Improved Butanol Production Using FASII Pathway in E. coli

Microbial host engineering for sustainable isobutanol production from renewable resources

Due to the limited resources and environmental problems associated with fossil fuels, there is a growing interest in utilizing renewable resources for the production of biofuels through microbial fermentation. Isobutanol is a promising biofuel that could potentially replace gasoline. However, its production efficiency is currently limited by the use of naturally isolated microorganisms. These naturally isolated microorganisms often encounter problems such as a limited range of substrates, low tolerance to solvents or inhibitors, feedback inhibition, and an imbalanced redox state. This makes it difficult to improve their production efficiency through traditional process optimization methods. Fortunately, recent advancements in genetic engineering technologies have made it possible to enhance microbial hosts for the increased production of isobutanol from renewable resources. This review provides a summary of the strategies and synthetic biology approaches that have been employed in the past few years to improve naturally isolated or non-natural microbial hosts for the enhanced production of isobutanol by utilizing different renewable resources. Furthermore, it also discusses the challenges that are faced by engineered microbial hosts and presents future perspectives to enhancing isobutanol production. KEY POINTS: • Promising potential of isobutanol to replace gasoline • Engineering of native and non-native microbial host for isobutanol production • Challenges and opportunities for enhanced isobutanol production.

Engineering Escherichia coli for Isobutanol Production from Xylose or Glucose-Xylose Mixture

Aiming to overcome the depletion of fossil fuels and serious environmental pollution, biofuels such as isobutanol have garnered increased attention. Among different synthesis methods, the microbial fermentation of isobutanol from raw substrate is a promising strategy due to its low cost and environmentally friendly and optically pure products. As an important component of lignocellulosics and the second most common sugar in nature, xylose has become a promising renewable resource for microbial production. However, bottlenecks in xylose utilization limit its wide application as substrates. In this work, an isobutanol synthetic pathway from xylose was first constructed in E. coli MG1655 through the combination of the Ehrlich and Dahms pathways. The engineering of xylose transport and electron transport chain complexes further improved xylose assimilation and isobutanol production. By optimizing xylose supplement concentration, the recombinant E. coli strain BWL4 could produce 485.35 mg/L isobutanol from 20 g/L of xylose. To our knowledge, this is the first report related to isobutanol production using xylose as a sole carbon source in E. coli. Additionally, a glucose-xylose mixture was utilized as the carbon source. The Entner-Doudorof pathway was used to assimilate glucose, and the Ehrlich pathway was applied for isobutanol production. After carefully engineering the recombinant E. coli, strain BWL9 could produce 528.72 mg/L isobutanol from a mixture of 20 g/L glucose and 10 g/L xylose. The engineering strategies applied in this work provide a useful reference for the microbial production of isobutanol from xylose or glucose-xylose mixture.

Advances in biosynthesis of higher alcohols in Escherichia coli

In recent years, the development of green energy to replace fossil fuels has been the focus of research. Higher alcohols are important biofuels and chemicals. The production of higher alcohols in microbes has gained attention due to its environmentally friendly character. Higher alcohols have been synthesized in model microorganism Escherichia coli, and the production has reached the gram level through enhancement of metabolic flow, the balance of reducing power and the optimization of fermentation processes. Sustainable bio-higher alcohols production is expected to replace fossil fuels as a green and renewable energy source. Therefore, this review summarizes the latest developments in producing higher alcohols (C3-C6) by E. coli, elucidate the main bottlenecks limiting the biosynthesis of higher alcohols, and proposes potential engineering strategies of improving the production of biological higher alcohols. This review would provide a theoretical basis for further research on higher alcohols production by E. coli.

Isobutanol production by combined in vivo and in vitro metabolic engineering

The production of the biofuel, isobutanol, in E. coli faces limitations due to alcohol toxicity, product inhibition, product recovery, and long-term industrial feasibility. Here we demonstrate an approach of combining both in vivo with in vitro metabolic engineering to produce isobutanol. The in vivo production of α-ketoisovalerate (KIV) was conducted through CRISPR mediated integration of the KIV pathway in bicistronic design (BCD) in E. coli and inhibition of competitive valine pathway using CRISPRi technology. The subsequent in vitro conversion to isobutanol was carried out with engineered enzymes for 2-ketoacid decarboxylase (KIVD) and alcohol dehydrogenase (ADH). For the in vivo production of KIV and subsequent in vitro production of isobutanol, this two-step serial approach resulted in yields of 56% and 93%, productivities of 0.62 and 0.074 g L^-1 h^-1, and titers of 5.6 and 1.78 g L^-1, respectively. Thus, this combined biosynthetic system can be used as a modular approach for producing important metabolites, like isobutanol, without the limitations associated with in vivo production using a consolidated bioprocess.

An updated review on advancement in fermentative production strategies for biobutanol using Clostridium spp

A significant concern of our fuel-dependent era is the unceasing exhaustion of petroleum fuel supplies. In parallel to this, environmental issues such as the greenhouse effect, change in global climate, and increasing global temperature must be addressed on a priority basis. Biobutanol, which has fuel characteristics comparable to gasoline, has attracted global attention as a viable green fuel alternative among the many biofuel alternatives. Renewable biomass could be used for the sustainable production of biobutanol by the acetone-butanol-ethanol (ABE) pathway. Non-extinguishable resources, such as algal and lignocellulosic biomass, and starch are some of the most commonly used feedstock for fermentative production of biobutanol, and each has its particular set of advantages. Clostridium, a gram-positive endospore-forming bacterium that can produce a range of compounds, along with n-butanol is traditionally known for its biobutanol production capabilities. Clostridium fermentation produces biobased n-butanol through ABE fermentation. However, low butanol titer, a lack of suitable feedstock, and product inhibition are the primary difficulties in biobutanol synthesis. Critical issues that are essential for sustainable production of biobutanol include (i) developing high butanol titer producing strains utilizing genetic and metabolic engineering approaches, (ii) renewable biomass that could be used for biobutanol production at a larger scale, and (iii) addressing the limits of traditional batch fermentation by integrated bioprocessing technologies with effective product recovery procedures that have increased the efficiency of biobutanol synthesis. Our paper reviews the current progress in all three aspects of butanol production and presents recent data on current practices in fermentative biobutanol production technology.

Engineering E. coli to synthesize butanol

Biobutanol is gaining much attention as a potential biofuel due to its superior properties over ethanol. Butanol has been naturally produced via acetone-butanol-ethanol (ABE) fermentation by many Clostridium species, which are not very user-friendly bacteria. Therefore, to improve butanol titers and yield, various butanol synthesis pathways have been engineered in Escherichia coli, a much more robust and convenient host than Clostridium species. This review mainly focuses on the biosynthesis of n-butanol in engineered E. coli with an emphasis on efficient enzymes for butanol production in E. coli, butanol competing pathways, and genome engineering of E. coli for butanol production. In addition, the use of alternate strategies for butanol biosynthesis/enhancement, alternate substrates for the low cost of butanol production, and genetic improvement for butanol tolerance in E. coli have also been discussed.

A genetic toolkit for co-expression of multiple proteins of diverse physiological implication

Construction of plasmids is crucial for expression of functional proteins of diverse physiological impact in E. coli. Here, we first designed and constructed a novel pair of bacterial expression vectors, i.e., pAS01 and pAS02, to be co-transformed with pQE30 for the co-expression of three target genes. The three plasmids contain ColE1, p15A and pSC101 origin of replication for high, medium and low copy plasmids, respectively, and same promoter (T5) and RBS. We then cloned genes encoding three reporter proteins (GFPuv, TurboRFP, and EYFP) in each of these plasmids and co-expressed in E. coli in six different combinations. Each of these reporter proteins exhibited diverse impact on growth, plasmid copy number and stability, and expression of other reporter proteins. Our results indicate that GFP and RFP were the most and the least favorable proteins for the cells, respectively, in terms of these parameters, especially on impacting expression of other co-expressed proteins.

Modular optimization in metabolic engineering

There is an increasing demand for bioproducts produced by metabolically engineered microbes, such as pharmaceuticals, biofuels, biochemicals and other high value compounds. In order to meet this demand, modular optimization, the optimizing of subsections instead of the whole system, has been adopted to engineer cells to overproduce products. Research into modularity has focused on traditional approaches such as DNA, RNA, and protein-level modularity of intercellular machinery, by optimizing metabolic pathways for enhanced production. While research into these traditional approaches continues, limitations such as scale-up and time cost hold them back from wider use, while at the same time there is a shift to more novel methods, such as moving from episomal expression to chromosomal integration. Recently, nontraditional approaches such as co-culture systems and cell-free metabolic engineering (CFME) are being investigated for modular optimization. Co-culture modularity looks to optimally divide the metabolic burden between different hosts. CFME seeks to modularly optimize metabolic pathways in vitro, both speeding up the design of such systems and eliminating the issues associated with live hosts. In this review we will examine both traditional and nontraditional approaches for modular optimization, examining recent developments and discussing issues and emerging solutions for future research in metabolic engineering.