Dual-Purpose SERS Sensor for Selective Determination of Polycyclic Aromatic Compounds via Electron Donor-Acceptor Traps

Graphene Oxide/Zinc Phthalocyanine Selective Singlet Oxygen Visible-Light Nanosensor for Raman-Inactive Compounds

A novel phthalocyanine-based hybrid nanofilm is for the first time successfully applied as an oxidative platform for surface enhanced Raman spectroscopy (SERS) sensing to fine-resolve Raman-inactive compounds. The hybrid is formed by self-assembly of zinc(II) 2,3,9,10,16,17,23,24-Octa[(3',5'-dicarboxy)-phenoxy]phthalocyaninate (ZnPc*) with the solid-supported monolayer of graphene oxide (GO) mediated by zinc acetate metal cluster. Atomic force microscopy, UV-vis and fluorescence spectroscopies confirm that this simple coordination motive in combination with molecular structure of ZnPc* prevents contact quenching of the light-excited triplet state through aromatic stacking with GO particles. Fluorescence probing with Sensor Green and terephthalic acid as specific indicators of active oxygen intermediates shows that the hybrid nanofilm initiates selective singlet oxygen generation under visible light. Direct one-electron oxidation of tetramethylbenzidine (TMB) (1.0×10-7 m) on the hybrid surface in the presence of 100 nm silver nanoparticles as plasmonic hot-spots under 450-640-nm light irradiation yields well-resolved resonance Raman spectrum of the oxidized form TMB+1. Using these hybrid nanofilms as visible light platforms for redox reaction of target analytes without additional oxidizing agents, the range of Raman-detectable compounds can be significantly expanded through a rapid ultrasensitive SERS screening of substances currently considered Raman-inactive.

Bimetallic AuNR@AgNCs for ultrasensitive surface-enhanced Raman scattering sensing of dithianon in apple juice

In this study, a bimetallic surfaced-enhanced Raman spectroscopy (SERS)-active substrate consisting of AuNR@AgNCs was proposed for the rapid detection of dithianon. Due to the significant synergistic enhancement of the core-shell nanocuboids, the obtained AuNR@AgNC substrate exhibited excellent SERS performance. The simulation findings supported the practical SERS results and demonstrated that interactions were mainly maintained by the nitrile functional group. The AuNR@AgNCs could be used to detect dithianon with an LOD value of 20 nM. Moreover, dithianon in river water and apple juice could be detected with recovery in the satisfactory ranges of 97.41%-98.35% and 97.77%-98.70%, respectively, by using this substrate under optimal conditions, indicating that the AuNR@AgNC substrate could serve as an excellent SERS detection platform for pesticide residues in fruit.

Selective surface enhanced Raman detection and effective photocatalytic degradation of sulfonamides antibiotic based on a flexible three-dimensional chitosan/carbon nitride/silver substrate

The prevalence of sulfonamide residues in aquatic environments poses serious environmental risks, and the sensitive detection and effective degradation of sulfonamides have attracted widespread attention. Here, the environmentally friendly chitosan (CS)/carbon nitride (CN) with three-dimensional porous structure is fabricated by freeze-drying method, and subsequently a new bifunctional flexible substrate (CS/CN/Ag) is prepared by anchoring of small sized AgNPs (6 ∼ 12 nm) on CS/CN. Importantly, the CS/CN/Ag substrate shows high adsorption capacity (∼ 83.06%) for sulfamethoxazole (SMX) solution within 20 mins and the limit of detection can be as low as 7.46 × 10-9 mol·L-1 with an enhancement factor of 3.3 × 105. Also, the CS/CN/Ag substrate displays highly selective for surface-enhanced Raman spectroscopy (SERS) detection of sulfonamides and also shows excellent SERS response for SMX in hospital wastewater samples. In addition, the photocatalytic degradation efficiency of SMX could reach as high as 99.22% within 20 mins of irradiation and the CS/CN/Ag still maintains outstanding photocatalytic performance after six cycles. Moreover, the Ag content in the CS/CN/Ag substrate is only 2.35%, and also the CS/CN/Ag exhibits good uniformity, repeatability, recyclability and stability. Therefore, this flexible and cost-effectively substrate of CS/CN/Ag shows great potential for the simultaneous SERS detection and photocatalytic degradation of pollutants in actual wastewater samples.

SERS with Flexible β-CD@AuNP/PTFE Substrates for In Situ Detection and Identification of PAH Residues on Fruit and Vegetable Surfaces Combined with Lightweight Network

The detection of polycyclic aromatic hydrocarbons (PAHs) on fruit and vegetable surfaces is important for protecting human health and ensuring food safety. In this study, a method for the in situ detection and identification of PAH residues on fruit and vegetable surfaces was developed using surface-enhanced Raman spectroscopy (SERS) based on a flexible substrate and lightweight deep learning network. The flexible SERS substrate was fabricated by assembling β-cyclodextrin-modified gold nanoparticles (β-CD@AuNPs) on polytetrafluoroethylene (PTFE) film coated with perfluorinated liquid (β-CD@AuNP/PTFE). The concentrations of benzo(a)pyrene (BaP), naphthalene (Nap), and pyrene (Pyr) residues on fruit and vegetable surfaces could be detected at 0.25, 0.5, and 0.25 μg/cm2, respectively, and all the relative standard deviations (RSD) were less than 10%, indicating that the β-CD@AuNP/PTFE exhibited high sensitivity and stability. The lightweight network was then used to construct a classification model for identifying various PAH residues. ShuffleNet obtained the best results with accuracies of 100%, 96.61%, and 97.63% for the training, validation, and prediction datasets, respectively. The proposed method realised the in situ detection and identification of various PAH residues on fruit and vegetables with simplicity, celerity, and sensitivity, demonstrating great potential for the rapid, nondestructive analysis of surface contaminant residues in the food-safety field.

Detection of 1-OHPyr in human urine using SERS with injection under wet liquid-liquid self-assembled films of β-CD-coated gold nanoparticles and deep learning

1-Hydroxypyrene (1-OHPyr), a typical hydroxylated polycyclic aromatic hydrocarbon (OH-PAH), has been commonly regarded as a urinary biomarker for assessing human exposure and health risks of PAHs. Herein, a fast and sensitive method was developed for the determination of 1-OHPyr in urine using surface-enhanced Raman spectroscopy (SERS) combined with deep learning (DL). After emulsification, urinary 1-OHPyr was separated using simple liquid-liquid extraction. Gold nanoparticles with β-cyclodextrin (β-CD@AuNPs) were synthesized, and homogeneous and ordered β-CD@AuNP films were prepared through a liquid-liquid interface self-assembly process. The separated 1-OHPyr was injected under wet assembled films for SERS detection. Concentration as low as 0.05 μg mL^-1 of 1-OHPyr in urine could still be detected, and the relative standard deviation was 5.5 %, and this was ascribed to the adsorption of β-CD and the high-probability contact between 1-OHPyr molecules and the nanogap of assembled films under the action of capillary force. Meanwhile, a convolutional neural network (CNN), a classical DL network architecture, was adopted to build the prediction model, and the model was further simplified by genetic algorithm (GA). CNN combined with a GA obtained optimized results with determination coefficient and a root mean square error of prediction sets of 0.9639 and 0.6327, respectively, outperforming other models. Overall, the proposed method achieves fast and accurate detection of 1-OHPyr in urine, improves the assessment human exposure to PAHs and is expected to have applications in the analysis of other OH-PAHs in complex environments.

A sensitive surface-enhanced resonance Raman scattering sensor with bifunctional negatively charged gold nanoparticles for the determination of Cr(VI)

Hexavalent chromium (Cr(VI)) pollution in the water system has seriously endangered human health and the environment. Herein, we propose a rapid, simple and sensitive surface-enhanced resonance Raman scattering (SERRS) sensor with the bifunctional negatively charged gold nanoparticles ((-)AuNPs) which employ as not only the oxidoreductase-like nanozyme but also the substrate to determine Cr(VI). (-)AuNPs effectively promoted the conversion of 3,3',5,5'-tetramethylbenzidine (TMB) into the blue product of 3,3',5,5'-tetramethylbenzidine diamine (oxTMB) in the presence of Cr(VI) and generated a strong SERRS signal at 1611 cm^-1. According to this principle, the Raman intensity difference at 1611 cm^-1 exhibited a satisfactory linear relationship with the logarithm of the Cr(VI) concentration from 10^-5 to 10^-9 M with a low limit of detection (LOD) of 0.4 nM. In addition, the possible SERRS enhancement mechanism, selectivity and reproducibility were also investigated. What's more, the SERRS platform was successfully applied in the complicated water samples, which was anticipated to become a promising analytical method for monitoring of Cr(VI) in the environment.

Synergistic double laser beam-boosted liquid-NIR-SERS for ultralow detection of non-adsorptive polycyclic aromatic hydrocarbons in lake water

Ultrasensitive trace-detection of toxic and carcinogenic polycyclic aromatic hydrocarbons (PAHs) can ceaselessly propel the environmental surveillance in aqueous ecosystems. Due to the intrinsic nonadsorptive feature of PAHs, the promising technique of surface-enhanced Raman scattering (SERS) spectroscopy has been restricted to diverse functional ligands-based surface modifications of nano-substrates. However, it is not suitable for practical ultralow liquid analysis. Herein, we propose an extraordinary strategy to boost liquid-near infrared (NIR)-SERS activity of plasmonic Au/Ag nano-urchins (NUs) by introducing extra 808 nm laser-triggered an additional strong electromagnetic enhancement into routine 785 nm laser-Raman system. The synergistic double laser-excited NIR-SERS of colloidal Au/Ag NUs enables the Raman signals of crystal violet to be significantly enhanced, approaching a maximum of ∼34-fold increase than that of traditional bare 785 nm laser-excitation. More importantly, the improved liquid-NIR-SERS enables the in-situ detection limit of pyrene molecules in lake water to be achieved at ∼10-9 M, which is already better than many previous SERS results based on the complicated functionalized nano-substrates. The established double laser-boosted NIR-SERS can also be easily extended to the simultaneous trace-detection of three PAHs-contaminated mixtures, supporting well distinguishable capability. Undoubtedly, the present work opens a new versatile and innovative avenue for ultrasensitive NIR-SERS monitoring of nonadsorptive toxic pollutants in wastewater.

Plasmonic features of free-standing chitosan nanocomposite film with silver and graphene oxide for SERS applications

A scalable procedure of SERS substrates design was developed using a novel plasmonic structure based on a freestanding chitosan film, silver nanoparticles, and graphene oxide. Chitosan provides a uniform distribution of silver nanoparticles from a colloidal suspension and, therefore, a reproducible Raman signal from local areas of measurements of several tens of microns. The addition of graphene oxide (GO) to the colloidal solution of silver nanoparticles suppresses the tortuous background fluorescence signal from the analyte and leads to an increase in the signal-to-fluorescence background intensity ratio by up to 6 times as compared to structures without GO. The manufactured plasmonic polymer nanocomposite provides a detection limit of down to 100 pM for R6G using a laser wavelength of 532 nm through a portable ×10 objective. The high colloidal stability of GO in water and the use of an aqueous colloid of silver nanoparticles simplify the procedure for creating a substrate by applying the GO-silver composite on the surface of a chitosan film without a need to form a GO film. Therefore, our approach paves a promising avenue to provide more sensitive detection even for the fluorescent analytes with short-wavelength lasers (532, 633 nm) instead of IR (785, 1024 nm) and foster the practical application of the developed plasmonic composites on portable Raman spectrometers.

Molecular Immobilization and Resonant Raman Amplification by Complex-Loaded Enhancers (MIRRACLE) on copper (II)-chitosan-modified SERS-active metallic nanostructured substrates for multiplex determination of dopamine, norepinephrine, and epinephrine

A unique approach based on Molecular Immobilization and Resonant Raman Amplification by Complex-Loaded Enhancers (MIRRACLE) on copper (II)-chitosan-modified SERS-active metallic nanostructured substrates is proposed for sensitive and rapid determination of the catecholamines (CA) dopamine, norepinephrine, and epinephrine. The ternary (CA)₂Cu(4AAP)₂ complexes were characterized by the appearance of new absorbance bands at 555, 600, and 500 nm for dopamine, norepinephrine, and epinephrine, respectively. The new absorbance band matched with a broad surface plasmon resonance band of utilized silver nanoparticles: 450-600 nm, and 633 excitation wavelength. We observed enhancement factors up to 3.6·10⁶ due to the additional resonant enhancement. The multiplexing capabilities of quantitative spectral unmixing for Raman spectra of a group of CAs, which differ by only either hydroxy or methyl group, at the fingerprint region were successfully demonstrated with the direct classic least squares model. The achieved nM limits of detection with only 1.5 mW laser power and analysis of spiked human blood plasma samples proved the possibility of the multiplex determination of the catecholamines at the level of reference concentrations in the blood of healthy people as well as promise for the future facilitation in the precision diagnosis of neuroendocrine tumors and neurodegenerative diseases.

Advances in Optical Sensors for Persistent Organic Pollutant Environmental Monitoring

Optical chemical sensors are widely applied in many fields of modern analytical practice, due to their simplicity in preparation and signal acquisition, low costs, and fast response time. Moreover, the construction of most modern optical sensors requires neither wire connections with the detector nor sophisticated and energy-consuming hardware, enabling wireless sensor development for a fast, in-field and online analysis. In this review, the last five years of progress (from 2017 to 2021) in the field of optical chemical sensors development for persistent organic pollutants (POPs) is provided. The operating mechanisms, the transduction principles and the types of sensing materials employed in single selective optical sensors and in multisensory systems are reviewed. The selected examples of optical sensors applications are reported to demonstrate the benefits and drawbacks of optical chemical sensor use for POPs assessment.

Capture, Detection, and Simultaneous Identification of Rare Circulating Tumor Cells Based on a Rhodamine 6G-Loaded Metal-Organic Framework

Circulating tumor cells (CTCs) play a key role in the development of tumor metastasis. It will be a big step forward for CTC application as a reliable clinical liquid biopsy marker to be able to identify the captured CTCs while achieving a high capture efficiency within one analytical system. Herein, in this work, a stimuli-responsive and rhodamine 6G (Rho 6G)-entrapped fluorescent metal-organic framework (MOF) probe, named MOF-Rho 6G-DNA, was designed to capture, detect, and subsequently identify CTCs from blood samples of cancer patients. The probe was fabricated by modifying the epithelial cell adhesion molecule (EpCAM) hairpin DNA aptamer with Rho 6G enclosed and an Arm-DNA-attached UiO-66-NH2 MOF by sequence complementation. CTCs could be captured by the EpCAM hairpin DNA on the probe; as a result, Rho 6G loaded in the probe was released, and the number of CTCs was positively related to the concentration of released Rho 6G. An excellent correlation of fluorescence intensities with CTC numbers was obtained from 2 to 500 cells/mL. More importantly, the MOF-Rho 6G-DNA probe simultaneously realized rapid identification of the captured cells within 30 min by only relying on the residue Rho 6G in the MOF cavity. The captured target cells can be conveniently released from the probe using the complementary DNA sequence. These performance features of the probe were further verified by blood samples from patients of various types of tumor.