Fenton-like properties could actively utilize intracellular H2O2 to produce ·OH for chemodynamic therapy. After that, excess ·OH and H2O2 were transmitted to luminol to emit blue-violet chemiluminescence (CL) for cancer cell imaging. Synchronously, light was transferred to Cur to produce reactive oxygen species (ROS) which realized photodynamic therapy. Besides, Cur could be served as a chemotherapeutic drug to enhance intracellular ROS for penetrating therapy. More importantly, the massive accumulation of ROS in cancer cells can promote the CL intensity of luminol, which realized the cyclic ROS amplification. This autoluminescence nanoplatform was developed for accurate cancer cell imaging, effective inhibition of tumor metastasis, and synergistic and penetrated treatment of tumors.

A Flexible and Transparent PtNP/SWCNT/PET Electrochemical Sensor for Nonenzymatic Detection of Hydrogen Peroxide Released from Living Cells with Real-Time Monitoring Capability

We developed a transparent and flexible electrochemical sensor using a platform based on a network of single-walled carbon nanotubes (SWCNTs) for the non-enzymatic detection of hydrogen peroxide (H₂O₂) released from living cells. We decorated the SWCNT network on a poly(ethylene terephthalate) (PET) substrate with platinum nanoparticles (PtNPs) using a potentiodynamic method. The PtNP/SWCNT/PET sensor synergized the advantages of a flexible PET substrate, a conducting SWCNT network, and a catalytic PtNP and demonstrated good biocompatibility and flexibility, enabling cell adhesion. The PtNP/SWCNT/PET-based sensor demonstrated enhanced electrocatalytic activity towards H₂O₂, as well as excellent selectivity, stability, and reproducibility. The sensor exhibited a wide dynamic range of 500 nM to 1 M, with a low detection limit of 228 nM. Furthermore, the PtNP/SWCNT/PET sensor remained operationally stable, even after bending at various angles (15°, 30°, 60°, and 90°), with no noticeable loss of current signal. These outstanding characteristics enabled the PtNP/SWCNT/PET sensor to be practically applied for the direct culture of HeLa cells and the real-time monitoring of H₂O₂ release by the HeLa cells under drug stimulation.

Atomic layer deposition (ALD)-constructed TaS2nanoflakes for cancer-related nucleolin detection

Sensitive detection of nucleolin (NCL) is of great significance for the early diagnosis of cancer. In this work, as a new type of two-dimensional (2D) transition metal dichalcogenides (TMDCs), TaS₂nanoflakes (NFs) were precisely constructed by atomic layer deposition (ALD) on carbon fiber paper (CFP) with high specific surface area.In situobservation showed that the nucleation and growth of TaS₂nanoflakes were precisely controlled by the number of ALD cycles, thereby regulating their electrochemical properties. The electrochemical performance of TaS₂NFs was observed in depth, and compared with that of traditional 2D TMDCs. Due to the high surface area and conductivity, anodic/cathodic current of ∼1570μA of TaS₂NFs/CFP can be obtained. Subsequently, an electrochemical biosensor based on ALD-constructed TaS₂NFs/CFP for cancer-related NCL detection was fabricated. Due to the excellent electrochemical performance of TaS₂NFs/CFP, ultrasensitive detection of NCL in the linear range of 0.1 pM-10 nM with a detection limit of 0.034 pM was achieved.

Cathodic Electrochemiluminesence Microscopy for Imaging of Single Carbon Nanotube and Nucleolin at Single Tumor Cell

Cathodic electrochemiluminesence (ECL) microscopy based on luminol analog L012 was originally established to implement the imaging of a single nanotube and nucleolin on a single tumor cell. This microscopy utilizes multiwalled carbon nanotubes (MWCNTs) as advanced coreactant accelerators to efficiently convert dissolved oxygen (O₂) and H₂O₂ into reactive oxygen species (ROS) due to excellent electrocatalytic properties. The produced ROS could oxide L012 into an excited state of L012 leading to a bright cathodic ECL illumination, thereby promoting ECL imaging of MWCNTs at a low triggering potential. After being modified with AS1411 aptamers, MWCNTs@AS1411 probes were incubated with tumor cells for specific ECL imaging of nucleolin on the plasma membrane, which permits cathodic ECL microscopy for label-free bioassays without ECL tags. The L012-based cathodic ECL microscopy with a moderate operating potential and label-free characteristics provides a universal approach in single nanomaterial and single-cell imaging and analyses.

One-step fabrication of COF-coated melamine sponge for in-syringe solid-phase extraction of active ingredients from traditional Chinese medicine in serum samples

In this study, a covalent organic framework (COF)-TpBD-supported melamine sponge (MS) was fabricated through a one-step hydrothermal method. The obtained monolithic column was then applied in in-syringe solid-phase extraction (IS-SPE) for the separation of three volatile ingredients from serum samples. Given credit for the superior adsorption capacity of the COF and the homogeneous microporous property of MS, the developed column exhibited satisfactory separation of the targets. And the dominating adsorption mechanism was the hydrophobic interaction forces between TpBD and targets and the high mass transfer efficiency provided by the large pore structure of MS. The results of dynamic adsorption showed that the MS@TpBD column displayed much better adsorption performance than blank MS and TpBD. And it has featured great reusability up to 5 cycles and obtained satisfied recovery values (87.9 ~ 110.3%) in serum samples. As a result of sample clean-up, this column offers low limit of detections (LODs) down to 0.014, 0.010, and 0.020 μg/mL, respectively. In summary, we believe that this convenient separation column has prominent application promise in the fields of separating activity ingredients in biological samples.

Recent Advances in Single Cell Analysis by Electrochemiluminescence

Understanding biological mechanisms operating in cells is one of the major goals of biology. Since heterogeneity is the fundamental property of cellular systems, single cell measurements can provide more accurate information about the composition, dynamics, and regulatory circuits of cells than population-averaged assays. Electrochemiluminescence (ECL), the light emission triggered by electrochemical reactions, is an emerging approach for single cell analysis. Numerous analytes, ranging from small biomolecules such as glucose and cholesterol, proteins and nucleic acids to subcellular structures, have been determined in single cells by ECL, which yields new insights into cellular functions. This review aims to provide an overview of research progress on ECL principles and systems for single cell analysis in recent years. The ECL reaction mechanisms are briefly introduced, and then the advances and representative works in ECL single cell analysis are summarized. Finally, outlooks and challenges in this field are addressed.

Gold nanoparticle-based signal amplified electrochemiluminescence for biosensing applications

Since the content levels of biomarkers at the early stage of many diseases are generally lower than the detection threshold concentration, achieving ultrasensitive and accurate detection of these biomarkers is still one of the major goals in bio-analysis. To achieve ultrasensitive and reliable bioassay, it requires developing highly sensitive biosensors. Among all kinds of biosensors, electrogenerated chemiluminescence (ECL) based biosensors have attracted enormous attention due to their excellent properties. In order to improve the performance of ECL biosensors, gold nanoparticles (Au NPs) have been widely utilized as signal amplification tags. The introduction of Au NPs could dramatically enhance the performance of the constructed ECL biosensors via diverse ways such as electrode modification material, efficient energy acceptor in ECL resonant energy transfer (ECL-RET), reaction catalyst, surface plasmon resonance (SPR) enhancer, and as nanocarrier. Herein, we summarize recent developments and progress of ECL biosensors based on Au NPs signal amplification strategies. We will cover ECL applications of Au NPs as a signal amplification tag in the detection of proteins, metal ions, nucleic acids, small molecules, living cells, exosomes, and cell imaging. Finally, brief summary and future outlooks of this field will be presented.

Electrochemiluminescence biosensor for thrombin detection based on metal organic framework with electrochemiluminescence indicator embedded in the framework

Ru(dcbpy)₃²⁺-polyethyleneimine-L-lysine (Ru-PEI-L-lys) had been immobilized on metal organic frameworks (ZIF-8) to form an electrochemiluminescent(ECL) indicator (Ru-PEI-L-lys-ZIF-8). In this ECL indicator, PEI-L-lys is used as a co-reactant. Platinum nanoparticles (PtNPs) has been mixed with Ru-PEI-L-lys-ZIF-8 to form a thin film to increase the electron transfer rate and enhanced the ECL response of the system. The prepared material had been characterized carefully and been combined with high selectivity of aptamer to develop a ECL biosensor for thrombin detection. RecJ_f exonuclease (an ssDNA specific exonuclease) assistant target recycling amplification has been adopted to enhance the sensitivity of the system. The ECL response of the system has a linear relationship with logarithm of thrombin concentration in the range of 1 fM to 10 pM with a detection limit of 0.02 aM. This work not only provides a new strategy for the design and synthesis of high performance and stable ECL indicator, but also opens up a new approach for the development of highly sensitive ECL sensors for biological analysis.

An intermolecular hydrogen-bond-induced quench-type Ru(dcbpy)32+/TPA electrochemiluminescence system by nitrogen-doped carbon quantum dots

Here, we show that nitrogen-doped carbon quantum dots (NCQDs) strongly inhibits the anodic electrochemiluminescence (ECL) signal of a tris(4,4'-dicarboxylic acid-2,2'-bipyridyl) ruthenium(II) (Ru(dcbpy)₃²⁺)/tripropylamine (TPA) aqueous system. To determine the ECL-quenching mechanism, we used photoluminescence spectroscopy, UV-Visible absorption spectroscopy and dynamic simulation technology. Quenching of the ECL signal of Ru(dcbpy)₃²⁺/TPA by NCQDs was predominantly attributed to the interaction between Ru(dcbpy)₃²⁺ and NCQDs rather than that between TPA and NCQDs. Specifically, when Ru(dcbpy)₃²⁺ and NCQDs were in aqueous solution together, the carboxyl (-COOH) groups of Ru(dcbpy)₃²⁺ were in contact with oxygen- and nitrogen-containing groups on the surface of NCQDs and formed intermolecular hydrogen bonds. This process involved energy transfer from the excited-state Ru(dcbpy)₃²⁺ to the intermolecular hydrogen bonds, thus resulting in a decrease in the Ru(dcbpy)₃²⁺ ECL signal. On this basis, a quenching-type ECL sensor for the quantification of NCQDs was fabricated. The sensor had a wide linear range and an estimated detection limit of 0.0012 mg mL^-1, as well as excellent stability and selectivity. Satisfactory recoveries of 97.0-99.5% were obtained using the ECL sensor to quantify NCQDs in tap water. NCQDs could potentially be used as a quenching probe of Ru(dcbpy)₃²⁺ to construct various biosensors with widespread applications in the sensing field.

Stretchable and Transparent Electrochemical Sensor Based on Nanostructured Au on Carbon Nanotube Networks for Real-Time Analysis of H2O2 Release from Cells

Various electrochemical biosensors have been developed for direct and real-time recording of biomolecules released from living cells. However, since these traditional electrodes are commonly rigid and nonflexible, in situ monitoring of biochemical signals while cell deformation occurs remains a great challenge. Herein, we report a facile approach for the development of a stretchable and transparent electrochemical cell-sensing platform based on Au nanostructures (nano-Au) and carbon nanotube (CNT) films embedded in PDMS (nano-Au/CNTs/PDMS). The sandwich-like nanostructured network of nano-Au/CNTs endows the sensor with excellent mechanical stability and electrochemical performance. The obtained nano-Au/CNTs/PDMS electrode displays desired performance for H₂O₂ detection with a wide linear range (20 nM-25.8 μM) and low detection limit (8 nM). Owing to good biocompatibility and flexibility, HeLa and human umbilical vein endothelial cells can be directly cultured on the electrode and real-time monitoring of H₂O₂ release from cells under their stretched state was realized. The proposed strategy demonstrated in this work provides an effective way for design of stretchable sensors and more opportunities for sensing biomolecules from mechanically sensitive cells.

Spatially-resolved dual-potential sandwich electrochemiluminescence immunosensor for the simultaneous determination of carbohydrate antigen 19-9 and carbohydrate antigen 24-2

A new electrochemiluminescence (ECL) immunosensor based on spatially-resolved dual-potential technology was designed for the simultaneous determination of carbohydrate antigen 19-9 (CA 19-9) and carbohydrate antigen 24-2 (CA 242). Luminol-AgNPs@ZIF-67 was used as the anodic probe, and Pt nanoparticle-functionalized graphitic carbon nitride nanosheets (g-C₃N₄@PtNPs) were used as the cathodic probe. Two spatially-resolved areas on the dual-disk glassy carbon electrode (DDGCE) were modified with a AuNPs film by electrodeposition to improve the conductivity of the sensing interface. By recording the ECL responses at two different excitation potentials, the linear range for CA 19-9 was determined to be 0.0001-10 U/mL, with a limit of detection of 31 μU/mL. The linear range for CA 242 was 0.0005-10 U/mL, with a limit of detection of 0.16 mU/mL. Moreover, the ECL immunosensor possessed high selectivity and stability and successfully detected CA 19-9 and CA 242 in real samples. This immunosensor provides a new platform for clinical immunoassays.

Bio-multifunctional noncovalent porphyrin functionalized carbon-based nanocomposite

Herein, in a one-pot method, the reduced graphene oxide layers with the assistance of multiwalled carbon nanotubes were decorated to provide a suitable space for the in situ growth of CoNi₂S₄, and the porphyrins were incorporated into the layers as well to increase the sensitivity of the prepared nanostructure. The prepared nanocomposite can establish π-π interactions between the genetic material and on the surface of porphyrin rings. Also, hydrogen bonds between genetic domains and the porphyrin' nitrogen and the surface hydroxyl groups are probable. Furthermore, the potential donor-acceptor relationship between the d⁷ transition metal, cobalt, and the genetic material provides a suitable way to increase the interaction and gene loading , and transfections. The reason for this phenomenon was optimized to increase the EGFP by up to 17.9%. Furthermore, the sensing ability of the nanocomposite towards H₂O₂ was investigated. In this regard, the limit of detection of the H₂O₂ obtained 10 µM. Also, the in situ biosensing ability in the HEK-293 and PC12 cell lines was evaluated by the addition of PMA. The nanocomposite showed the ability to detect the released H₂O₂ after adding the minimum amount of 120 ng/mL of the PMA.

A ratiometric electrochemiluminescent cytosensor based on polyaniline hydrogel electrodes in spatially separated electrochemiluminescent systems

Here, we proposed a ratiometric electrochemiluminescent (ECL) strategy in spatially multiplied ECL systems. By the specific recognition of hyaluronic acid with proteoglycan CD44 and epidermal growth factor with epidermal growth factor receptor on the cell surface, the cells were labelled with potential-resolved ECL probes, namely Ru(bpy)₃²⁺ and g-C₃N₄, respectively. The as-proposed cytosensor provides a multichannel ECL protocol to improve the throughput, which may push the application of ECL for the cellular immunoanalysis.

A potential-resolved electrochemiluminescence resonance energy transfer strategy for the simultaneous detection of neuron-specific enolase and the cytokeratin 19 fragment

An electrochemiluminescence resonance energy transfer (ECL-RET) immunosensor was developed based on the potential-resolved technology for the simultaneous detection of neuron-specific enolase (NSE) and the cytokeratin 19 fragment (CYFRA21-1). The absorption spectrum of gold nanorods (AuNRs) perfectly overlapped with the ECL spectra of SnS2@Pt and Ru(bpy)32+/Zn-MOF, so they exhibited an excellent ECL-RET effect with high efficiency. Zn-MOF possesses a large surface area, which allows for the loading of Ru(bpy)32+. This results in a signal probe of Ru(bpy)32+/Zn-MOF/Ab1 showing a strong ECL emission. Simultaneously, owing to the excellent electronic conductivity of PtNPs, they can increase the electron transfer rate between S2O82- and tin disulfide nanoflowers (SnS2NFs). Hence, the ECL signal of SnS2NFs can be enhanced. Under the optimal conditions, the linear range for NSE is 0.2 pg mL-1-20 ng mL-1 with a detection limit of 79 fg mL-1. The linear range for CYFRA21-1 is 1.25 pg mL-1-12.5 ng mL-1 with a detection limit of 0.43 pg mL-1. The proposed immunosensor can be used for the sensitive simultaneous detection of NSE and CYFRA21-1 in human serum and has promise for clinical diagnostics.

Recent Progress of Novel Electrochemiluminescence Nanoprobes and Their Analytical Applications

High-performance nanomaterials have been seen as a new generation of electrochemiluminescence (ECL) probes or emitters for their finely tunable structure and concomitant remarkable properties, guaranteeing the prospective applications in the analysis and diagnosis devices with superior performances. The structure-activity relationships of ECL nanoprobes in nanoscale are presenting milestone in understanding of the ECL microscopic behaviors and mechanisms, and guide the exploitation of novel ECL probes. In this mini-review, we summarized the recent development of novel ECL probes based on the nanomaterials. The mechanism and relationships between their structure as well as the active sites and functionality were revealed. In addition, the design and regulation of the ECL nanoprobes were emphasized for the biosensing and imaging application. Finally, the potential prospect of the ECL nanoprobes, design, and their applications were discussed.

Electrochemiluminescence Biosensors Using Screen-Printed Electrodes

Electrogenerated chemiluminescence (also called electrochemiluminescence (ECL)) has become a great focus of attention in different fields of analysis, mainly as a consequence of the potential remarkably high sensitivity and wide dynamic range. In the particular case of sensing applications, ECL biosensor unites the benefits of the high selectivity of biological recognition elements and the high sensitivity of ECL analysis methods. Hence, it is a powerful analytical device for sensitive detection of different analytes of interest in medical prognosis and diagnosis, food control and environment. These wide range of applications are increased by the introduction of screen-printed electrodes (SPEs). Disposable SPE-based biosensors cover the need to perform in-situ measurements with portable devices quickly and accurately. In this review, we sum up the latest biosensing applications and current progress on ECL bioanalysis combined with disposable SPEs in the field of bio affinity ECL sensors including immunosensors, DNA analysis and catalytic ECL sensors. Furthermore, the integration of nanomaterials with particular physical and chemical properties in the ECL biosensing systems has improved tremendously their sensitivity and overall performance, being one of the most appropriates research fields for the development of highly sensitive ECL biosensor devices.