Flexible Chemiresistive Cyclohexanone Sensors Based on Single-Walled Carbon Nanotube-Polymer Composites

CO2 Responsive Thin-Film Transistors Using Conjugated Polymer Complexes with Single-Walled Carbon Nanotubes

Introduction of amidine groups within the side chains of a conjugated polyfluorene was carried out using copper-catalyzed azide-alkyne cycloaddition. The resulting polymer was shown to form strong supramolecular interactions with the sidewalls of single-walled carbon nanotubes (SWNTs), forming polymer-nanotube complexes that exhibited solubility in various organic solvents. It was shown that the polymer-SWNT complexes were responsive to CO2, where the amidine groups formed amidinium bicarbonate salts upon CO2 exposure, causing the polymer-SWNT complexes to precipitate. This reaction could be reversed by bubbling N2 through the solution, which caused the polymer-SWNT complexes to redissolve. Incorporation of the polymer-SWNT complexes within thin-film transistor (TFT) devices as the active layer resulted in a CO2-responsive TFT sensor. It was found that the sensory device underwent a reversible shift in its threshold voltage from 5 to -1 V as well as a 1 order of magnitude decrease in its on-current upon exposure to CO2. This work shows that conjugated polymer-wrapped SWNTs having sensory elements within the polymer side chain can be used as the active layer within functional SWNT-based TFT sensors.

Application of Polyoxometalates in Chemiresistive Gas Sensors: A Review

Polyoxometalates (POMs) are a series of molecular metal compounds based on W and Mo elements, exhibiting excellent physical and chemical properties. POMs have been widely used in the fields of photoelectric materials, catalytic materials, and coordination chemistry. In recent years, POMs have emerged in the field of chemiresistive gas sensors. They can work as electron acceptors and improve the gas-sensing performance of traditional sensing materials by means of capturing electrons from semiconductors, separating electrons produced by light excitation or thermal excitation and delaying the recombination of electrons and holes. So far, the highest sensing sensitivity response of POMs-based chemiresistive gas sensor is 231 to 1 ppm NO₂ gas. In this review, an overview is investigated about how POMs have evolved as sensing materials in gas sensors. First, some POMs and POMs-based sensing materials in recent years are introduced and classified. After that, brief analyses for each kind of sensing materials are provided. Then we compare the reported POMs-based sensors in different sensing parameters. Finally, the future outlooks are discussed on the basis of the current developments. This work is the first comprehensive overview of POMs-based chemiresistive gas sensors. This work can provide valuable information for developing high-performance POMs-based gas sensors.

Gas Sensors Based on Single-Wall Carbon Nanotubes

Single-wall carbon nanotubes (SWCNTs) have a high aspect ratio, large surface area, good stability and unique metallic or semiconducting electrical conductivity, they are therefore considered a promising candidate for the fabrication of flexible gas sensors that are expected to be used in the Internet of Things and various portable and wearable electronics. In this review, we first introduce the sensing mechanism of SWCNTs and the typical structure and key parameters of SWCNT-based gas sensors. We then summarize research progress on the design, fabrication, and performance of SWCNT-based gas sensors. Finally, the principles and possible approaches to further improving the performance of SWCNT-based gas sensors are discussed.

Single-Atom Tailoring of Two-Dimensional Atomic Crystals Enables Highly Efficient Detection and Pattern Recognition of Chemical Vapors

Low-dimensional semiconductor materials, such as single-walled carbon nanotubes, two-dimensional (2D) atomic crystals, and organic frameworks, have been widely adapted as ideal platforms to construct various chemo/biosensors with satisfying sensitivity. However, the general drawbacks in chemiresistive devices, including high operation temperatures, low response to low-polarity molecules, and poor selectivity, have limited their real-world applications. In this study, 2D materials (graphene, MoS₂, and WSe₂) were systematically functionalized with series of monodispersed single atomic sites (Pt, Co, and Ru) through a facile approach to construct single-atom sensors (SASs) for the detection of VOCs at room temperature. The structural and catalytic characteristics of SAs successfully translated into enhanced gas-sensing performance, with a 1-2 orders of magnitude increase in relative response to ethanol (@5 ppm) and acetone (@20 ppm) vapors (in all M-2D SASs as compared to pristine substrates), high selectivity to VOCs against relative humidity (M-WSe₂ SASs), and fast response/recovery time (11/58 s for Pt-Graphene and 22/48 s for Pt-MoS₂ to 50 ppm ethanol, 9/57 s for Pt-Graphene and 15/75 s for Pt-MoS₂ to 200 ppm acetone) that are several times faster than the pristine 2D materials. Density functional theory (DFT) calculations revealed the signaling mechanism in SASs, and the data were further trained to build machine learning (ML) models for predicting the adsorption energies and sensing performance using the features of adsorption heights, metal charge, and charge transfer between the adsorbed VOCs and SASs sites. Finally, the rich combination of the metal single atoms and 2D atomic crystal supports were converted to cross-sensitive SA sensor array that allows for detection and identification of different VOCs.

Water-Selective Nanostructured Dehumidifiers for Molecular Sensing Spaces

Humidity and moisture effects, frequently called water poisoning, in surroundings are inevitable for various molecular sensing devices, strongly affecting their sensing characteristics. Here, we demonstrate a water-selective nanostructured dehumidifier composed of ZnO/TiO₂/CaCl₂ core-shell heterostructured nanowires for molecular sensing spaces. The fabricated nanostructured dehumidifier is highly water-selective without detrimental adsorptions of various volatile organic compound molecules and can be repeatedly operated. The thermally controllable and reversible dehydration process of CaCl₂·nH₂O thin nanolayers on hydrophilic ZnO/TiO₂ nanowire surfaces plays a vital role in such water-selective and repeatable dehumidifying operations. Furthermore, the limitation of detection for sensing acetone and nonanal molecules in the presence of moisture (relative humidity ∼ 90%) was improved more than 20 times using nanocomposite sensors by operating the developed nanostructured dehumidifier. Thus, the proposed water-selective nanostructured dehumidifier offers a rational strategy and platform to overcome water poisoning issues for various molecular and gas sensors.