Amperometric Environmental Phosphate Sensors

Robust (hydrogen) phosphate sensing based on reversible redox of cobalt(II) hydroxide

Response mechanism of the electrode is elucidated in terms of (hydrogen) phosphate accelerating oxidation of CoII to CoIII for the first time. Cyclic voltammetric techniques in conjunction with XRD, XPS and Raman characterizations have demonstrated unambiguously the response of cobalt (II) hydroxide electrode involves a phosphate and hydrogen ion dependent charge transfer process. Phosphate ions induce Co(OH)2 transformed into CoOOH within interlayer adsorption and restored the initial state after reduction. Meanwhile, the in common structural between Co(OH)2 and CoOOH prevents extensive structural convertibility upon cycling, result in the advantage of reversibility in phase transformation. Demonstrated sustainable technique offered the determination of phosphate with robust reproducibility (1000 cycles), long storage stability (6 months) and selectivity (potential interference: Cl-, NO3-, SO42- and HCO3-), achieving a detection limit of 5 × 10-8 M over a wide linear range up to 1.28 mM. Presented work provided insights into the unique selectivity towards phosphate in cobalt based sensors, which may inspire the rational design of Co(OH)2-based electrodes with superior electrochemical performance or extended applications.

Reduced graphene oxide-wrapped La0·8Sr0·2MnO3 microspheres sensing electrode for highly sensitive nitrite detection

An electrochemical nitrite sensor based on perovskite oxides La_0·8Sr_0·2MnO₃ (LSM) microspheres-decorated reduced graphene oxide (rGO) composite was presented to take the merit of the excellent electrocatalytic activity of the LSM and the large surface area of rGO. The content of rGO has been finely adjusted and the electrochemical sensor employing 15 wt% rGO has shown an ultralow nitrite detection limit of 0.016 μM and a high sensitivity of 0.041 μA μM^-1 cm^-2 and 0.039 μA μM^-1 cm^-2 in the range of 2-100 and 100-5000 μM, respectively. In addition, the proposed electrode shows good selectivity, reproducibility and stability, suitable for detection of nitrite at various pH values. The sensor was used to determine the nitrite level in environmental water samples with acceptable relative error, demonstrating its feasibility for practical environmental monitoring.

Portable All-in-One Electrochemical Actuator-Sensor System for the Detection of Dissolved Inorganic Phosphorus in Seawater

We present a methodology for the detection of dissolved inorganic phosphorous (DIP) in seawater using an electrochemically driven actuator-sensor system. The motivation for this work stems from the lack of tangible solutions for the in situ monitoring of nutrients in water systems. It does not require the addition of any reagents to the sample and works under mild polarization conditions, with the sample confined to a thin-layer compartment. Subsequent steps include the oxidation of polyaniline to lower the pH, the delivery of molybdate via a molybdenum electrode, and the formation of an electroactive phosphomolybdate complex from DIP species. The phosphomolybdate complex is ultimately detected by either cyclic voltammetry (CV) or square wave voltammetry (SWV). The combined release of protons and molybdate consistently results in a sample pH < 2 as well as a sufficient excess of molybdate, fulfilling the conditions required for the stoichiometric detection of DIP. The current of the voltammetric peak was found to be linearly related to DIP concentrations between 1 and 20 μM for CV and 0.1 and 20 μM for SWV, while also being selective against common silicate interference. The analytical application of the system was demonstrated by the validated characterization of five seawater samples, revealing an acceptable degree of difference compared to chromatography measurements. This work paves the way for the future DIP digitalization in environmental waters by in situ electrochemical probes with unprecedented spatial and temporal resolution. It is expected to provide real-time data on anthropogenic nutrient discharges as well as the improved monitoring of seawater restoration actions.

Efficient Electrochemical Microsensor for In Vivo Monitoring of H2O2 in PD Mouse Brain: Rational Design and Synthesis of Recognition Molecules

Hydrogen peroxide (H₂O₂), one of the most stable and abundant reactive oxygen species (ROS), acting as a modulator of dopaminergic signaling, has been intimately implicated in Parkinson's disease, creating a critical need for the selective quantification of H₂O₂ in the living brain. Current natural or nanomimic enzyme-based electrochemical methods employed for the determination of H₂O₂ suffer from inadequate selectivity and stability, due to which the in vivo measurement of H₂O₂ in the living brain remains a challenge. Herein, a series of 5-(1,2-dithiolan-3-yl)-N-(4-(4,4,5,5-tetramethyl-1,3,2-dioxaborolan-2-yl)phenyl)pentanamide (DBP) derivatives were designed by tuning the substitute groups and sites of a boric acid ester, which served as probes to specifically react with H₂O₂. Consequently, the reaction products, 5-(1,2-dithiolan-3-yl)-N-(4-hydroxyphen-yl)pentanamide (DHP) derivatives, converted the electrochemical signal from inactive into active. After systematically evaluating their performances, 5-(1,2-dithiolan-3-yl)-N-(3-chloro-4-(4,4,5,5-tetramethyl-1,3,2-dioxaborolan-2-yl)phenyl)pentanamide (o-Cl-DBP) was finally identified as the optimized probe for H₂O₂ detection as it revealed the fastest reaction time, the largest current density, and the most negative potential. In addition, electrochemically oxidized graphene oxide (EOGO) was utilized to produce a stable inner reference. The designed electrochemical microsensor provided a ratiometric strategy for real-time tracking of H₂O₂ in a linear range of 0.5-600 μM with high selectivity and accuracy. Eventually, the efficient electrochemical microsensor was successfully applied to the measurement of H₂O₂ in Parkinson's disease (PD) mouse brain. The average levels of H₂O₂ in the cortex, striatum, and hippocampus in the normal mouse and PD mouse were systematically compared for the first time.

An excited state intramolecular proton transfer induced phosphate ion targeted ratiometric fluorescent switch to monitor phosphate ions in human peripheral blood mononuclear cells

Detection of biological phosphate is very important for environmental and health care applications. In this study, a new ratiometric fluorescent probe (E)-N'-(3-(benzo[d]thiazol-2-yl)-2-hydroxybenzylidene) picolinohydrazide (BTP) is developed and exhibits a prominent excited-state intramolecular proton-transfer (ESIPT) mechanism. The probe BTP undergoes a unique phosphate induced hydrolytic reaction in mixed aqueous solution which produces a colorimetric change associated with a huge red-shift of ∼130 nm in the UV-visible absorption spectrum. Initially, BTP exhibits a strong fluorescence emission as the ESIPT process is 'on' and the tautomeric hydrogen remains flexible and is free to give two tautomeric forms. Eventually, after the addition of PO₄^3-, the two tautomeric forms break and thereby shift the equilibrium towards the 'enol' form. The phosphate ion binds with BTP which is associated with a ratiometric change and accounts for an enhancement in the fluorescence intensity with a large blue shift and the limit of detection value of 8.33 × 10^-8 M in a mixed aqueous medium. The binding constant (1.92 × 10⁵ M^-1) proportionally reflects the stability of the complexation between the binding sites of BTP with the guest PO₄^3- anion. The probable mechanism is supported by the NMR spectroscopy studies. The sensing phenomenon is found to be reversible towards Zn²⁺ and thus the sensor beautifully mimics the INHIBIT logic gate. Observations have been made in fluorescence imaging studies with human peripheral blood mononuclear cells (PBMCs) which indicates that BTP can be employed to successfully monitor the phosphate ion in human PBMCs.

Potentiometric aptasensing of Escherichia coli based on electrogenerated chemiluminescence as a highly sensitive readout

We introduce here a versatile approach to read out potentiometric aptasensors by electrogenerated chemiluminescence (ECL), which can amplify the small potential changes induced by the bacterial concentrations via ECL signals. In the present system, the electrode modified with single-walled carbon nanotubes (SWCNTs) and aptamer molecules acts as the reference electrode and is placed in the sample solution for sensing the bacterial concentration changes, while the Ru(bpy)₃²⁺ modified gold electrode serves as the working electrode for generating ECL signals and is placed in the detection solution containing tripropylamine (TPA) spatially separated from the sample solution by a salt bridge. Ru(bpy)₃²⁺ is immobilized on the gold electrode's surface for enhancement of luminous efficiency and reduction of reagent consumption. A moving-part-free fluid flowing system is introduced to promote the mass transport of TPA from the detection solution to the surface of the ECL generating electrode. When a constant potential is imposed between the working and reference electrodes, the potential changes at the SWCNTs-aptamer modified electrode induced by the bacterial concentrations can modulate the potentials at the Ru(bpy)₃²⁺ modified electrode, thus generating the ECL signals. The developed sensing strategy shows a highly sensitive response to E. coli O157: H7 in the linear range of 5-1000 CFU mL^-1 with a low detection limit of 2 CFU mL^-1. We believe that the proposed approach is promising to develop aptasensors for sensitive detection of bacterial cells.