Shaping Liposomes by Cell-Free Expressed Bacterial Microtubules

Artificial Methylotrophic Cells via Bottom-Up Integration of a Methanol-Utilizing Pathway

Methanol has gained substantial attention as a substrate for biomanufacturing due to plentiful stocks and nonreliance on agriculture, and it can be sourced renewably. However, due to inevitable complexities in cell metabolism, microbial methanol conversion requires further improvement before industrial applicability. Here, we present a novel, parallel strategy using artificial cells to provide a simplified and well-defined environment for methanol utilization as artificial methylotrophic cells. We compartmentalized a methanol-utilizing enzyme cascade, including NAD-dependent methanol dehydrogenase (Mdh) and pyruvate-dependent aldolase (KHB aldolase), in cell-sized lipid vesicles using the inverted emulsion method. The reduction of cofactor NAD+ to NADH was used to quantify the conversion of methanol within individual artificial methylotrophic cells via flow cytometry. Compartmentalization of the reaction cascade in liposomes led to a 4-fold higher NADH production compared with bulk enzyme experiments, and the incorporation of KHB aldolase facilitated another 2-fold increase above the Mdh-only reaction. This methanol-utilizing platform can serve as an alternative route to speed up methanol biological conversion, eventually shifting sugar-based bioproduction toward a sustainable methanol bioeconomy.

Lipid vesicle-based molecular robots

A molecular robot, which is a system comprised of one or more molecular machines and computers, can execute sophisticated tasks in many fields that span from nanomedicine to green nanotechnology. The core parts of molecular robots are fairly consistent from system to system and always include (i) a body to encapsulate molecular machines, (ii) sensors to capture signals, (iii) computers to make decisions, and (iv) actuators to perform tasks. This review aims to provide an overview of approaches and considerations to develop molecular robots. We first introduce the basic technologies required for constructing the core parts of molecular robots, describe the recent progress towards achieving higher functionality, and subsequently discuss the current challenges and outlook. We also highlight the applications of molecular robots in sensing biomarkers, signal communications with living cells, and conversion of energy. Although molecular robots are still in their infancy, they will unquestionably initiate massive change in biomedical and environmental technology in the not too distant future.

Functional metal-phenolic cortical cytoskeleton for artificial cells

Cortex-like cytoskeleton, a thin layer of cross-linked cytoplasmic proteins underlying the cell membrane, plays an essential role in modulating membrane behavior and cell surface properties. However, bottom-up construction of functional cortex-like cytoskeleton in artificial cells remains a challenge. Here, we present metal-phenolic networks as artificial cortical cytoskeletons in liposome-based artificial cells. The metal-phenolic cytoskeleton-reinforced artificial cells exhibit long-term stability, enhanced resistance to a variety of harsh environments, tunable permeability, and well-controlled morphologies. We anticipate that our stable artificial cell models will stride forward to practical applications of liposome-based microsystem.

Exploring Giant Unilamellar Vesicle Production for Artificial Cells - Current Challenges and Future Directions

Creating an artificial cell from the bottom up is a long-standing challenge and, while significant progress has been made, the full realization of this goal remains elusive. Arguably, one of the biggest hurdles that researchers are facing now is the assembly of different modules of cell function inside a single container. Giant unilamellar vesicles (GUVs) have emerged as a suitable container with many methods available for their production. Well-studied swelling-based methods offer a wide range of lipid compositions but at the expense of limited encapsulation efficiency. Emulsion-based methods, on the other hand, excel at encapsulation but are only effective with a limited set of membrane compositions and may entrap residual additives in the lipid bilayer. Since the ultimate artificial cell will need to comply with both specific membrane and encapsulation requirements, there is still no one-method-fits-all solution for GUV formation available today. This review discusses the state of the art in different GUV production methods and their compatibility with GUV requirements and operational requirements such as reproducibility and ease of use. It concludes by identifying the most pressing issues and proposes potential avenues for future research to bring us one step closer to turning artificial cells into a reality.

Interfacing Coacervates with Membranes: From Artificial Organelles and Hybrid Protocells to Intracellular Delivery

Compartmentalization is crucial for the functioning of cells. Membranes enclose and protect the cell, regulate the transport of molecules entering and exiting the cell, and organize cellular machinery in subcompartments. In addition, membraneless condensates, or coacervates, offer dynamic compartments that act as biomolecular storage centers, organizational hubs, or reaction crucibles. Emerging evidence shows that phase-separated membraneless bodies in the cell are involved in a wide range of functional interactions with cellular membranes, leading to transmembrane signaling, membrane remodeling, intracellular transport, and vesicle formation. Such functional and dynamic interplay between phase-separated droplets and membranes also offers many potential benefits to artificial cells, as shown by recent studies involving coacervates and liposomes. Depending on the relative sizes and interaction strength between coacervates and membranes, coacervates can serve as artificial membraneless organelles inside liposomes, as templates for membrane assembly and hybrid artificial cell formation, as membrane remodelers for tubulation and possibly division, and finally, as cargo containers for transport and delivery of biomolecules across membranes by endocytosis or direct membrane crossing. Here, recent experimental examples of each of these functions are reviewed and the underlying physicochemical principles and possible future applications are discussed.

Optimizing conditions to construct artificial cells using commercial in vitro transcription-translation system (PUREfrex2.0)

Artificial cells containing in vitro transcription and translation (IVTT) systems inside liposomes are important for the reconstruction and analysis of various biological systems. To improve the accessibility of artificial cell research, it is important that artificial cells can be constructed using only commercially available components. Here, we optimized the construction of artificial cells containing PUREfrex2.0, a commercially available IVTT with high transcriptional and translational activity. Specifically, the composition of the inner and outer s olutions of the liposomes and the concentrations of lipids, glucose/sucrose, potassium glutamate, and magnesium acetate were systematically optimized, and finally we found a protocol for the stable construction of artificial cells containing PUREfre×2.0. These findings are expected to be important in expanding the artificial cell research community.

Imaging Flow Cytometry for High-Throughput Phenotyping of Synthetic Cells

The reconstitution of basic cellular functions in micrometer-sized liposomes has led to a surge of interest in the construction of synthetic cells. Microscopy and flow cytometry are powerful tools for characterizing biological processes in liposomes with fluorescence readouts. However, applying each method separately leads to a compromise between information-rich imaging by microscopy and statistical population analysis by flow cytometry. To address this shortcoming, we here introduce imaging flow cytometry (IFC) for high-throughput, microscopy-based screening of gene-expressing liposomes in laminar flow. We developed a comprehensive pipeline and analysis toolset based on a commercial IFC instrument and software. About 60 thousands of liposome events were collected per run starting from one microliter of the stock liposome solution. Robust population statistics from individual liposome images was performed based on fluorescence and morphological parameters. This allowed us to quantify complex phenotypes covering a wide range of liposomal states that are relevant for building a synthetic cell. The general applicability, current workflow limitations, and future prospects of IFC in synthetic cell research are finally discussed.

Gene-Directed FtsZ Ring Assembly Generates Constricted Liposomes with Stable Membrane Necks

Mimicking bacterial cell division in well-defined cell-free systems has the potential to elucidate the minimal set of proteins required for cytoskeletal formation, membrane constriction, and final abscission. Membrane-anchored FtsZ polymers are often regarded as a sufficient system to realize this chain of events. By using purified FtsZ and its membrane-binding protein FtsA or the gain-of-function mutant FtsA* expressed in PURE (Protein synthesis Using Reconstituted Elements) from a DNA template, it is shown in this study that cytoskeletal structures are formed, and yield constricted liposomes exhibiting various morphologies. However, the resulting buds remain attached to the parental liposome by a narrow membrane neck. No division events can be monitored even after long-time tracking by fluorescence microscopy, nor when the osmolarity of the external solution is increased. The results provide evidence that reconstituted FtsA-FtsZ proto-rings coating the membrane necks are too stable to enable abscission. The prospect of combining a DNA-encoded FtsZ system with assisting mechanisms to achieve synthetic cell division is discussed.

Compartmentalized Cell-Free Expression Systems for Building Synthetic Cells

One of the grand challenges in bottom-up synthetic biology is the design and construction of synthetic cellular systems. One strategy toward this goal is the systematic reconstitution of biological processes using purified or non-living molecular components to recreate specific cellular functions such as metabolism, intercellular communication, signal transduction, and growth and division. Cell-free expression systems (CFES) are in vitro reconstitutions of the transcription and translation machinery found in cells and are a key technology for bottom-up synthetic biology. The open and simplified reaction environment of CFES has helped researchers discover fundamental concepts in the molecular biology of the cell. In recent decades, there has been a drive to encapsulate CFES reactions into cell-like compartments with the aim of building synthetic cells and multicellular systems. In this chapter, we discuss recent progress in compartmentalizing CFES to build simple and minimal models of biological processes that can help provide a better understanding of the process of self-assembly in molecularly complex systems.

Effects of Charged Lipids on Giant Unilamellar Vesicle Fusion and Inner Content Mixing via Freeze-Thawing

Fusion between giant unilamellar vesicles (GUVs) can incorporate and mix components of biochemical reactions. Recently, GUV fusion induced by freeze-thawing (F/T) was employed to construct artificial cells that can easily and repeatedly fuse GUVs with efficient content mixing. However, GUVs were ruptured during F/T, and the inner contents leaked. Herein, we investigated the effects of charged lipids on GUV fusion via F/T. The presence of 10 %-50 % (w/w%) negatively charged lipids in GUV membranes, mainly composed of the neutral charged lipid 1-palmitoyl-2-oleoyl-sn-glycero-3-phosphocholine (POPC), improved resistance to GUV rupture and decreased inner content leakage. Furthermore, we found that the presence of positively charged lipids in GUV membranes elevated GUV rupture compared with F/T between GUVs containing POPC alone. Modified GUVs may better incorporate nutrients and lipid membranes with less damage following GUV fusion via F/T, providing an improved artificial model.

Liposome-based artificial cells: From gene expression to reconstitution of cellular functions and phenotypes

Bottom-up approaches in creating artificial cells that can mimic natural cells have significant implications for both basic research and translational application. Among various artificial cell models, liposome is one of the most sophisticated systems. By encapsulating proteins and associated biomolecules, they can functionally reconstitute foundational features of biological cells, such as the ability to divide, communicate, and undergo shape deformation. Yet constructing liposome artificial cells from the genetic level, which is central to generate self-sustained systems remains highly challenging. Indeed, many studies have successfully established the expression of gene-coded proteins inside liposomes. Further, recent endeavors to build a direct integration of gene-expressed proteins for reconstituting molecular functions and phenotypes in liposomes have also significantly increased. Thus, this review presents the development of liposome-based artificial cells to demonstrate the process of gene-expressed proteins and their reconstitution to perform desired molecular and cell-like functions. The molecular and cellular phenotypes discussed here include the self-production of membrane phospholipids, division, shape deformation, self-DNA/RNA replication, fusion, and intercellular communication. Together, this review gives a comprehensive overview of gene-expressing liposomes that can stimulate further research of this technology and achieve artificial cells with superior properties in the future.