Hydroxylation of Benzene via C-H Activation Using Bimetallic CuAg@g-C3N4

Visible light mediated synthesis of 1,3-diarylated imidazo[1,5-a]pyridines via oxidative amination of C-H catalyzed by graphitic carbon nitride

Graphitic carbon nitride (g-C3N4) as a novel heterogeneous catalyst is employed for the visible light-mediated synthesis of the imidazo[1,5-a]pyridines via the oxidative amination of C-H bond at room temperature without the need for any additional solvent. Extensive characterization of the catalyst was performed using techniques such as FT-IR, PXRD, TGA, SEM and EDX analysis. The optimized conditions enabled the successful and expeditious conversion of a wide range of substrates to imidazo[1,5-a]pyridines in good yields; a notable advantage of this catalyst being recyclability, as it can be reused for up to five cycles without significant loss of activity. This feature makes it suitable for gram-scale synthesis of imidazo[1,5-a]pyridines. Additionally, this approach offers several benefits from a green chemistry perspective as affirmed by its favorable green chemistry metrics (GCM), including low process mass intensity (PMI), low E-factor, high atom economy (AE), and good reaction mass efficiency (RME) relative to existing protocols. In addition, chemical yield (CY), mass intensity (MI), mass productivity (MP) and optimum efficiency were also calculated. This environmentally friendly method offers multiple advantages and represents a significant advancement in the synthesis of imidazo[1,5-a]pyridines.

Enabling Specific Benzene Oxidation by Tuning the Adsorption Behavior on Au Loaded MgAl Layered Double Hydroxides

Direct and selective oxidation of benzene to phenol is a long-term goal in industry. Although great efforts have been made in homogenous catalysis, it still remains a huge challenge to drive this reaction via heterogeneous catalysts under mild conditions. Herein, a single-atom Au loaded MgAl-layered double hydroxide (Au1 -MgAl-LDH) with a well-defined structure, in which the Au single atoms are located on the top of Al3+ with Au-O4 coordination as revealed by extended x-ray-absorption fine-structure (EXAFS)and density-functional theory (DFT)calculation is reported. The photocatalytic results prove the Au1 -MgAl-LDH is capable of driving benzene oxidation reaction with O2 in water, and exhibits a high selectivity of 99% for phenol. While contrast experiment shows a ≈99% selectivity for aliphatic acid with Au nanoparticle loaded MgAl-LDH (Au-NP-MgAl-LDH). Detailed characterizations confirm that the origin of the selectivity difference can be attributed to the profound adsorption behavior of substrate benzene with Au single atoms and nanoparticles. For Au1 -MgAl-LDH, single Au-C bond is formed in benzene activation and result in the production of phenol. While for Au-NP-MgAl-LDH, multiple AuC bonds are generated in benzene activation, leading to the crack of CC bond.

Highly Dispersed Vanadia Anchored on Protonated g-C3N4 as an Efficient and Selective Catalyst for the Hydroxylation of Benzene into Phenol

The direct hydroxylation of benzene is a green and economical-efficient alternative to the existing cumene process for phenol production. However, the undesired phenol selectivity at high benzene conversion hinders its wide application. Here, we develop a one-pot synthesis of protonated g-C3N4 supporting vanadia catalysts (V-pg-C3N4) for the efficient and selective hydroxylation of benzene. Characterizations suggest that protonating g-C3N4 in diluted HCl can boost the generation of amino groups (NH/NH2) without changing the bulk structure. The content of surface amino groups, which determines the dispersion of vanadia, can be easily regulated by the amount of HCl added in the preparation. Increasing the content of surface amino groups benefits the dispersion of vanadia, which eventually leads to improved H2O2 activation and benzene hydroxylation. The optimal catalyst, V-pg-C3N4-0.46, achieves 60% benzene conversion and 99.7% phenol selectivity at 60 oC with H2O2 as the oxidant.

An efficient photocatalyst based on H5PMo10V2O40/UiO-66-NH2 for direct hydroxylation of benzene to phenol by H2O2

To realize the direct hydroxylation of benzene to phenol by hydrogen peroxide, an efficient photoactive catalyst system was prepared by the recombination of H₅PMo₁₀V₂O₄₀ and UiO-66-NH₂. The heterpolyacid was uniformly distributed on the UiO-66-NH₂, and the combination was stable. The composite could effectively photocatalyze the direct hydroxylation of benzene to phenol by H₂O₂ in the mixture solution of acetonitrile and acetic acid. The yield and selectivity were 14.08% and 98.8% under the optimum condition, respectively. The performance of the catalyst still maintained well after 5 catalytic cycles. Hence, the investigated catalyst system might be applied in the field of hydroxylation of benzene to phenol.

Recent Advances in the Heterogeneous Photocatalytic Hydroxylation of Benzene to Phenol

Phenol is an important chemical material that is widely used in industry. Currently, phenol is dominantly produced by the well−known three−step cumene process, which suffers from severe drawbacks. Therefore, developing a green, sustainable, and economical strategy for the production of phenol directly from benzene is urgently needed. In recent years, the photocatalytic hydroxylation of benzene to phenol, which is economically feasible and could be performed under mild conditions, has attracted more attention, and development of highly efficient photocatalyst would be a key issue in this field. In this review, we systematically introduce the recent achievements of photocatalytic hydroxylation of benzene to phenol from 2015 to mid−2022, and various heterogeneous photocatalysts are comprehensively reviewed, including semiconductors, polyoxometalates (POMs), graphitic carbon nitride (g−C3N4), metal–organic frameworks (MOFs), carbon materials, and some other types of photocatalysts. Much effort is focused on the physical and chemical approaches for modification of these photocatalysts. The challenges and future promising directions for further enhancing the catalytic performances in photocatalytic hydroxylation of benzene are discussed in the end.

Nanoarchitectonics of g-C3N4 Nanosheets with a AuCu Enhancement Effect for Superior Photo- and Electrochemical Activity

AuCu alloy nanoparticles (NPs) were embedded in superior thin g-C₃N₄ nanosheets by a mechanochemical pre-reaction and subsequent thermal polymerization at high temperature. The introduction of AuCu NPs increased conductivity, decreased the band gap, expended light absorption, and improved the separation and transfer efficiencies of photogenerated electrons and holes. Moreover, the uniform distribution of AuCu NPs in g-C₃N₄ nanosheets is ascribed to the pre-reaction of bulk g-C₃N₄ and metal salts to create activity cites. The adsorption ability in the visible light region was improved due to the plasma effect of Au. AuCu/g-C₃N₄ composites (AuCu/CN-1%) with optimized component ratios revealed the highest transient photocurrent responses, the lowest electrochemical impedance arc radius, and the best photocatalytic H₂ evolution rate of 930.2 μmol g^-1 h^-1. These findings exhibited that loading AuCu bimetallic NPs could efficiently offset some disadvantages of g-C₃N₄ and improve its photocatalytic performances.

Silver nanomaterials: synthesis and (electro/photo) catalytic applications

In view of their unique characteristics and properties, silver nanomaterials (Ag NMs) have been used not only in the field of nanomedicine but also for diverse advanced catalytic technologies. In this comprehensive review, light is shed on general synthetic approaches encompassing chemical reduction, sonochemical, microwave, and thermal treatment among the preparative methods for the syntheses of Ag-based NMs and their catalytic applications. Additionally, some of the latest innovative approaches such as continuous flow integrated with MW and other benign approaches have been emphasized that ultimately pave the way for sustainability. Moreover, the potential applications of emerging Ag NMs, including sub nanomaterials and single atoms, in the field of liquid-phase catalysis, photocatalysis, and electrocatalysis as well as a positive role of Ag NMs in catalytic reactions are meticulously summarized. The scientific interest in the synthesis and applications of Ag NMs lies in the integrated benefits of their catalytic activity, selectivity, stability, and recovery. Therefore, the rise and journey of Ag NM-based catalysts will inspire a new generation of chemists to tailor and design robust catalysts that can effectively tackle major environmental challenges and help to replace noble metals in advanced catalytic applications. This overview concludes by providing future perspectives on the research into Ag NMs in the arena of electrocatalysis and photocatalysis.

Hydroxylation of benzene to phenol over heteropoly acid H5PMo10V2O40 supported on amine-functionalized MCM-41

Supported catalysts with Keggin type heteropoly acids (H5PMo10V2O40) loaded onto amine-functionalized MCM-41 for the catalytic hydroxylation of benzene to phenol with H2O2 were prepared by a wet impregnation method. The effects of the preparation conditions on the properties and activity of the supported catalysts were fully investigated. The results showed that the catalyst retained the mesoporous structure of MCM-41 and H5PMo10V2O40 was dispersed uniformly on the surface of the amine-functionalized MCM-41. Meanwhile, the reusability and catalytic performance of the catalyst were affected by two key factors, i.e., the interaction between the heteropoly acid and the surface of MCM-41, and the hydrophobicity of the catalyst since they decide the leaching of H5PMo10V2O40 and the adsorption of benzene. The catalyst with H5PMo10V2O40 loaded onto amine-functionalized MCM-41, which was prepared using ethanol as the solvent, exhibited the highest phenol yield (20.4%), a turnover frequency value of 20.3 h-1 and good reusability. We believe this work offers an effective and facile strategy for the preparation of a new catalyst for hydroxylation of benzene to phenol.

One-Step Catalytic or Photocatalytic Oxidation of Benzene to Phenol: Possible Alternative Routes for Phenol Synthesis?

Phenol is an important chemical compound since it is a precursor of the industrial production of many materials and useful compounds. Nowadays, phenol is industrially produced from benzene by the multi-step “cumene process”, which is energy consuming due to high temperature and high pressure. Moreover, in the “cumene process”, the highly explosive cumene hydroperoxide is produced as an intermediate. To overcome these disadvantages, it would be useful to develop green alternatives for the synthesis of phenol that are more efficient and environmentally benign. In this regard, great interest is devoted to processes in which the one-step oxidation of benzene to phenol is achieved, thanks to the use of suitable catalysts and oxidant species. This review article discusses the direct oxidation of benzene to phenol in the liquid phase using different catalyst formulations, including homogeneous and heterogeneous catalysts and photocatalysts, and focuses on the reaction mechanisms involved in the selective conversion of benzene to phenol in the liquid phase.

Silver-Nanoparticles Embedded Pyridine-Cholesterol Xerogels as Highly Efficient Catalysts for 4-Nitrophenol Reduction

Two xerogels made of 4-pyridyl cholesterol (PC) and silver-nanocomposites (SNCs) thereof have been studied for their efficient reduction of 4-nitrophenol (4-NP) to 4-aminophenol (4-AP) in the presence of aqueous sodium borohydride. Since in-situ silver doping will be effective in ethanol and acetone solvents with a PC gelator, two silver-loaded PC xerogels were prepared and successive SNCs were achieved by using an environmentally benign trisodium citrate dehydrate reducing agent. The formed PC xerogels and their SNCs were comprehensively investigated using different physico-chemical techniques, such as field emission scanning electron microscopy (FE-SEM), Fourier transform infrared (FTIR) spectroscopy, thermogravimetric analysis (TGA), powdered X-ray diffraction (XRD) and UV-Visible spectroscopy (UV-Vis). The FE-SEM results confirm that the shape of xerogel-covered silver nanoparticles (SNPs) are roughly spherical, with an average size in the range of 30–80 nm. Thermal degradation studies were analyzed via the sensitive graphical Broido’s method using a TGA technique. Both SNC-PC (SNC-PC-X1 and SNC-PC-X2) xerogels showed remarkable catalytic performances, with recyclable conversion efficiency of around 82% after the fourth consecutive run. The apparent rate constant (k_app) of SNC-PC-X1 and SNC-PC-X2 were found to be 6.120 × 10^-3 sec^-1 and 3.758 × 10^-3 sec^-1, respectively, at an ambient temperature.

σ-H-H, σ-C-H, and σ-Si-H Bond Activation Catalyzed by Metal Nanoparticles

Activation of H-H, Si-H, and C-H bonds through σ-bond coordination has grown in the past 30 years from a scientific curiosity to an important tool in the functionalization of hydrocarbons. Several mechanisms were discovered via which the initially σ-bonded substrate could be converted: oxidative addition, heterolytic cleavage, σ-bond metathesis, electrophilic attack, etc. The use of metal nanoparticles (NPs) in this area is a more recent development, but obviously nanoparticles offer a much richer basis than classical homogeneous and heterogeneous catalysts for tuning reactivity for such a demanding process as C-H functionalization. Here, we will review the surface chemistry of nanoparticles and catalytic reactions occurring in the liquid phase, catalyzed by either colloidal or supported metal NPs. We consider nanoparticles prepared in solution, which are stabilized and tuned by polymers, ligands, and supports. The question we have addressed concerns the differences and similarities between molecular complexes and metal NPs in their reactivity toward σ-bond activation and functionalization.

Polymeric graphitic carbon nitride (g-C3N4)-based semiconducting nanostructured materials: Synthesis methods, properties and photocatalytic applications

In recent years, various facile and low-cost methods have been developed for the synthesis of advanced nanostructured photocatalytic materials. These catalysts are required to mitigate the energy crisis, environmental deterioration, including water and air pollution. Among the various semiconductors explored, recently novel classes of polymeric graphitic carbon nitride (g-C₃N₄)-based heterogeneous photocatalysts have established much greater importance because of their unique physiochemical properties, large surface area, low price, and long service life, ease of synthesis, product scalability, controllable band gap properties, low toxicity, and high photocatalytic activity. The present comprehensive review focuses on recent achievements in a number of facile chemical synthesis methods for semiconducting polymeric carbon nitrides and their heterogeneous nanohybrids with various dopants, nanostructured metals, metal oxides, and nanocarbons, as well as the parameters influencing their physiochemical properties and photocatalytic efficiency, which are discussed with reference to various catalytic applications such as air (NO_x) purification, wastewater treatment, hydrogen generation, CO₂ reduction, and chemical transformation. The mechanisms for the superior photocatalytic activity of polymeric g-C₃N₄-based heterogeneous photocatalysts are also discussed. Finally, the challenges, prospects, and future directions for photocatalytic polymeric g-C₃N₄-based semiconducting materials are described.

Zn-Co@N-Doped Carbon Derived from ZIFs for High-Efficiency Synthesis of Ethyl Methyl Carbonate: The Formation of ZnO and the Interaction between Co and Zn

In this work, a series of Zn-Co@N-doped carbon materials were prepared by pyrolysis of Co/Zn-ZIF precursors under a N2 atmosphere and used for high-efficiency synthesis of ethyl methyl carbonate (EMC) from dimethyl carbonate (DMC) and diethyl carbonate (DEC). The Co to Zn molar ratio and calcination temperature were varied to study the physical and chemical properties of Zn-Co@N-doped carbon materials identified by X-ray diffraction (XRD), scanning electron microscopy (SEM), transmission electron microscopy (TEM), X-ray photoelectron spectroscopy (XPS), Brunauer-Emmett-Teller (BET), inductively coupled plasma (ICP), thermogravimetric analysis (TG) and temperature programmed desorption (TPD) analysis. It was deduced that the formation of a ZnO crystalline structure and the interaction between zinc and cobalt providing weak basic sites and strong basic sites, respectively, in different samples significantly affected their catalytic performance. The catalyst activated the reaction most effectively when the Co to Zn molar ratio was 1.0 and calcination temperature was 600 °C. With the DMC to DEC molar ratio controlled at 1:1, a superior yield of around 51.50% of product EMC can be gained over catalyst ZnCo/NC-600 at 100 °C with 1 wt% catalyst loading in 7 h.

Visible light-driven oxidation of vanillyl alcohol in air with Au–Pd bimetallic nanoparticles on phosphorylated hydrotalcite

This catalyst could recurrently realize the production of vanillin from vanilla alcohol under mild reaction conditions due to the synergistically double dehydrogenative oxidation (SDDO).

Heterogeneity of polyoxometalates by confining within ordered mesopores: toward efficient oxidation of benzene to phenol

Polyoxometalates@ordered mesoporous polymers have been prepared by a mechanochemical coordination assembly with tannin as the renewable precursor.

Fabrication of nanostructured NiO/WO3with graphitic carbon nitride for visible light driven photocatalytic hydroxylation of benzene and metronidazole degradation

Fabrication of a novel NiO/WO₃nanohybrid modified graphitic carbon nitride nanosheets with enhanced photocatalytic activity towards photocatalytic hydroxylation of benzene and degradation of a pharmaceutical waste metronidazole.

One-Pot Fabrication of Perforated Graphitic Carbon Nitride Nanosheets Decorated with Copper Oxide by Controlled Ammonia and Sulfur Trioxide Release for Enhanced Catalytic Activity

In this article, we have judiciously interfaced copper oxides with graphitic carbon nitride (g-C₃N₄) from thermal reaction of melamine and copper sulfate in a one-pot protocol and manipulated the perforated sheet morphology thereafter. The CCN-X (X = 30, 40, 50, 60, and 70, depending on the wt % of CuSO₄·5H₂O) nanocomposites were prepared by homogenously mixing different percentages of CuSO₄·5H₂O with melamine from a solid-state thermal reaction in a furnace in air. Drastic lowering of CuSO₄ decomposition temperature due to Cu(II)-amine complex formation and subsequent reduction of Cu(II) species by in situ produced ammonia (NH₃) resulted in the production of CuO and catalytic amount of Cu₂O, homogeneously dispersed within the perforated g-C₃N₄ nanosheet. How perforated sheet morphology evolved by combined effect of NH₃, released from thermal condensation of melamine ensuring two-dimensional (2D) growth, and sulfur trioxide (SO₃), expelled from CuSO₄·5H₂O facilitating the perforation, yielding better catalytic performance, has been elucidated. Excess NH₃ from added NH₄Cl removed perforation and ensued a marked decrease in efficacy. However, a high proportion of CuSO₄·5H₂O ruptured the framework of 2D sheets because of excess SO₃ evolution. Among the different nanocomposites synthesized, CCN-40 (CuO-Cu₂O/g-C₃N₄) showed the highest catalytic activity for 4-nitrophenol reduction. Thus, enhanced efficiency of the copper oxide catalyst by interfacing it with an otherwise inactive g-C₃N₄ platform was achieved.

Bimetallic Au-Pd nanoparticles on 2D supported graphitic carbon nitride and reduced graphene oxide sheets: A comparative photocatalytic degradation study of organic pollutants in water

Novel and sustainable bimetallic nanoparticles of Au-Pd on 2D graphitic carbon nitride (g-C₃N₄) and reduced graphene oxide (rGO) sheets was designed adopting an eco-friendly chemical route to obtain Au-Pd/g-C₃N₄ and Au-Pd/rGO, respectively. Elimination of hazardous pollutants, particularly phenol from water is urgent for environment remediation due to its significant carcinogenicity. Considering this aspect, the Au-Pd/g-C₃N₄ and Au-Pd/rGO nanocomposites are used as photocatalyst towards degradation of toxic phenol, 2-chlorophenol (2-CP) and 2-nitrophenol (2-NP) under natural sunlight and UV light irradiation. Au-Pd/g-C₃N₄ nanocomposite exhibited higher activity then Au/g-C₃N₄, Pd/g-C₃N₄ and Au-Pd/rGO nanocomposites with more than 95% degradation in 180 min under sunlight. The obtained degradation efficiency of our materials is better than many other reported photocatalysts. Incorporation of nitrogen atoms in the carbon skeleton of g-C₃N₄ provides much better properties to Au-Pd/g-C₃N₄ nanocomposite than carbon based Au-Pd/rGO leading to its higher degradation efficiency. Due to the presence of these nitrogen atoms and some defects, g-C₃N₄ possesses appealing electrical, chemical and functional properties. Photoluminescence results further revealed the efficient charge separation and delayed recombination of photo-induced electron-hole pairs in the Au-Pd/g-C₃N₄ nanocomposite. Generation of reactive oxygen species during photocatalysis is well explained through photoluminescence study and the sustainability of these photocatalyst was ascertained through reusability study up to eight and five consecutive cycles for Au-Pd/g-C₃N₄ and Au-Pd/rGO nanocomposites, respectively without substantial loss in its activity. Characterization of the photocatalysts after reaction signified the stability of the nanocomposites and added advantage to our developed photocatalytic system.

Photocatalytic oxidation of benzene to phenol using dioxygen as an oxygen source and water as an electron source in the presence of a cobalt catalyst

The present study reports the first example of photocatalytic hydroxylation of benzene with O₂ and H₂O, both of which are the most green reagents, under visible light irradiation to afford a high turnover number.

Photocatalytic hydroxylation of benzene to phenol by dioxygen (O₂) occurs under visible light irradiation of an O₂-saturated acetonitrile solution containing [Ru^II(Me₂phen)₃]²⁺ as a photocatalyst, [Co^III(Cp*)(bpy)(H₂O)]²⁺ as an efficient catalyst for both the water oxidation and benzene hydroxylation reactions, and water as an electron source in the presence of Sc(NO₃)₃. The present study reports the first example of photocatalytic hydroxylation of benzene with O₂ and H₂O, both of which are the most green reagents, under visible light irradiation to afford a high turnover number (e.g., >500). Mechanistic studies revealed that the photocatalytic reduction of O₂ to H₂O₂ is the rate-determining step, followed by efficient catalytic hydroxylation of benzene to phenol with H₂O₂, paving a new way for the photocatalytic oxygenation of substrates by O₂ and water.