Amplification of the Fluorescence Signal with Clustered Regularly Interspaced Short Palindromic Repeats-Cas12a Based on Au Nanoparticle-DNAzyme Probe and On-Site Detection of Pb2+ Via the Photonic Crystal Chip

Recent advances in photonic crystal-based chemical sensors

The increasing attention towards environmental quality, food safety, public security and medical diagnosis demands high requirements and standards for chemical sensors with merits of rapid response, high precision, long-term stability and reusability. In this case, a prominent innovation in sensory materials holds potential to realize new generations of chemical sensor technologies. Specifically, photonic crystals (PCs) as structured dielectric materials with spatially periodic ordered arrangements offer unique advantages in improving the sensing performance of chemical sensors. Consequently, the promising properties of PCs promote research on their implementation as an integral part of chemical sensors. This review highlights the integration of PCs into chemical sensors including a range of building blocks for the construction of PCs with versatile opal or opal inverse structural architectures and a delicate choice of surface functionality with associated sensing interfaces for target recognition and signal transduction. Subsequently, based on their synthesis and functionality, we focus on introducing the sensing principles of recent advances in PC-based chemical sensors, such as reflection spectra-based sensing, visual colorimetric sensing, fluorescence sensing, surface-enhanced Raman spectroscopy (SERS)-based sensing and other integrated sensing. Finally, the future prospects and challenges are discussed for the further improvement of PC-based chemical sensors.

Enzyme-Programmed Self-Assembly of Nanoparticles

Nanoparticles are a hot topic in the field of nanomaterial research due to their excellent physical and chemical properties. In recent years, DNA-directed nanoparticle self-assembly technology has been widely applied to the development of numerous complex nanoparticle superstructures. Due to the inherent stability and surface electric repulsion of nanoparticles, it is difficult to make nanoparticle superstructures respond to molecular signals in the external environment. In fact, enzyme-programmed molecular systems are developed to allow diverse functions, including logical operations, signal amplification, and dynamic assembly control. Therefore, combining enzyme-controlled DNA systems may endow nanoparticle assembly systems with more flexibility in program design, allowing them to respond to a variety of external signals. In this review, we summarize the basic principles of enzyme-controlled DNA/nanoparticle self-assembly and introduce its applications in heavy metal detection, gene expression, proteins inside living cells, cancer cell therapy, and drug delivery. With the continuous development of new nanoparticle materials and the increasing functionality of enzyme DNA circuits, enzyme-directed DNA/nanoparticle self-assembled probe technology is expected to see significant future development.

Fluorescent immunoassay for chloramphenicol based on the label-free polyadenine-mediated spherical nucleic acids triggered signal amplification

A fluorescent immunosorbent assay incorporating signal amplification away from the surface of spherical nucleic acid (SNA) was developed for the detection of chloramphenicol (CAP). Through the conjugation of antibodies and poly-adenine (polyA) DNA onto the surface of gold nanoparticles (AuNPs), the fabrication of the nano-immunoprobe was achieved in a more straightforward and cost-effective manner. Moreover, a strategy utilizing the hybridization chain reaction (HCR) in the amplification step was devised, with particular attention given to the enzyme inhibition associated with SNA. The results demonstrated good performance on CAP detection with a linear range of 0.01-5 ng/L with a detection limit of 0.005 ng/L. The significance of this work mainly lies in the polyA-SNA-based immunoprobe and the thoughtful design to prevent enzyme inhibition.

DNAzyme-activated CRISPR/Cas assay for sensitive and one-pot detection of lead contamination

Hazardous lead ions (Pb2+) even at a minute level can pose side effects on human health, highlighting the need for tools for trace Pb2+ detection. Herein, we present a DNAzyme-activated CRISPR assay (termed DzCas12T) for sensitive and one-pot detection of lead contamination. Using an extension-bridged strategy eliminates the need for separation to couple the DNAzyme recognition and CRISPR reporting processes. The tandem design endowed the DzCas12T assay with high specificity and sensitivity down to the pM-level. This assay has been used to detect lead contamination in food and water samples, indicating the potential for monitoring lead-associated environmental and food safety.

Smart Stimuli-Responsive Spherical Nucleic Acids: Cutting-Edge Platforms for Biosensing, Bioimaging, and Therapeutics

Spherical nucleic acids (SNAs) with exceptional colloidal stability, multiple modularity, and programmability are excellent candidates to address common molecular delivery-related issues. Based on this, the higher targeting accuracy and enhanced controllability of stimuli-responsive SNAs render them precise nanoplatforms with inestimable prospects for diverse biomedical applications. Therefore, tailored diagnosis and treatment with stimuli-responsive SNAs may be a robust strategy to break through the bottlenecks associated with traditional nanocarriers. Various stimuli-responsive SNAs are engineered through the incorporation of multifunctional modifications to meet biomedical demands with the development of nucleic acid functionalization. This review provides a comprehensive overview of prominent research in this area and recent advancements in the utilization of stimuli-responsive SNAs in biosensing, bioimaging, and therapeutics. For each aspect, SNA nanoplatforms that exhibit responsive behavior to both internal stimuli (including sequence, enzyme, redox reactions, and pH) and external stimuli (such as light and temperature) are highlighted. This review is expected to offer inspiration and guidance strategies for the rational design and development of stimuli-responsive SNAs in the field of biomedicine.

A near-infrared fluorescent ratiometric probe with large Stokes shift for multi-mode sensing of Pb2+ and bioimaging

Pb2+ is a heavy metal ion pollutant that poses a serious threat to human health and ecosystems. The conventional methods for detecting Pb2+ have several limitations. In this study, we introduce a novel fluorescent probe that enables the detection of Pb2+ in the near-infrared region, free from interference from other common ions. A unique characteristic of this probe is its ability to rapidly and accurately identify Pb2+ through ratiometric measurements accompanied by a large Stokes shift of 201 nm. The limit of detection achieved by probe was remarkably low, surpassing the standards set by the World Health Organization, and outperforming previously reported probes. To the best of our knowledge, this is the first organic small-molecule fluorescent probe with both near-infrared emission and ratiometric properties for the detection of Pb2+. We present a triple-mode sensing platform constructed using a probe that allows for the sensitive and selective recognition of Pb2+ in common food items. Furthermore, we successfully conducted high-quality fluorescence imaging of Pb2+ in various samples from common edible plants, HeLa cells, Caenorhabditis elegans, and mice. Importantly, the probe-Pb2+ complex exhibited tumour-targeting capabilities. Overall, this study presents a novel approach for the development of fluorescent probes for Pb2+ detection.

A novel universal small-molecule detection platform based on antibody-controlled Cas12a switching

Molecular diagnostics play an important role in illness detection, prevention, and treatment, and are vital in point-of-care test. In this investigation, a novel CRISPR/Cas12a based small-molecule detection platform was developed using Antibody-Controlled Cas12a Biosensor (ACCBOR), in which antibody would control the trans-cleavage activity of CRISPR/Cas12a. In this system, small-molecule was labeled around the PAM sites of no target sequence(NTS), and antibody would bind on the labeled molecule to prevent the combination of CRISPR/Cas12a, resulting the decrease of trans-cleavage activity. Biotin-, digoxin-, 25-hydroxyvitamin D3 (25-OH-VD3)-labeled NTS and corresponding binding protein were separately used to verify its preformance, showing great universality. Finally, one-pot detection of 25-OH-VD3 was developed, exhibiting high sensitivity and excellent specificity. The limit of detection could be 259.86 pg/mL in serum within 30 min. This assay platform also has the advantages of low cost, easy operation (one-pot method), and fast detection (∼30 min), would be a new possibilities for the highly sensitive detection of other small-molecule targets.

Fluorescence biosensor for ultrasensitive detection of the available lead based on target biorecognition-induced DNA cyclic assembly

A fluorescence biosensor was developed for the ultrasensitive detection of the available lead in soil samples by coupling with DNAzyme and hairpin DNA cyclic assembly. The biorecognition between lead and 8-17 DNAzyme will cleave the substrate strands (DNA2) and release the trigger DNA (T), which can be used to initiate the DNA assembly reactions among the hairpins (H1, H2, and H3). The formed Y-shaped sensing scaffold (H1-H2-H3) contains active Mg2+-DNAyzmes at three directions. In the presence of Mg2+, the BHQ and FAM modified H4 will be cleaved by the Mg2+-DNAyzme to generate a high fluorescence signal for lead monitoring. The linear range of the fluorescence biosensor is from 1 pM to 100 nM and the detection limit is 0.2 pM. The biosensor also exhibited high selectivity and the nontarget competing heavy metals did not interfere with the detection results. Compare with the traditional method (DTPA+ICP-MS) for the available lead detection, the relative error (Re) is in the range from -8.3 % to 9.5 %. The results indicated that our constructed fluorescence biosensor is robust, accurate, and reliable, and can be applied directly to the detection of the available lead in soil samples without complex extraction steps.

CRISPR/Cas System: The Accelerator for the Development of Non-nucleic Acid Target Detection in Food Safety

Non-nucleic acid targets have posed a serious challenge to food safety. The detection of non-nucleic acid targets can enable us to monitor food contamination in a timely manner. In recent years, the CRISPR/Cas system has been extensively explored in biosensing. However, there is a lack of a summary of CRISPR/Cas-powered detection tailored to non-nucleic acid targets involved in food safety. This review comprehensively summarizes the recent advances on the construction of CRISPR/Cas-powered detection and the promising applications in the field of food safety related non-nucleic acid targets. The current challenges and futuristic perspectives are also proposed accordingly. The rapidly evolving CRISPR/Cas system has provided a powerful propellant for non-nucleic acid target detection via integration with aptamer and/or DNAzyme. Compared with traditional analytical methods, CRISPR/Cas-powered detection is conceptually novel, essentially eliminates the dependence on large instruments, and also demonstrates the capability for rapid, accurate, sensitive, and on-site testing.

Triplex DNA Helix Sensor Based on Reduced Graphene Oxide and Electrodeposited Gold Nanoparticles for Sensitive Lead(II) Detection

A triplex DNA electrochemical sensor based on reduced graphene oxide (rGO) and electrodeposited gold nanoparticles (EAu) was simply fabricated for Pb2+ detection. The glass carbon electrode (GCE) sequentially electrodeposited with rGO and EAu was further modified with a triplex DNA helix that consisted of a guanine (G)-rich circle and a stem of triplex helix based on T-A•T base triplets. With the existence of Pb2+, the DNA configuration which was formed via the Watson-Crick and Hoogsteen base pairings was split and transformed into a G-quadruplex. An adequate electrochemical response signal was provided by the signal indicator methylene blue (MB). The proposed sensor demonstrated a linear relationship between the differential pulse voltammetry (DPV) peak currents and the logarithm of Pb2+ concentrations from 0.01 to 100.00 μM with a detection limit of 0.36 nM. The proposed sensor was also tested with tap water, river and medical wastewater samples with qualified recovery and accuracy and represented a promising method for Pb2+ detection.

Non-fouling polymer brush grafted fluorine-doped tin oxide enabled optical and chemical enhancement for sensitive label-free antibody microarrays

Oblique-incidence reflectivity difference (OIRD) is a compelling technique for real-time, label-free and non-destructive detection of antibody microarray chips, but its sensitivity needs essential improvement for clinical diagnosis. In this study, we report an innovative high-performance OIRD microarray by using poly[oligo(ethylene glycol) methacrylate-co-glycidyl methacrylate] (POEGMA-co-GMA) brush grafted fluorine-doped tin oxide (FTO) as the chip substrate. The polymer brush enhances the interfacial binding reaction efficiency of targets from the complicated sample matrix due to its high antibody loading and excellent anti-fouling merits; the FTO-polymer brush layered structure, on the other hand, excites the interference enhancement effect of OIRD to achieve enhanced intrinsic optical sensitivity. Synergistically, the sensitivity of this chip is significantly improved compared to rival chips, achieving a limit of detection (LOD) as low as 25 ng mL^-1 for the model target C-reactive protein (CRP) in 10% human serum. This work explores the tremendous influence of the chip interfacial structure on the OIRD sensitivity and proposes a rational interfacial engineering strategy to boost the performance of the label-free OIRD based microarray and other bio-devices.

Sensitive CRISPR-Cas12a-Assisted Immunoassay for Small Molecule Detection in Homogeneous Solution

Sensitive detection of small molecules is crucial for many applications, like biomedical diagnosis, food safety, and environmental analysis. Here, we describe a sensitive CRISPR-Cas12a-assisted immunoassay for small molecule detection in homogeneous solution. An active DNA (acDNA) modified with a specific small molecule serves as a competitor for antibody binding and an activator of CRISPR-Cas12a. Large-sized antibody binding with this acDNA probe inactivates the collateral cleavage activity of CRISPR-Cas12a due to a steric effect. When free small molecule target exists, it replaces the small molecule-modified acDNA from antibody, triggering catalytic cleavage of DNA reporters by CRISPR-Cas12a, and strong fluorescence is generated. With this strategy, we achieved detection of three important small molecules as models, biotin, digoxin, and folic acid, at picomolar levels by using streptavidin or antibody as recognition elements. With the progress of DNA-encoded small molecules and antibody, the proposed strategy provides a powerful toolbox for detection of small molecules in wide applications.

Construction of molecular logic gates using heavy metal ions as inputs based on catalytic hairpin assembly and CRISPR-Cas12a

We successfully constructed several molecular logic gates using heavy metal ions as inputs based on catalytic hairpin assembly (CHA) and CRISPR-Cas12a. The corresponding DNAzymes were used to recognize heavy metal ions (Hg²⁺, Cd²⁺, Pb²⁺, and Mn²⁺). The specific cleavage between heavy metal ions and DNAzymes leads to the release of the trigger DNA, which can be used to activate CHA through logic computation. The CHA-generated DNA duplexes contain the protospacer adjacent motifs (PAM) sequence, which can be distinguished by CRISPR-Cas12a. The hybridization interactions between the duplexes and gRNA will activate the trans-cleavage capability of Cas12a, which can cleave the single-stranded DNA (ssDNA) reporter. The separation of the fluorescence group and quench group in ssDNA will generate a high fluorescence signal for readout. Using Hg²⁺ and Cd²⁺ as the two inputs, several basic logic gates were constructed, including OR, AND, and INHIBT. Using Hg²⁺, Cd²⁺, Pb²⁺, and Mn²⁺ as the four inputs, cascaded logic gates were further fabricated. With the advantages of scalability, versatility, and logic computing capability, our proposed molecular logic gates can provide an intelligent sensing system for heavy metal ions monitoring.

Mesoporous Nanozyme-Enhanced DNA Tetrahedron Electrochemiluminescent Biosensor with Three-Dimensional Walking Nanomotor-Mediated CRISPR/Cas12a for Ultrasensitive Detection of Exosomal microRNA

Exosomal microRNAs (exomiRNAs) have emerged as ideal biomarkers for early clinical diagnostics. The accurate detection of exomiRNAs plays a crucial role in facilitating clinical applications. Herein, an ultrasensitive electrochemiluminescent (ECL) biosensor was constructed using three-dimensional (3D) walking nanomotor-mediated CRISPR/Cas12a and tetrahedral DNA nanostructures (TDNs)-modified nanoemitters (TCPP-Fe@HMUiO@Au-ABEI) for exomiR-155 detection. Initially, the 3D walking nanomotor-mediated CRISPR/Cas12a strategy could effectively convert the target exomiR-155 into amplified biological signals for improving the sensitivity and specificity. Then, TCPP-Fe@HMUiO@Au nanozymes with excellent catalytic performance were used to amplify ECL signals because of the enhanced mass transfer and increased catalytic active sites, originating from its high surface areas (601.83 m²/g), average pore size (3.46 nm), and large pore volumes (0.52 cm³/g). Meanwhile, the TDNs as the scaffold to fabricate "bottom-up" anchor bioprobes could improve the trans-cleavage efficiency of Cas12a. Consequently, this biosensor achieved the limit of detection down to 273.20 aM ranging from 1.0 fM to 1.0 nM. Furthermore, the biosensor could discriminate breast cancer patients evidently by analyzing exomiR-155, and these results conformed to that of qRT-PCR. Thus, this work provides a promising tool for early clinical diagnostics.

Nanozyme-catalysed CRISPR-Cas12a system for the preamplification-free colorimetric detection of lead ion

CRISPR-based detection was often based on the target preamplification to realize the high sensitivity. Here, we prepared a CRISPR-Cas12a system for the colorimetric detection of lead ion (Pb²⁺) based on the assistance of DNAzyme and nanozyme instead of preamplification. The recognition between GR-5 DNAzyme and Pb²⁺ could trigger the CRISPR-Cas12a system. MnO₂ nanozymes connected with magnetic beads through single stranded DNA were prepared as the colorimetric signal probes and catalyst of CRISPR-Cas12a system for the strong oxidase-like activity inducing the color change of 3,3',5,5'-tetramethylbenzidine. The nanozyme-catalysed CRISPR-Cas12a system could be used to detect Pb²⁺ through the color change with high specificity and sensitivity. The linear range of this approach was 0.8 nM-2500 nM, with a limit of detection of 0.54 nM. This method was applied for the detection of the Pb²⁺ in food samples indicating good accuracy and anti-interference ability.